Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Computer experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Experimental Study of Supercooled Large Droplet Impingement Effects

Typically, ice accretion results from small supercooled droplets (droplets cooled below freezing), usually 5 to 50 microns in diameter, which can freeze upon impact with an aircraft surface. Recently, ice accretions resulting from supercooled large droplet (SLD) conditions have become a safety concern. Current ice accretion codes have been extensively tested for Title 14 Code of Federal Regulations Part 25, Appendix C icing conditions but have not been validated for SLD icing conditions. This report presents experimental methods for investigating large droplet impingement dynamics and for obtaining small and large water droplet impingement data.

ICE ACCRETION CODE↗

Intelligent Rover Execution for Detecting Life in the Atacama Desert

On-board supervisory execution is crucial for the deployment of more capable and autonomous remote explorers. Planetary science is considering robotic explorers operating for long periods of time without ground supervision while interacting with a changing and often hostile environment. Effective and robust operations require on-board supervisory control with a high level of awareness of the principles of functioning of the environment and of the numerous internal subsystems that need to be coordinated. We describe an on-board rover executive that was deployed on a rover as past of the "Limits of Life in the Atacama Desert (LITA)" field campaign sponsored by the NASA ASTEP program. The executive was built using the Intelligent Distributed Execution Architecture (IDEA), an execution framework that uses model-based and plan-based supervisory control of its fundamental computational paradigm. We present the results of the third field experiment conducted in the Atacama desert (Chile) in August - October 2005.

Baskaran, Vijayakumar↗

Computational Assessment of the Benefits of Boundary Layer Ingestion for the D8 Aircraft

To substantially reduce the fuel burn of future commercial transportation aircraft, the boundary layer ingestion idea is investigated. The idea is that an engine placed in the wake of the aircraft it is propelling is more efficient than a conventional engine placement under the wing or on pods mounted to the rear of the fuselage. The top, rear of the fuselage is thus designed to act as a diffuser such that the engines can be placed there with a minimal nacelle. The boundary layer thickens over the rear of the fuselage such that a large portion of it is ingested by the fan. To assess whether the boundary layer ingesting (BLI) engine placement is indeed advantageous, a study of the nacelle aerodynamics is carried out using Overflow, a viscous CFD flow solver that uses overset meshes. The computed forces and moments are compared to a wind tunnel experiment for validation. Some aspects of the design are verified using the simulation results. Finally, the effect of the nacelle placement is assessed by comparing the BLI nacelle configuration to a podded nacelle configuration and to the unpowered (without nacelles) aircraft.

aircraft↗

Towards Co-evolution of Membrane Transport and Metabolism

Protocellular boundaries were inextricably connected to the metabolism they encapsulated: to be inheritable, early metabolism must have led to an increased rate of growth and division of vesicles and, similarly, transport through vesicle boundaries must have supported the evolution of metabolism. Even though explaining how this coupling emerged and evolved in the absence of the complex machinery of modern cells is one of the key issues in studies on the origin of life, little is known about the biochemical and biophysical processes that might have been involved. This gap in our knowledge is a major impediment in efforts to construct scenarios for the origin of life and laboratory models of protocells. A combination of experimental and computational studies carried out by us and our collaborators is aimed at helping to close this gap. Properties of membranes might have contributed to the selection of RNA as an early biopolymer. A kinetic mechanism was proposed (Sacerdote & Szostak, 2005) in which ribose was supplied more quickly than other aldopentoses to primordial cells for preferential incorporation of ribonucleotides into nucleic acids. This proposal is based on a finding that ribose permeates membranes an order of magnitude faster than its diastereomers, arabinose and xylose. Our computer simulations, which yield permeation rates in excellent agreement with experiment, and kinetic modeling explain this phenomenon in terms of inter- and intramolecular interactions involving exocyclic hydroxyl groups attached to carbon atoms of the pyranose ring (Wei and Pohorille, 2009). They also constrain scenarios for the formation of the earliest nucleic acids (Wei and Pohorille, 2013). In one scenario, sugars permeate protocellular walls and subsequently are used to synthesize nucleic acids inside protocells. As long as this process proceeds at the rate faster than 6x10(exp -3)/s, ribose derivatives will be available for synthesis easier than their diastereomers. If nucleosides or their activated derivatives are synthesized outside protocells and subsequently transported across protocellular membranes the kinetic mechanism does not apply because all diastereomers, which have their sugars in the furanose rather than pyranose form, permeate the membrane at approximately the same rate. Properties of membranes might have been also coupled to metabolism involving peptides. Recently, Adamala and Szostak (2013) have shown that a dipeptide inside fatty-acid vesicles catalyzes the formation of another dipeptide that binds to vesicle walls and, by doing so, promotes their growth at the expense of other vesicles. This coupling of metabolism, permeability of vesicles and their growth is the first demonstration of evolutionary advantage imparted by small, membrane-bound peptides. Building on this work we have calculated the rate at which different blocked amino acids are delivered to a protocell for synthesis of dipeptides. We have further shown that the dipeptides are located at the water-membrane interface rather than in the center of the bilayer. On these basis it is anticipated that other dipeptides containing aromatic, but not necessarily hydrophobic amino acids (e.g. tyrosine) could have the same catalytic effects. Insight from these studies allows for estimating the rate of vesicle growth and the rates of dipeptide synthesis required to keep the system in balance. These results, in combination with our earlier studies, lead to a general scenario for evolution from membrane-bound dipeptides to ion channels in the origin of life.

