Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GLASS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Integral Glass Encapsulation for Solar Arrays

Progress in the development of permanent, integral glass encapsulation of terrestrial solar photovoltaic arrays by electrostatic bonding is reported. Two basic types of electrostatically bonded modules were demonstrated and their reliability proven in accelerated environmental testing. Economic analyses indicate that electrostatic bonding can be a cost effective, practical, and automatable process for large-scale production of arrays with lifetimes of more than 20 years.

Source record↗

Composite properties for S-2 glass in a room-temperature-curable epoxy matrix

The authors have measured thermal and mechanical properties of several composites of S-2 glass fiber in a room-temperature-curable epoxy matrix. The filament-wound composites ranged from 50 to 70 vol% fiber. The composites had generally good to excellent mechanical properties, particularly in view of the moderate cost of the material. However, the composites showed rapid increases in transverse thermal expansion above 50 C, and this property must be carefully considered if any use above that temperature is contemplated.

Clements, L. L.↗

Thermally stimulated conductivity studies of trapping centers in alkali-borosilicate glasses

Thermally stimulated conductivity studies have been performed on unirradiated borosilicate glasses made to contain various amounts of sodium, lithium, nickel, and iron oxides. Measurements were made between 77 and 570 K. All the samples gave one or more conductivity peaks below room temperature. Analysis of the initial-rise slope of the conductivity peaks of the various samples gave trapping-level energies ranging from 0.1 to 1.9 eV. The shape and temperature of the maximum of most of the peaks changed on each measurement cycle. A few samples exhibited a common peak that formed on annealing.

Catchings, R. M.↗

The formation kinetics of lunar glasses

The kinetic treatment of crystallization and glass formation, involving the construction of time-temperature-transformation curves (TTT) corresponding to a given degree of crystallinity, is extended to permit the description of crystallization of a body initially cooled to a glassy state. The key assumption is that if at any time and temperature a crystallite is smaller than the critical size corresponding to that temperature, it will melt completely and can be ignored in any further calculations of the crystal distribution. This approach is used to predict the temperature of maximum crystallization rate for the matrix composition of lunar breccia 67975; results are shown to be in excellent agreement with experiment. Theoretical results obtained for anorthite indicate a barrier to nucleation in the range of 75 kT when the ratio of the undercooling to the liquidus temperature is 0.2. Measured nucleation barriers for the 67975 matrix composition are in the range of 42 to 45 kT.

Uhlmann, D. R.↗

Effects of boron and glass hybrid epoxy-composites on graphite-fiber release in an aircraft fire

Recent studies have shown that the benefits gained by using graphite-epoxy composite structures may not be realized without some risk. The graphite fibers are very good electrical conductors and fibers released into the environment during a fire create a possible hazard to electrical equipment. Several graphite-epoxy hybrids were exposed to a fire and simulated explosion and their graphite fiber retention characteristics were examined. Several low melting-temperature glasses which wet and clump graphite-fibers and a glass/graphite fabric which reduced impact damage were identified as promising hybridizing components to minimize graphite fiber release.

Tompkins, S. S.↗

Safely splicing glass optical fibers

Field-repair technique fuses glass fibers in flammable environment. Apparatus consists of v-groove vacuum chucks on manipulators, high-voltage dc power supply and tungsten electrodes, microscope to observe joint alignment and fusion, means of test transmission through joint. Apparatus is enclosed in gas tight bos filled with inert gas during fusion. About 2 feet of fiber end are necessary for splicing.

Korbelak, K.↗

Arc spraying solderable tabs to glass

Tabs suitable for electrical or mechanical connections in solar cells and integrated circuits are made by spraying technique. Solder wets copper, copper bonds to aluminum, and aluminum adheres to glass. Arc spraying is automated and integrated with encapsulation, eliminating hand tabbing, improving reliability, and reducing cost.

Lindmayer, J.↗

Glass shell manufacturing in space

Residual gases always found in glass shells are CO2, O2 and N2. In those cases where high water vapor pressure is maintained in the furnace, water is also found in the shells. Other evidence for the existence of water in shells is the presence of water-induced surface weathering of the interior shell surface. Water and CO2 are the predominant volatiles generated by the pyrolysis of both inorganic and hydrolyzed metal-organic gels. The pyrolysates of unhydrolyzed metal-organic gels also contain, in addition to water and CO2, significant levels of organic volatiles, such as ethanol and some hydrocarbons; on complete oxidation, these produce CO2 and water as well. Water is most likely the initial blowing agent, it is produced copiously during the initial stages of heating. In the later stages, CO2 becomes the dominant gas as H2O is lost at increasing rates. Water in the shell arises mainly from gel dehydration, CO2 by sodium bicarbonate/carbonate decomposition and carbon oxidation, and O2 and N2 by permeation of the ambient furnace air through the molten shell wall.

Nolen, R. J.↗

Use of Glass Reinforced Concrete (GRC) as a substrate for photovoltaic modules

A substrate for flat plate photovoltaic solar panel arrays using a glass fiber reinforced concrete (GRC) material was developed. The installed cost of this GRC panel is 30% less than the cost goal of the Near Term Low-Cost Flat Plate Photovoltaic Solar Array Program. The 4 ft by 8 ft panel is fabricated from readily available inexpensive materials, weighs a nominal 190 lbs., has exceptionally good strength and durability properties (rigid and resists weathering), is amenable to mass production and is easily installed on simple mountings. Solar cells are encapsulated in ethylene/vinyl acetate with Tedlar backing and Korad cover film. The laminates are attached to the GRC substrate with acrylic transfer tape and edge sealed with silicone RTV adhesive.

