Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IONIC CONDUCTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Composite electrolytes ceramic Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}/glassy Li{sub 2}O-Y{sub 2}O{sub 3}-SiO{sub 2}

Highlights: • We synthesized Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}-x wt% 40.2Li{sub 2}O·5.7Y{sub 2}O{sub 3}·54.1SiO{sub 2} (x = 1–10) composites. • Density of the composite samples is higher than one of the sintered Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}. • The composition with x = 5 has high total conductivity, 2.5 × 10{sup −5} S cm{sup −1} at 25 °C. - Abstract: We have investigated the effect of lithium yttrium-silicate glass 40.2Li{sub 2}O·5.7Y{sub 2}O{sub 3}·54.1SiO{sub 2} on the density and total conductivity of tetragonal Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}. An optimal sintering temperature (1200 °C) was selected on the basis of a composite with 1 wt% of the glass having the highest density and total conductivity after annealing at this temperature. A series of composites Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}-x wt% 40.2Li{sub 2}O·5.7Y{sub 2}O{sub 3}·54.1SiO{sub 2} (x = 1–10) was prepared. The samples were characterized by X-ray diffraction, scanning electron microscopy and differential scanning calorimetry. The data revealed that the sintering additive interacted with Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}, causing the glass to crystallize during annealing. The conductivity of the composites was studied using complex impedance spectroscopy over a temperature range of 20–250 °C. The composite with x = 5 exhibited the highest total conductivity at room temperature: 2.5 × 10{sup −5} S cm{sup −1}.

36 MATERIALS SCIENCE↗

Modeling a High-Temperature Electrochemically Driven Water-Gas-Shift Process Using a Mixed-Conducting Membrane without External Electrical Power

This paper develops a model to predict and interpret the performance of an elevated-temperature, electrochemical, membrane-assisted, water-gas-shift process. The process uses separated feed streams of H 2 O and CO to produce separated streams of H 2 and CO 2 , without an external electrical power source. The dense ceramic membrane is mixed ionic-electronic-conducting (MIEC) gadolinium-doped ceria (GDC) and the porous composite electrodes are Ni-YSZ. At elevated temperature, GDC conducts both oxygen ions and small polarons. The present process uses chemical potential to drive the process. Electrochemical oxidation of CO proceeds within the composite anode and H 2 O reduction proceeds within the composite cathode. At high temperature (e.g., T > 700 °C), GDC has significant electronic leakage in the form of a reduced-cerium small polaron, which supports the charge-transfer reactions. In a typical electrolyzer or fuel cell, this leakage is significantly problematic. However, the present process depends on the leakage current to complete the electrochemical circuit. Model development and validation is based on measured material properties and reactor performance. Potential applications include using CO-rich blast-furnace off gases in steel processing, producing separated streams of H 2 and CO 2 .

Zhu, Huayang↗

Effects of oxygen vacancies on dielectric, electrical, and ferroelectric properties of Ba{sub 4}Nd{sub 2}Fe{sub 2}Nb{sub 8}O{sub 30} ceramics

Effects of oxygen vacancies on the dielectric, electrical, and ferroelectric properties of Ba{sub 4}Nd{sub 2}Fe{sub 2}Nb{sub 8}O{sub 30} ceramics were investigated. A dielectric relaxation above T{sub c} can be ascribed to the trap-controlled ac conduction around doubly ionized oxygen vacancies. The dc conductivity of the N{sub 2}-annealed and O{sub 2}-annealed samples is attributed to the long-range motion of the V{sub o}{sup ⋅⋅}, and that of the as-sintered sample is considered to be governed by the electronic and oxygen-vacancy ionic mixed conduction mechanism. Low concentration and random distributed oxygen vacancies are propitious to the domain switching, while high concentration and allied oxygen defects hinder the domain-wall movement.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Partial substitution of Mo{sup 6+} by S{sup 6+} in the fast oxide ion conductor La{sub 2}Mo{sub 2}O{sub 9}: Synthesis, structure and sulfur depletion

