Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HALIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Phase Segregation and Sequential Expulsion of Iodide and Bromide in Photoirradiated Ruddlesden–Popper 2D Perovskite Films

Two-dimensional (2D) Ruddlesden–Popper mixed-halide perovskite films, BA 2 PbBr 2 I 2 , undergo phase segregation when excited with visible light to generate bromide- and iodide-rich regions, as marked by absorption and emission changes. Upon stopping illumination, the process reverses, allowing original film compositions to be restored. However, if films are in contact with dichloromethane, light irradiation causes the sequential expulsion of iodide and bromide and introduces irreversible changes to the 2D films. The sequential disappearance of I– and Br– from pristine films (BA 2 Pb 2 Br 4 and BA 2 Pb 2 I 4 ) under photoirradiation, as observed from variances in expulsion rates, reflects differences in halide ion mobilities in these films. The photoinstability of 2D films raises questions about their use in stabilizing bulk, three-dimensional (3D) perovskite solar cells through 3D/2D interfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Fluorine-Substituted Lithium Chloride Solid Electrolytes for High-Voltage All-Solid-State Lithium-Ion Batteries

Lithium ternary halides are promising solid electrolytes, owing to their high ionic conductivity and reasonably high oxidative and chemical stability. Recently, fluorine substitution in Li 3 MCl 6 has been suggested as a promising approach for further enhancing oxidation stability. Accordingly, this study outlines a material design strategy for F-substituted Li 3 MCl 6 through systematic theoretical analyses. Calculations reveal that the mixing limit of F in Li 3 MCl 6–x F x is in the range of 0.5–1.5, and the resulting Li 3 MCl 6–x F x phases can retain ionic conductivity above 1 mS/cm up to x = 1.0. Additionally, the calculations also predict that the formation of F-containing passivating phases could increase the oxidation potential for Li3MCl5F to ~6.3 V. The proposed material design strategy is validated through the synthesis of Li 3 YCl 5 F, which is confirmed to show both high ionic conductivity and enhanced oxidation stability. The design guidelines presented herein can accelerate the potential use of halide-based electrolyte chemistries in high-voltage all-solid-state batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

Local A-Site Phase Segregation Leads to Cs-Rich Regions Showing Accelerated Photodegradation in Mixed-Cation Perovskite Semiconductor Films

We use hyperspectral photoluminescence microscopy to study compositional heterogeneity and its influence on the stability of mixed-cation (formamindinium (FA) and cesium) FA 1-x Cs x Pb(I 0.9 Br 0.1 ) 3 lead halide perovskites with different Cs contents. We observe substantial microscale heterogeneity in the photoluminescence. By correlating photoluminescence maps with time-of-flight secondary ion mass spectrometry (ToF-SIMS) imaging, we show that the redder-photoluminescence regions of the perovskite film are associated with Cs-rich compositions. X-ray diffraction measurement and confocal Raman spectroscopy provide evidence for the presence of d-phase CsPbI x Br 3-x in these regions. Photo-aging tests show that these Cs-rich clusters undergo faster photoluminescence decay than the rest of the film. These observations highlight the importance of local heterogeneities and their influence on the stability of halide perovskite semiconductors being studied for optoelectronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Microscopic Mechanisms of Superionic Na-ion Conductivity in Crystalline and Amorphous NaMOCl 4 (M = Nb, Ta) Solid Electrolytes

Sodium-ion solid electrolytes offer a sustainable route toward next-generation batteries, but few match the performance of their lithium counterparts. Halide-based NaMOCl 4 (M = Nb, Ta) has recently emerged as a promising analogue to LiMOCl 4 , yet its structure–transport relationships remain unclear due to poor crystallinity in experiments. Here, we combine density functional theory and machine-learned molecular dynamics to reveal that crystalline NaMOCl 4 exhibits negligible room-temperature conductivity with high activation barriers arising from vacancy-mediated diffusion below an order–disorder transition. Above this transition, rotational and translational motion of the [MO 2/2 Cl 4 – ] ∞ chains create new Na sites and enhances transport. In contrast, the amorphous phase inherently supports facile, three-dimensional Na diffusion through dynamic framework flexibility. These results show that ordered crystalline phases hinder ionic transport, while disorder – either thermally induced or structural – facilitates it, revising prior assumptions from the Li system and providing design principles for high-conductivity Na halide electrolytes.

