Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BACKSCATTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Scattering properties of Venus' surface

Radar backscatter functions Sigma-(carat)(sub 0)(phi) for incidence angles between 0 less than or equal to phi less than or equal to 4-10 deg were derived from Magellan altimetry radar echoes. The procedure includes constrained solution of a system of simultaneous equations for which the echo-spectrum and echo time profile are inputs. A practical and workable set of constraints was applied; optimization and improved results are expected as the analysis matures. The scattering functions yield information on small-scale surface structures (tens of centimeters to tens of meters) but averaged over hundreds of sq km. RMS surface slopes derived from fits of analytic functions to the Sigma-(carat)(sub 0)(phi) results were converted to map form and show patterns similar to those reported using other techniques. While all three forms are found on Venus, fit residuals imply that an exponential scattering function matches data better than either the Hagfors or Gaussian form in most areas, although the Hagfors function may be a better descriptor at some sites. Limited study of image data indicates that average backscatter cross section, and possibly its slope, can be derived at oblique angles (17 deg less than or equal to phi less than or equal to 45 deg). Offsets of the echo peak in altimetry spectra are surprisingly common and are loosely correlated with Venus topography, but no cause for this phenomenon was identified.

Tyler, G. L.↗

High-resolution Earth-based lunar radar studies: Applications to lunar resource assessment

The lunar regolith will most likely be a primary raw material for lunar base construction and resource extraction. High-resolution radar observations of the Moon provide maps of radar backscatter that have intensity variations generally controlled by the local slope, material, and structural properties of the regolith. The properties that can be measured by the radar system include the dielectric constant, density, loss tangent, and wavelength scale roughness. The radar systems currently in operation at several astronomical observatories provide the ability to image the lunar surface at spatial resolutions approaching 30 m at 3.8 cm and 12.6 cm wavelengths and approximately 500 m at 70 cm wavelength. The radar signal penetrates the lunar regolith to a depth of 10-20 wavelengths so the measured backscatter contains contributions from the vacuum-regolith interface and from wavelength-scale heterogeneities in the electrical properties of the subsurface material. The three wavelengths, which are sensitive to different scale structures and scattering volumes, provide complementary information on the regolith properties. Aims of the previous and future observations include (1) analysis of the scattering properties associated with fresh impact craters, impact crater rays, and mantled deposits; (2) analysis of high-incidence-angle observations of the lunar mare to investigate measurement of the regolith dielectric constant and hence porosity; (3) investigation of interferometric techniques using two time-delayed observations of the same site, observations that require a difference in viewing geometry less than 0.05 deg and, hence, fortuitous alignment of the Earth-Moon system when visible from Arecibo Observatory.

Stacy, N. J. S.↗

Development of a 9.3 micrometer CW LIDAR for the study of atmospheric aerosol

This report provides a brief summary of the basic requirements to obtain coherent or heterodyne mixing of the optical radiation backscattered by atmospheric aerosols with that from a fixed frequency source. The continuous wave (CW) mode of operation for a coherent lidar is reviewed along with the associated lidar transfer equation. A complete optical design of the three major subsystems of a CW, coherent lidar is given. Lens design software is implemented to model and optimize receiver performance. Techniques for the opto-mechanical assembly and some of the critical tolerances of the coherent lidar are provided along with preliminary tests of the subsystems. Included in these tests is a comparison of the experimental and the theoretical average power signal-to-noise ratio. The analog to digital software used to evaluate the power spectrum of the backscattered signal is presented in the Appendix of this report.