Powder-solid state reaction route using La{sub 2}(SO{sub 4}){sub 3} as sulfur source was used to prepare compositions of the solid solution La{sub 2}Mo{sub 2-y}S{sub y}O{sub 9}. Single phases were only obtained in the substitution range extending up to y=0.8 (40 mol% S) at the annealing temperature of 850 Degree-Sign C with regard to the limit of stability of the lanthanum sulphate reactant. Within the synthesis conditions, a stabilization of the high temperature {beta}-form is observed from and above y=0.1 (5 mol% S). Temperature-controlled X-ray diffraction and thermogravimetric analyses have shown that La{sub 2}Mo{sub 2-y}S{sub y}O{sub 9} raw powders undergo thermal decompositions in two steps. Heating above 900 Degree-Sign C, a sulfur depletion to the benefit of molybdenum in La{sub 2}Mo{sub 2-y}S{sub y}O{sub 9} raw powders leads to the formation of La{sub 2}SO{sub 6}. At higher temperature, the exsolved La{sub 2}SO{sub 6} phase then decomposes into La{sub 2}O{sub 3}, which in turn reacts with the sulfur-depleted La{sub 2}Mo{sub 2}O{sub 9} phase to form La{sub 2}MoO{sub 6}. The present study also reveals that depending on the substitution rate y, the sulfur depletion can be induced by ball-milling of raw powders. Along the La{sub 2}Mo{sub 2-y}S{sub y}O{sub 9} series, the isovalent substitution of molybdenum by sulfur tends to restrict in magnitude, or even to suppress above 400 Degree-Sign C, the distortive thermal expansion of the cubic {beta}-type structure, thus strongly decreasing the conductance at high temperature. - Graphical abstract: La{sub 2}O{sub 3}-MoO{sub 3}-'SO{sub 3}' ternary phase diagram showing the exsolution path at low temperature (white arrows) and the total decomposition path at high temperature (black arrows) of {beta}-La{sub 2}Mo{sub 2-y}S{sub y}O{sub 9} raw powders. Highlights: Black-Right-Pointing-Pointer Isovalent substitution of molybdenum by sulfur in La{sub 2}Mo{sub 2}O{sub 9} up to 40 mol%. Black-Right-Pointing-Pointer Stabilization of the {beta}-form for a sulfur content greater than or equal to 5 mol%. Black-Right-Pointing-Pointer Decomposition by sulfur exsolution induced by thermal treatment or ball-milling. Black-Right-Pointing-Pointer Reduction or even cancellation of the distortive thermal expansion above 400 Degree-Sign C. Black-Right-Pointing-Pointer Decrease of conductance at high T involved by the low thermal expansion above 400 Degree-Sign C.

36 MATERIALS SCIENCE↗

Effect of swift heavy ion irradiation on conductivity and relaxation time in PVA-PEO-EC-LiCF{sub 3}SO{sub 3} blends

In the present work, the PVA-PEO-EC-LiCF{sub 3}SO{sub 3} blend specimens complexed with 3 wt%LiCF{sub 3}SO{sub 3} salt have been irradiated, using swift heavy O{sup 7+} ion irradiation of 80MeV. These blend films have been irradiated with four different fluences ranging from 1 Multiplication-Sign 10{sup 11} to 3 Multiplication-Sign 10{sup 12} ions/cm{sup 2}. Effect of radiations on conductivity, power law exponent and relaxation time of the films has been investigated in the present study. Conductivity is observed to enhance on increasing the fluence upto 3 Multiplication-Sign 10{sup 11} ions/cm{sup 2} and drops with further increment of fluence. However, all the irradiated blend specimens show higher conductivity as compared to pristine blend specimen.

