Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wind engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Cold Aero Performance of a Two-Dimensional Mixer Ejector Nozzle

Since 1986, NASA and the U.S. aerospace industry have been assessing the economic viability and environmental acceptability of a second-generation supersonic civil transport, or High Speed Civil Transport (HSCT). Environmental acceptability in terms of airport community noise and economic viability are critical elements in this endeavor. Development of a propulsion system that satisfies strict airport noise regulations (FAR36 Stage III levels), at acceptable performance and weight, is critical to the success of any HSCT program. Two-dimensional mixer-ejector (2DME) exhaust systems are one approach in achieving this goal. In support of HSCT development, GEAE (GE Aircraft Engines), under contract to the NASA Glenn Research Center, conducted this test program at the NASA Langley 16 ft transonic wind tunnel to evaluate the cold aerodynamic performance aspects of the 2DME exhaust system concept. The effects of SAR (SAR, suppressor area ratio, = mixed-flow area/primary nozzle throat area), MAR (MAR = overall exhaust system exit/mixing-plane area), flap length, CER (suppressor chute expansion ratio), chute alignment, and free stream Mach number were investigated on a 1/11th cold aerodynamic scale model of a 2DME exhaust system.

Balan, C.↗
NASA NTRS1939

Experiments on the Recovery of Waste Heat in Cooling Ducts, Special Report

Tests have been conducted in the N.A.C.A. full-scale wind tunnel to investigate the partial recovery of the heat energy which is apparently wasted in the cooling of aircraft engines. The results indicate that if the radiator is located in an expanded duct, a part of the energy lost in cooling is recovered; however, the energy recovery is not of practical importance up to airplane speeds of 400 miles per hour. Throttling of the duct flow occurs with heated radiators and must be considered in designing the duct outlets from data obtained with cold radiators in the ducts.

Silverstein, Abe↗
NASA NTRS1991

The dynamics of the HSCT environment

Assessments of the impact of aircraft engine exhausts on stratospheric ozone levels are currently limited to 2D zonally-averaged models which, while completely representing chemistry, involve high parameterization of transport processes. Prospective 3D models under development by NASA-Goddard will use winds from a data-assimilation procedure; the upper troposphere/lower stratosphere behavior of one such model has been verified by direct comparison of model simulations with satellite, balloon, and sonde measurements. Attention is presently given to the stratosphere/troposphere exchange and nonzonal distribution of aircraft engine exhaust.

Douglass, Anne R.↗
NASA NTRSDate not supplied

Developing a Multi-Lingual Autocoding Interface for the MAVERIC-II Dynamics Simulator

Simulation model development in certain high-level languages such as Python, MATLAB, or Simulink are unparalleled by their convenience and rapid turnover time. However, legacy simulation engines often depend on more traditional languages such as FORTRAN or C/C++. The NASA Marshall Aerospace Vehicle Representation in C version II (MAVERIC-II) is a modular, legacy-derived computer program used for high-fidelity, 6 degree-of-freedom (6dof) simulation for aerospace vehicle flights and analyses of guidance and control performance with built-in mathematical modeling of environmental effects such as wind, atmosphere, and gravity as well as dispersion capability for Monte Carlo analysis. MAVERIC-II is modular in the sense that each component software element of the simulation engine may be supplanted for a higher or lower fidelity version. The design flow of the development of these models is often performed in high-level languages as mentioned previously, which must then be translated into C or C++ code to be integrated into MAVERIC-II. We propose a unified method of autocoding and interfacing between several languages and MAVERIC-II, which may be generalized further to any type of 6dof simulation engine.

Mason Nixon↗
NASA NTRSDate not supplied

Developing a Multilingual Auto-coding Interface Control for the MAVERIC-II Dynamics Simulator

Simulation model development in certain high-level languages such as Python, MATLAB, or Simulink are unparalleled by their convenience and rapid turnover time. However, legacy simulation engines often depend on more traditional languages such as FORTRAN or C/C++. The NASA Marshall Aerospace Vehicle Representation in C version II (MAVERIC-II) is a modular, legacy-derived computer program used for high-fidelity, 6 degree-of-freedom (6DOF) simulation for aerospace vehicle flights and analyses of guidance and control performance with built-in mathematical modeling of environmental effects such as wind, atmosphere, and gravity as well as dispersion capability for Monte Carlo analysis. MAVERIC-II is modular in the sense that each component software element of the simulation engine may be supplanted for a higher or lower fidelity version. The design flow of the development of these models is often performed in high-level languages as mentioned previously, which must then be translated into C or C++ code to be integrated into MAVERIC-II. Using principles of model-based design, we propose a unified method of auto-coding and interfacing between several languages and MAVERIC-II, which may be generalized further to any type of 6DOF simulation engine.

