Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COLLECTIVE MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Recent Improvements and Verification of A Full Body Model in Opensim

BACKGROUND: The dynamic feasibility [1,2] criterion, that the subject’s Center of Pressure (COP) be located within the Base of Support (BOS) which outlines the feet, has aided in assessing the stability of human motion recorded on earth while performing the recorded tasks in lunar gravity or as countermeasures exercises on a vibration isolation and stabilization system in microgravity. The convex hull of the BOS on the platform under the subject’s feet was estimated using virtual markers on the feet of the scaled subject model. The COP was calculated using the ground reaction forces and moments determined from motion capture data with biomechanical modeling tools [3]. Occasionally, large-amplitude oscillatory spikes or “artifacts” were observed in the subject’s linear and angular momentum derivatives, affecting some COP data derived from motion capture. The purpose of this investigation was to assess and improve the accuracy of model scaling and BOS estimation as well as to determine the efficacy of model adjustments in mitigating artifacts influencing motion capture-derived ground reaction force and COP results. METHODS: To aid evaluation of proposed process and model updates, motion capture data were collected for two subjects during unit test and range of motion trials, lunar tasks, and countermeasures exercise motions. Markers were added to the full body Plug-in Gait marker set [4] during data collection. New markers were placed on the front, back, sides, and top of the head to improve scaling using distances between marker pairs. Medial elbow markers were added to stabilize the upper arm during OpenSim Inverse Kinematics (IK) [5]. Finally, markers were added on the outer edge of the heels and on the outside edges of the first and last toes on each foot. These additional foot markers were made available to test new automated foot scaling techniques and to calculate the error between the subject’s estimated and recorded BOS. The modified unscaled OpenSim Full Body Rajagopal Model [6,7] was adjusted using some previously investigated techniques [8] to mitigate rapid shifts in joint angles occurring during IK, as these were found to cause the spike artifacts observed in subsequent stages of analysis. Since OpenSim models use Euler angles and rotation sequences, the arm axes of rotation were adjusted, and the pelvis order of rotation was changed to minimize the likelihood of encountering “gimbal lock” during common human motion. The model clavicle, arm, elbow, wrist, pelvis, and ankle angle limits were adjusted to better accommodate the full human range of motion seen in exercise and lunar data. The shoulder joint center was calculated using a “pivoting” algorithm [9], and both shoulder joint center and upper arm markers were included during IK to provide additional shoulder stability on a case-by-case basis. The quality of IK results was assessed by three criteria: minimizing error between recorded motion capture markers and model markers, checking for reasonable rates of change in joint angles between fames (i.e., no IK artifacts), and ensuring the absence of spikes in the inertial forces and angular momentum derivatives calculated using a custom OpenSim plugin [10]. RESULTS: The additional markers placed on the subject during data collection allowed the head and feet to be scaled more accurately using distances between new marker pairs. Scaling with BOS markers placed on the subject and removing the limit on subtalar angle resulted in more accurate BOS determination. Unrealistically large changes in joint angles between frames could be reduced by including clavicle, sternum, and medial elbow markers during IK. In cases with large arm ranges of motion, results could be further improved by running IK using medial elbow and virtual shoulder joint center markers. Model adjustments significantly improved the IK results affecting COP calculation and increased the accuracy of BOS estimation.

