Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DIFFUSION EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Radio Frequency Noise Effects on the CERN Large Hadron Collider Beam Diffusion

Radio frequency (rf) accelerating system noise can have a detrimental impact on the Large Hadron Collider (LHC) performance through longitudinal motion and longitudinal emittance growth. A theoretical formalism has been developed to relate the beam and rf station dynamics with the bunch length growth. Measurements were conducted at LHC to determine the performance limiting rf components and validate the formalism through studies of the beam diffusion dependence on rf noise. As a result, a noise threshold was established for acceptable performance which provides the foundation for beam diffusion estimates for higher energies and intensities. Measurements were also conducted to determine the low level rf noise spectrum and its major contributions, as well as to validate models and simulations of this system.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

An Investigation into the Effects of Process Conditions on the Tribological Performance of Pack Carburized Titanium with Limited Oxygen Diffusion

In the present study, a new pack carburization technique for titanium has been investigated. The aim of this treatment is to produce a titanium carbide/oxycarbide layer atop of an extended oxygen diffusion zone [α-Ti(O)]. The effects of treatment temperature and pack composition have been investigated in order to determine the optimal conditions required to grant the best tribological response. The resulting structural features were investigated with particular interest in the carbon and oxygen concentrations across the samples cross section. The optimization showed that a temperature of 925 °C with a pack composition of 1 part carbon to 1 part energizer produced surface capable of withstanding a contact pressure of ≈ 1.5 GPa for 1 h. The process resulted in TiC surface structure which offers enhanced hardness (2100 HV) and generates a low friction coefficient (μ ≈ 0.2) when in dry sliding contact with an alumina (Al{sub 2}O{sub 3}) ball. The process also produced an extended oxygen diffusion zone that helps to improve the load bearing capacity of the substrate.

36 MATERIALS SCIENCE↗

Atomistic Simulation of High‐Density Uranium Fuels

We apply an atomistic modeling approach to deal with interfacial phenomena in high‐density uranium fuels. The effects of Si, as additive to Al or as U‐Mo‐particles coating, on the behavior of the Al/U‐Mo interface is modeled by using the Bozzolo‐Ferrante‐Smith (BFS) method for alloys. The basic experimental features characterizing the real system are identified, via simulations and atom‐by‐atom analysis. These include (1) the trend indicating formation of interfacial compounds, (2) much reduced diffusion of Al into U‐Mo solid solution due to the high Si concentration, (3) Si depletion in the Al matrix, (4) an unexpected interaction between Mo and Si which inhibits Si diffusion to deeper layers in the U‐Mo solid solution, and (5) the minimum amount of Si needed to perform as an effective diffusion barrier. Simulation results related to alternatives to Si dispersed in the Al matrix, such as the use of C coating of U‐Mo particles or Zr instead of the Al matrix, are also shown. Recent experimental results confirmed early theoretical proposals, along the lines of the results reported in this work, showing that atomistic computational modeling could become a valuable tool to aid the experimental work in the development of nuclear fuels.

Garcés, Jorge Eduardo↗

Calibration of calorimetric measurement in a liquid argon time projection chamber

The liquid argon time projection chamber provides high-resolution event images and excellent calorimetric resolution for studying neutrino physics and searching for beyond-standard-model physics. In this article, we review the main physics processes that affect detector response, including the electronics and field responses, space charge effects, electron attachment to impurities, diffusion, and recombination. We describe methods to measure those effects, which are used to calibrate the detector response and convert the measured raw analog-to-digital converter (ADC) counts into the original energy deposition.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Application of computational fluid dynamics to complex inlet ducts

A three-dimensional parabolic Navier-Stokes code, PEPSIG, was used to analyze the flow in the subsonic diffuser section of a typical modern inlet design. The effect of curvature of the diffuser centerline and transitioning cross sections was studied to determine the primary cause of flow distortion in the duct. Total pressure values at the engine compressor face are reported.

Towne, C. E.↗

Application of computational fluid dynamics to complex inlet ducts

A three-dimensional parabolic Navier-Stokes code, PEPSIG, was used to analyze the flow in the subsonic diffuser section of a typical modern inlet design. The effect of curvature of the diffuser centerline and transitioning cross sections was studied to determine the primary cause of flow distortion in the duct. Total pressure values at the engine compressor face are reported.