Wei, Grace [University of California, Berkeley, CA↗
DOE OSTI2016

Defect Tolerance in Methylammonium Lead Triiodide Perovskite

Photovoltaic applications of perovskite semiconductor material systems have generated considerable interest in part because of predictions that primary defect energy levels reside outside the bandgap. We present experimental evidence that this enabling material property is present in the halide-lead perovskite, CH3NH3PbI3 (MAPbI3), consistent with theoretical predictions. By performing X-ray photoemission spectroscopy, we induce and track dynamic chemical and electronic transformations in the perovskite. These data show compositional changes that begin immediately with exposure to X-ray irradiation, whereas the predominant electronic structure of the thin film on compact TiO2 appears tolerant to the formation of compensating defect pairs of VI and VMA and for a large range of I/Pb ratios. Changing film composition is correlated with a shift of the valence-band maximum only as the halide-lead ratio drops below 2.5. This delay is attributed to the invariance of MAPbI3 electronic structure to distributed defects that can significantly transform the electronic density of states only when in high concentrations.

14 SOLAR ENERGY↗
DOE OSTI2017

Band Tailing and Deep Defect States in CH 3 NH 3 Pb(I 1–x Br x ) 3 Perovskites As Revealed by Sub-Bandgap Photocurrent

Organometal halide perovskite semiconductors have emerged as promising candidates for optoelectronic applications because of the outstanding charge carrier transport properties, achieved with low-temperature synthesis. In this paper, we present highly sensitive sub-bandgap external quantum efficiency (EQE) measurements of Au/spiro-OMeTAD/CH 3 NH 3 Pb(I 1–x Br x ) 3 /TiO 2 /FTO/glass photovoltaic devices. The room-temperature spectra show exponential band tails with a sharp onset characterized by low Urbach energies (E u ) over the full halide composition space. The Urbach energies are 15–23 meV, lower than those for most semiconductors with similar bandgaps (especially with E g > 1.9 eV). Intentional aging of CH 3 NH 3 Pb(I 1–x Br x ) 3 for up to 2300 h, reveals no change in E u , despite the appearance of the PbI 2 phase due to decomposition, and confirms a high degree of crystal ordering. Moreover, sub-bandgap EQE measurements reveal an extended band of sub-bandgap electronic states that can be fit with one or two point defects for pure CH 3 NH 3 PbI 3 or mixed CH 3 NH 3 Pb(I 1–x Br x ) 3 compositions, respectively. Finally, the study provides experimental evidence of defect states close to the midgap that could impact photocarrier recombination and energy conversion efficiency in higher bandgap CH 3 NH 3 Pb(I 1–x Br x ) 3 alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Performance Enhancement of Lead-Free Tin-Based Perovskite Solar Cells with Reducing Atmosphere-Assisted Dispersible Additive

Sn-based halide perovskite materials have attracted tremendous attention and have been employed successfully in solar cells. However, their high conductivities resulting from the unstable divalent Sn state in the structure cause poor device performance and poor reproducibility. Herein, we used excess tin iodide (SnI 2 ) in Sn-based halide perovskite solar cells (ASnI 3 , A = Cs, methylammonium and formamidinium tin iodide as the representative light absorbers), combined with a reducing atmosphere to stabilize the Sn 2+ state. Excess SnI 2 can disperse uniformly into the perovskite films and functions as a compensator as well as a suppressor of Sn 2+ vacancies thereby effectively reducing the p-type conductivity. This process significantly improved the solar-cell performances of all the ASnI3 materials on mesoporous TiO 2 . Optimized CsSnI3 devices achieved a maximum power conversion efficiency of 4.81%, which is the highest among all inorganic Pb-free perovskite solar cells to date.