C A Bell↗

Multiscale Physics of Atomic Nuclei from First Principles

Atomic nuclei exhibit multiple energy scales ranging from hundreds of MeV in binding energies to fractions of an MeV for low-lying collective excitations. As the limits of nuclear binding are approached near the neutron and proton drip lines, traditional shell structure starts to melt with an onset of deformation and an emergence of coexisting shapes. It is a long-standing challenge to describe this multiscale physics starting from nuclear forces with roots in quantum chromodynamics. Here, we achieve this within a unified and nonperturbative quantum many-body framework that captures both short- and long-range correlations starting from modern nucleon-nucleon and three-nucleon forces from chiral effective field theory. The short-range (dynamic) correlations which account for the bulk of the binding energy are included within a symmetry-breaking framework, while long-range (static) correlations (and fine details about the collective structure) are included by employing symmetry projection techniques. Our calculations accurately reproduce—within theoretical error bars—available experimental data for low-lying collective states and the electromagnetic quadrupole transitions in 20−30 Ne. In addition, we reveal coexisting spherical and deformed shapes in 30 Ne, which indicates the breakdown of the magic neutron number 𝑁 = 20 as the key nucleus 28 O is approached, and we predict that the drip line nuclei 32,34 Ne are strongly deformed and collective. By developing reduced-order models for symmetry-projected states, we perform a global sensitivity analysis and find that the subleading singlet 𝑆-wave contact and a pion-nucleon coupling strongly impact nuclear deformation in chiral effective field theory. The techniques developed in this work clarify how microscopic nuclear forces generate the multiscale physics of nuclei spanning collective phenomena as well as short-range correlations and allow one to capture emergent and dynamical phenomena in finite fermion systems such as atom clusters, molecules, and atomic nuclei.

74 ATOMIC AND MOLECULAR PHYSICS↗

Summary of Biomass Scale Cubical Triaxial Tester Results

Hoppers are widely used biomass handling devices that channel bulk biomass from storage to subsequent handling equipment. Jenike’s longstanding approach, based on the Mohr-Coulomb model, has been successfully used to design hoppers handling cohesionless granular materials such as grains and other agricultural produces. However, designing a hopper to ensure reliable non-grain biomass flow is found to be challenging due to cohesion, irregular particle shape, and bulk material elastoplasticity. Forest Concepts developed a Cubical Triaxial Tester (CTT) to collect data necessary to determine constitutive model coefficients appropriate for particulate biomass materials. Over the course of three years, including hundreds of data sets with a focus on low-pressure ranges relevant to gravity hopper flow of biomass feedstocks, the Forest Concepts’ CTT has proven to be a reliable method to generate data that is otherwise difficult to obtain. Coefficients for three widely used constitutive material models, i.e., Mohr-Coulomb model, modified Cam-Clay model, and Drucker-Prager/Cap model, are reported. This work was supported in part by the US Department of Energy under contract DE-EE0008254.

09 BIOMASS FUELS↗

Hierarchical computation in the SPMD programming model

Large-scale parallel machines are programmed mainly with the single program, multiple data (SPMD) model of parallelism. While this model has advantages of scalability and simplicity, it does not fit well with divide-and-conquer parallelism or hierarchical machines that mix shared and distributed memory. In this paper, we define the recursive single program, multiple data model (RSPMD) that extends SPMD with a hierarchical team mechanism to support hierarchical algorithms and machines. We implement this model in the Titanium language and describe how to eliminate a class of deadlocks by ensuring alignment of collective operations. We present application case studies evaluating the RSPMD model, showing that it enables divide-and-conquer algorithms such as sorting to be elegantly expressed and that team collective operations increase performance of conjugate gradient by up to a factor of two. The model also facilitates optimizations for hierarchical machines, improving scalability of particle in cell by 8x and performance of sorting and a stencil code by up to 40% and 14%, respectively.

Kamil, A↗

Update of Erosion Conditions and Assessment of Mitigation Options for the L-Bar Site

