Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Device”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

The Steerable Microcatheter: A New Device for Selective Catheterisation

The steerable microcatheter (SwiftNINJA, Sumitomo Bakelite, Tokyo, Japan), which has a remote-controlled flexible tip manipulated using a dial in the handgrip, was recently developed and delivered to the market. This device enables the user to change the angle of the microcatheter tip manually, and potentially makes selective catheterisation easier. We evaluated its unique characteristics and utility in selective catheterisation and coil embolization. This article describes: (1) the advantages of this device in catheterisations involving acute angle branches, and (2) a new technique of compact coil packing with the use of intentional folding by the bendable tip of the catheter.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Performance of a Robotic Assistance Device in Computed Tomography-Guided Percutaneous Diagnostic and Therapeutic Procedures

PurposeTo evaluate a commercially available robotic assistance device for computed tomography-guided diagnostic and therapeutic interventions, compared to regular, manually performed CT scan-guided interventions in terms of precision, exposure to radiation to the patient and intervention time.Materials and MethodsOver a period of 6 months, 55 consecutive patients were recruited and treated using robotic assistance and compared to a control group of 101 patients previously treated with a regular CT scan-guided, manual approach. Evaluated parameters were precision (deviation from planned target and number of needle replacements), radiation exposure to the patient and intervention time. Evaluations were performed with regard to complexity (in-plane vs out-of-plane interventions) and type of anesthesia (general vs local).ResultsParameters related to precision were in general significantly better in the robotic assistance group (p < 0.01) with a mean deviation of 1.2 mm (± 1.6 mm) compared to 2.6 mm (± 1.1 mm) in the comparison group. Compared to manual procedure, the mean intervention time was reduced by 15 min (± 5.4 min) on average for an out-of-plane needle placement in the robotic group. There was no increase of exposure to radiation to the patient while radiation exposure for the physician was reduced to zero when the navigation system was used.ConclusionCompared to manual placement, the use of a robotic assistance device in out-of-plane CT-guided interventions under general anesthesia allows for probe placement with high precision. Intervention time is reduced with no increase of exposure to radiation to the patient.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Current Status of Endovascular Preservation of the Internal Iliac Artery with Iliac Branch Devices (IBD)

Endovascular aneurysm repair (EVAR) has become the most utilized treatment for abdominal aortic aneurysms (AAA), but the presence of common iliac dilatation or aneurysm may prevent the achievement of effective distal seal and fixation. Ideal repair in these cases should involve both effective preservation of the pelvic circulation and durable exclusion of the AAA. Unilateral or bilateral internal iliac artery (IIA) preservation with iliac branch devices (IBD) is safe, feasible and effective with technical and clinical outcomes comparable to standard EVAR. The versatility of current devices has allowed extended application to complex cases, but must be considered carefully in difficult anatomies. Pending long-term durability results and formal cost-effectiveness appraisals, IBD implantation has several advantages to anatomically eligible patients as compared with other available open or endovascular/hybrid solutions for IIA preservation during EVAR for aortoiliac aneurysms.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Influence of the Length of a Torch Tongue on Heat Flow in a Burner Device

Results of mathematical modeling of the burner torch of the furnaces of steam boilers with radiating cylindrical gas volumes are presented. As a result of modeling it is established that with a short torch tongue, the heat flows to the burner device can be significant and the service life of the burners reduced. By means of calculations it is established that with a 1.5 – 2-fold increase in the length of the torch tongue at constant power, heat flow decreases 2 – 3-fold in the burner device and the useful life of the latter increases to 10 years and more.

42 ENGINEERING↗

An Overview of the Hybrid Illinois Device for Research and Applications Material Analysis Test-stand (HIDRA-MAT)

The Hybrid Illinois Device for Research and Applications (HIDRA) at the University of Illinois at Urbana-Champaign is a toroidal plasma device that enables fusion plasma-material interaction testing with both stellarator and tokamak plasmas. HIDRA’s long-pulse steady state stellarator plasmas provide a testbed for plasma facing component (PFC) plasma exposures. The HIDRA Material Analysis Test-stand (HIDRA-MAT) is a material characterization module attached to HIDRA that is being designed and fabricated to include thermal desorption spectroscopy and laser induced breakdown spectroscopy systems for in-vacuo PFC characterization. A specialized rotatable sample holder positions the sample for liquid metal droplet application from a liquid metal droplet injector on HIDRA-MAT. Early experiments look to investigate the effect liquid lithium has on porous tungsten samples’ retention of H, D, and He after plasma exposure. Preliminary results from a dual residual gas analyzer system show the ability to differentiate D2 and He in HIDRA-MAT. Finally, this work aims to advance the understanding of liquid metal PFCs and further the design and development of new fusion PFCs and technologies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Impurity Powder Injection Experiments in the Large Helical Device