Metabolism↗

TPSAS-NF1676L-18345-DND

Introduction: Our novel high pressure, high temperature synthesis method produces white, highly crystalline, small diameter, long BNNTs without any catalyst. The quality of BNNTs will be optimized by understanding the nucleation and growth mechanism of BNNT through coherent computational modeling and in-situ and ex-situ experiments. Both BNNT production and science rigs operational. Goals and Objectives: Produce high quality, large quantity BNNTs and BNNT fibers for use as reinforcements for polymer, ceramic, and metallic matrices and assess the scale-ability of existing synthesis methods for large scale production of these reinforcements. Deliverable: High quality optimized BNNT synthesis method and systematic property database of BNNT composites. Fabrication and analysis of non-woven mats, fibers, yarns and composites to evaluate their structural and functional properties.

Catharine C Fay↗

A GNSS Receiver for Small-Sats Enabling Precision POD, Radio Occultations and Reflections

A low cost, low power, and low mass GNSS receiver (called Cion) has been developed and is currently flying on the CICERO cubesats. The receiver was designed in less than a year by JPL for Tyvak and GeoOptics for use in the GeoOptics CICERO constellation and leverages 25 years of JPL GNSS reciever design experience. Cion uses a commercial off-the-shelf (COTS) computer along with existing space qualified RF down-converters, software, and firmware to produce atmospheric Radio Occultation (RO) data. By combining a FPGA with dual core ARM processor and an embedded system controller, the Xilinx Zynq processor is an enabling technology that provides a customizable digital signal processing platform integrated into the computer (System on a chip) and enables off-the-shelf hardware to become the main engine behind this software defined radio. Using Linux for the on-board computer allows for fast development times and liberal use of existing open source software libraries. The parts of the receiver that require realtime implementation are performed in the Field Programmable Gate Array (FPGA), which can also be reprogrammed in flight. While the Zynq is not rad hard, the silicon on insulator (SOI) technology is rad tolerant ‘by accident’, allowing for its use in many space-based applications. Early results show that the Cion is working as designed, has demonstrated the first known GLONASS occultations, and obtains high quality atmospheric profiles with excellent lower troposphere penetration (near Earth’s surface).

Young, Larry↗

Mars Sample Return Earth Entry System Woven Roughness Mach 6 Aeroheating Test

The Mars Sample Return Earth Entry System is the first entry vehicle designed for a NASA flagship mission to utilize a woven thermal protection system as well as a 52.5 degree sphere cone forebody geometry. As a result, no heritage aeroheating experimental data set exists to compare with computational predictions. In order to obtain a set of validation data for computational models, an extensive wind tunnel test campaign was funded by the Mars Sample Return Earth Entry System project. The first entry in the test campaign was completed in April of 2023, which was an investigation of turbulent heating augmentation due to woven thermal protection system roughness on the 52.5 degree Mars Sample Return - Earth Entry System vehicle forebody geometry. This test entry produced the first ever experimental aeroheating data on a 52.5 degree sphere-cone geometry as well as the first NASA experimental aeroheating data on a woven surface roughness pattern. Data obtained from this test campaign is being directly leveraged to support the NASA flight program, as experimental results are being utilized to validate the computational models which characterize the aeroheating environment that the vehicle experiences and predict turbulent surface heating levels and margins across the woven surface.

Jonathan S Cheatwood↗

Mars Sample Return Earth Entry System Woven Roughness Mach 6 Aeroheating Test

The Mars Sample Return Earth Entry System is the first entry vehicle designed for a NASA flagship mission to utilize a woven thermal protection system as well as a 52.5 degree sphere cone forebody geometry. As a result, no heritage aeroheating experimental data set exists to compare with computational predictions. In order to obtain a set of validation data for computational models, an extensive wind tunnel test campaign was funded by the Mars Sample Return Earth Entry System project. The first entry in the test campaign was completed in April of 2023, which was an investigation of turbulent heating augmentation due to woven thermal protection system roughness on the 52.5 degree Mars Sample Return - Earth Entry System vehicle forebody geometry. This test entry produced the first ever experimental aeroheating data on a 52.5 deg sphere-cone geometry as well as the first NASA experimental aeroheating data on a woven surface roughness pattern. Data obtained from this test campaign is being directly leveraged to support the NASA flight program, as experimental results are being utilized to validate the computational models which characterize the aeroheating environment that the vehicle experiences and predict turbulent surface heating levels and margins across the woven surface.