Towne, C. E.↗

Impact of carbonation on leaching of constituents from a cementitious waste form for treatment of low activity waste at the DOE Hanford site

Carbonation can be a major aging process during disposal of alkaline cementitious waste forms and can impact constituent leaching by changes in material alkalinity, pore structure, and controlling mineral phases. The effect of carbonation on the leaching of major and trace constituents from Cast Stone, a cementitious waste form developed to treat high salt content low activity waste, was studied through a combination of leaching experiments and reactive transport simulations. Diffusive transport of constituents in the waste form was evaluated using reactive transport modeling of diffusion-controlled leaching test results and a geochemical speciation model derived from pH-dependent leaching. Comparisons between Cast Stone materials aged under nitrogen, air, and 2% carbon dioxide in nitrogen showed that carbonation impacts solubility, physical retention and observed diffusivity of major and trace constituents. Carbonation under 2% CO 2 decreased the diffusion-controlled leaching of chromium by two orders of magnitude. Finally, modeling results suggest that carbonation may also decrease solubility of technetium while changes to microstructure by carbonation increases effective diffusivity of constituents in Cast Stone.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Generation of magnetic structures on the solar photosphere

The lower solar atmosphere is a partially ionized plasma consisting of electrons, ions, and neutral atoms. In this, which is essentially a three-fluid system, the Hall effect arises from the treatment of the electrons and ions as two separate fluids and the ambipolar diffusion arises from the inclusion of neutrals as the third fluid. The Hall effect and ambipolar diffusion have been shown to be operational in a region beginning from near the photosphere up to the chromosphere. In a partially ionized plasma, the magnetic induction is subjected to ambipolar diffusion and the Hall drift in addition to the usual resistive dissipation. These nonlinear effects create sharp magnetic structures which then submit themselves to various relaxation mechanisms. A first-principles derivation of these effects in a three-fluid system and an analytic solution to the magnetic induction equation in a stationary state are presented, which in the general case includes the Hall effect, ambipolar diffusion, and ohmic dissipation. The temporal evolution of the magnetic field is then investigated under the combined as well as the individual effects of the Hall drift and ambipolar diffusion to demonstrate the formation of steep magnetic structures and the resultant current sheet formation. These structures have just the right features for the release of magnetic energy into the solar atmosphere.

79 ASTRONOMY AND ASTROPHYSICS↗

The Effect of Velocity on the Extinction Behavior of a Diffusion Flame during Transient Depressurization

Current fire suppression plans for the International Space Station include the use of venting (depressurization) as a method for extinguishing a fire. Until recently this process had only been examined as part of a material flammability experiment performed on Skylab in the early 1970's. Due to the low initial pressure (0.35 Atm) and high oxygen concentration (65%), the Skylab experimental results are not applicable for understanding the effects of venting on a fire in a space station environment (21%O2, 1 Atm). Recent research examined the extinction behavior of a diffusion flame over a polymethyl methacrylate (PMMA) cylinder during a transient depressurization in low-gravity. The numerical model was used to examine extinction limits as a function of depressurization rate, forced flow velocity, and initial solid phase temperature. The experimental and numerically predicted extinction data indicated that as the solid phase temperature increased the pressure required to extinguish the flame decreased. The numerical model was also used to examine conditions not obtainable in the low-gravity experiments. From these simulations, a series of extinction boundaries were generated that showed a region of increased flammability existed at a forced flow of 10 cm/s. Analysis of these extinction boundaries indicated that they were quasi-steady in nature, and that the final extinction conditions were independent of the transient process. The velocity range in the previous study was limited and thus the results did not examine the effects of velocities less than 1 cm/s or greater than 20 cm/s. This study utilized low-gravity experiments performed on NASA's Reduced-gravity Research Aircraft Laboratory and numerical simulations to examine conditions applicable to the Space Station environment. This paper extends the analysis of the previous study to a comprehensive examination of the effect of increased velocity on extinction behavior and extinction limits during a transient depressurization in low-gravity. This is achieved by examining extinction data from buoyant (normal-gravity) and low-buoyant (low-gravity) depressurization. experiments, as well as from numerical predictions of flame behavior during depressurization in a non-buoyant (zero-gravity) environment.

