Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Graphite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Intern Poster

Digital Image Correlation (DIC) is an optical technique that combines image registration and tracking methods for accurate two-dimensional and three-dimensional changes in images. DIC software can be used to track the contour, deformation, and strain of a sample. In the Advanced Test Reactor (ATR) at INL (Idaho National Laboratory) there exists a small working window of samples that can become irradiated. Hundreds of graphite disks called piggybacks have undergone this irradiation as part of the Advanced Reactor Technologies (ART) program. After irradiation, it is desirable to understand the change in tensile strength as a function of dose. Due to the limited space in the ATR, typical dog bone tensile tests reduce the number of graphite samples from hundreds to tens. However, there does exist an ASTM standard, D8289, which uses disc compression of graphite to estimate the tensile strength of the specimen with the Brazilian Disk test fixture. While only used as an estimate, which is typically off by a third, it is the purpose of this study to identify how to amend D8289 to remove the word "estimate" with the help of DIC.

36 MATERIALS SCIENCE↗

Enabling 6C Fast Charging of Li–Ion Batteries with Graphite/Hard Carbon Hybrid Anodes

Li-ion batteries that can simultaneously achieve high-energy density and fast charging are essential for electric vehicles. Graphite anodes enable a high-energy density, but suffer from an inhomogeneous reaction current and irreversible Li plating during fast charging. In contrast, hard carbon exhibits superior rate performance but lower energy density owing to its lower initial coulombic efficiency and higher average voltage. In this work, these tradeoffs are overcome by fabricating hybrid anodes with uniform mixtures of graphite and hard carbon, using industrially-relevant multi-layer pouch cells (>1 Ah) and electrode loadings (3 mAh cm –2 ). By controlling the graphite/hard carbon ratio, this study shows that battery performance can be systematically tuned to achieve both high-energy density and efficient fast charging. Pouch cells with optimized hybrid anodes retain 87% and 82% of their initial specific energy after 500 cycles of 4C and 6C fast-charge cycling, respectively. This is significantly higher than the 61% and 48% specific energy retention with graphite anodes under the same conditions. The enhanced performance is attributed to improved homogeneity of the reaction current throughout the hybrid anode, which is supported by continuum-scale modeling. Furthermore, this process is directly compatible with existing roll-to-roll battery manufacturing, representing a scalable pathway to fast charging.

25 ENERGY STORAGE↗

Development of Technological Equipment for RBMK Service-Life Extension

This article is devoted to the solution of the now urgent problem of the aging of the RBMK-1000 graphite stack (bending of the graphite columns as a result of cracking of the graphite blocks under the action of temperature and exposure to radiation). The successful work performed by a group of specialists from the Diakont Company Group on restoring the service-life characteristics of the first two power-generating units at the Leningradskaya NPP is considered as an example. Laying bare the crux of the main stages and particulars of the technological process, considerable attention is given to the principle of operation, technical possibilities, and rigging of unique equipment produced by the Diakont. The development of a complete rigging complex for restoring the service-life characteristics of the reactor plant is given together with a detailed description of the operating principles of each type of equipment.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Mechanism of Ball Milling Effect on Carbothermic Reduction of Industrial Magnesia by Coke

Mechanical milling always improves the chemical reaction rate in the metallurgy process. The experiment proved that ball milling treatment on raw materials, including industrial magnesia, metallurgical coke, and fluoride calcium, could increase greatly the reaction rate of magnesia. The reaction samples and residues were analyzed by particle size measurement, X-ray diffraction (XRD) analysis, Raman spectroscopy analysis, scanning electron microscope (SEM), and transmission electron microscope (TEM). The results suggested that the positive effect of ball milling on the reaction rate came from three aspects. Ball milling could decrease magnesia particle size and peel coke into graphite sheets to enlarge their contact surface. Meanwhile, ball milling could slightly destroy the crystal grain surface of magnesia and decrease the crystallization of graphite. The nanometer-scale magnesia particles and graphite sheets would stably and strongly attract together after a longer time ball milling. The possible evolution of the particles during ball milling was given, which explained the mechanism of the ball milling effect on the carbothermic reduction of industrial magnesia by coke.