The Impurity Powder Dropper (IPD) is a device capable of injecting controlled amounts of sub-millimetre powder into the plasma under the action of gravity. In 2019 the IPD was first installed on the Large Helical Device (LHD) in Japan, with the aim of improving the plasma performances through real time boronization and assessing the compatibility of this technique with steady state operation. Extensive series of experiments have been performed using the IPD, focused on the improvement of the plasma performance via low-Z powder injection and the understanding of the underlying physical phenomena. In this article, we review the experiments that took place in the period 2019-2024. The main results include the demonstration of the improvement of the wall conditions (reduction of intrinsic impurity content, wall recycling) both on a shot-to-shot basis and in real time. Furthermore, a reduced-turbulence improved confinement regime has been observed coincident with powder injection, resulting in an increase of the plasma temperature of the order of 25%, with enhancements that can reach up to 50% for ion temperature.

Nespoli, F. [Princeton Plasma Physics Laboratory (↗

Characterization of microscale wear in a ploysilicon-based MEMS device using AFM and PEEM-NEXAFS spectromicroscopy.

Mechanisms of microscale wear in silicon-based microelectromechanical systems (MEMS) are elucidated by studying a polysilicon nanotractor, a device specifically designed to conduct friction and wear tests under controlled conditions. Photoelectron emission microscopy (PEEM) was combined with near-edge X-ray absorption fine structure (NEXAFS) spectroscopy and atomic force microscopy (AFM) to quantitatively probe chemical changes and structural modification, respectively, in the wear track of the nanotractor. The ability of PEEM-NEXAFS to spatially map chemical variations in the near-surface region of samples at high lateral spatial resolution is unparalleled and therefore ideally suited for this study. The results show that it is possible to detect microscopic chemical changes using PEEM-NEXAFS, specifically, oxidation at the sliding interface of a MEMS device. We observe that wear induces oxidation of the polysilicon at the immediate contact interface, and the spectra are consistent with those from amorphous SiO{sub 2}. The oxidation is correlated with gouging and debris build-up in the wear track, as measured by AFM and scanning electron microscopy (SEM).

36 MATERIALS SCIENCE↗

Probing Phase Transformations and Microstructural Evolutions at the Small Scales: Synchrotron X-ray Microdiffraction for Advanced Applications in [Phase 3 Memory,] 3D IC (Integrated Circuits) and Solar PV (Photovoltaic) Devices

Synchrotron x-ray microdiffraction (μXRD) allows characterization of a crystalline material in small, localized volumes. Phase composition, crystal orientation and strain can all be probed in few-second time scales. Crystalline changes over a large areas can be also probed in a reasonable amount of time with submicron spatial resolution. However, despite all the listed capabilities, μXRD is mostly used to study pure materials but its application in actual device characterization is rather limited. This article will explore the recent developments of the μXRD technique illustrated with its advanced applications in microelectronic devices and solar photovoltaic systems. Application of μXRD in microelectronics will be illustrated by studying stress and microstructure evolution in Cu TSV (through silicon via) during and after annealing. Here, the approach allowing study of the microstructural evolution in the solder joint of crystalline Si solar cells due to thermal cycling will be also demonstrated.

36 MATERIALS SCIENCE↗

Performance of Functionally Graded Thermoelectric Materials and Devices: A Review

Direct energy conversion using thermoelectric generators (TEGs) is a research area of growing interest because of its potential for increasing energy efficiency. Bulk thermoelectric modules are used widely in industry as Peltier cooling devices. Currently, only bismuth telluride modules are commercially available for power generation. Significant efforts have been put into exploring promising materials and techniques to improve the figure of merit ( zT ) at laboratory scale (5–20 g). A variety of techniques have been investigated to improve the output and useful temperature range for common industrial TEGs made from bulk polycrystalline materials including segmentation, geometric pinning, and property gradients. However, the improvement in zT at device level (500–1000 g and up) is exceptionally limited. In addition, the thermal degradation of TEGs occurs when cracks form due to thermal stresses that arise from transient heat sources, which consequently lead to a decreased lifetime. Functionally graded material (FGM) thermoelectrics in bulk and polycrystalline form have been developed to mitigate some of these issues by improving the temperature bandwidth, current output range, and lifetime. The present work provides a review of functionally graded TEGs, including their manufacturing, usage and current techniques for improving their performance. Furthermore, this article also provides a pathway to additional research and approaches for improving the efficiency and temperature range, as well as reducing the property degradation of bulk polycrystalline TEGs.