Jonathan Cheatwood↗

Putting the 'super' in supercomputers

Computers used for numerical simulations of physical phenomena, e.g., flowfields, meteorology, structural analysis, etc., replace physical experiments that are too expensive or impossible to perform. The problems considered continually become increasingly more complex and thus demand faster processing times to do all necessary computations. The effects components technologies have on computer speed are leveling off, leaving new architectures and programming as the only currently viable means to upgrade speed. Parallel computations, either in the form of array processors, assembly line processing or multiprocessors are being explored using existing microprocessor technologies. Slower hardware configurations can also be made equivalent to faster supercomputers by economic programming. The availability of rudimentary parallel architecture supercomputers for general industrial use is increasing. Scientific applications continue to drive the development of more sophisticated parallel machines.

Schulbach, C.↗

Flow studies in close-coupled ventral nozzles for STOVL aircraft

Flow in a generic ventral nozzle system was studied experimentally and analytically with the PARC3D computational fluid dynamics program (a full Navier-Stokes equations solver) in order to evaluate the program's ability to predict system performance and internal flow patterns. A generic model of a tailpipe with a rectangular ventral nozzle, about one-third of full size, was tested with unheated air at steady-state pressure ratios up to 4.0. Measurements showed about 5.5 percent flow-turning loss and reasonable nozzle performance coefficients. The flow turned more than the designed 90 deg, causing an aftward axial component in the total thrust. Flow behavior into and through the ventral duct is discussed and illustrated with paint streak flow visualization photographs. PARC3D graphic images are shown for comparison with the experiment photographs. The program successfully predicted internal flow patterns; it also computed thrust and discharge coefficients within 1 percent of measured values.

Mcardle, Jack G.↗

Time-accurate Navier-Stokes computations of self-excited two-dimensional unsteady cavity flows

Time-accurate Navier Stokes computations were performed to study self-excited oscillatory shear layer behavior over a two-dimensional rectangular cavity and to gain insight into the vortex-acoustic coupling that sustains these oscillations. Results were obtained solving the full, unsteady compressible Navier-Stokes equations for Reynolds-averaged turbulent air flow past a cavity with L/d = 2. Conditions duplicated test conditions in experiments by Rossiter at Mach numbers varied from 0.6 to 1.2. The computational scheme was the USA 2D series code developed by Rockwell's Science Center with an algebraic turbulence model for the shear layer and recirculating region. Two physical conditions were simulated: an isolated cavity situated (1) in an infinite plane wall and (2) in an infinite channel with an opposing parallel wall. Computed results for (1) showed excellent agreement with Rossiter's measured amplitudes and frequencies. A tuned acoustic duct resonance effect was observed in (2), demonstrating a controlled change in the acoustic feedback mechanism and resultant amplification in computed oscillations.

Dougherty, N. Sam↗

Flying Quality Analysis of a JAS 39 Gripen Ministick Controller in an F/A-18 Aircraft

NASA Dryden conducted a handling qualities experiment using a small displacement centerstick controller that Saab-Scania developed for the JAS 39 Gripen aircraft. The centerstick, or ministick, was mounted in the rear cockpit of an F/A-18 aircraft. Production support flight control computers (PSFCC) provided a pilot-selectable research control system. The objectives for this experiment included determining whether the mechanical characteristics of the centerstick controller had any significant effect on the handling qualities of the F/A-18, and determining the usefulness of the PSFCCs for this kind of experiment. Five pilots evaluated closed-loop tracking tasks, including echelon and column formation flight and target following. Cooper-Harper ratings and pilot comments were collected for each maneuver. This paper describes the test system, including the PSFCCs, the Gripen centerstick, and the flight test experiment. The paper presents results of longitudinal handling qualities maneuvers, including low order equivalent systems, Neal-Smith, and controls anticipation parameter analyses. The experiment showed that, while the centerstick controller provided a different aircraft feel, few handling qualities deficiencies resulted. It also demonstrated that the PSFCCs were useful for this kind of investigation.

