Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CELLS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Dynamics of Back Electron Transfer in Dye-Sensitized Solar Cells Featuring 4-tert-Butyl-Pyridine and Atomic-Layer-Deposition Alumina as Surface Modifiers.

A series of dye-sensitized solar cells (DSCs) was constructed with TiO2 nanoparticles and N719 dye. The standard I-3(-)/I- redox shuttle and the Co(1,10-phenanthroline)(3)(3+/2+) shuttle were employed. DSCs were modified with atomic-layered-deposited (ALD) coatings of Al2O3 and/or with the surface-adsorbing additive 4-tert-butyl-pyridine. Current-voltage data were collected to ascertain the influence of each modification upon the back electron transfer (ET) dynamics of the DSCs. The primary effect of the additives alone or in tandem is to increase the open-circuit voltage. A second is to alter the short-circuit current density, J(SC). With dependence on the specifics of the system examined, any of a myriad of dynamics-related effects were observed to come into play, in both favorable (efficiency boosting) and unfavorable (efficiency damaging) ways. These effects include modulation of (a) charge-injection yields, (b) rates of interception of injected electrons by redox shuttles, and (c) rates of recombination of injected electrons with holes on surface-bound dyes. In turn, these influence charge-collection lengths, charge-collection yields, and onset potentials for undesired dark current. The microscopic origins of the effects appear to be related mainly to changes in driving force and/or electronic coupling for underlying component redox reactions. Perhaps surprisingly, only a minor role for modifier-induced shifts in conduction-band-edge energy was found. The combination of DSC-efficiency-relevant effects engendered by the modifiers was found to vary substantially as a function of the chemical identity of the redox shuttle employed. While types of modifiers are effective, a challenge going forward will be to construct systems in ways in which the benefits of organic and inorganic modifiers can be exploited in fully additive, or even synergistic, fashion.

Katz, Michael J.↗

Correlating highpower conversion efficiency of PTB7:PC 71 BM inverted organic solar cells with nanoscale structures [Unraveling the correlation between the structural aspects and power conversion efficiency in PTB7:PC 71 BM inverted organic solar cells]

Advances in materials design and device engineering led to inverted organic solar cells (i-OSCs) with superior power conversion efficiencies (PCEs) to their conventional counterparts, in addition to the well-known better ambient stability. Despite the significant progress, however, it has so far been unclear how the morphologies of the photoactive layer and its interface with the cathode modifying layer impact device performance. Here, we report an in-depth morphology study of the i-OSC active and cathode modifying layers, employing a model system with the well-established bulk-heterojunction, PTB7:PC 71 BM as the active layer and poly-[(9,9-bis(3 -( N,N -dimethylamino)propyl)-2,7-fluorene)- alt -2,7-(9,9-dioctylfluorene)] (PFN) as the cathode surface modifying layer. We have also identified the role of a processing additive, 1,8-diiodooctane (DIO), used in the spin-casting of the active layer to increase PCE. Using a variety of characterization techniques, we demonstrate that the high PCEs of i-OSCs are due to the smearing (diffusion) of electron-accepting PC 71 BM into the PFN layer, resulting in improved electron transport. The PC 71 BM diffusion occurs after spin-casting the active layer onto the PFN layer, when residual solvent molecules act as a plasticizer. Furthermore, the DIO additive, with a higher boiling point than the host solvent, has a longer residence time in the spin-cast active layer, resulting in more PC 71 BM smearing and therefore more efficient electron transport. This work provides important insight and guidance to further enhancement of i-OSC performance by materials and interface engineering.

14 SOLAR ENERGY↗

From binary to quaternary: high-tolerance of multi-acceptors enables development of efficient polymer solar cells [From binary to quaternary: high-tolerance of multi-acceptors enables efficient polymer solar cells]

For optimum coverage of the optical spectrum and further enhancement of the carrier transport, ternary and even more multi-composition strategies have been universally explored. As PC 71 BM and PC 61 BM are both compatible with PTB7-Th and IEICO-4F takes advantage of optical absorption in the near-infrared region, we combined PTB7-Th:IEICO-4F:PC 71 BM:PC 61 BM quaternary compositions to fabricate high-efficiency polymer solar cells (PSCs) with good tolerance ratios of the fullerene acceptors. After blending the fullerene alloys PC 71 BM and PC 61 BM into the host PTB7-Th:IEICO-4F system, the optical response in the whole wavelength regime has been strengthened with significantly enhanced electron mobility. Concomitantly, the short-circuit current density ( J sc ) surged from 22.07 to 24.37 mA cm –2 and the fill factor (FF) ascended from 58.24% to 69.30%, which finally resulted in a champion power conversion efficiency (PCE) of 12.52%, which is much higher than that of the binary control device (9.67%). This significant improvement is attributed to the fine-tuning of the morphology of the photo-active layer and feasible carrier transport. Interestingly, this finding implicates the synergistic effect of PC 71 BM and PC 61 BM to successfully enhancing the carrier transport. In addition, it demonstrates a broad tolerance of the acceptor proportions, resulting in higher PCE values for the quaternary devices as compared to the ternary devices. Lastly, generality for other systems evidences and provides guidelines for quaternary strategy utilization. Furthermore, the simplicity of quaternary strategies could be greatly beneficial to not yet elaborate commercial processes.