Whiteside, B. N.↗

Calculation of area-averaged vertical profiles of the horizontal wind velocity from volume-imaging lidar data

Area-averaged horizontal wind measurements are derived from the motion of spatial inhomogeneities in aerosol backscattering observed with a volume-imaging lidar. Spatial averaging provides high precision, reducing sample variations of wind measurements well below the level of turbulent fluctuations, even under conditions of very light mean winds and strong convection or under the difficult conditions represented by roll convection. Wind velocities are measured using the two-dimensional spatial cross correlation computed between successive horizontal plane maps of aerosol backscattering, assembled from three-dimensional lidar scans. Prior to calculation of the correlation function, three crucial steps are performed: (1) the scans are corrected for image distortion by the wind during a finite scan time; (2) a temporal high pass median filtering is applied to eliminate structures that do not move with the wind; and (3) a histogram equalization is employed to reduce biases to the brightest features.

Schols, J. L.↗

Active and passive microwave measurements of soil moisture in FIFE

During the intensive field campaigns of the First International Satellite Land Surface Climatology Project (ISLSCP) Field Experiment (FIFE) in May-October of 1987, several nearly simultaneous measurements were made with low-altitude flights of the L-band radiometer and C- and X-band scatterometers over two transects in the Konza Prairie Natural Research Area, some 8 km south of Manhattan, Kansas. These measurements showed that although the scatterometers were sensitive to soil moisture variations in most regions under the flight path, the L-band radiometer lost most of its sensitivity in regions unburned for many years. The correlation coefficient derived from the regression between the radar backscattering coefficient and the soil moisture was found to improve with the increase in antenna incidence angle. This is attributed to a steeper falloff of the backscattering coefficient as a function of local incidence at angles near nadir than at angles greater than 30 deg.

Wang, J. R.↗

High-resolution spectrum of the Galactic center

Recent observations of the Galactic center region indicate the presence of a narrow gamma-ray line feature at 170 keV, and theoretical speculations suggest it may result from Compton backscattering of the 511 keV annihilation radiation. The high-resolution gamma-ray spectrometer on HEAO 3 observed the Galactic center in the fall of 1979 and in the spring of 1980. In view of the recent developments, the HEAO data were re-examined to search for this new feature and to look for possible correlations with the 511 keV line emisison. No evidence for such Compton backscattered radiation was found and the derived upper limits for emission in a line feature near 170 keV were well below previously reported fluxes, indicating possible time variability.

Mahoney, W. A.↗

Measurement and calibration of differential Mueller matrix of distributed targets

A rigorous method for calibrating polarimetric backscatter measurements of distributed targets is presented. By characterizing the radar distortions over the entire mainlobe of the antenna, the differential Mueller matrix is derived from the measured scattering matrices with a high degree of accuracy. It is shown that the radar distortions can be determined by measuring the polarimetric response of a metallic sphere over the main lobe of the antenna. Comparison of results obtained with the new algorithm with the results derived from the old calibration method show that the discrepancy between the two methods is less than 1 dB for the backscattering coefficients. The discrepancy is more drastic for the phase-difference statistics, indicating that removal of the radar distortions from the cross products of the scattering matrix elements cannot be accomplished with the traditional calibration methods.

Sarabandi, Kamal↗

Change detection on Alaska's North Slope using repeat-pass ERS-1 SAR images

Measurements of the C-band (wavelength = 5 cm) radar cross section of an area in the Brooks Range foothills on the North Slope of Alaska using images from the ERS-1 satellite show significant temporal changes. These changes are strongly correlated with elevation and hillslope orientation and are greatest on some of the elevated areas and weaker in river drainages. By constructing 'difference images' using various image pairs, and by analyzing climatological and hydrological data from the site, we conclude that the radar backscatter changes are largely due to changes in soil and vegetation liquid water content induced by freeze/thaw events. The correlation with topography in the difference images arises from the dependence of vegetation, organic layer thickness, and volumetric water content on hillslope position and orientation. These results demonstrate the viability of radar backscatter intensity comparisons using repeat-pass images as a means of change detection.

Villasenor, John D.↗

Infrared lidars for atmospheric remote sensing

Lidars using pulsed TEA-CO2 transmitters and coherent receivers have been developed at JPL and used to measure atmospheric backscatter and extinction at wavelengths in the 9-11 micron region. The global winds measurement application of coherent Doppler lidar requires intensive study of the global climatology of aerosol and cloud backscatter and extinction. An airborne lidar was recently flown on the NASA DC-8 research aircraft for operation during two Pacific circumnavigation missions. The instrument characteristics, as well as representative measurement results, are discussed.