36 MATERIALS SCIENCE↗

Suspended InAs Nanowire-Based Devices for Thermal Conductivity Measurement Using the 3ω Method

We demonstrated device architectures implementing suspended InAs nanowires for thermal conductivity measurements. To this aim, we exploited a fabrication protocol involving the use of a sacrificial layer. The relatively large aspect ratio of our nanostructures combined with their low electrical resistance allows to exploit the four-probe 3ω technique to measure the thermal conductivity, inducing electrical self-heating in the nanowire at frequency ω and measuring the voltage drop across the nanostructure at frequency 3ω. In our systems, field effect modulation of the transport properties can be achieved exploiting fabricated side-gate electrodes in combination with the SiO{sub 2}/Si ++ substrate acting as a back gate. Our device architectures can open new routes to the all-electrical investigation of thermal parameters in III-V semiconductor nanowires, with a potential impact on thermoelectric applications.

36 MATERIALS SCIENCE↗

The method of imbedded Lagrangian element to estimate wave power absorption by some submerged devices

A simple approach is described to estimate the wave power absorption potential of submerged devices known to cause wave focusing and flow enhancement. In particular, the presence of a flow-through power take-off (PTO) system, such as low-head turbines, can be accounted for. The wave radiation characteristics of an appropriately selected Lagrangian element (LE) in the fluid domain are first determined. In the limit of a vanishing mass, the LE reduces to a patch of distributed normal dipoles. Here, the hydrodynamic coefficients of this virtual object are then input in a standard equation of motion where the effect of the PTO can be represented, for example, as a dashpot damping term. The process is illustrated for a class of devices recently proposed by Carter and Ertekin (2011), although in a simplified form. Favorable wave power absorption is shown for large ratios of the LE wave radiation coefficient over the LE added mass coefficient. Under optimal conditions, the relative flow reduction from the PTO theoretically lies between 0.50 and 1/√2≈ 0.71, with lower values corresponding to better configurations. Wave power capture widths, the sensitivity of results to PTO damping and sample spectral calculations at a typical site in Hawaiian waters are proposed to further illustrate the versatility of the method.

16 TIDAL AND WAVE POWER↗

High-performance oxygen reduction and evolution carbon catalysis: From mechanistic studies to device integration

The development of high-performance and low-cost oxygen reduction and evolution catalysts that can be easily integrated into existing devices is crucial for the wide deployment of energy storage systems that utilize O 2 -H 2 O chemistries, such as regenerative fuel cells and metal-air batteries. Herein, we report an NH 3 -activated N-doped hierarchical carbon (NHC) catalyst synthesized via a scalable route, and demonstrate its device integration. The NHC catalyst exhibited good performance for both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER), as demonstrated by means of electrochemical studies and evaluation when integrated into the oxygen electrode of a regenerative fuel cell. The activities observed for both the ORR and the OER were comparable to those achieved by state-of-the-art Pt and Ir catalysts in alkaline environments. We have further identified the critical role of carbon defects as active sites for electrochemical activity through density functional theory calculations and high-resolution TEM visualization. As a result, this work highlights the potential of NHC to replace commercial precious metals in regenerative fuel cells and possibly metal-air batteries for cost-effective storage of intermittent renewable energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reconstructing the membrane detection of a 1D electrostatic-driven MEMS device by the shooting method: convergence analysis and ghost solutions identification

In this paper, in the domain of 1D-membrane micro-electro-mechanical systems in which the electrostatic field is expressed in terms of geometric curvature of the membrane, we present a numerical approach based on shooting techniques to reconstruct the membrane profile in the device in steady-state case. In particular, starting from known results in literature about existence achieved by Schauder–Tychonoff’s fixed point approach and uniqueness, and focusing on two physical–mathematical parameters appropriately indicative of the applied voltage and electromechanical properties of the membrane, respectively, we will discuss what operation parameters (applied voltage, amplitude of electrostatic field) and for which electromechanical membrane characteristic of the device is permitted or not a convergence of the method with respect to analytical results. Finally, we will discuss in detail the detected ghost solutions.