14 SOLAR ENERGY↗

Measurement of nanoscale external quantum efficiency of conjugated polymer. Fullerene solar cells by photoconductive atomic force microscopy

Photoconductive atomic force microscopy is used to investigate nanoscale incident photon-to-current efficiency spectra of polymer bulk heterojunction solar cells based on poly[2-methoxy-5-(3,7-dimethyloctyloxy)]-1,4-phenylenevinylene (MDMO-PPV) and [6,6]-phenyl-C 71 -butyric acid methyl ester (PC 71 BM) . Nanoscale external quantum efficiency reveals the complex morphology of MDMO-PPV:PC 71 BM films cast from toluene solution. Not only electron transfer from the photoexcited donor to the fullerene but also hole transfer process from photoexcited fullerene to the donor phase due to highest occupied molecular orbital offset is observed. The difference in performance between toluene and chlorobenzene-cast devices is explained by the variation in relative contributions from two charge transfer mechanisms.

14 SOLAR ENERGY↗

Direct imaging of enhanced current collection on grain boundaries of Cu(In,Ga)Se{sub 2} solar cells

We report on direct imaging of current collection by performing conductive atomic force microscopy (C-AFM) measurement on a complete Cu(In,Ga)Se{sub 2} solar cell. The localized current was imaged by milling away the top conductive layer of the device by repeated C-AFM scans. The result exhibits enhanced photocurrent collection on grain boundaries (GBs) of CIGS films, consistent with the argument for electric-field-assisted carrier collection on the GBs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Co-sensitization of ZnO by CdS quantum dots in natural dye-sensitized solar cells with polymeric electrolytes to improve the cell stability

The CdS quantum dots (QDs) were deposited on ZnO layer by chemical bath deposition method to absorb light in the shorter wavelength region and used as photoanode in the dye sensitized solar cell (DSSCs) with natural dye extracted from Noni leaves. Microstructures of CdS-ZnO from various dipping time were characterized by XRD, FE-SEM and EDX. The results showed that the CdS is hexagonal structure and the amount of CdS increases when the dipping time increases. The maximal conversion efficiency of 0.292% was achieved by the DSSCs based on CdS QDs-sensitized ZnO film obtained from 9 min-dipping time. Furthermore, the stability of DSSCs was improved by using polymeric electrolyte. Poly (acrylic acid) (PAA) and Polyacrylamide (PAM) were introduced to CdS QDs-sensitized ZnO film from 9 min-dipping time. Each polymeric electrolyte was prepared by swelling from 0.1-2.0 %w in H2O. The maximal conversion efficiency of 0.207% was achieved for DSSCs based on CdS QDs-sensitized ZnO film with PAM 1.0% and the conversion efficiency was decreased 25% when it was left for1 hr.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Light-trapping optimization in wet-etched silicon photonic crystal solar cells

We demonstrate, by numerical solution of Maxwell's equations, near-perfect solar light-trapping and absorption over the 300–1100 nm wavelength band in silicon photonic crystal (PhC) architectures, amenable to fabrication by wet-etching and requiring less than 10 μm (equivalent bulk thickness) of crystalline silicon. These PhC's consist of square lattices of inverted pyramids with sides comprised of various (111) silicon facets and pyramid center-to-center spacing in the range of 1.3–2.5 μm. For a wet-etched slab with overall height H = 10 μm and lattice constant a = 2.5 μm, we find a maximum achievable photo-current density (MAPD) of 42.5 mA/cm{sup 2}, falling not far from 43.5 mA/cm{sup 2}, corresponding to 100% solar absorption in the range of 300–1100 nm. We also demonstrate a MAPD of 37.8 mA/cm{sup 2} for a thinner silicon PhC slab of overall height H = 5 μm and lattice constant a = 1.9 μm. When H is further reduced to 3 μm, the optimal lattice constant for inverted pyramids reduces to a = 1.3 μm and provides the MAPD of 35.5 mA/cm{sup 2}. These wet-etched structures require more than double the volume of silicon, in comparison to the overall mathematically optimum PhC structure (consisting of slanted conical pores), to achieve the same degree of solar absorption. It is suggested these 3–10 μm thick structures are valuable alternatives to currently utilized 300 μm-thick textured solar cells and are suitable for large-scale fabrication by wet-etching.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Metastability and reliability of CdTe solar cells