Menzies, Robert T.↗

Review of recent research on the climatic effect of aerosols

A review of recent research on the climatic effects of aerosols is presented. A representative aerosol and climate models were used to study the generation, growth transport, and removal of aerosols. The structure of the radiative-convective models and general circulation models used is described. Large-scale temperature effects, effects on clouds, and local urban effects of trophospheric aerosols are examined. The effects of volcanic eruptions and stratospheric aerosols are also considered. Results indicate that solar radiation backscatter by aerosols increases the planetary albedo. Solar radiation absorption may offset cooling caused by aerosol backscatter but the absorption and emission of terrestrial radiation by aerosols produces a warming effect. It appears that the role of aerosols as cloud condensation nuclei is probably the most significant cause of the radiative effects observed.

Charlock, Thomas P.↗

Greenland observed at high resolution by the Seasat scatterometer

A previously developed method for the reconstruction of surface radar backscatter characteristics is applied to Seasat scatterometer (SASS) data for the study of Greenland's ice sheet. A time series of the radar backscatter images provides an island-wide view of the ice sheet which shows the extent of the summer melt. Medium-scale scatterometer images provide frequent island-wide observations permitting precise measurements of the seasonal extent of the summer melt.

Long, D. G.↗

Monitoring of environmental conditions in the Alaskan forests using ERS-1 SAR data

Preliminary results from an analysis of the multitemporal radar backscatter signatures of tree species acquired by European Remote Sensing Satellite (ERS-1) synthetic aperture radar (SAR) data are presented. Significant changes in radar backscatter are detected. Correlation of these differences with ground truth observations indicate that these are due to changes in soil and liquid water content as a result of freeze/thaw events. C-band observations acquired by the NASA/Jet Propulsion Laboratory Airborne SAR (JPL AIRSAR) instrument demonstrate the potential of a C-band radar instrument to monitor drought/flood events. The potential of ERS-1 for monitoring phenologic changes in the forest and for classifying tree species is less promising.

Rignot, Eric↗

Inversion of surface parameters using fast learning neural networks

A neural network approach to the inversion of surface scattering parameters is presented. Simulated data sets based on a surface scattering model are used so that the data may be viewed as taken from a completely known randomly rough surface. The fast learning (FL) neural network and a multilayer perceptron (MLP) trained with backpropagation learning (BP network) are tested on the simulated backscattering data. The RMS error of training the FL network is found to be less than one half the error of the BP network while requiring one to two orders of magnitude less CPU time. When applied to inversion of parameters from a statistically rough surface, the FL method is successful at recovering the surface permittivity, the surface correlation length, and the RMS surface height in less time and with less error than the BP network. Further applications of the FL neural network to the inversion of parameters from backscatter measurements of an inhomogeneous layer above a half space are shown.

Dawson, M. S.↗

L-band radar scattering from grass

A radar system based on a network analyzer has been developed to study the backscatter from vegetation. The radar is operated at L-band. Radar measurements of a grass field were made in 1991. The radar returns from the grass were measured at three incidence angles. Ground truth and canopy parameters such as blade and stem dimensions, moisture content of the grass and the soil, and blade and stem density, were measured. These parameters are used in a distorted Born approximation model to compute the backscatter coefficients from the grass layer. The model results are compared with the radar data.