The L-Bar former uranium milling site was remediated and closed per regulations and is now under the long-term stewardship of the U.S. Department of Energy, Office of Legacy Management (DOE/LM). Since assuming stewardship in 2004, DOE/LM has observed erosion and sedimentation processes at the L-Bar Site that will challenge meeting the design closure criteria in the long term, and therefore erosion control structures were installed in several areas. Portions of these structures were subsequently damaged by summer convective storm events and they are being redesigned. At the request of DOE/LM, Desert Research Institute (DRI) reviewed the proposed redesign plans of the erosion control structures. The purpose of this review is to support DOE/LM decisions regarding mitigation of ongoing erosion processes, including assessing possible repair of the existing erosion control structures, as well as plan for effective long-term site management. This design review is performed in reference to the Uranium Mill Tailings Radiation Control Act (UMTRCA) standards contained in 40 CFR 192.02 that require containment of residual radioactive material be effective for up to 1,000 years (if achievable, but certainly for 200 years), limit radon release, protect groundwater, and minimize future maintenance. The erosion control structures under review are not subject to the UMTRCA standard directly, but they contribute to the performance of the overall containment system by virtue of their relationship with the large diversion channels bounding the disposal cell. The 11 design drawings included in “Erosion Control Alternatives Analysis, L-Bar, New Mexico, Disposal Site, LTS-111-0043-08-002,” dated January 11, 2019, and listed in Appendix A, and supporting calculations in Weston (2019) are the focus of the review. Additionally, DOE/LM provided supporting data such as a 2018 photogrammetry-based digital elevation model of the site, precipitation records collected from an on-site weather station, and sedimentation records collected at an on-site basin. This assessment includes review of the proposed design to mitigate current site conditions but also addresses site changes between the initial erosion assessment report (Miller et al., 2012) and current conditions. The analysis is at a predesign engineering level and does not include development of hydraulic or sediment transport models. Site precipitation data are included in Miller et al. (2012). The natural conditions of the site, the design of site diversion systems, observed erosion at the site, and predesign engineering analysis are used to develop a holistic view of the challenges to L-Bar Site stability and possible responsive actions.

54 ENVIRONMENTAL SCIENCES↗

High-Fidelity Analysis of EV Integration on Real Utility Feeders in Colorado

Residential electric vehicle (EV) charging has the potential to alter long-held assumptions on load characteristics impacting distribution grid planning, operations, and design standards. This study identifies analysis and control methods to increase the affordability of residential EV charging both for Xcel Energy and their customers. The project also provides solutions for more reliable grid interconnection that can support a reliable utility business model prepared for increasing EV charging load in the coming years. For this project, we referenced Level 2 alternating current (AC) onboard charging profiles for various vehicle models and high-fidelity charging data collected at the experimental setup established at the EV Research Infrastructure Laboratory at the National Renewable Energy Laboratory (NREL). Next, we developed EV adoption models for 2030 and 2040 for the Boulder and Aurora regions in Colorado. Moreover, we evaluated different smart charging control algorithms and compared their performance. We developed time-of-use (TOU)-based and grid-aware active EV charging control methods and integrated them within the study region to understand field impacts. Diving deeper, we selected 10 feeders in Boulder and Aurora for high-fidelity grid modeling down to the house level. We executed detailed grid analysis comparing the smart charge management (SCM) algorithms we developed. Finally, we created a novel tool, Electric Vehicle Infrastructure--Distribution System Integration Tool (EVI-DiST), to integrate all the approaches in a single software environment to provide easy integration, fast simulation, and detailed evaluation capability for utility engineers and other stakeholders.

33 ADVANCED PROPULSION SYSTEMS↗

A Modeling Approach to Support Changeability Analysis and Management of Earth Observation Portfolios

Earth observing (EO) mission portfolios provide data on many geophysical parameters that collectively inform our understanding of the Earth system. To observe large-scale climate trends, it is important to collect data on many parameters over time. However, gaps may occur between missions due to formulation complexity, development delays, and uncertain events in operations. These gaps may impact the ability to provide sustained measurements. Developing a balanced EO mission portfolio is key to supporting study of the Earth system. Yet, decision-making at the portfolio level is a complex task because missions often address multiple parameters. Currently, the likelihood of data gaps is often assessed for an individual parameter, but decisions and events can impact data collection for many parameters. This poster introduces a modeling approach that supports management of the many parameter impacts of decisions and uncertain events. The approach provides a foundation for analyzing changeability in EO mission portfolios. Changeability analysis provides insight into a portfolio’s sensitivity to changes caused by decisions or uncertain events. The model is developed to analyze two aspects of changeability, robustness and flexibility, in EO mission portfolios. In context of these portfolios, the authors define robustness as a portfolio’s ability to provide sustained measurements despite future uncertainties, and they define flexibility as the availability of decision alternatives that contribute to parameter coverage at little detriment to the rest of the portfolio. The proposed model characterizes a portfolio’s sensitivity to change by capturing mission-parameter interconnectivity and redundancy in parameter coverage. The model can be analyzed to identify events that can create substantial gaps, thereby revealing focus areas for mitigation efforts. The model can also be analyzed to identify gap mitigation decisions that may improve parameter coverage with little detriment to the rest of the portfolio, thereby revealing favorable pathways for portfolio improvement. Developing a process for identifying these threats and opportunities will be the focus of future work. A parallel poster proposes a standard for visualizing and communicating portfolio-level impacts of decisions and uncertain events.

