Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Distributed wind”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

A visual investigation of the separation and subsequent transition near the leading edge of airfoils

Subsonic (5 to 30 m/sec) wind tunnels were used to measure pressure distributions at the leading edge and upper surface of airfoil models and to obtain high-speed movie photographs of smoke-visualized separation, transition, and reattachment phenomena. Points of turbulent shear layer reattachment could be determined by using an oil-mixture coating on the surface. Plots of the static pressure coefficient along the chord of several models are presented, and the measured separation, transition, and reattachment points are plotted against the chord Reynolds number.

Arena, A. V.↗

Pressure measurements on an ogive-cylinder at high angles of attack with laminar, transitional, or turbulent separation

This paper reports results from pressure tests on an ogive-cylinder in the low-turbulence 12-foot pressure wind tunnel. The results consist of pressure distributions over a wide range of Reynolds numbers and angles of attack. The tests encompassed a complete coverage of different roll orientations shown to be essential in order to fully define all the possible flow conditions. When the various roll-angle results are combined, it is possible to interpret the effects of changing angle of attack or Reynolds number. Two basic mechanisms for producing asymmetric flow are identified. One mechanism operates in both the laminar and the fully turbulent separation regimes; this mechanism is the one qualitatively described by the impulsive flow analogy. The other mechanism occurs only in the transitional separation regime. This asymmetric flow has the same form as that in the two-dimensional crossflow on a circular cylinder in the transitional flow regime. Finally, these results make it possible to draw up critical Reynolds number boundaries between the laminar, transitional, and fully turbulent separation regimes throughout the angle-of-attack range from 20 to 90 deg.

Lamont, P. J.↗

Turbine endwall two-cylinder program

A series of experiments to study the three dimensional separation of fluid flow around two isolated cylinders mounted on an endwall are described. Topics covered include: (1) water tunnel testing for both the single and double cylinder cases; (2) wind tunnel flow characteristics; (3) static pressure distribution measured on the cylinders; and (4) design and construction of a pressure reference system.

Langston, L. S.↗

Solar Wind Five

Topics of discussion were: solar corona, MHD waves and turbulence, acceleration of the solar wind, stellar coronae and winds, long term variations, energetic particles, plasma distribution functions and waves, spatial dependences, and minor ions.

Neugebauer, M.↗

Thermal stress analysis for a wood composite blade

Heat conduction throughout the blade and the distribution of thermal stresses caused by the temperature distribution were determined for a laminated wood wind turbine blade in both the horizontal and vertical positions. Results show that blade cracking is not due to thermal stresses induced by insulation. A method and practical example of thermal stress analysis for an engineering body of orthotropic materials is presented.

Fu, K. C.↗

Experimental investigation of the aerodynamic effects of distributed spanwise blowing on a fighter configuration

The results of wind tunnel tests at NASA Langley targeted at the performance and configurational characteristics of 0.1 and 0.13 scale model spanwise blowing (SWB) jet wing concepts are reported. The concept involves redirection of engine compressor bleed air to provide SWB at the fuselage-wing juncture near the wing leading edge. The tests covered the orientation of the outer panel nozzles, the effects of SWB operation on the performance of leading and trailing edge flaps and the effects of SWB on lateral stability. The trials were run at low speeds and angles of attack from 24-45 deg (landing). Both lift and longitudinal stability improved with the SWB, stall and leading edge vortex breakdown were delayed and performance increased with the SWB rate. Lateral stability was degraded below 20 deg angle of attack while instabilities were delayed above 20 deg due to roll damping.

Huffman, J. K.↗

Results of a M = 5.3 heat transfer test of the integrated vehicle using phase-change paint techniques on the 0.0175-scale model 56-OTS in the NASA/Ames Research Center 3.5-foot hypersonic wind tunnel

An experimental investigation was performed in the NASA/Ames Research Center 3.5-foot Hypersonic Wind Tunnel to obtain supersonic heat-distribution data in areas between the orbiter and external tank using phase-change paint techniques. The tests used Novamide SSV Model 56-OTS in the first and second-stage ascent configurations. Data were obtained at a nominal Mach number of 5.3 and a Reynolds number per foot of 5 x 10 to the 6th power with angles of attack of 0 deg, +/- 5 deg, and sideslip angles of 0 deg and +/- 5 deg.