Chauhan, N.↗

Resolution enhancement of spaceborne scatterometer data

Spaceborne wind scatterometers are designed principally to measure radar backscatter from the ocean's surface for the determination of the near-surface wind direction and speed. Although measurements of the radar backscatter are made over land, application of these measurements has been limited primarily to the calibration of the instrument. In this paper we present a method for generating enhanced resolution radar images of the earth's surface using spaceborne scatterometry. The technique is based on a new image reconstruction technique which takes advantage of the spatial overlap in scatterometer measurements made at different times to provide enhanced imaging resolution. We describe the reconstruction algorithm and demonstrate the technique using both simulated and actual Seasat-A Scatterometer (SASS) measurements. The SASS-derived images, which have approximately 4 km resolution, dramatically illustrate the resolution enhancement capability of the new technique. The technique permits utilization of both historic and contemporary scatterometer data for medium-scale monitoring of vegetation and polar ice. We discuss the tradeoff between imaging noise and resolution inherent in the technique.

Long, David G.↗

Scattering by aggregates with and without an absorbing mantle - Microwave analog experiments

We present angular scattering functions for loosely packed aggregates of 250 and 500 identical spheres near the Rayleigh size limit before and after the application of successive layers of an absorbing mantle. All measurements were obtained by using the microwave analog technique. Gross features of the scattering by aggregates without a mantle can be interpreted in terms of coherent scattering from the unit spheres acting independently of each other. The largest deviations from this approximation occur after the first minimum in forward scattering and extend to a scattering angle of 60 or 80 deg for our models. This intermediate range is also where the largest differences occur in the scattering from one aggregate to another. The angular extent of the range is largest for aggregates with the smallest dimensions. The scattering function is usually flat in the backscattering hemisphere and has little or no backscattering increase. The coherent scattering approximation breaks down when the aggregates are coated, and an equivalent spheres approximation becomes a better representation. The maximum degree of polarization near a scattering angle of 90 deg first decreases and then increases again as the mantle grows thicker.

Zerull, R. H.↗

Maximum a posteriori classification of multifrequency, multilook, synthetic aperture radar intensity data

We present a maximum a posteriori (MAP) classifier for classifying multifrequency, multilook, single polarization SAR intensity data into regions or ensembles of pixels of homogeneous and similar radar backscatter characteristics. A model for the prior joint distribution of the multifrequency SAR intensity data is combined with a Markov random field for representing the interactions between region labels to obtain an expression for the posterior distribution of the region labels given the multifrequency SAR observations. The maximization of the posterior distribution yields Bayes's optimum region labeling or classification of the SAR data or its MAP estimate. The performance of the MAP classifier is evaluated by using computer-simulated multilook SAR intensity data as a function of the parameters in the classification process. Multilook SAR intensity data are shown to yield higher classification accuracies than one-look SAR complex amplitude data. The MAP classifier is extended to the case in which the radar backscatter from the remotely sensed surface varies within the SAR image because of incidence angle effects. The results obtained illustrate the practicality of the method for combining SAR intensity observations acquired at two different frequencies and for improving classification accuracy of SAR data.

Rignot, E.↗

Wind field model-based estimation of Seasat scatterometer winds

A model-based approach to estimating near-surface wind fields over the ocean from Seasat scatterometer (SASS) measurements is presented. The approach is a direct assimilation technique in which wind field model parameters are estimated directly from the scatterometer measurements of the radar backscatter of the ocean's surface using maximum likelihood principles. The wind field estimate is then computed from the estimated model parameters. The wind field model used in this approach is based on geostrophic approximation and on simplistic assumptions about the wind field vorticity and divergence but includes ageostrophic winds. Nine days of SASS data were processed to obtain unique wind estimates. Comparisons in performance to the traditional two-step (point-wise wind retrieval followed by ambiguity removal) wind estimate method and the model-based method are provided using both simulated radar backscatter measurements and actual SASS measurements. In the latter case the results are compared to wind fields determined using subjective ambiguity removal. While the traditional approach results in missing measurements and reduced effective swath width due to fore/aft beam cell coregistration problems, the model-based approach uses all available measurements to increase the effective swath width and to reduce data gaps. The results reveal that the model-based wind estimates have accuracy comparable to traditionally estimated winds with less 'noise' in the directional estimates, particularly at low wind speeds.

Long, David G.↗