14 SOLAR ENERGY↗
DOE OSTI2018

Density of States Broadening in CH 3 NH 3 PbI 3 Hybrid Perovskites Understood from ab Initio Molecular Dynamics Simulations

Lead-halide perovskites are promising materials in optoelectronic devices for their unique properties including direct band gap, strong light absorption, high carrier mobility, and low fabrication cost. Here, by using ab inito molecular dynamics and electronic structure calculations, we report a systematic study on the broadening density of states (DOS) deep in the valence bands that has been experimentally observed but absent in static calculations. We quantify the broadening DOS reduction from the cubic phase to lower-temperature tetragonal and orthorhombic phases and attribute observed effects to the molecular vibrations and the anharmonicity of iodine atoms motion. Specifically, the MA cations’ vibrations are strongly linked to the moderate C–N stretch and CH 3 bend, as well as the strong CH 3 and NH 3 + stretches. Furthermore, these results present a theoretical perspective on the structural dynamics in lead-halide perovskites which may be valuable for future studies toward desired functionalities in perovskite-based optoelectronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2018

A One-Dimensional Organic Lead Chloride Hybrid with Excitation-Dependent Broadband Emissions

Organic–inorganic metal halide hybrids have emerged as a new class of materials with fascinating optical and electronic properties. The exceptional structure tunability has enabled the development of materials with various dimensionalities at the molecular level, from three-dimensional (3D) to 2D, 1D, and 0D. Here, we report a new 1D lead chloride hybrid, C 4 N 2 H 14 PbCl 4 , which exhibits unusual inverse excitation-dependent broadband emission from bluish-green to yellow. Density functional theory calculations were performed to better understand the mechanism of this excitation-dependent broadband emission. This 1D hybrid material is found to have two emission centers, corresponding to the self-trapped excitons (STEs) and vacancy-bound excitons. The excitation-dependent emission is due to different populations of these two types of excitons generated at different excitation wavelengths. Furthermore, this work shows the rich chemistry and physics of organic–inorganic metal halide hybrids and paves the way to achieving novel light emitters with excitation-dependent broadband emissions at room temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2023

High Layer Number ( n = 1–6) 2D Ruddlesden–Popper Lead Bromide Perovskites: Nanosheets, Crystal Structure, and Optoelectronic Properties

2D Ruddlesden–Popper (RP) lead halide perovskites have highly tunable structures, compositions, and properties that enable their promising optoelectronic applications. Among various 2D halide perovskites, the materials chemistry and fundamental optoelectronic properties of high layer number (n) lead-bromide RP perovskites, where n refers to the number of inorganic octahedra layers, have been less studied. Here, we report the synthesis of thin nanosheets of (PEA) 2 Cs n–1 Pb n Br 3n+1 (n = 1–6, PEA = phenylethylammonium) perovskites and study the optical properties, assigning photoluminescence emissions of 486, 496, and 505 nm to n = 4–6 phases, respectively, and reporting the photoluminescence lifetimes. Furthermore, the crystal structure of (PEA) 2 Cs 2 Pb 3 Br 10 was determined to reveal minimal octahedral structural distortions. Ultraviolet photoelectron spectroscopy measurements reveal the positioning of the valence and conduction bands for n = 1–3 phases and confirm the type-I band alignment for the (PEA) 2 Cs n–1 Pb n Br 3n+1 series, laying the foundation for rational heterostructure device design in the future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Nanoscale Strain and Octahedral Tilting Removes Structural and Nonradiative Defects in 2D-Templated FAPbI 3

The halide perovskite formamidinium lead iodide (FAPbI 3 ) is a prime candidate for photovoltaics due to its excellent optoelectronic properties, but its application has been limited due to its structural instability. The large size of the FA cation results in metastability of the photoactive cubic phase and a facile degradation into thermodynamically stable hexagonal phases at room temperature. Recently, the incorporation of two-dimensional (2D) Ruddlesden-Popper halide perovskite seeds into a FAPbI 3 precursor solution was shown to template the growth of and stabilize cubic FAPbI 3 . Here, in this study, we investigate the nanoscale structural and optoelectronic mechanisms behind the observed bulk stabilization using synchrotron-based X-ray microscopies. Nanoprobe X-ray diffraction reveals 2D-templated FAPbI 3 films exhibit an average compressive strain normal to the substrate of -3.3%, 2-fold larger than that of MACl-stabilized FAPbI 3 . This compression creates locally templated regions composed of tetragonal-phase FAPbI 3 distributed nonuniformly throughout the film with fewer crystalline defects than purely cubic regions. Scanning X-ray excited optical luminescence (X-ray analog of photoluminescence) reveals that this local templating results in increased radiative recombination and red-shifted band edge and emission. Our results provide insight into the microscopic mechanism for the phase stabilization of FAPbI 3 using 2D perovskites as templates.