Mason Nixon↗
DOE OSTI2024

Searching for Grid-Forming Technologies That Do Not Impact Protection Systems: A promising technology

The design of legacy-line protection elements has been guided by the behavior of synchronous machines during faults. Because of the significant field-winding inductance and rotating mass, the magnitude, angular frequency, and phase angle of the back-electromotive force (EMF) voltage waveforms of synchronous machines remain practically constant for several hundreds of milliseconds after a fault occurs. Furthermore this has facilitated the engineering of the memory-polarization technique in mho distance elements, which has been effective for machine-dominant power grids. However, this assumption is no longer held for inverter-based resources (IBRs) because of the lack of field winding and moment of inertia in power electronics devices. Notably, the negative-sequence directional overcurrent protection and the quadrilateral distance elements have been impacted by early IBRs with grid-following (GFL) controls because they did not inject negative-sequence currents during asymmetrical faults.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRSDate not supplied

Introduction to Aircraft Icing and NASA's Approach to Understanding It

This presentation provides an introduction to aircraft icing and describes NASA’s approach to understanding it. The presentation covers various topics on icing. A general overview of different types of icing is provided, which includes airframe icing, jet engine icing, and rotorcraft icing. The presentation discusses NASA’s approach to studying the various forms of aircraft icing, which includes conducting flight tests, performing ground-based icing wind tunnel tests, and developing computational tools that simulate the icing physics. An overview on the future of aviation and icing is provided. The presentation is largely high level, but also provides some technical icing physics discussion.

Aircraft Icing↗
NASA NTRS1987

Hot gas ingestion: From model results to full scale engine testing

An overview is presented of a joint NASA Lewis McDonnell Aircraft Co. Hot Gas Ingestion (HGI) test program in NASA Lewis' 9 x 15 foot Low Speed Wind Tunnel (LSWT). Advanced short takeoff vertical landing (ASTOVL) aircraft capable of operating from remote sites, damaged runways, aircraft carriers and small air-capable ships are being pursued for deployment around the turn of the century. To achieve this goal, it is important that technologies critical to this unique class of aircraft be developed. One of the ASTOVL concepts, the vectored thrust, has as its critical technology item, the potential of hot gas ingestion (which occurs during vertical flight operation while in ground effect) as a key development issue. Recognizing this need, NASA Lewis Powered Lift Section and McAir have defined a cooperative program for testing in the Lewis 9 x 15 foot LSWT. This program is described in detail.

Johns, Albert L.↗
NASA NTRS1989

Intelligent hypertext systems for aerospace engineering applications

This paper is a progress report on the utilization of AI technology for assisting users locating and understanding technical information in manuals used for planning and conducting wind tunnel test. The specific goal is to create an Intelligent Hypertext System (IHS) for wind tunnel testing which combines the computerized manual in the form of hypertext and an advisory system that stores experts' knowledge and experiences. A prototype IHS for conducting transonic wind tunnel testing has been constructed with limited knowledge base. The prototype is being evaluated by potential users.

Lo, Ching F.↗
DOE OSTI2013

Energy transitions in the early 21st Century

We are in the early stages of a long and complex transition from a global economy based on fossil energy to an economy based on low carbon renewable energy. However, fossil fuel resources are abundant and widely distributed, and they will remain the dominant source of primary energy for at least the next quarter century. In the United States, displacement of coal by natural gas for electric power generation has done more to reduce CO2 emissions than all new renewables combined, and this may occur globally for the next decade or two, even if the European Union does not take advantage of its large unconventional natural gas resources. Greater energy efficiency (not including the efficiencies associated with displacement of coal by gas) will also be more important than new renewables. Cost/benefit ratios are important for sustainability of the transition, and some energy efficiency technologies and displacement of coal by natural gas have lower cost/benefit ratios than wind power, solar power or biofuels. Money spent on the large scale deployment of wind, solar and especially biofuels would be better spent on research, development and demonstration of a broader suite of technologies that would support the energy transition, with a focus on improving the cost benefit ratios of already deployed technologies and developing alternatives. Advanced nuclear reactors, engineered geothermal systems, fossil fuel recovery coupled with CO2 sequestration and pre-combustion or post-combustion decarbonation of fossil fuels with geological CO2 sequestration are among the technologies that might be more cost effective than wind, solar or biofuels, and biofuels have serious adverse societal and environment consequences.

