Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ENCAPSULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Tuning bandgap and energy stability of Organic-Inorganic halide perovskites through surface engineering

Organohalide perovskite with a variety of surface structures and morphologies have shown promising potential owing to the choice of the type of heterostructure dependent stability. We systematically investigate and discuss the impact of 2-dimensional molybdenum-disulphide (MoS 2 ), molybdenum-diselenide (MoSe 2 ), tungsten-disulphide (WS 2 ), tungsten-diselenide (WSe 2 ), boron-nitiride (BN) and graphene monolayers on bandgap and energy stability of organic–inorganic halide perovskites. We found that MAPbI 3 deposited on BN-ML shows room temperature stability (-25 meV ~ 300 K) with an optimal bandgap of ~ 1.68 eV. The calculated absorption coefficient also lies in the visible-light range with a maximum of 4.9 × 10 4 cm –1 achieved at 2.8 eV photon energy. Furthermore, on the basis of our calculations, we suggest that the encapsulation of an organic–inorganic halide perovskite monolayers by semiconducting monolayers potentially provides greater flexibility for tuning the energy stability and the bandgap.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Failure of brittle micro-spherical shells embedded in elastomer matrix under indentation

Silicone elastomer filled with glass micro balloons (GMB) is an elastomeric syntactic foam used in electronics and component packaging for encapsulation, potting, stress-relief layer, and electrical insulation purposes. Under mechanical loading, the reinforcing phase, namely the GMBs embedded in the elastomer matrix, may break or delaminate, leading to internal damage and macroscale stiffness degradation, which can alter the material's protective capacity against mechanical shock and vibration. The degree of damage is controlled by the loading history, delamination, and failure behavior of the GMBs. In this work, we investigate the GMB failure behavior in this work wherein we present an indentation experiment to measure the force required to fail individual GMBs that are either embedded in the elastomer matrix or adhered to the surface of an elastomer layer. The indentation apparatus is augmented with an inverted optical microscope to enable in situ imaging of the GMB. Failure modes for the embedded or non-embedded GMBs are discussed based on the morphology of the broken GMBs and the measured failure forces. We also measure the adhesion energy between the glass balloon and the elastomer, based on which the possibility of delamination between the GMB and the surrounding elastomer matrix during the failure process is evaluated. Our results can facilitate the development of a failure criterion of GMBs which is necessary for establishing a physics-based constitutive model to describe the macroscopic damage mechanics of elastomeric syntactic foams.

42 ENGINEERING↗
DOE OSTI2024

Self-healing carbon fiber/epoxy laminates with particulate interlayers of a low-melting-point alloy

In order to prolong the service life of fiber-reinforced polymer composites, the implementation of self-healing ability with the micro-encapsulated healing agent has been extensively studied. However, such microcapsule-based self-healing composites typically suffer from degraded mechanical properties due to the liquid-phase inclusions, thereby limiting their proliferation. Here, in this study, a low-melting-point alloy is utilized as the particulate inclusions of carbon fiber/epoxy laminated composites. Field's Metal particles (melting point: 62 °C) are distributed between woven carbon fiber preforms followed by the resin impregnation to realize laminated composites with a Field's Metal-enhanced interlayer(s). The resulting laminated composites demonstrate the autonomic repair of interlaminar failure with a 40 % of healing efficiency. Most of all, the mechanical properties of these self-healing laminated composites are comparable to the conventional laminated composites attributed to the rigid inclusions that can be compressed to increase the fiber volume. Since the Field's Metal particle inclusions can bestow polymer composites with self-healing ability and the potential increase in mechanical properties, Field's Metal-enhanced fiber-reinforced polymer composites are expected to unlock the practical utility of self-healing composites.

A. polymer-matrix composites (PMCs)↗
DOE OSTI2020

Engineered bacterial microcompartments: apps for programming metabolism

Bacterial Microcompartments (BMCs) are used by diverse bacteria to compartmentalize enzymatic reactions, functioning analogously to the organelles of eukaryotes. The bounding membrane and encapsulated components are composed entirely of protein, which makes them ideal targets for modification by genetic engineering. In contrast to viruses, in which generally only one protein forms the capsid, the shells of BMCs consist of a variety of shell proteins, each a potential unit of selection. Despite their differences in permeability, the shell proteins are surprisingly interchangeable. Recent developments have shown that they are also highly amenable to engineered modifications which poise them for a variety of biotechnological applications. Additionally, given their modular structure, with a module defined as a semi-autonomous functional unit, BMCs can be considered apps for programming metabolism that can be de-bugged by adaptive evolution.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Nanoparticles caged with DNA nanostructures