36 MATERIALS SCIENCE↗

Measurement of Sn and In Solidification Undercooling and Lattice Expansion Using in situ x-ray diffraction

Undercooling of low melting point metals, Sn and In, on graphite, Cu, and Au-coated Cu surfaces is examined using an in-situ x-ray diffraction technique. Undercoolings of up to 56.1 C were observed for Sn solidified on graphite, which is a non-wetting substrate, while lower undercoolings were observed for Sn of 17.3 C on Au/Ni/Cu and 10.5 C on Cu surfaces. Indium behaved quite differently, showing undercoolings of less than 4 C on all three substrates. In addition, lattice expansion/contraction behavior of Sn, In and intermetallic compounds (IMCs) that formed during the reaction of Sn with the Au/Ni/Cu surface were measured. Results showed anisotropic and non-linear expansion of both Sn and In, with a contraction, rather than expansion, of the basal planes of In during heating. The principal IMC that formed between Sn and the Au/Ni/Cu surface was characterized as CuSn and had an average expansion coefficient of 13.6x10-6/ C, which is less than that of Sn or Cu.

36 MATERIALS SCIENCE↗

Effects of transition metals on the evolution of polymer-derived SiOC ceramics

This work focuses on catalytic graphitization from different metals, iron (Fe), cobalt (Co), and nickel (Ni), for inducing carbon growth in silicon oxycarbides (SiOCs) during the pyrolysis. Fe, Co, and Ni-modified SiOCs were synthesized by pyrolysis to 900, 1100, and 1300 °C respectively in Ar. The transition metals induced the formation of the corresponding metal silicides, β-SiC, and graphitic carbon with the catalytic activity in the order of Fe > Co > Ni, in agreement with the activation energy calculation based on the carbon types and amounts. Lateral growth of turbostratic carbon followed a 2D grain growth process and its point-like defect density decreased based on the catalytic order of the transition metals, with SiOC/Fe having the lowest defect density. Quantitative analysis of the XPS results with Rietveld refinement illustrated that the phase separation of SiOC is more dominant than local carbothermal reduction between SiO 2 and C in the SiOC/M (M = Ni, Co, or Fe) systems. Understanding the catalytic graphitization effect of Ni, Co, and Fe on polymer derived ceramics offers new strategies in increasing high-temperature phase amounts and thus creating novel materials for heterogeneous catalysis, magnetic, and other applications.

36 MATERIALS SCIENCE↗

On crucible effects during the growth of cadmium zinc telluride in an electrodynamic gradient freeze furnace

The CrysMAS code of the Crystal Growth Laboratory, Fraunhofer IISB, is applied to reveal conditions occurring in electrodynamic gradient freeze furnaces during the growth of cadmium zinc telluride crystals. Of particular interest are heat transfer and growth conditions associated with crucibles of different design, one constructed of graphite and the other of pyrolytic boron nitride (PBN). Under identical furnace set-point schedules, the PBN system exhibits very different heat transfer through the cone region of the crucible, resulting in steeper axial thermal profiles and convex solid-interface shapes (rather than the concave shapes computed for the graphite crucible). Both systems exhibit a concave interface during growth through the cylindrical part of the crucible; however, the axial thermal profile through the contents of the graphite crucible is considerably more offset from the set-point profile of the furnace due to the large axial flows of heat through the crucible walls. These conditions argue for advantage to the PBN system; however, comparatively larger radial gradients in the PBN system could lead to higher dislocation levels.

36 MATERIALS SCIENCE↗

In situ synthesis and characterization of uranium carbide using high temperature neutron diffraction

Advances in neutron flux, neutron instrumentation, and sample environments over the past years allowed the development of unique techniques to characterize material synthesis and processing. The available infrastructure at LANL allows to apply these techniques to radioactive materials or materials containing actinides. Here, we present capabilities and results to characterize materials in situ at temperatures above 2000 Celsius degrees such as in loss-of-coolant accidents. Temperatures in excess of 2000 C. degrees are not readily achieved and neutrons are one of a few probes to characterize materials under these conditions. Research in refractory materials, phase diagram studies or accident scenarios for nuclear materials are research areas where such extreme conditions are required. As an example, we present the formation of UC{sub x} from UO{sub 2+x} and graphite in situ using high temperature neutron diffraction with particular focus on resolving the conflicting reports on the crystal structure of non-quenchable cubic UC{sub 2}. The ability to follow the reaction UO{sub 2}+C → UC{sub x}+CO{sub y} in situ with neutron diffraction allows us to conclude that the reaction occurs within minutes over a temperature range of 60 Celsius degrees. The initiation of the reaction is far below the reaction temperature of 2000 C. degrees reported for this reaction in standard text books on actinide chemistry. This may be due to the unusually small ∼100 nm grain size of our UO{sub 2} initial powder. Furthermore, the holding time of several hours reported in the literature would be unnecessary. The neutron diffraction data collected for the cubic high temperature UC{sub 2} phase unambiguously confirmed the disordered C-C dumbbells and excluded structures previously determined by X-ray diffraction.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Pre-Oxidized and Nitrided Stainless Steel Foil for Proton Exchange Membrane Fuel Cell Bipolar Plates: Part 2- Single-Cell Fuel Cell Evaluation of Stamped Plates