36 MATERIALS SCIENCE↗

Specific features of phase transitions and the conduction of La{sub 2}Mo{sub 2}O{sub 9} oxide-ion conducting compound doped with vanadium

The X-ray powder analysis, calorimetric studies, and conductivity measurements of a series of ceramic La{sub 2}Mo{sub 2-x}V{sub x}O{sub y} specimens with different vanadium content are performed with the aim of following the dynamics of phase formation of the low-temperature {alpha}, high-temperature {beta}, and metastable {beta}{sub ms} phases. At x {>=} 0.06, the cubic phase becomes stable and the monoclinic phase vanishes; therefore, the main {alpha} {sup {yields}} {beta} transition is suppressed. According to the data of differential thermal analyses, a weak thermal anomaly is observed in the range 450-470{sup o}C at x {>=} 0.06. This anomaly is indicative of the {beta}{sub ms} {sup {yields}} {beta} transition due to the conversion of the cubic phase with statically disordered oxygen atoms into the cubic phase with dynamic disorder. The conductivity of the high-temperature {beta} phase obeys the Vogel-Tammann-Fulcher law.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation and characterisation of La{sub 10-x}Ge{sub 5.5}Al{sub 0.5}O{sub 26{+-}{delta}} apatites by freeze-drying precursor method

Nanocrystalline powders of La{sub 10-x}Ge{sub 5.5}Al{sub 0.5}O{sub 26{+-}{delta}} (x = 0-0.5) with an average crystallite size of 50 nm were prepared by a freeze-drying precursor method. These powders were used to obtain dense ceramic materials at rather low temperature as 1100-1200 {sup o}C for 1 h and to study the transport properties by impedance spectroscopy. The composition with the highest La-content (x = 0) exhibits a second-order phase transition from triclinic (P1-bar) to hexagonal (P6{sub 3}/m) space groups around 750 {sup o}C, whereas for x {>=} 0.2 the materials presents hexagonal structure in the whole temperature range studied. The thermal properties of these materials were investigated by high temperature X-ray diffraction (XRD), thermal analysis (TG/DTA) and impedance spectroscopy. These results confirmed the incorporation of water in the germanate-apatite structure. However, the conductivity resulted to be independent on the gas atmosphere used, which seems to indicate that the proton contribution to the overall conductivity is negligible in these materials.

36 MATERIALS SCIENCE↗

Anomaly diffuse and dielectric relaxation in strontium doped lanthanum molybdate

Highlights: Black-Right-Pointing-Pointer The anomaly diffuse and dielectric relaxation behaviors are fitted by the Cole-Cole approach. Black-Right-Pointing-Pointer The peak in the LSMO is corresponding to different oxygen ion diffusion process. Black-Right-Pointing-Pointer We first give better explanation about the strange conductivity change caused by doping. Black-Right-Pointing-Pointer The oxygen ion diffusion is due to a combination of the dipolar relaxation and the motion of ions. -- Abstract: The dielectric properties of the La{sub 2-x}Sr{sub x}Mo{sub 2}O{sub 9-{delta}} (x = 0-0.2) ceramics were investigated in the temperature range of 300-800 K. Dielectric measurement reveals that two dielectric anomalies, associated with the oxygen ion diffusion, exist in frequency spectrum with x = 0.5. The broad dielectric peaks in tan {delta}({omega}) can be well fitted by a modified Cole-Cole approach. When x = 0.1, only one dielectric relaxation peak is observed, corresponding to different oxygen ion diffusion processes, as distinct from the only relaxation peak in the pure La{sub 2}Mo{sub 2}O{sub 9}. The relaxation parameters {tau}{sub 0}, the dielectric relaxation strength {Delta}, and the activation energy E{sub a} were obtained. The result of this work shows that, the conductivity change caused by doping between the two phases is due to the combination of the dipolar effects and motion of ions.