Nanoparticles (NPs) offer many benefits in biotechnology because of their small size and unique properties. Furthermore, many applications require precise positioning of the NPs or biological targeting molecules on their surfaces. DNA cages constructed from DNA tile, origami, or wireframe nanostructures offer a promising path forward because of their simplicity and programmability that can be used to generate complex, dynamic 2D and 3D geometries. Such materials can be used to pattern DNA on NP surfaces and organize NPs into specific supramolecular structures. DNA-caged NPs can be implemented in biosensing and drug delivery applications with cavities precisely designed to encapsulate-specific biomolecules. Ultimately, such approaches provide a springboard for future DNA robot designs that will enable controlled interactions with biological systems.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Bacterial microcompartment architectures as biomaterials for conversion of gaseous substrates

Bacterial microcompartments (BMCs) are protein shells encapsulating multiple enzymes of a metabolic pathway. Interpretations of early experiments on carboxysomes led to the narrative that transport of small gases (CO 2 , O 2 ) across the shell membrane is restricted. Since then, this notion has been largely contradicted by studies of engineered shells, although these shell constructs lack important proteins present in the native BMCs, altering the synthetic shells’ topology, surface and mechanical properties. Here, we discuss here an updated model of gas permeability that informs the design of engineered shells for catalysis on gas substrates and outline how nonshell suprastructures of BMC shell proteins could be used in formulating sustainable biomaterials for hydrogen generation via methane pyrolysis and for other greenhouse gas mitigations.

Bacterial microcompartment↗
DOE OSTI2018

An ant-nest-like cathode substrate for lithium-sulfur batteries with practical cell fabrication parameters

We report that electrochemical performances of lithium-sulfur batteries have received much progress in recent years. However, their practical deployment encounters challenges with respect to optimizing the cell-fabrication parameters (e.g., amounts of the active material and electrolyte). We present here an “ant-nest-like” cathode substrate with unique architecture to synchronously attain high electrochemical performance and necessary cell-fabrication parameters. The cells with a high sulfur loading (11.5 mg cm -2 ), a high sulfur content (75 wt.%), and a low electrolyte/sulfur ratio (9 μL mg -1 ) display a high areal capacity and energy density of, respectively, 7 mA h cm -2 and 14 mW h cm -2 with a capacity retention of 70% after 150 cycles. Moreover, the cells exhibit a low self-discharge behavior with a low self-discharge constant of 0.0013 per day and a long rest period of one month. Lastly, these dynamic and static electrochemical stabilities are attributed to the ant-nest-like structure and low surface area of the cathode substrate that allows, respectively, the accommodation and encapsulation of a high amount of active material and reduces the consumption of electrolyte.

25 ENERGY STORAGE↗
DOE OSTI2022

Building interface bonding and shield for stable Li-rich Mn-based oxide cathode

Implementation of Li-rich Mn-based oxide cathode with high-energy-density has been restrained by capacity/voltage degradation that results from irreversible lattice oxygen loss and structure rearrangements. To resolve these challenges, in this work, Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 encapsulated by amorphous Co x B (CB-LRM) is rationally designed via autocatalytic plating for highly reversible cationic/anionic hybrid cathode material. Band coherency is ingeniously evoked by interface-reconstruction between bulk structure and amorphous coating layer, which lower the energy of O $2p$ states. Furthermore, this is associated with strengthened orbital hybridization of O $2p$-Mn $3d$ and increased formation energy of oxygen vacancy, which mitigates the lattice oxygen loss considerably. Additionally, interface shielding effects that protect electrode against electrolyte corrosion and the reduction of surface oxygen are also present with fully coverage of amorphous Co x B coating layer. As a result, the as-designed CBLRM cathode exhibits excellent cycle stability after 100 loops with only 0.154% per cycle capacity fade and improved voltage degradation. Given this, this work provides a potential avenue for rational design of lattice oxygen-based electrode materials with high-energy-density.