X-ray diffraction↗
DOE OSTI2025

Phosphate-Based Approaches for Dechlorination and Treatment of Salt Waste from Electrochemical Processing of Used Nuclear Fuel: A Perspective on Recent Work

Phosphate-based reagents are being considered by the U.S. Department of Energy (DOE) Office of Nuclear Energy to process halide salt-based nuclear wastes for stabilization prior to disposal. As evidenced by the Experimental Breeder Reactor-II (EBR-II) project, electrochemical processing (pyroprocessing) can be employed to recover uranium and other actinides for reintegration into the nuclear fuel cycle from metallic fuels. The resultant salt-based wastes generated from electrochemical processing of EBR-II fuel contains fission products within a LiCl–KCl eutectic salt that necessitate appropriate disposal. This paper provides an overview of recent efforts to support halide-based salt waste treatment for disposition, as well as a basis for comparison with other related efforts in salt waste treatment through salt partitioning initiatives. The U.S. DOE has selected a phosphate waste form reference material for further investigation and longer-term studies.

electrorefiner↗
DOE OSTI2020

Highly Distorted Chiral Two-Dimensional Tin Iodide Perovskites for Spin Polarized Charge Transport

Incorporating chiral organic molecules into organic/inorganic hybrid 2D-layered metal-halide perovskites results in a novel family of chiral hybrid semiconductors with unique spin-dependent properties. The embedded chiral organic moieties induce a chiroptical response from the inorganic metal-halide sublattice. However, the structural interplay between the chiral organic molecules and the inorganic sublattice, as well as their synergic effect on the resulting electronic band structure need to be explored in a broader material scope. Here we present three new layered tin iodide perovskites templated by chiral ( R/S -)methylbenzylammonium ( R/S -MBA), i.e. ( R-/S -MBA) 2 SnI 4 , and their racemic phase ( rac -MBA) 2 SnI 4 . These MBA 2 SnI 4 compounds exhibit the largest level of octahedral bond distortion compared to any other reported layered tin iodide perovskite. The incorporation of chiral MBA cations leads to circularly polarized absorption from the inorganic Sn–I sublattice, displaying chiroptical activity in the 300–500 nm wavelength range. The bandgap and chiroptical activity are modulated by alloying Sn with Pb, in the series of (MBA) 2 Pb 1-x Sn x I 4 . Finally, we show that vertical charge transport through oriented ( R-/S -MBA) 2 SnI 4 thin films is highly spin-dependent, arising from a chiral-induced spin selectivity (CISS) effect. We demonstrate a spin-polarization in the current-voltage characteristics as high as 94%. Our work shows the tremendous potential of these chiral hybrid semiconductors for controlling both spin and charge degrees of freedom.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Controlled Single-Electron Transfer via Metal–Ligand Cooperativity Drives Divergent Nickel-Electrocatalyzed Radical Pathways

Electrocatalysis enables the construction of C-C bonds under mild conditions via controlled formation of carbon-centered radicals. For sequences initiated by alkyl halide reduction, coordinatively unsaturated Ni complexes commonly serve as single-electron transfer agents, giving rise to the foundational question of whether outer- or inner-sphere electron transfer oxidative addition prevails in redox mediation. Indeed, rational design of electrochemical processes requires the discrimination of these two electron transfer pathways, as they can have outsized effects on the rate of substrate bond activation and thus impact radical generation rates and downstream product selectivities. We present results from combined synthetic, electroanalytical, and computational studies that examine the mechanistic differences of single electron transfer to alkyl halides imparted by Ni metal-ligand cooperativity. Electrogenerated reduced Ni species, stabilized by delocalized spin density onto a redox-active tpyPY2Me polypyridyl ligand, activates alkyl iodides via outer-sphere electron transfer, allowing for the selective activation of alkyl iodide substrates over halogen atom donors and the controlled generation and sequestration of electrogenerated radicals. In contrast, the Ni complex possessing a redox-innocent pentapyridine congener activates the substrates in an inner-sphere fashion owning to a purely metal-localized spin, thereby activating both substrates and halogen atom donors in an indiscriminate fashion, generating a high concentration of radicals and leading to unproductive dimerization. Overall, our data establish that controlled electron transfer via Ni-ligand cooperativity can be used to limit undesired radical recombination products and promote selective radical processes in electrochemical environments, providing a generalizable framework for designing redox mediators with distinct rate and potential requirements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A Unified Approach to Decarboxylative Halogenation of (Hetero)aryl Carboxylic Acids