Thermal (gas) nitridation of stainless steel alloys can yield low interfacial contact resistance (ICR), electrically conductive and corrosion-resistant nitride containing surface layers (Cr{sub 2}N, CrN, TiN, V{sub 2}N, VN, etc.) of interest for fuel cells, batteries, and sensors. This paper presents results of proton exchange membrane (PEM) single-cell fuel cell studies of stamped and pre-oxidized/nitrided developmental Fe-20Cr-4V weight percent (wt.%) and commercial type 2205 stainless steel alloy foils. The single-cell fuel cell behavior of the stamped and pre-oxidized/nitrided material was compared to as-stamped (no surface treatment) 904L, 2205, and Fe-20Cr-4V stainless steel alloy foils and machined graphite of similar flow field design. The best fuel cell behavior among the alloys was exhibited by the pre-oxidized/nitrided Fe-20Cr-4V, which exhibited {approx}5-20% better peak power output than untreated Fe-20Cr-4V, 2205, and 904L metal stampings. Durability was assessed for pre-oxidized/nitrided Fe-20Cr-4V, 904L metal, and graphite plates by 1000+ h of cyclic single-cell fuel cell testing. All three materials showed good durability with no significant degradation in cell power output. Post-test analysis indicated no metal ion contamination of the membrane electrode assemblies (MEAs) occurred with the pre-oxidized and nitrided Fe-20Cr-4V or graphite plates, and only a minor amount of contamination with the 904L plates.

30 DIRECT ENERGY CONVERSION↗

Effect of temperature on silicon-based anodes for lithium-ion batteries

Silicon is considered a promising anode candidate to replace graphite in lithium-ion (Li-ion) batteries for electric vehicle (EV) applications, given its high capacity (approximately 10 times higher than graphite) and, consequently, the higher energy density it can provide. However, to ensure that silicon can be used in EVs, it is necessary to determine whether it can withstand the temperature changes that an EV can experience. For this purpose, we evaluate the electrochemical performance of silicon-graphite (Si-Gr) half-cells at 4 different temperatures and explore the effect of adding fluoroethylene carbonate (FEC) to the electrolyte. We observe that cells cycled without FEC are temperature-sensitive; that is, the specific capacity, cyclability, and coulombic efficiency of Si-Gr vary as a function of the temperature applied. Conversely, the presence of FEC in the cell stabilizes the electrochemical behavior of Si-Gr, diminishing its sensitivity to temperature and providing similar reversible capacity, coulombic efficiency, and cycle-life. In this manuscript, we provide an explanation of the reasons causing this phenomenon along with other side effects of temperature, as proved by several characterization techniques.

25 ENERGY STORAGE↗

Spatially-resolved lithiation dynamics from operando X-ray diffraction and electrochemical modeling of lithium-ion cells

In this study, energy dispersive X-ray diffraction is used to profile the time evolution of ordered Li x C 6 phases in solid electrodes of lithium-ion cells charged at rates between 0.2 and 4.7C (where 1C corresponds to full discharge in 1 h). The methods for quantifying lithium concentration in these phases from the acquired diffraction patterns are described. Compact expressions for time-dependent concentration gradients in the solid electrodes using orthogonal polynomial expansions are presented. Experimentally, these gradients persisted in lithiated graphite electrodes even after the cells rested at open-circuit for over 9 h. A multiphase electrochemical model of graphite intercalation captured many of the observed behaviors, including the progression of phase transitions and the persistent gradients at zero current. However, the magnitude of concentration gradients in both the oxide cathode and graphite anode is underestimated by the model, even at moderate currents.