Eirls, J. L.↗

Secondary electron emission from sodium chloride, glass and aluminum oxide at various temperature

The method of single impulses was used to measure the coefficients of the secondary electronic emission for 2 types of Al2O2, monocrystalline NaCl and glass at different temperatures and for different values of the energy of the primary electrons. The value of the secondary electron emission does not depend upon temperature. The effect of a gas film on the value of the secondary electron emission was detected.

Shulman, A. R.↗

Investigations of submicron sized metal particles in glass coatings of lunar breccia 15286

Almost all the submicron metal particles in the glass coating of breccia 15286 are rounded and contain two phases, metal and sulfide (FeS). The Ni content of the metal phase as determined by scanning transmission electron microscope X-ray analysis ranged from 9.4 to 15.5 wt %. The sulfide was nearly stoichiometric troilite containing up to 1.3 wt % Ni. The close chemical and microstructural similarities between the coarse (greater than 1-micron) and the submicron sized metal indicate a common origin probably as meteoritic debris. Metal-silicate melt experiments under controlled oxygen partial pressured indicate that the metal particles may have formed from a fine dispersion of immiscible metal-sulfide droplets into an impact-generated silicate melt.

Mehta, S.↗

Spectra of Fe-Ti silicate glasses - Implications to remote-sensing of planetary surfaces

Optical spectra of synthetic Fe-Ti silicate glasses and the temperature variations of the spectral features were investigated. The spectra are assigned to absorptions due to crystal field (CF) transitions in Ti(3+), Fe(2+) in octahedral coordination, and Fe(2+) in tetrahedral coordination, and to metal-metal and oxygen-metal charge transfer (CT) transitions which contribute to the near ultraviolet absorption edge. Temperature variations of the optical bands have been studied to explore implications for remote sensing. Caution is urged in the use of the absorption edge as a measure of TiO2 concentrations on planetary surfaces and in regolith samples.

Nolet, D. A.↗

Trace elements in ocean ridge basalt glasses - Implications for fractionations during mantle evolution and petrogenesis

Seven documented and fresh glassy selvages from ocean floor basalt pillows were analyzed for trace elements including Ag, Au, Bi, Br, Ni, Pd, and Zn using radiochemical activation analysis. Glasses from DSDP leg 24, site 238 in the Indian Ocean have a trace element pattern which reflects secondary processes at a shallow depth. Chemical fractionations in petrogenesis of tholeiitic basalts indicate that (Ir, Os), Au, Pd, Ni, and Re are strongly fractionated in igneous processes; the unfractionated chondritic mantle pattern thus imposes constraints on mantle evolution models. Finally, the limited Rb/Cs fractionation in oceanic tholeiites reflects the low abundance of volatiles and hydrous silicates in normal ocean ridge basalts.

Hertogen, J.↗

Development of glass encapsulation techniques for terrestrial photovoltaic arrays

Two parallel development programs for terrestrial solar cell module encapsulation and fabrication are reviewed, including the status of electrostatic bonding as an encapsulation technique. Current designs of electrostatically bonded modules are discussed, fabrication of which is now routine. The design of a high-efficiency module is presented, for which performance reliability features are discussed. This design is compatible with later generation changes such as the introduction of encapsulation by electrostatic bonding. Application of wire mesh contacts by electrostatic bonding has resulted in I-V curve fill factors of 0.74. Cell designs that would allow existing Pyrex glass to be used in electrostatically bonded modules are presented.

Younger, P. R.↗

Genesis of recent silicic magmatism in the Medicine Lake Highland, California - Evidence from cognate inclusions found at Little Glass Mountain

Sparse, granular inclusions of early-formed minerals found within the Little Glass Mountain rhyolite flows in northern California are shown to provide a means of characterizing the physical conditions, at depth, beneath the Medicine Lake Highland during the latest phase of volcanic activity. Mineral compositions, in combination with thermodynamic calculations and experiments, suggest crystalization at a pressure of 5,200 bars within a 966-836 C temperature range; implying that mineral segregation and equilibration occurred at a depth of 15-18 km beneath the surface. In addition, mass balance calculations indicate that the Medicine Lake flow is a close approximation to the parental magma for the latest silicic lavas.

Mertzman, S. A.↗

A preliminary analysis of the data from experiment 77-13 and final report on glass fining experiments in zero gravity

Thermal fining, thermal migration of bubbles under reduced gravity conditions, and data to verify current theoretical models of bubble location and temperatures as a function of time are discussed. A sample, sodium borate glass, was tested during 5 to 6 minutes of zero gravity during rocket flight. The test cell contained a heater strip; thermocouples were in the sample. At present quantitative data are insufficient to confirm results of theoretical calculations.

Wilcox, W. R.↗

Dynamic fatigue of a machinable glass-ceramic

To assess the stress corrosion susceptibility of a machinable glass-ceramic, its dynamic fatigue behavior was investigated by measuring its strength as a function of stress rate. Fracture mechanics techniques were used to analyse the results for the purpose of making lifetime predictions for components of this material. This material was concluded to have only moderate resistance to stress in ambient conditions. The effects of specimen size on strength were assessed for the material used in this study: it was concluded that the Weibull edge-flaw scaling law adequately describes the observed strength-size relationship.

Smyth, K. K.↗