Aryl halides are a fundamental motif in synthetic chemistry, playing a critical role in metal-mediated cross-coupling reactions and serving as important scaffolds in drug discovery. Although thermal decarboxylative functionalization of aryl carboxylic acids has been extensively explored, the scope of existing halodecarboxylation methods remains limited, and there currently exists no unified strategy that provides access to any type of aryl halide from an aryl carboxylic acid precursor. Herein, we report a general catalytic method for direct decarboxylative halogenation of (hetero)aryl carboxylic acids via ligand-to-metal charge transfer. This strategy accommodates an exceptionally broad scope of substrates. Here, we leverage an aryl radical intermediate toward divergent functionalization pathways: (1) atom transfer to access bromo- or iodo(hetero)arenes or (2) radical capture by copper and subsequent reductive elimination to generate chloro- or fluoro(hetero)arenes. The proposed ligand-to-metal charge transfer mechanism is supported through an array of spectroscopic studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Quasi-One-Dimensional Metallicity in Compressed CsSnI 3

Low-dimensional metal halides exhibit strong structural and electronic anisotropies, making them candidates for accessing unusual electronic properties. Here, in this work, we demonstrate pressure-induced quasi-one-dimensional (quasi-1D) metallicity in δ-CsSnI 3 . With the application of pressure up to 40 GPa, the initially insulating δ-CsSnI 3 transforms to a metallic state. Synchrotron X-ray diffraction and Raman spectroscopy indicate that the starting 1D chain structure of edge-sharing Sn–I octahedra in δ-CsSnI 3 is maintained in the high-pressure metallic phase while the SnI 6 octahedral chains are distorted. Our experiments combined with first-principles density functional theory calculations reveal that pressure induces Sn–Sn hybridization and enhances Sn–I coupling within the chain, leading to band gap closure and formation of conductive SnI 6 distorted octahedral chains. In contrast, the interchain I...I interactions remain minimal, resulting in a highly anisotropic electronic structure and quasi-1D metallicity. Our study offers a high-pressure approach for achieving diverse electronic platforms in the broad family of low-dimensional metal halides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Cyclic versus Linear Alkylammonium Cations: Preventing Phase Transitions at Operational Temperatures in 2D Perovskites

Two-dimensional lead halide perovskites offer numerous attractive features for optoelectronics owing to their soft, deformable lattices and high degree of chemical tunability. While alteration of the metal and halide ions gives rise to significant modification of the bandgap energy, the organic spacer cations offer in-roads to tuning phase behavior and more subtle functionalities in ways that remain to be understood. Here, we study six variations of 2D perovskites changing only the organic spacer cations and demonstrate that these components intrinsically impact material response in important ways such as altering crystallographic structure, temperature-induced phase transitions, and photoluminescence emission. Two-dimensional perovskites containing commonly utilized aliphatic linear spacers, such as butylammonium, undergo phase transitions near room temperature. These transitions and temperature changes induce spacer-dependent variations in the emission spectra. Conversely, 2D perovskites comprising cyclic aliphatic spacers, such as cyclobutylammonium, are found to lack first-order phase transitions. These cyclic molecules are more sterically hindered within the crystal lattice, leading to temperature-induced contraction or expansion along certain crystallographic planes but no other significant thermal effects; additionally, they undergo changes in their emission spectra that cannot be explained by simple thermal expansion. Finally, given the similarities in the dielectric and chemical makeup of this set of six alkylammonium molecules, these results are unexpected and suggest a large structural and thermal phase space via spacer manipulation that could lead to improved 2D perovskite functionalization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