25 ENERGY STORAGE↗

Fast charging of Li-ion cells: Effect of separator membranes and mapping of “safe lines” to avoid Li plating

An experimental method is introduced that uses microprobe Li/Cu reference electrodes to map "safe" charging regimes to avoid Li metal plating on graphite anodes at rates to 8C. With this method, a Li-ion cell closely approaches the Li plating condition but avoids descending into this regime. This "safe" approach is used to demonstrate effects of the microporous separator on Li plating in cells consisting of a layered nickel-manganese -cobalt oxide cathode and graphite anode. We argue that most of the difference in behaviors for different separators arises from time delayed Li + ion percolation through the membrane. In conclusion, our study suggests that explicitly treating kinetics of phase transitions in the lithiated graphite anode is essential for electrochemical models predicting "safe" lines for fast charging cells.

25 ENERGY STORAGE↗

Enhancement mechanism of field electron emission properties in hybrid carbon nanotubes with tree- and wing-like features

In this work, the tree-like carbon nanotubes (CNTs) with branches of different diameters and the wing-like CNTs with graphitic-sheets of different densities were synthesized by using plasma enhanced chemical vapor deposition. The nanostructures of the as-prepared hybrid carbon materials were characterized by scanning electron microscopy and transmission electron microscopy. The structural dependence of field electron emission (FEE) property was also investigated. It is found that both of the tree- and wing-like CNTs exhibit a lower turn-on field and higher emission current density than the pristine CNTs, which can be ascribed to the effects of branch size, crystal orientation, and graphitic-sheet density. - Graphical abstract: Tree-like carbon nanotubes (CNTs) with branches and the wing-like CNTs with graphitic-sheets were synthesized by using plasma enhanced chemical vapor deposition. The structural dependence of field electron emission property was also investigated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Stability and breakdown of Ca{sup 13}CO{sub 3} melt associated with formation of {sup 13}C-diamond in static high pressure experiments up to 43 GPa and 3900 K

Melting of calcium carbonate Ca{sup 13}CO{sub 3}, stability of the melt and its decomposition were studied in static high pressure experiments at pressures of 11-43 GPa and temperatures of 1600-3900 K using diamond anvil cell technique with laser heating. We observed formation of {sup 13}C-graphite (below 16 GPa) and {sup 13}C-diamond (between 16 and 43 GPa) on decomposition of the Ca{sup 13}CO{sub 3} melt at temperatures above 3400 K. At temperatures below 3400 K congruent melting of calcium carbonate was confirmed. The experimental results were applied to construction of the phase diagram of CaCO{sub 3} up to 43 GPa and 3900 K focusing at the melting curve of calcium carbonate and the decomposition phase boundary of CaCO{sub 3} melt. - Graphical abstract: Highlights: Black-Right-Pointing-Pointer Phase states of CaCO{sub 3} were studied at P=11-43 GPa and T=1600-3900 K. Black-Right-Pointing-Pointer {sup 13}C-diamond easily crystallizes in carbonate-carbon (Ca{sup 13}CO{sub 3-}{sup 13}C-graphite) melt-solutions. Black-Right-Pointing-Pointer Ca-carbonate melts congruently that was observed in experiments in DAC with laser heating. Black-Right-Pointing-Pointer Decomposition of CaCO{sub 3} melt, indicated by formation of graphite and/or diamond. Black-Right-Pointing-Pointer Decomposition of CaCO{sub 3} was observed at temperatures above 3400 K in the pressure interval studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A detailed study of the microstructure and thermal stability of typical SiC fibers

Highlights: • The cross-sectional microstructure and thermal stability of typical SiC fibers were characterized via SEM and TEM. • The SiC fiber with gradient microstructure has better properties than that with uniform microstructure. • The graphite exhibits straight planes on the fiber surface while they're turbostratic inside the fiber. Continuous SiC fibers have attracted increasing research interest for their significant application in aerospace and nuclear energy. Control of inhomogeneity and decrement of defects are crucial for improving the mechanical and high-temperature performance of SiC fibers. Thus an understanding of fine and detailed microstructural and microchemical distribution of SiC fibers is urgently needed. In the present work, the cross-sectional phase distributions, morphologies and defects of amorphous, non-stoichiometric and near-stoichiometric SiC fibers were well characterized. From surface to core, the amorphous and non-stoichiometric fibers exhibited uniform microstructures, but a gradient change along the radial direction was observed in the near-stoichiometric fiber. Nanosized SiC and turbostratic carbon (2–4 nm) were randomly distributed inside the amorphous fiber. A large amount of graphite surrounding SiC grains appears in the non-stoichiometric fiber which possess low strength and weak thermal stability. The near-stoichiometric fiber has transgranular fracturing, high strength and favorable thermal stability, and the graphite planes are turbostratic inside the fiber but straight on the surface. The results of both energy-dispersive X-ray spectrometry measurements and first-principles calculations demonstrate that Al atoms can occupy Si sites in the SiC grains. Our findings offer fine understanding for fabricating SiC fibers with superior properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