Lindsey Jacobson↗

Code for multi-shape Gaussian process (GP) fitting with uncertainty quantification (UQ)

This is code associated with the publication “Nonparametric Multi-shape Modeling with Uncertainty Quantification,” authored by Hengrui Luo (Lawrence Berkeley National Laboratory) and Justin Strait (Los Alamos National Laboratory). The code is used to fit multiple-output Gaussian process (GP) models of planar closed curves to collections of ordered point sets, allowing for flexible nonlinear prediction of the underlying curve under dense or sparse point set samplings and with or without noise, as well as tractable uncertainty quantification. To do this, we employ use of a periodic kernel to account for the nonlinear input space of closed curves, and combine with coregionalization models to account for dependence both (i) between curve coordinates, and (ii) between pairs of curves. Functions in the code are capable of fitting these models, as well as performing additional tasks with the fitted curves such as (a) shape registration and alignment, (b) shape averaging, and (c) fitting for curve sub-populations / clusters.

Strait, Justin↗

Enabling Cloud Services and Enhanced Data Discovery With Earthdata-Varinfo

NASA’s Earth Observing System Data and Information System (EOSDIS) contains thousands of Earth science datasets from satellites, models, and field campaigns. Each of these collections can contain hundreds of variables that describe each measurement within the dataset, therefore an automated method for generating UMM-Var records is necessary. The Unified Metadata Model for Variables (UMM-Var) provides a framework for variable metadata records in NASA’s Common Metadata Repository (CMR). The Python tool, earthdata-varinfo, was developed to solve this problem of automating the curation of UMM-Var records. Given either a collection DMR file or a netCDF-4 file, earthdata-varinfo can scrape variable metadata and return a CMR compliant UMM-Var record. Earthdata-varinfo can generate thousands of UMM-Var records in a matter of seconds, thus enabling subsetting capabilities and enhancing data discovery.

Eni Awowale↗

Simulation-trained machine learning models for Lorentz transmission electron microscopy

Understanding the collective behavior of complex spin textures, such as lattices of magnetic skyrmions, is of fundamental importance for exploring and controlling the emergent ordering of these spin textures and inducing phase transitions. It is also critical to understand the skyrmion–skyrmion interactions for applications such as magnetic skyrmion-enabled reservoir or neuromorphic computing. Magnetic skyrmion lattices can be studied using in situ Lorentz transmission electron microscopy (LTEM), but quantitative and statistically robust analysis of the skyrmion lattices from LTEM images can be difficult. In this work, we show that a convolutional neural network, trained on simulated data, can be applied to perform segmentation of spin textures and to extract quantitative data, such as spin texture size and location, from experimental LTEM images, which cannot be obtained manually. This includes quantitative information about skyrmion size, position, and shape, which can, in turn, be used to calculate skyrmion–skyrmion interactions and lattice ordering. We apply this approach to segmenting images of Néel skyrmion lattices so that we can accurately identify skyrmion size and deformation in both dense and sparse lattices. The model is trained using a large set of micromagnetic simulations as well as simulated LTEM images. This entirely open-source training pipeline can be applied to a wide variety of magnetic features and materials, enabling large-scale statistical studies of spin textures using LTEM.