25 ENERGY STORAGE↗
DOE OSTI2025

WigglyRivers: A tool to characterize the multiscale nature of meandering channels

Channel sinuosity is ubiquitous along river networks, producing complex patterns that encapsulate and influence morphodynamic processes and ecosystem services. Accurately characterizing these patterns is challenging with traditional curvature-based algorithms. Here, in this study, we present WigglyRivers, a Python package that builds on existing wavelet-based methods to create an unsupervised meander identification and characterization tool. The package uses planimetric information the user provides or from the USGS’s High-Resolution National Hydrography Dataset to characterize individual reaches or entire river networks. WigglyRivers also includes a supervised river identification tool for manually selecting individual meandering features. Here, we provide examples of idealized river transects and show the capabilities of WigglyRivers. We also use the supervised identification tool to validate the unsupervised identification on river transects across the continental US. WigglyRivers is a tool to understand better the multiscale characteristics of river networks and the link between river geomorphology and river corridor connectivity.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Review of stability and thermal conductivity enhancements for salt hydrates

Salt hydrates can be used as phase change materials for thermal energy storage. Critical technical challenges for their widespread deployment include poor cycling stability, large supercooling, and low thermal conductivity. Here in this work, numerous enhancement techniques are reviewed. Related to stability, numerous existing methods to characterize the number of thermal cycles are summarized. Following this, 11 techniques to mitigate phase separation (plus 9 studies on macro-, micro-, and nano-encapsulation types) are reviewed. For supercooling, 38 nucleator-salt hydrate combinations to minimize subcooling are reviewed. The empirically observed effect of isomorphism in minimizing subcooling is explored and discussed, with cross-study trends depicted for 38 nucleators across 9 salt hydrates. In addition, several studies reporting combined effects on stability and supercooling are presented. Related to thermal conductivity, 32 combinations of conductivity enhancement material and salt hydrate are reviewed. For those using graphite, the dependence of conductivity enhancement on graphite mass fraction is shown across numerous studies for different graphite types. The performance and stability of calcium chloride hexahydrate, sodium sulfate decahydrate, and sodium acetate were explored and are discussed in-depth. Finally, the status of enhancement to salt hydrates is summarized, and remaining challenges are identified.

25 ENERGY STORAGE↗
DOE OSTI2022

Processing of phase change materials by fused deposition modeling: Toward efficient thermal energy storage designs

We report that recently, several efforts have emerged that employ additive manufacturing techniques to integrate phase change material (PCM) thermal energy storage into geometrically complex designs for advanced thermal management. In this work, we contribute to this emerging research by reporting on the production of a composite nylon-based filament for fused deposition modeling incorporating encapsulated PCMs for 3D printing heat sink geometries. Microencapsulated PCM (MEPCM) with a 6 degrees C transition temperature was selected as the material for thermal energy storage. This transition temperature was selected due to its suitability to provide thermal energy storage to target air-conditioning applications in buildings. In an attempt to improve the thermal conductivity of the composite, fine boron nitride fillers were added, although the effect on improvement was found to be negligible in the overall composite mixture. The nylon-MEPCM ratio in the filaments was optimized, and filaments containing up to 40 wt% MEPCM were successfully synthesized, which were found optimal for 3D printing complex heat sink and other geometries. Thermal and mechanical properties of the filaments were characterized, including latent heat of fusion, thermal conductivity, phase change temperature, tensile strength, and more. Thermal infrared imaging of heat sink geometries printed using the MEPCM filaments undergoing thermal discharging was also conducted. This work presents the most promising result to date in the open literature for a 3D-printed PCM composite in the combination of size, energy density, and geometric complexity of printed parts.

25 ENERGY STORAGE↗
DOE OSTI2019

Calcination pretreatment effects on acid leaching characteristics of rare earth elements from middlings and coarse refuse material associated with a bituminous coal source

The pretreatment of middlings and coarse refuse material collected from a Pocahontas No.3 coal source using calcination was investigated for the potential of improving the leaching recovery of rare earth elements. Calcination at 600 °C significantly and preferentially improved light REE (LREE) recovery to values in the range of 80-90% using 1.2 M HCl. The positive effect was due to the increased pore diameter and volume as well as thermal decomposition of the minerals associated with the LREEs. Heavy REE recovery was not increased after calcination at 600 °C due to the need for higher temperatures for the thermal decomposition of HREE minerals. Furthermore, some HREEs were also associated with sulfide minerals (e.g., pyrite) which were transformed into low-solubility oxides (e.g., hematite) after roasting at 600 °C. Based on the leaching characteristics of the major elements (Fe, Al, Ca and Mg) and REEs along with SEM EDX data, it was concluded that REEs in the two samples mainly occurred as phosphate minerals. In the middlings, some of the minerals were completely encapsulated by kaolinite, which was less apparent in the coarse refuse. In addition, it was found that a portion of the REEs (10-25%) in the samples were associated with micro-dispersed material in the organic matrix and was released after calcination and easily recovered using 0.1M (NH 4 ) 2 SO 4 solution at pH 5. In conclusion, Scandium primarily occurred in mineral forms with minimum amounts associated with ion-adsorbed clays and organic association.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2020