Goldmeer, Jeffrey S.↗

Effects of thermal-solutal convection on temperature and solutal fields under various gravitational orientations

Semiconductor crystals such as Hg(1-x)CD(x)Te grown by unidirectional solidification Bridgmann method have shown compositional segregations in both the axial and radial directions. Due to the wide separation between the liquidus and the solidus of its pseudobinary phase diagram, there is a diffusion layer of higher HgTe content built up in the melt near the melt-solid interface which gives a solute concentration gradient in the axial direction. The value of effective diffusion coefficient calculated from fitting of the data to 1D model varies with Hg(1-x)Cd(x)Te growth conditions. This indicates that the growth condition of the Hg(1-x)Cd(x)Te is not purely diffusion controlled. Because of the higher thermal conductivity in the melt than that in the crystal in the growth system, there is a thermal leakage through the fused silica crucible wall near the melt-solid interface. This gives a thermal gradient in the radial direction. Hart, and Thorpe, Hutt and Soulsby have shown that under such conditon a fluid will become convectively unstable as a result of different diffusitivities of temperature and solute. It is quite important to understand the effects of this thermosolute convection on the compositonal segregation in both axial and radial directions in the unidirectionally solidified crystals under various gravitational directions. To reach this goal, we start with a simplified problem to study the effects of thermal-solutal convection on the temperature and solutal fields under various gravitional orientations. We begin by reviewing model governing equations.

Wang, Jai-Ching↗

Short Range Order in Disordered Spinel and the Impact on Cation Vacancy Transport

Spinels are important complex oxides for use in radiation damage environments and resulting from the corrosion of steels. It is known that, in these environments, normal spinels exist with some concentration of antisite cation pairs known as inversion. In this work we show that even in highly disordered states characterized by high levels of inversion, spinel still shows some short range order (SRO) that manifests itself in antisite chains. The propensity to form these antisite chains is confirmed through Monte Carlo simulations which find that the length of chains which can form depend on the spinel chemistry. We also consider the effect of antisite chains on the diffusivity of cation vacancies and find the effect strongly depends on the spinel chemistry. At the extremes, chains in FeCr2O4 significantly increase vacancy transport but in MgAl2O4 chains have the inverse effect of drastically reducing vacancy mobility. The explanation of these dramatically different effects results from the assessment of the thermodynamic stability of the antisite chains and contrasting attractive/repulsive interactions of vacancies with the chains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pore-scale prediction of transport properties in reconstructed nanostructures of organic matter in shales

Size, morphology and distributions of pores in organic matter of shale matrix are discussed based on high resolution images from experiments in the literature. 250 nanoscale structures of the organic matter are then reconstructed by randomly placing pore spheres with different diameters and overlap tolerances. Effects of porosity, the mean diameter and the overlap tolerance on void space connectivity and pore size distribution are studied. Furthermore, a pore-scale model based on the lattice Boltzmann method developed in a previous study is used to predict the Knudsen diffusivity and permeability of the reconstructed organic matter. The simulation results show that the mean pore diameter and overlap tolerance significantly affect the transport properties. The predicted Knudsen effective diffusivity is compared with Bruggeman equation and it is found that this equation underestimates the tortuosity. A modified Bruggeman equation is proposed based on the simulation results. The predicted intrinsic permeability is in acceptable agreement with Kozeny–Carman (KC) equation. In addition, the apparent permeability is determined based on Knudsen diffusivity and intrinsic permeability predicted. The apparent permeability is compared with that obtained with various correlations in the literature. Lastly, Knudsen’s correlations match best with our numerical results and are recommended for calculating the apparent permeability.

04 OIL SHALES AND TAR SANDS↗

Multiscale simulation of xenon diffusion and grain boundary segregation in UO₂

In light water reactor fuel, gaseous fission products segregate to grain boundaries, resulting in the nucleation and growth of large intergranular fission gas bubbles. The segregation rate is controlled by diffusion of fission gas atoms through the grains and interaction with the boundaries. Based on the mechanisms established from earlier density functional theory (DFT) and empirical potential calculations, diffusion models for xenon (Xe), uranium (U) vacancies and U interstitials in UO₂ have been derived for both intrinsic (no irradiation) and irradiation conditions. Segregation of Xe to grain boundaries is described by combining the bulk diffusion model with a model for the interaction between Xe atoms and three different grain boundaries in UO₂ (Σ5 tilt, Σ5 twist and a high angle random boundary), as derived from atomistic calculations. The present model does not attempt to capture nucleation or growth of fission gas bubbles at the grain boundaries. The point defect and Xe diffusion and segregation models are implemented in the MARMOT phase field code, which is used to calculate effective Xe and U diffusivities as well as to simulate Xe redistribution for a few simple microstructures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Influence of Effective Physical Contact Area on Microstructure and Mechanical Properties of Diffusion-Bonded TC4/1060Al Joints