36 MATERIALS SCIENCE↗

Reinvigorating Reverse-Osmosis Membrane Technology to Stabilize the V 2 O 5 Lithium-Ion Battery Cathode

V 2 O 5 is deemed as one of the most promising cathode materials for next-generation high-capacity lithium-ion batteries (LIBs). It possesses a theoretical capacity of 294 mAh g -1 , which is much higher than conventional cathodes. But, there are many issues to be solved before its practical use, including poor cycle life and unsatisfactory rate performance, mainly owing to its low electronic conductivity and ionic diffusivity, as well as structural instability. Our work reports three types of V 2 O 5 asymmetric membranes synthesized by using an adapted reverse-osmosis membrane technology combined with sol-gel chemistry, aiming to stabilize the cyclability and improve the rate performance. V 2 O 5 asymmetric membrane cathodes prepared using graphene as the conductive additives have a specific capacity of approximately 160 mAh g -1 at a current density of 100 mA g -1 with no capacity degradation after 380 cycles. It is also found that the annealing temperature and the choice of conductive additives can affect the morphology of V 2 O 5 nanoparticles and the overall electrode cyclability. Furthermore, we find that a lower annealing temperature (300 vs. 400 °C) and the addition of graphene are beneficial to long-term cycling performance.

25 ENERGY STORAGE↗

Positronium Formation Of Glyeisdyl Methacrylic Acid (GMA)/Styrene Grafted On PVDF Membrane For Fuel Cells

Simultaneous gamma irradiation was used effectively for grafting of glycidyl methacrylic acid and styrene onto Poly vinyldine fluoride (PVDF). Membranes were characterized by thermal gravimetric analysis (TGA) and scanning electron microscopy (SEM). The properties of the obtained membranes were evaluated in terms of proton conductivity, methanol permeability and positron annihilation lifetime (PALS) parameters. The high probability of Positronium formation enables the application of PALS to the study of free volume. Good property values approved the applicability of the membrane from the cost benefit point of view.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Generalized Drift-Diffusion Model In Semiconductors

A new drift-diffusion model is proposed based on the computation of the stationary nonlocal current density. The semi classical Boltzmann equation is solved keeping all the anisotropies of the distribution function with the use of the continued fractions. The conductivity is calculated in the linear approximation and for arbitrary collision frequency with respect to Kv{sub t} where K{sup -1} is the characteristic length scale of the system and V{sub t} is the thermal velocity. The nonlocal conductivity can be used to close the generalized drift-diffusion equations valid for arbitrary collisionality.

36 MATERIALS SCIENCE↗

Effect of silver addition on the microstructures and electrical responses of La(1.7)Sr(0.3)Mo(2)O(9 − δ) ceramics

Graphical abstract: Display Omitted Highlights: ► La{sub 1.7}Sr{sub 0.3}Mo{sub 2}O{sub 9−δ} (LSM) composites with Ag{sub 2}O were first prepared. ► Both the dipolar effects and motion of ions contribute on the dielectric anomalies. ► Two forms of silver atom coexist in the series of composites. ► Low concentrations of Ag in LSM ceramics led to increase in conductivity. ► Significant influence on the surface oxygen exchange properties in Ag added LSM. -- Abstract: Different amounts of silver (3–15 wt.% Ag{sub 2}O) have been mixed with ceramic powders based on La{sub 1.7}Sr{sub 0.3}Mo{sub 2}O{sub 9−δ} (LSM). XRD analysis indicated that the silver was chemically stable in LSM. TEM observation and XPS analysis showed that some metallic silver atoms presented random distribution in the LSM ceramic, while others entered into crystal lattice in the form of Ag{sup +}, efficiently stabilizing the cubic phase at the room temperature. And there were a great enhancement on conductivity in Ag added (<10 wt.% Ag{sub 2}O) LSM ceramics. Also addition of Ag had a significant influence on the surface oxygen exchange properties with electrode components.