Thin-film modules of all technologies often suffer from performance degradation over time. Some of the performance changes are reversible and some are not, which makes deployment, testing, and energy-yield prediction more challenging. Manufacturers devote significant empirical efforts to study these phenomena and to improve semiconductor device stability. Still, understanding the underlying reasons of these instabilities remains clouded due to the lack of ability to characterize materials at atomistic levels and the lack of interpretation from the most fundamental material science. The most commonly alleged causes of metastability in CdTe devices, such as ‘migration of Cu’, have been investigated rigorously over the past fifteen years. Still, the discussion often ended prematurely with stating observed correlations between stress conditions and changes in atomic profiles of impurities or CV doping concentration. Multiple hypotheses suggesting degradation of CdTe solar cell devices due to interaction and evolution of point defects and complexes were proposed, and none of them received strong theoretical or experimental confirmation. We believe it should be noted that atomic impurity profiles in CdTe provide very little intelligence on active doping concentrations. The same elements could form different energy states, which could be either donors or acceptors, depending on their position in crystalline lattice. Defects interact with other extrinsic and intrinsic defects; for example, changing the state of an impurity from an interstitial donor to a substitutional acceptor often is accompanied by generation of a compensating intrinsic interstitial donor defect. Moreover, all defects, intrinsic and extrinsic, interact with the electrical potential and free carriers so that charged defects may drift in the electric field and the local electrical potential affects the formation energy of the point defects. Such complexity of interactions in CdTe makes understanding of temporal changes in device performance even more challenging and a closed solution that can treat the entire system and its interactions is required.

14 SOLAR ENERGY↗

Diamond anvil cell measurement of high-pressure yield strength of vanadium using in situ thickness determination

The pressure dependence of the quasistatic yield strength of vanadium in polycrystalline foils and powders has been measured up to 90 GPa at room temperature using an implementation of a nonhydrostatic diamond-anvil cell technique, an extension of the technique of Meade and Jeanloz [C. Meade and R. Jeanloz, J. Geophys. Res. 93, 3261 (1988)]. A feature present in this work is the use of an in situ determination of the sample thickness and pressure profile using synchrotron x-ray techniques, allowing a determination of the strength at each point across the sample. Following an initial increase in the strength with pressure, a decrease in the strength of vanadium was observed starting at {approx}40-50 GPa. The softening of the yield strength of vanadium at high pressure is quite surprising and unusual, following the trend of an unusual softening of the shear modulus associated with a subtle phase transition from body-centered-cubic-to-rhombohedral structure in a recent x-ray diffraction experiment.

36 MATERIALS SCIENCE↗

In situ defect annealing of swift heavy ion irradiated CeO 2 and ThO 2 using synchrotron X-ray diffraction and a hydrothermal diamond anvil cell

Hydrothermal diamond anvil cells (HDACs) provide facile means for coupling synchrotron Xray techniques with pressure up to 10 GPa and temperature up to 1300 K. This manuscript reports on an application of the HDAC as an ambient-pressure sample environment for performing in situ defect annealing and thermal expansion studies of swift heavy ion irradiated CeO 2 and ThO 2 using synchrotron X-ray diffraction. The advantages of the in situ HDAC technique over conventional annealing methods include: rapid temperature ramping and quench times, high-resolution measurement capability, simultaneous annealing of multiple samples, and prolonged temperature- and apparatus stability at high temperatures. Isochronal annealing between 300 K and 1100 K revealed 2-stage and 1-stage defect recovery processes for irradiated CeO 2 and ThO 2 , respectively; indicating that the morphology of the defects produced by swift heavy ion irradiation of these two materials differs significantly. These results suggest that electronic configuration plays a major role in both the radiation-induced defect production and high temperature defect recovery mechanisms of CeO 2 and ThO 2 .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Large-Area Material and Junction Damage in c-Si Solar Cells by Potential-Induced Degradation

A new potential-induced degradation (PID) mechanism for c-Si is reported. Multiple characterization techniques in various aspects of a material's chemical, structural, electrical, and optoelectrical nature, as well as in atomic, nanometer, micrometer, millimeter, and cell and module scales, are combined. All results point consistently to a new discovery: substantial large-area deterioration of materials and junctions plays a major role.

14 SOLAR ENERGY↗