58 GEOSCIENCES↗
DOE OSTI2013

Michigan: Michigan's Clean Energy Resources and Economy [Brochure]

By harnessing its abundant supply of conventional hydroelectric power, biomass, and wind, Michigan is well on its way to meeting its goal, set by the 2008 Clean Renewable and Efficient Energy Act, of generating 10% of retail electricity from renewable sources by 2015. Renewable biomass accounted for 39% of renewable energy credits certified in Michigan between 2009 and 2011, thanks in part to Michigan’s 19 million acres of forest land. Small hydroelectric plants, landfill gas, and municipal solid waste are all important sources of renewable electricity in Michigan—together accounting for 34% of renewable energy credits during the same time period. Michigan also has significant undeveloped wind energy potential. Michigan also requires electric providers to develop and fund “energy optimization” programs aimed at reducing electricity consumption. Michigan is one of the few states to count efficiency as an eligible clean energy resource, awarding “energy optimization credits” for successfully reducing energy consumption. Energy optimization credits can be substituted for renewable energy credits. As of December 2009, all utility customers in Michigan are eligible to participate in at least one energy-efficiency program offered through a local utility, and aggregate statewide funding for energy optimization programs has more than tripled from $\$$67 million in 2009 to $\$$208 million in 2011. Michigan is becoming a center for the domestic advanced battery industry. Companies all along the battery supply chain cluster in the state and draw from a talented pool of scientists, engineers, and other skilled workers with decades of experience in the auto industry. Michigan’s geographic position makes the state an attractive site for wind industry manufacturing; 2010 counted 31 wind technology manufacturing facilities in the state.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS2014

Entry, Descent, and Landing with Propulsive Deceleration: Supersonic Retropropulsion Wind Tunnel Testing and Shock Phenomena

The future exploration of the Solar System will require innovations in transportation and the use of entry, descent, and landing (EDL) systems at many planetary landing sites. The cost of space missions has always been prohibitive, and using the natural planetary and planet's moon atmospheres for entry, and descent can reduce the cost, mass, and complexity of these missions. This paper will describe some of the EDL ideas for planetary entry and survey the overall technologies for EDL that may be attractive for future Solar System missions. Future EDL systems may include an inflatable decelerator for the initial atmospheric entry and an additional supersonic retropropulsion (SRP) rocket system for the final soft landing. A three engine retropropulsion configuration with a 2.5 in. diameter sphere-cone aeroshell model was tested in the NASA Glenn Research Center's 1- by 1-ft (1×1) Supersonic Wind Tunnel (SWT). The testing was conducted to identify potential blockage issues in the tunnel, and visualize the rocket flow and shock interactions during supersonic and hypersonic entry conditions. Earlier experimental testing of a 70deg Viking-like (sphere-cone) aeroshell was conducted as a baseline for testing of a SRP system. This baseline testing defined the flow field around the aeroshell and from this comparative baseline data, retropropulsion options will be assessed. Images and analyses from the SWT testing with 300- and 500-psia rocket engine chamber pressures are presented here. In addition, special topics of electromagnetic interference with retropropulsion induced shock waves and retropropulsion for Earth launched booster recovery are also addressed.

Palaszewski, Bryan↗
DOE OSTI2024

Predicting Instability and the Effect of Wind Loading on Single-Axis Trackers

As PV modules continue to trend toward larger, thinner, and more flexible forms they grow more susceptible to damage from dynamic wind loading. As a result, understanding the impact of wind on PV systems, particularly when mounted on solar-tracking hardware, and identifying robust, stable array layouts and stow strategies is becoming increasingly important for the PV community. In our ongoing DuraMAT project, we are developing an open-source software package, PVade (PV aerodynamic design engineering), to simulate the cascading fluid-structure interaction that occurs within solar-tracking arrays to enable researchers to test hardware, layout, and tracker control changes, leading to enhanced stability and a reduction in wind-driven damage. We will give an overview of the PVade software, highlighting recent user-interface and algorithm developments, before presenting the latest outcomes from our ongoing validation campaign in which we analyze and compare with experimental data obtained from a DuraMAT 1 project. From there, we will present simulated results from a larger, multi-row array and highlight relationships between varying tracker angles and stability as measured by different experimentally validated metrics.

fluid structure interaction↗