AIR INGRESS ANALYSIS: PART 2 – COMPUTATIONAL FLUID DYNAMIC MODELS

The Idaho National Laboratory (INL), under the auspices of the U.S. Department of Energy, is performing research and development that focuses on key phenomena important during potential scenarios that may occur in very high temperature reactors (VHTRs). Phenomena Identification and Ranking Studies to date have ranked an air ingress event, following on the heels of a VHTR depressurization, as important with regard to core safety. Consequently, the development of advanced air ingress-related models and verification and validation data are a very high priority. Following a loss of coolant and system depressurization incident, air will enter the core of the High Temperature Gas Cooled Reactor through the break, possibly causing oxidation of the in-the core and reflector graphite structure. Simple core and plant models indicate that, under certain circumstances, the oxidation may proceed at an elevated rate with additional heat generated from the oxidation reaction itself. Under postulated conditions of fluid flow and temperature, excessive degradation of the lower plenum graphite can lead to a loss of structural support. Excessive oxidation of core graphite can also lead to the release of fission products into the confinement, which could be detrimental to a reactor safety. Computational fluid dynamic model developed in this study will improve our understanding of this phenomenon. This paper presents two-dimensional and three-dimensional CFD results for the quantitative assessment of the air ingress phenomena. A portion of results of the density-driven stratified flow in the inlet pipe will be compared with results of the experimental results.

99 GENERAL AND MISCELLANEOUS↗

Bypass Flow Computations using a One-Twelfth Symmetric Sector For Normal Operation in a 350 MWth VHTR

Significant uncertainty exists about the effects of bypass flow in a prismatic gas-cooled very high temperature reactor (VHTR). Bypass flow is the flow in the gaps between prismatic graphite blocks in the core. The gaps are present because of variations in their construction, imperfect installation and expansion and shrinkage from thermal heating and neutron fluence. Calculations are performed using computational fluid dynamics (CFD) for flow of the helium coolant in the gap and coolant channels along with conjugate heat generation and heat transfer in the fuel compacts and graphite. A commercial CFD code is used for all of the computations. A one-twelfth sector of a standard hexagonal block column is used for the CFD model because of its symmetry. Various scenarios are computed by varying the gap width from zero to 5 mm, varying the total heat generation rate to examine average and peak radial generation rates and variation of the graphite block geometry to account for the effects of shrinkage caused by irradiation. The calculations are for a 350 MWth prismatic reactor. It is shown that the effect of increasing gap width, while maintaining the same total mass flow rate, causes increased maximum fuel temperature while providing significant cooling to the near-gap region. The maximum outlet coolant temperature variation is increased by the presence of gap flow and also by an increase in total heat generation with a gap present. The effect of block shrinkage is actually to decrease maximum fuel temperature compared to a similar reference case.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The low temperature oxidation of lithium thin films on HOPG by O 2 and H 2 O

Lithiated graphite and lithium thin films have been used in fusion devices. In this environment, lithiated graphite will undergo oxidation by background gases. In order to gain insight into this oxidation process, thin (< 15 monolayer (ML)) lithium films on highly ordered pyrolytic graphite (HOPG) were exposed in this paper to O 2(g) and H 2 O (g) in an ultra-high vacuum chamber. High resolution electron energy loss spectroscopy (HREELS) was used to identify the surface species formed during O 2(g) and H 2 O (g) exposure. Auger electron spectroscopy (AES) was used to obtain the relative oxidation rates during O 2(g) and H 2 O (g) exposure. AES showed that as the lithium film thickness decreased from 15 to 5 to 1 ML, the oxidation rate decreased for both O 2(g) and H 2 O (g) . HREELS showed that a 15 ML lithium film was fully oxidized after 9.7 L (L) of O 2(g) exposure and Li 2 O was formed. HREELS also showed that during initial exposure (< 0.5 L) H 2 O (g) , lithium hydride and lithium hydroxide were formed on the surface of a 15 ML lithium film. Finally, after 0.5 L of H 2 O (g) exposure, the H 2 O (g) began to physisorb, and after 15 L of H 2 O (g) exposure, the 15 ML lithium film was not fully oxidized.

36 MATERIALS SCIENCE↗