Characterization and recovery of rare earth elements and other critical metals (Co, Cr, Li, Mn, Sr, and V) from the calcination products of a coal refuse sample

Here, the impacts of calcination on the leaching recovery of rare earth elements (REEs) and other critical metals from a Baker seam coal refuse material were investigated. Acid leaching test results showed that leaching recovery of the REEs, especially the light REEs, was increased significantly from around 24% to 80–90% after calcination under 600–750 °C for two hours. By considering the major element leaching kinetics and the mineralogical changes of the dominant minerals caused by calcination, two mechanisms were proposed for the improved leaching performance: (1) decomposition of difficult-to-dissolve REE-bearing minerals into soluble forms; and (2) liberation of REE-bearing minerals encapsulated in clays after calcination due to the dehydration and disintegration of the layered clay structure. Sequential chemical extraction tests showed that a significant fraction (around 75%) of the REEs in the raw material were present in an insoluble form. After calcination under proper temperatures (600–800 °C), the majority of the insoluble light REEs (LREEs) were converted into soluble forms. Changes in the modes of occurrence of the LREEs and phosphorous based on leaching rate and sequential leaching correlated well as a function of the calcination temperature. This finding in addition to SEM-EDX results tends to indicate the potential that the LREEs occur primarily as rare earth phosphates such as monazite in the untreated coal refuse material. The acid leaching and sequential chemical extraction results show that co-extraction of REEs and other critical metals such as Co, Mn, and Li is possible using a calcination-acid leaching procedure.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2020

Enhanced activity and stability of MgO-promoted Ni/Al 2 O 3 catalyst for dry reforming of methane: Role of MgO

Highly dispersed nickel nanoparticles (NPs) were deposited on Al 2 O 3 NPs by atomic layer deposition (ALD). Various amounts of MgO were loaded on Ni/Al 2 O 3 catalysts by the incipient wetness (IW) method for dry reforming of methane. Fresh and used catalysts were systematically characterized to reveal the effects of MgO on the catalytic performance. MgO was found to increase the basic amount and basic strength of catalyst surfaces, which provided additional surface oxygen species and assisted the adsorption and activation of CO 2 . Although the formation of NiO-MgO solid solution, during the calcination of incipient wetness, did not improve the overall reducibility, the Ni NPs from NiO-MgO solid solution after reduction formed an intimate interaction with MgO, which could inhibit Ni NPs from sintering and provide sufficient metal-support interface for CO 2 activation. The MgO-promoted Ni/Al 2 O 3 reached a methane reforming rate of 1780 L CH4 g Ni -1 h -1 at 850 °C, which is 26% more than that of the pristine Ni/Al 2 O 3 . Finally, the higher CO 2 activity enhanced the oxidation rate of the surface carbon generated from side-reactions, thereby resulting in a higher reforming rate and inhibiting coke formation, especially the detrimental graphitic encapsulating carbon on the active nickel surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Locality-aware and load-balanced static task scheduling for MapReduce

Task scheduling for MapReduce jobs has been an active area of research with the objective of decreasing the amount of data transferred during the shuffle phase via exploiting data locality. In the literature, generally only the scheduling of reduce tasks is considered with the assumption that scheduling of map tasks is already determined by the input data placement. However, in cloud or HPC deployments of MapReduce, the input data is located in a remote storage and scheduling map tasks gains importance. Here, we propose models for simultaneous scheduling of map and reduce tasks in order to improve data locality and balance the processors’ loads in both map and reduce phases. Our approach is based on graph and hypergraph models which correctly encode the interactions between map and reduce tasks. Partitions produced by these models are decoded to schedule map and reduce tasks. A two-constraint formulation utilized in these models enables balancing processors’ loads in both map and reduce phases. The partitioning objective in the hypergraph models correctly encapsulates the minimization of data transfer when a local combine step is performed prior to shuffle, whereas the partitioning objective in the graph models achieve the same feat when a local combine is not performed. Here, we show the validity of our scheduling on the MapReduce parallelizations of two important kernel operations – sparse matrix–vector multiplication (SpMV) and generalized sparse matrix–matrix multiplication (SpGEMM) – that are widely encountered in big data analytics and scientific computations. Compared to random scheduling, our models lead to tremendous savings in data transfer by reducing data traffic from several hundreds of megabytes to just a few megabytes in the shuffle phase and consequently leading up to 2.6x and 4.2x speedup for SpMV and SpGEMM, respectively.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2015