Marroquin, J.↗

Plasma measurements of the Pioneer Venus Orbiter in the Venus ionosheath - Evidence for plasma heating near the ionopause

A study of the angular spread of plasma fluxes detected in the Venus ionosheath is presented. It is shown that in the inner regions of the ionosheath, where the flux intensity is severely decreased with respect to solar wind values, the width of the azimuthal distribution of the local plasma is comparable to, or even larger than, that of the stronger fluxes measured in the outer ionospheath. The observed variation of the angular width suggests the existence of a source of heating near the ionopause but is not consistent with the overall cooling that would be expected if mass loading and charge exchange collisions were solely responsible for the interaction process at that boundary. Dissipative phenomene associated with local plasma turbulence processes seem to be required to account for the broad angular distributions seen near the ionopause.

Perez-De-tejada, H.↗

Wind tunnel tests of rotor blade sections with replications of ice formations accreted in hover

Full scale reproductions of ice accretions molded during the documentation of a hover test program were fabricated by means of epoxy castings and used for a wind tunnel test program. Surface static pressure distributions were recorded and used to evaluate lift and pitching moment increments while drag was determined by wake surveys. Through the range of the tests, corresponding to those conditions encountered in hover and in flat pitch, integration of the pressure distributions showed negligible changes in lift and in pitching moment, but the drag was significantly increased.

Lee, J. D.↗

Computation of three-dimensional flow about aerobrake configurations

Ellipsoid, cone and cylinder aerobrake configurations are analyzed to provide comparison data between experimental and model predictions. An analytical model was devised to account for the shock layer ahead of the body and in the near-wake region in terms of the Navier-Stokes equations expressed in conformal polar and azimuthal-angle coordinates. Using polar coordinates simplified the equations by mapping the body onto a sphere, a procedure which also reduced the magnitude of the discretization errors. The equations are then solved using an alternating direction implicit (ADI) factorization technique. Computations were carried out for Mach 3-10 at various grid resolutions and compared with available wind tunnel data. The model generated pressure distributions, heat transfer coefficients and velocity profile data that agreed relatively well with experimental data at a reduced computational cost. Further work is necessary to identify the location of shocks and to model flows about asymmetric configurations.

Li, C. P.↗

The aerodynamics of rotor blades with ice shapes accreted in hover and in level flight

Through a series of flights in artificial clouds, ice accretions on the main rotor of a UH-1H helicopter were documented in detail upon landing by silicone-rubber molds for both hover and level flights. Full scale reproductions of typical accretions in hover were fabricated by means of epoxy castings and used for a wind-tunnel test program. Surface static pressure distributions were recorded and used to evaluate lift and pitching moment increments while drag was determined by wake surveys. For comparison, accreted ice shapes are presented for two level flight cases as well as preliminary analytical predictions.

Lee, J. D.↗

Atmospheric circulation of Venus

Observational data of Venus are utilized to study rotational effects on atmospheric circulations. The high surface temperature and planetary-scale turbulent motion at cloud tops, and the relation between energy and momentum budget are examined. The limited amount of data available on the vertical and horizontal distribution of net radiative heating, the zonal wind structure, and waves affects the study of the temperature and motion on Venus. The limitations of the scaling analysis used to estimate the properties of the circulation as regards the cyclostrophic balance, the extent of the Hadley circulation, large-scale wave transport, vertical propagation of waves, convection, and turbulence are considered. Hypotheses concerned with the deep, cloud-level, and upper atmospheres of Venus are proposed. Future research in the areas of propagating planetary- scale waves, zonal flow and planetary-scale wave instability processes, and convection is suggested.