In the present study, dissimilar TC4 alloy and 1060Al alloy were successfully diffusion-bonded at a very low temperature about 410 °C by improving the effective physical contact area. A sound joint with a crack-free interface and a high shear strength (128 MPa) is obtained with a combination of TC4 surface roughness of 109.90 μm (S{sub a}) and 1060Al surface roughness of 101.43 μm (S{sub a}), and customized parallel surface scratches. Under this condition, the two parent metals share the largest contact area during the physical contact stage of diffusion bonding process, which is consistent with the theoretical calculation. The results show that no Ti-Al binary intermetallic compounds are observed at the interface of the joints. The maximum shear strength of the joint reaches 128 MPa with optimized bonding parameters (410 °C for 120 min with a pressure of 20 MPa), which is higher than the shear strength of 1060Al (80 MPa) base metal. The fractography analysis indicates the joints failed with a ductile fracture at the 1060Al side.

36 MATERIALS SCIENCE↗

Structure and Stability of Burke-Schumann Diffusion Flames

The general goal of this NASA Grant is twofold: to improve our understanding of (1) the influence of buoyancy on the stability and structure of Burke-Schumann type diffusion flames, and (2) the effects of buoyancy on vortex-flame interactions in co-flow diffusion flames. A numerical code with a higher order accuracy for spatial discretization is developed in this project for simulation of time-dependent diffusion flames by Sheu and Sheu and Chen, and an extended reduced mechanism is incorporated for prediction of methane oxidation and NO(x)(NO, NO2, and N2O) formation and emission from methane Burke-Schumann diffusion flame (BSDF) as reported in Sheu, and Sheu and Chen. Initial investigation of vortex and flame interaction within the context of fast chemistry is reported. Experiments are conducted in reduced pressure to study the lift-off and stabilization of methane-fueled BSDF in reduced buoyancy environments due to reduced pressure. Measurements of temperature and species concentrations are made in normal and reduced pressure environments to study the effects of buoyancy on the structure of BSDF, and will be reported in this paper. To study the buoyancy effects on the lift-off and stabilization of methane-fueled jet diffusion flames in coflowing air, a glovebox investigation, Enclosed Laminar Flames (ELF), has been proposed and approved for space-based testing on the fourth United States Microgravity Payload (USMP-4) mission, scheduled for October 1997. A brief description of the ELF investigation is also presented.

Lee, Yong G.↗

Effects of concentration-dependent elastic modulus on Li-ions diffusion and diffusion-induced stresses in spherical composition-gradient electrodes

The composition-gradient electrode material is considered as one of the most promising materials for lithium-ion batteries because of its excellent electrochemical performance and thermal stability. In this work, the effects of concentration-dependent elastic modulus on Li-ions diffusion and diffusion-induce stress in the composition-gradient electrodes were studied. The coupling equations of elasticity and diffusion under both potentiostatic charging and galvanostatic charging were developed to obtain the distributions of both the Li-ions concentration and the stress. The results indicated that the effects of the concentration-dependent elastic modulus on the Li-ions diffusion and the diffusion-induce stresses are controlled by the lithiation induced stiffening factor in the composition-gradient electrodes: a low stiffening factor at the center and a high stiffening factor at the surface lead to a significant effect, whereas a high stiffening factor at the center and a low stiffening factor at the surface result in a minimal effect. The results in this work provide guidance for the selection of electrode materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Steady spherical hypercritical accretion onto neutron stars

The present study of hypercritical accretion flows onto neutron stars considers steady-state, spherically symmetric flows whose accretion rate range is characterized by the carrying away of gravitational-accretion energy by neutrinos. The models used encompass pair production, radiation diffusion, and general relativistic effects. While pair pressure dominates throughout the accretion envelope when accretion rates above about 100 solar masses/yr, radiation diffusion becomes important when the accretion rate falls below about 0.001 solar masses/yr. At the lower accretion rates, free fall toward the neutron-star surface stops and an extended, quasi-static, radiation pressure-supported envelope emerges which is probably dynamically unstable.

Houck, John C.↗