36 MATERIALS SCIENCE↗

New chalcogenide glasses in the CdTe-AgI-As{sub 2}Te{sub 3} system

Highlights: Black-Right-Pointing-Pointer Determination of the glass-forming region in the pseudo-ternary CdTe-AgI-As{sub 2}Te{sub 3} system. Black-Right-Pointing-Pointer Characterization of macroscopic properties of the new CdTe-AgI-As{sub 2}Te{sub 3} glasses. Black-Right-Pointing-Pointer Characterization of the total conductivity of CdTe-AgI-As{sub 2}Te{sub 3} glasses. Black-Right-Pointing-Pointer Comparison between the selenide and telluride equivalent systems. -- Abstract: Chalcogenide glasses in the pseudo-ternary CdTe-AgI-As{sub 2}Te{sub 3} system were synthesized and the glass-forming range was determined. The maximum content of CdTe in this glass system was found to be equal to 15 mol.%. The macroscopic characterizations of samples have consisted in Differential Scanning Calorimetry, density, and X-ray diffraction measurements. The cadmium telluride addition does not generate any significant change in the glass transition temperature but the resistance of binary AgI-As{sub 2}Te{sub 3} glasses towards crystallisation is estimated to be decreasing on the base of {Delta}T = T{sub x} - T{sub g} parameter. The total electrical conductivity {sigma} was measured by complex impedance spectroscopy. First, the CdTe additions in the (AgI){sub 0.5}(As{sub 2}Te{sub 3}){sub 0.5} host glass, (CdTe){sub x}(AgI){sub 0.5-x/2}(As{sub 2}Te{sub 3}){sub 0.5-x/2} lead to a conductivity decrease at x {<=} 0.05. Then, the behaviour is reversed at 0.05 {<=} x {<=} 0.15. The obtained results are discussed by comparison with the equivalent selenide system.

36 MATERIALS SCIENCE↗

Reinforcing cycling stability and rate capability of LiNi0.5Mn1.5O4 cathode by dual-modification of coating and doping of a fast-ion conductor

Highlights: • Li{sub 2}SiO{sub 3}-modified LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} with well-defined octahedral morphology have been controllably obtained. • The combination of the modification of fast ions conductor and solid state method will be an optional method. • The cyclic performance and rate capability of LiNi{sub 0.5}Mn{sub 1.5}O{sub 4}-based materials have been significantly improved. - Abstract: A simple solid state method was utilized to synthesize excellent spinel Li{sub 2}SiO{sub 3}-modified LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} cathodes. Dual-modification of coating and doping of fast-ion conductor Li{sub 2}SiO{sub 3} leads to stable crystal structure and additional three-dimensional (3-D) channels for Li{sup +}-ion diffusion, and protects the electrode surface from electrolyte attack. The Li{sub 2}SiO{sub 3}-modified material possesses coexistence of ordered P4{sub 3}32 and disordered Fd-3m phases. As a result of improved structure, morphology and conductivity, the Li{sub 2}SiO{sub 3}-modified LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} shows more superior cyclic performance, rate capability and high temperature stability than the pristine: capacity retention of 95.17% at 0.1 C after 100 cycles vs. that of 79.23%; rate capability of 130–89.1 mAh g{sup −1} at 0.1–10 C vs. that of 120–57.6 mAh g{sup −1}; and high temperature capacity retention of 99.42% at 0.1 C vs. that of 79.59%. Our study provides a facile approach to stabilize crystal structure, optimize morphology and conductivity, and thus enhance electrochemical performance of LiNi{sub 0.5}Mn{sub 1.5}O{sub 4}-based materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fergusonite-type CeNbO{sub 4+δ}: Single crystal growth, symmetry revision and conductivity

Large fergusonite-type (ABO{sub 4}, A=Ce, B=Nb) oxide crystals, a prototype electrolyte composition for solid oxide fuel cells (SOFC), were prepared for the first time in a floating zone mirror furnace under air or argon atmospheres. While CeNbO{sub 4} grown in air contained CeNbO{sub 4.08} as a minor impurity that compromised structural analysis, the argon atmosphere yielded a single phase crystal of monoclinic CeNbO{sub 4}, as confirmed by selected area electron diffraction, powder and single crystal X-ray diffraction. The structure was determined in the standard space group setting C12/c1 (No. 15), rather than the commonly adopted I12/a1. AC impedance spectroscopy conducted under argon found that stoichiometric CeNbO{sub 4} single crystals showed lower conductivity compared to CeNbO{sub 4+δ} confirming interstitial oxygen can penetrate through fergusonite and is responsible for the higher conductivity associated with these oxides. - Graphical abstract: Large fergusonite-type CeNbO{sub 4} crystals were prepared for the first time in a floating zone mirror furnace. Crystal growth in an argon atmosphere yielded a single phase monoclinic CeNbO4, as confirmed by selected area electron diffraction, powder and single crystal X-ray diffraction. The structure was determined in the standard space group setting C12/c1 (No. 15), rather than the commonly adopted I12/a1. AC impedance spectroscopy found CeNbO{sub 4} single crystals showed lower conductivity compared to CeNbO{sub 4+δ} confirming interstitial oxygen can penetrate through fergusonite and is responsible for the higher conductivity associated with these oxides. Highlights: • Preparation of single crystals of CeNbO{sub 4} using a floating zone mirror furnace. • Correction to the crystal symmetry of the monoclinic form of CeNbO{sub 4}. • Report the conductivity of a single crystal of CeNbO{sub 4}.