Rossow, W. B.↗

Earth's compressional foreshock boundary revisited Observations by the ISEE 1 magnetometer

A 'solar foreshock coordinate' (SFC) system is introduced in which the positions of foreshock components can be collated with a minimum of assumptions about the physical processes involved. Location behind the interplanetary magnetic field (IMF) tangent surface to the bow shock and rotational symmetry around the solar wind flow (X) axis are the only presuppositions. The SFC system has been applied to over 300 observations of the boundary of the ULF compressional waves recorded by ISEE 1's magnetometer in 1978 and 1979. The boundary locations form a coherent pattern in the SFC frame. A selection of those cases for which the cone angle of the IMF was between 40 and 50 deg, corresponding to the average stream angle, yields a least square line whose mapping back to the solar ecliptic coordinates frame has slope of about 85 deg, very close to that of the tangent ULF boundary deduced earlier from more primitive methods with entirely different data sets. The line, being parallel to neither the IMF, the typical reflected beam, nor the shock, cannot be compatible with any model of wave production by beam-solar wind interaction that depends on uniform beam distribution or fixed growth rate. Rather, its tangency suggests the influence of a separate, escaping ion population.

Greenstadt, E. W.↗

The Surface Wave Dynamics Experiment (SWADE)

SWADE was developed to study the dynamics of the wave field development in the open ocean with the following specific objectives: (1) to understand the development of the wave directional spectrum under various conditions; (2) to determine the effect of waves on the air/sea transfers of momentum, heat, and mass; (3) to determine breaking distributions as a function of sea state, wind, and boundary stability; and (4) to provide data and analyses for ERS-1 validation. The experiment is designed for the winter of 1990 to 1991. Four buoys will be deployed for 6 months starting October 1990 and ending March 1991. During that time period, three intensive periods of 2 weeks duration each will be selected for frequent aircraft flights for wave data collection to satisfy scientific studies, as well as ERS-1 validation needs.

Long, S. R.↗

Ion-wind effects on Poiseuille and Blasius flow

In order to study the effects of ion wind on the plane Poiseuille flow in a channel and Blasius flow on a flat plate, the equations of electrogasdynamics are solved numerically under the assumptions that the flow is incompressible, that the electric field is steady, and that the fluid velocity is negligible compared to ion drift velocity. The results show that ion wind strongly affects the skin-friction distribution for these flows.

Van Rosendale, J. R.↗

On the source of diffuse, suprathermal ions observed in the vicinity of the earth's bow shock

ISEE 2 data from the Fast Plasma Experiment were used to search for upstream 'diffuse' suprathermal ion events observed at times when the local IMF was nearly radial and the spacecraft was positioned at local times greater than 1530. For these observing conditions, which correspond to a local theta-Bn of about 45 deg, the field lines sampled should be at least 4 earth radii from the earth's magnetopause. A number of diffuse ion events which satisfy these conditions were found, and two of them are described in detail. The results show that the events are observed in association with large-amplitude low-frequency magnetic field fluctuations; the suprathermal particle velocity distributions are roughly isotropic in the solar wind frame, and the spectra extend smoohtly to energies beyond 40 keV. It is suggested that diffuse ion events observed in the vicinity of the bow shock at energies below 40 keV are primarily caused by shock processes.

Gosling, J. T.↗

Abstracts for the International Conference on Asteroids, Comets, Meteors 1991

Topics addressed include: chemical abundances; asteroidal belt evolution; sources of meteors and meteorites; cometary spectroscopy; gas diffusion; mathematical models; cometary nuclei; cratering records; imaging techniques; cometary composition; asteroid classification; radio telescopes and spectroscopy; magnetic fields; cosmogony; IUE observations; orbital distribution of asteroids, comets, and meteors; solar wind effects; computerized simulation; infrared remote sensing; optical properties; and orbital evolution.

Source record↗

Measurements of the flow around a lifting-wing/body junction

Detailed measurements of all three mean velocity components and five of the six Reynolds stresses have been made around a model of a lifting-wing/body junction. The body was the flat working section floor of a small blower wind tunnel. Measurements of the surface pressure distribution on the NACA 0012 wing showed that the lift coefficient at the body surface was reduced by only 16 percent from the freestream value. It is shown that the near constancy of the bound vorticity requires the formation of aixal vorticity within the body boundary layer. This vorticity was concentrated in the two legs of the necklace vortex formed near the leading edge of the wing. The magnitude of the vorticity was always greater in the leg that developed on the suction surface. By four chord lengths downstream of the trailing edge, the turbulence structure of the suction leg was qualitatively similar to that of a single vortex imbedded in a turbulent boundary layer.

Wood, D. H.↗