Carter, John F.↗

Construction of surface pressure field from scatterometer wind field

An account of the construction of surface pressure fields from Seasat-A satellite scatterometer (SASS) winds as carried out by different methods, and the comparison of these pressure fields with those derived from in situ ship observations is presented. On the assumption that the pressure adjusts itself instantaneously to the motion field, it may be computed by various methods. One of these makes use of planetary boundary theory, and of the possible techniques in this category a two-layer iterative scheme admitting of the parametrization of diabatic and baroclinic effects and of secondary flow was chosen. A second method involves the assumption of zero two-dimensional divergence, leading to a Laplace's equation (the balance equation) in pressure, with the wind field serving as a forcing function. This method does not accommodate adiabatic or baroclinic effects, and requires a knowledge of the pressure at all boundary points. Two comparison fields are used for validation: the conventional operational analyses of the US National Meteorological Center (NMC), and the special analyses of the Gulf of Alaska Experiment (GOASEX), which were done by hand. The results of the computations were as follows: (1) The pressure fields, as computed from the SASS winds alone, closely approximated the NMC fields in regions where reasonable in situ coverage was available (typically, one or two mb differences over most of the chart, three to four mb in extreme cases); (2) In some cases the SASS-derived pressure fields displayed high-resolution phenomena not detected by the NMC fields, but evident in the GOASEX data; and, (3) As expected, the pressure fields derived from the balance equation were much smoother and less well resolved than the SASS-derived or NMC fields. The divergence as measured from the SASS winds is smaller than, but of the same order of magnitude as, the vorticity.

Wurtele, Morton G.↗

"Hypothetical" Heavy Particles Dynamics in LES of Turbulent Dispersed Two-Phase Channel Flow

The extensive experimental study of dispersed two-phase turbulent flow in a vertical channel has been performed in Eaton's research group in the Mechanical Engineering Department at Stanford University. In Wang & Squires (1996), this study motivated the validation of LES approach with Lagrangian tracking of round particles governed by drag forces. While the computed velocity of the flow have been predicted relatively well, the computed particle velocity differed strongly from the measured one. Using Monte Carlo simulation of inter-particle collisions, the computation of Yamamoto et al. (2001) was specifically performed to model Eaton's experiment. The results of Yamamoto et al. (2001) improved the particle velocity distribution. At the same time, Vance & Squires (2002) mentioned that the stochastic simualtion of inter-particle collisions is too expensive, requiring significantly more CPU resources than one needs for the gas flow computation. Therefore, the need comes to account for the inter-particle collisions in a simpler and still effective way. To present such a model in the framework of LES/Lagrangian particle approach, and to compare the calculated results with Eaton's measurement and modeling of Yamamoto is the main objective of the present paper.

Gorokhovski, M.↗

Design and development experience with a digital fly-by-wire control system in an F-8C airplane

To assess the feasibility of a digital fly-by-wire system, the mechanical flight control system of an F-8C airplane was replaced with a digital system and an analog backup system. The Apollo computer was used as the heart of the primary system. This paper discusses the experience gained during the design and development of the system and relates it to active control systems that are anticipated for future civil transport applications.

Deets, D. A.↗

Design and development experience with a digital fly-by-wire control system in an F-8C airplane

To assess the feasibility of a digital fly by wire system, the mechanical flight control system of an F-8C airplane was replaced with a digital primary system and an analog backup system. The Apollo computer was used as the heart of the primary system. This paper discusses the experience gained during the design and development of the system and relates it to active control systems that are anticipated for future civil transport applications.

Deets, D. A.↗

An improved computational technique for calculating electromagnetic forces and power absorptions generated in spherical and deformed body in levitation melting devices

An improved computational technique for calculating the electromagnetic force field, the power absorption and the deformation of an electromagnetically levitated metal sample is described. The technique is based on the volume integral method, but represents a substantial refinement; the coordinate transformation employed allows the efficient treatment of a broad class of rotationally symmetrical bodies. Computed results are presented to represent the behavior of levitation melted metal samples in a multi-coil, multi-frequency levitation unit to be used in microgravity experiments. The theoretical predictions are compared with both analytical solutions and with the results of previous computational efforts for the spherical samples and the agreement has been very good. The treatment of problems involving deformed surfaces and actually predicting the deformed shape of the specimens breaks new ground and should be the major usefulness of the proposed method.

Zong, Jin-Ho↗

An Improved Computational Technique for Calculating Electromagnetic Forces and Power Absorptions Generated in Spherical and Deformed Body in Levitation Melting Devices

An improved computational technique for calculating the electromagnetic force field, the power absorption and the deformation of an electromagnetically levitated metal sample is described. The technique is based on the volume integral method, but represents a substantial refinement; the coordinate transformation employed allows the efficient treatment of a broad class of rotationally symmetrical bodies. Computed results are presented to represent the behavior of levitation melted metal samples in a multi-coil, multi-frequency levitation unit to be used in microgravity experiments. The theoretical predictions are compared with both analytical solutions and with the results or previous computational efforts for the spherical samples and the agreement has been very good. The treatment of problems involving deformed surfaces and actually predicting the deformed shape of the specimens breaks new ground and should be the major usefulness of the proposed method.

Zong, Jin-Ho↗