36 MATERIALS SCIENCE↗

Characterization of hot-pressed von Alpen type NASICON ceramic electrolytes

The Na-ion conducting solid electrolyte NASICON is a promising solid state electrolyte (SSE) for use in Na based electrochemical systems. The effects of particle morphology and synthesis of von Alpen type NASICON via hot-pressing were investigated. Spray dried particles were shown to improve mechanical and electrochemical properties. X-ray diffraction, scanning electron microscopy, impulse excitation measurements, Vickers hardness, and impedance spectroscopy were used to correlate relationships between phase purity, microstructure, mechanical properties, and electrochemical properties. Scanning electron microscopy showed the presence of a glass phase as between 19.08% and 28.23% area percentage and a ZrO 2 phase between 0.46% and 3.51% area percentage in the hot-pressed samples. Impulse excitation showed elastic modulus varying from 83.65 to 97.65 GPa. The first values of Poisson's ratio and shear modulus of NASICON are reported as between 0.23 and 0.26 and 33.87 to 38.79 GPa, respectively. Vickers hardness and fracture toughness measurements showed Vickers hardness ranging from 4.30 to 4.68 GPa and fracture toughness ranging from 1.05 to 1.09 MPa m ½ . Impedance spectroscopy showed grain conductivities ranging from 1.023 to 1.287 mS/cm, with grain boundary resistance percentages between 73.22 and 47.5%. Total conductivities ranged from 0.292 to 0.596 mS/cm, with 0.596 mS/cm being achieved at room temperature for the spray dried powders with lower grain boundary resistance percentages.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Obtaining Mixed Ionic/Electronic Conductivity in Perovskite Oxides in a Reducing Environment: A Computational Prediction for Doped SrTiO3

The electronic conductivity and thermodynamic stability of mixed p- and n-doped SrTiO3 perovskites have been investigated under anodic solid oxide fuel cell conditions using density functional theory (DFT). In particular, constrained ab initio thermodynamic calculations have been performed to evaluate the phase stability of various Ga- and La-doped SrTiO3 at synthesized and anodic SOFC conditions. The density of states (DOS) of these materials was analyzed to determine the number of charge carriers and the degree of electronic conductivity. We find that a mixed ionic/electronic conductor can be obtained when doping SrTiO3 perovskite oxide with both p-type and n-type dopants. Calculations show that 10% Ga- and 20% La-doped SrTiO3 exhibit mixed ionic/electronic conductivity at high temperature and low oxygen partial pressure whereas doping with higher concentrations of Ga, e.g., 20%, diminishes the electronic conductivity of the material. Furthermore, changing the n-dopant from La (A-site) to Nb (B-site) does not significantly affect the reducibility and number of charge carriers in p- and n-doped SrTiO3. However, a higher degree of oxygen vacancy clustering is observed for the La-doped material which reduces the oxygen ion diffusion rate and traps electrons. Nevertheless, our findings suggest that independent of doping site, mixed ionic/ electronic conductivity can be obtained in SrTiO3 perovskite oxides under reducing conditions and high temperatures when using a mixed p- and n-type doping strategy that uses a p-dopant concentration smaller than the n-dopant concentration.

Environmental Molecular Sciences Laboratory↗