Effects of soluble flavin on heterogeneous electron transfer between surface-exposed bacterial cytochromes and iron oxides

Dissimilatory iron-reducing bacteria can utilize insoluble Fe(Mn)-oxides as a terminal electron acceptor under anaerobic conditions. For Shewanella species specifically, some evidence suggests that iron reduction is associated with the secretion of flavin mononucleotide (FMN) and riboflavin that are proposed to mediate electron transfer (Marsili et al., 2008). In this work, we used methyl viologen (MV•+)-encapsulated, porin-cytochrome complex (MtrCAB) embedded liposomes (MELs) as a synthetic model of the Shewanella outer membrane to investigate the proposed mediating behavior of secreted flavins. The reduction kinetics of goethite, hematite and lepidocrocite (200 µM) by MELs ([MV•+] ~ 42 µM and MtrABC ≤ 1 nM) were determined in the presence FMN at pH 7.0 in N2 atmosphere by monitoring the concentrations of MV•+ and FMN through their characteristic UV-visible absorption spectra. Experiments were performed where i) FMN and Fe(III)-oxide were mixed and then reacted with the reduced MELs and ii) FMN was reacted with the reduced MELs followed by addition of Fe(III)-oxide. The redox reactions proceeded in two steps: a fast step that was completed in a few seconds, and a slower one lasting over 400 seconds. For all three Fe(III)-oxides, the initial reaction rate in the presence of a low concentration of FMN (≤ 1 µM) was at least a factor of five faster than those with MELs alone, and orders of magnitude faster than those by FMNH2, suggesting that FMN may serve as a co-factor that enhances electron transfer from outer-membrane c-cytochromes to Fe(III)-oxides. The rate and extent of the initial reaction followed the order of lepidocrocite > hematite > goethite, the same as their reduction potentials, implying thermodynamic control on reaction rate. However, at higher FMN concentrations (> 1 µM), the reaction rates for both steps decreased and varied inversely with FMN concentration, indicating that FMN inhibited the MEL to Fe(III)-oxide electron transfer reaction. The implications of the observed kinetic behaviors to flavin-mediated Fe(III) oxide reduction in natural environments are discussed.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2021

Co-precipitation induces changes to iron and carbon chemistry and spatial distribution at the nanometer scale

Association of organic matter (OM) with mineral phases via co-precipitation is expected to be a widespread process in environments with high OM input and frequent mineral dissolution and re-precipitation. In contrast to surface area-limited adsorption processes, co-precipitation may allow for greater carbon (C) accumulation. However, the potential sub-micrometer scale structural and compositional differences that affect the bioavailability of co-precipitated C are largely unknown. In this work, we used a combination of high-resolution analytical electron microscopy and bulk spectroscopy to probe interactions between a mineral phase (ferrihydrite, nominally Fe 2 O 3 •0.5H 2 O) and organic soil-derived water-extractable OM (WEOM). In co-precipitated WEOM-Fe, nanometer-scale scanning transmission electron microscopy with electron energy loss spectroscopy (STEM-EELS) revealed increased Fe(II) and less Fe aggregation relative to adsorbed WEOM-Fe. Spatially distinct lower- and higher-energy C regions were detected in both adsorbed and co-precipitated WEOM-Fe. In co-precipitates, lower-energy aromatic and/or substituted aromatic C was spatially associated with reduced Fe(II), but higher-energy oxidized C was enriched at the oxidized Fe(III) interface. Therefore, we show that co-precipitation does not constitute a non-specific physical encapsulation of C that only affects Fe chemistry and spatial distribution, but may cause a bi-directional set of reactions that lead to spatial separation and transformation of both Fe and C forms. In particular, we propose that abiotic redox reactions between Fe and C via substituted aromatic groups (e.g., hydroquinones) play a role in creating distinct co-precipitate composition, with potential implications for its mineralization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