McCray, Arthur R. C. (ORCID:0000000160774698)↗

Packaged SMIP Smart Connector for Ectron Computers

The project provides appropriate software modules, which allow to represent a physical oven as a virtual oven model. For that a virtual oven model is developed, which defines oven parameters like temperature, power consumption but also the door status and the humidity. To connect a real oven to the virtual model for monitoring and control multiple sensors are used to collect data. Using a MQTT based data connection the measured parameters are send to the CESMII environment for further processing and monitoring. Within this project the CESMII model for the general oven was developed and provided. Further the sensors were connected to the actual oven. The sensor data is collected via means of a MQTT based data transfer protocol to a gateway module. The gateway module then translates and transfers the collected data to the actual CESMII oven model.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A scheme for reducing the effect of selective availability on precise geodetic measurements from the Global Positioning System

From March to August 1990, the signals transmitted by the Block II satellites of the GPS were dithered under a policy of 'Selective Availability' (SA). The dithering appears as an about 10 to the -10th deviation of the satellite oscillator frequency, which, when accumulated over several minutes, can produce an error of about 100 cycles in the model for carrier beat phase. Differencing between simultaneously sampling receivers minimizes the error. If, however, the receivers do not sample simultaneously, it is necessary to model the frequency deviation. Such a model is here applied to data collected in March 1990 by TI4100 and Minimac receivers sampling at times separated by 0.92 s. Applying the algorithm significantly improves the rms scatter of the estimated relative position vectors. The rms scatter from a data set including dithered satellites is similar for both simultaneously and nonsimultaneously sampling receivers, a result which indicates that SA can be adequately modeled.

Feigl, Kurt L.↗

Temporal Cyber Attack Detection.

Rigorous characterization of the performance and generalization ability of cyber defense systems is extremely difficult, making it hard to gauge uncertainty, and thus, confidence. This difficulty largely stems from a lack of labeled attack data that fully explores the potential adversarial space. Currently, performance of cyber defense systems is typically evaluated in a qualitative manner by manually inspecting the results of the system on live data and adjusting as needed. Additionally, machine learning has shown promise in deriving models that automatically learn indicators of compromise that are more robust than analyst-derived detectors. However, to generate these models, most algorithms require large amounts of labeled data (i.e., examples of attacks). Algorithms that do not require annotated data to derive models are similarly at a disadvantage, because labeled data is still necessary when evaluating performance. In this work, we explore the use of temporal generative models to learn cyber attack graph representations and automatically generate data for experimentation and evaluation. Training and evaluating cyber systems and machine learning models requires significant, annotated data, which is typically collected and labeled by hand for one-off experiments. Automatically generating such data helps derive/evaluate detection models and ensures reproducibility of results. Experimentally, we demonstrate the efficacy of generative sequence analysis techniques on learning the structure of attack graphs, based on a realistic example. These derived models can then be used to generate more data. Additionally, we provide a roadmap for future research efforts in this area.

97 MATHEMATICS AND COMPUTING↗

Mixing of Liquid Methane Releases

Spontaneous Raman scattering images of liquid and near liquid methane released through 1 and 1.25 mm diameter orifices were taken using a pulsed planar laser sheet. The methane back pressure was varied between 2 and 6 bar abs with methane temperatures between 130 and 220 K. Analysis of the Raman images resulted in the planar concentration and temperature fields of the methane jets. The measured methane concentration was compared with empirical relationships for warm gas releases and found to be in agreement in terms of centerline concentration decay rate, self-similarity, and half-width decay rate. Comparisons were then made for anticipated real-world CNG and LNG releases showing similar extents of flammable mass for the two fuel options. Measured images were compared to a cold gas release model, which showed good agreement over the range of methane release temperatures, pressures, and nozzle sizes. The collected measurements provide validation of this cold release model which will be used to model additional scenarios and inform LNG safety codes and standards.