97 MATHEMATICS AND COMPUTING↗

Machine learning for arbitrary single-qubit rotations on an embedded device

Here, in this study, we present a technique for using machine learning (ML) for single-qubit gate synthesis on field-programmable logic for a superconducting transmon-based quantum computer based on simulated studies. Our approach is multi-stage. We first “bootstrap” a model based on simulation with access to the full state vector for measuring gate fidelity. We next present an algorithm, named adapted randomized benchmarking (ARB), for fine-tuning the gate on hardware based on measurements of the devices. We also present techniques for deploying the model on programmable devices with care to reduce the required resources. While the techniques here are applied to a transmon-based computer, many of them are portable to other architectures.

97 MATHEMATICS AND COMPUTING↗

Quantum dynamics of a small symmetry breaking measurement device

Highlights: • Ferromagnetic measurement device exploits symmetry breaking to measure a spin. • Quantum interaction results in loss of phase coherence of test object. • Dynamics lead to sizeable correlation with, and enhancement of, microscopic object. • No reliable registration of pointer readings is observed after decoupling spin. - Abstract: A quantum measuring instrument is constructed that utilises symmetry breaking to enhance a microscopic signal. The entire quantum system consists of a system–apparatus–environment triad that is composed of a small set of spin-1/2 particles. The apparatus is a ferromagnet that measures the z-component of a single spin. A full quantum many-body calculation allows for a careful examination of the loss of phase coherence, the formation and amplification of system–apparatus correlations, the irreversibility of registration, the fault tolerance, and the bias of the device.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evaluation of PbTe and SnTe as Ohmic Contact Layers in CdTe Solar Cell Devices

For solar cells based on CdTe, the choice of a suitable back contact material is limited by CdTe's deep work function. Here, we explored p-type PbTe and SnTe as ohmic contacts to CdTe. These contact layers were grown on single crystal CdTe substrates by molecular beam epitaxy, and the valence band offset between film and substrate was measured using X-ray photoemission spectroscopy. Polycrystalline device structures were also grown by sublimation to assess performance improvements. Doping was achieved in PbTe by thallium incorporation. Only the highest Tl doped PbTe resulted in a desirable band alignment with the CdTe, forming an electron reflector and no hole barrier. Time-resolved photoluminescence measurements also revealed significant photocarrier lifetime improvements for only the highest doped PbTe. Consequentially, devices incorporating the highest doped PbTe layers showed increased power conversion efficiency, primarily from increased fill factor. Doping of the PbTe was measured via Hall effect with variable magnetic field, which was required due to the formation of an n-type parasitic interface layer. To properly interpret the variable field Hall measurements, we derived an expression for the magnetic field-dependent conductivity tensor of an L-valley semiconductor.

anisotropic band valley↗

Plasma treating water for nitrate based nitrogen fertilizer - A review of recent device designs

Atmospheric pressure air plasma treatment of water is a promising alternative to the industrially intensive Haber-Bosch process for the production of nitrogen fertilizer. Nitrogen fertilizer is vital for plant life, and the environmental impacts of modern fertilizer application cannot be neglected. In order to maintain or increase food production in the future, more sustainable alternatives must be investigated. Plasma can be easily operated at smaller scales, onsite, utilizing green energy sources, cutting down transportation costs and impacts. This article focuses on nitrogen fixation by plasma treating water for use as nitrogen fertilizer. Here, we highlight recent advances (within the last two years) regarding water treating plasma devices, the challenges still facing the field, and recommend more thorough collaborative investigations be carried out in order to focus on the design and optimization of these devices for the future.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SuperScreen: An open-source package for simulating the magnetic response of two-dimensional superconducting devices

Quantitative understanding of the spatial distribution of magnetic fields and Meissner screening currents in two-dimensional (2D) superconductors and mesoscopic thin film superconducting devices is critical to interpreting the results of magnetic measurements of such systems. Here, we introduce SuperScreen, an open-source Python package for simulating the response of 2D superconductors to trapped flux and applied time-independent or quasi-DC magnetic fields for any value of the effective magnetic penetration depth, Λ. Given an applied magnetic field, SuperScreen solves the 2D London equation using an efficient matrix inversion method to obtain the Meissner currents and magnetic fields in and around structures composed of one or more superconducting thin films of arbitrary geometry. Further, SuperScreen can be used to model screening effects and calculate self- and mutual-inductance in thin film superconducting devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