03 NATURAL GAS↗

Load Composition Analysis in Support of the NERC Load Modeling Task Force. 2019-2020 Field Test of the Composite Load Model

In 2015, NERC’s reliability standards were revised to require the use of dynamic load models in transmission planning studies. To comply with the standards, planners must use load models that explicitly represent the dynamic behavior of the different constituents of load at each load bus within their transmission planning models. The most important of these constituents are motor-driven and power electronics-based loads. Collectively, these representations are known as composite load models. In anticipation of the compliance date for the new standards, NERC’s Load Modeling Task Force (LMTF), in 2019, initiated a field test of composite load models involving the regional reliability planning entities. In support of the field test, DOE and BPA researchers developed region-specific composite load models that could be assigned to each non-industrial load bus in the planning models for each of the North American interconnections. Separate models were developed for each hour of a summer peak day, a winter peak day, and a spring light-load day. This report is the technical documentation for the load composition analysis that was conducted to develop these non-industrial composite load models.

24 POWER TRANSMISSION AND DISTRIBUTION↗

On Estimating Provenances of Lunar Highland Materials

That even relatively small impacts can spread material across the face of the Moon is evident from the rays of Tycho. Tycho ejecta triggered the landslide that produced the light mantle deposit at Apollo 17 and perhaps excavated the Central Valley craters there. Basin-sized impacts appear to follow the same scaling laws as smaller impacts, as indicated by the satisfaction of a geophysical model. These giant impacts rearranged huge amounts of premare material, complicating the determination of provenance of materials collected from the highlands. We have developed a model to estimate the probability that material at a particular location might derive from a given basin or large crater. This model is based on crater scaling laws, and effects of secondary cratering. Because it accounts for the volume of primary ejecta from the basin-forming transient craters and the excavating and mixing effects of these ejecta with the substrate onto which they fall, it gives much thicker deposits than an early work. Our modeling takes into account the distribution of sizes of primary ejecta fragments (PriFrags) to obtain the probability at a given site for a deposit of a particular thickness and with a fraction of PriFrags.

Haskin, Larry A.↗

Mineral dissolution and precipitation during CO 2 injection at the Frio-I Brine Pilot: Geochemical modeling and uncertainty analysis

During the Frio-I Brine Pilot CO 2 injection experiment in 2004, distinct geochemical changes in response to the injection of 1600 tons of CO 2 were recorded in samples collected from the monitoring well. Previous geochemical modeling studies have considered dissolution of calcite and iron oxyhydroxides, or release of adsorbed iron, as the most likely sources of the increased ion concentrations. We explore in this modeling study possible alternative sources of the increasing calcium and iron, based on the data from the detailed petrographic characterization of the Upper Frio Formation “C”. Particularly, we evaluate whether dissolution of pyrite and oligoclase (anorthite component) can account for the observed geochemical changes. Due to kinetic limitations, dissolution of pyrite and anorthite cannot account for the increased iron and calcium concentrations on the time scale of the field test (10 days). However, dissolution of these minerals is contributing to carbonate and clay mineral precipitation on the longer time scales (1000 years). The one-dimensional reactive transport model predicts carbonate minerals, dolomite and ankerite, as well as clay minerals kaolinite, nontronite and montmorillonite, will precipitate in the Frio Formation “C” sandstone as the system progresses towards chemical equilibrium during a 1000-year period. Cumulative uncertainties associated with using different thermodynamic databases, activity correction models (Pitzer vs. B-dot), and extrapolating to reservoir temperature, are manifested in the difference in the predicted mineral phases. Furthermore, these models are consistent with regards to the total volume of mineral precipitation and porosity values which are predicted to within 0.002%.

54 ENVIRONMENTAL SCIENCES↗

Building and Calibration of a FAST Model of the SWAY Prototype Floating Wind Turbine: Preprint

Present efforts to verify and validate aero-hydro-servo-elastic numerical simulation tools that predict the dynamic response of a floating offshore wind turbine are primarily limited to code-to-code comparisons or code-to-data comparisons using data from wind-wave basin tests. In partnership with SWAY AS, the National Renewable Energy Laboratory (NREL) installed scientific wind, wave, and motion measurement equipment on the 1/6.5th-scale prototype SWAY floating wind system to collect data to validate a FAST model of the SWAY design in an open-water condition. Nanyang Technological University (NTU), through a collaboration with NREL, assisted in this validation.

17 WIND ENERGY↗