Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vehicle data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

Time-Resolved Observations of Precipitation Structure and Storm Intensity with a Constellation of Smallsats: Level-1 Radiance Algorithm Theoretical Basis Document

This Algorithm Theoretical Basis Document (ATBD) describes the theoretical background of the TROPICS native radiance calibration algorithms. It also includes TROPICS payload characteristics and the algorithm’s ancillary data (i.e., data coming from sources other than the TROPICS Space Vehicle). Details of the native radiance (i.e., Level-1a antenna temperatures and Level-1b brightness temperatures) data product format can be found in the TROPICS Data User’s Guide. This ATBD information on the pre-launch testing completed to verify the algorithm. The TROPICS Data User’s Guide will contain the post-launch radiance validation.

TROPICS↗
NASA NTRSDate not supplied

Evaluation of Heave Disturbance Rejection and Control Response Criteria on the Handling Qualities Evaluation of Urban Air Mobility (UAM) eVTOL Quadrotors Using the Vertical Motion Simulator

The first piloted handling qualities study of an urban air mobility (UAM) vehicle leveraging the Vertical Motion Simulator (VMS) at NASA Ames Research Center was conducted in Spring 2021. The VMS provides a unique capability to reduce risk by assessing and iterating control designs. Minimal sources currently exist to provide performance and handling qualities data for large, rotor speed-controlled vehicles outside of the software environment. The study compares multiple handling qualities performance configurations for rotor speed and blade pitch-controlled variants of a six-passenger quadrotor conceptual design model developed by the NASA Revolutionary Vertical Lift Technology (RVLT) Project. Additionally, both ADS-33 and a tailored set of performance standards (notionally representing the agility required of a UAM mission) are examined under conditions with and without light turbulence. Preliminary results did show significant variation in ratings based on the set of standards utilized, controller tuning to either Level 1 or boundary Level 1/ Level 2 conditions, and presence or lack of turbulence. A custom approach and landing maneuver was also designed to bring these evaluation tasks together in a more comprehensive application.

Handling Qualities↗
NASA NTRS2022

Using Trajectory Smoothness Metrics to Identify Drones in Radar Track Data

The identification of unmanned aircraft systems (UAS) using trajectory data is considered. Specifically, a number of smoothness metrics are proposed, which can be used to distinguish UAS from other aerial objects even when they are engaged in accelerative maneuvers (non-constant-velocity flight). The metrics are evaluated on a data set from a UAS sense-and-avoid field test, which contains track data of aerial objects recorded by a vehicle-board radar system during a flight test. The metrics are found to effectively differentiate UAS from other objects such as birds for this data set. In addition, an initial statistical performance analysis of one of the smoothness metrics is undertaken, using 15 data sets deriving from multiple flight tests. The smoothness metric is shown to identify the target UAS with 95% accuracy (95% true positive rate), while achieving a false positive rate of less than 9%.

Sandip Roy↗
NASA NTRS2022

A Rideshare Tensegrity Rover Concept to Explore Titan’s Lands and Oceans

The Tension Adjustable Network for Deploying Entry Membrane (TANDEM) concept is a phase II NASA Innovative Advanced Concepts (NIAC) project. One of the goals for this project was to extend the application of tensegrity-based rovers to a rideshare concept for a Titan mission. This report provides preliminary details of the TANDEM concept for Titan. System analyses of the entry vehicle were performed and compared to data from the Huygens mission to Titan. The entry aeroshell was based on Huygens and Stardust aeroshells. Modeling, simulation and design of the tensegrity deployment were performed using a nonlinear optimization form-finding algorithm. Lastly, a neuroevolution-based machine learning control strategy was applied, which produced efficient rolling locomotion gaits.

tensegrity↗
NASA NTRSDate not supplied

Ab Initio Electronic Structure Calculations of CNN for CN Excitation Studies

The CN molecule is an important contributor to radiative heat flux in shock layers around vehicles entering Titan’s atmosphere. Current data for heavy particle (de)excitation rate coefficients of CN leads to uncertainties in the population of CN in its first and second excited states. This in turn leads to uncertainties in the radiative heat flux predicted by Computational Fluid Dynamics (CFD) simulations of Titan atmospheric entry. This work performs ab initio electronic structure calculations of the CNN complex to create Potential Energy Surfaces (PESs) that correlate to the ground and first and second excited states of CN. Specifically, the state combinations of CN(X,A,B) + N(4S𝑜) correlate to six states of CNN (three Quintet A” and three Triplet A”). Initial calculations of these states suggest that heavy particle (de)excitation of CN by N atoms is likely to proceed through collinear geometries on triplet surfaces. Complete PESs will show all of the reaction pathways in detail, and will be used in nonadiabatic dynamics calculations to evaluate improved rate coefficients and reduce uncertainty in the radiative heat flux during Titan entry.

Eric C Geistfeld↗
NASA NTRSDate not supplied

Ab Initio Electronic Structure Calculations of CNN for CN Excitation Studies

The CN molecule is an important contributor to radiative heat flux in shock layers around vehicles entering Titan’s atmosphere. Current data for heavy particle (de)excitation rate coefficients of CN leads to uncertainties in the population of CN in its first and second excited states. This in turn leads to uncertainties in the radiative heat flux predicted by Computational Fluid Dynamics (CFD) simulations of Titan atmospheric entry. This work performs ab initio electronic structure calculations of the CNN complex to create Potential Energy Surfaces (PESs) that correlate to the ground and first and second excited states of CN. Specifically, the state combinations of CN(X,A,B) + N(4S𝑜) correlate to six states of CNN (three Quintet A” and three Triplet A”). Initial calculations of these states suggest that heavy particle (de)excitation of CN by N atoms is likely to proceed through collinear geometries on triplet surfaces. Complete PESs will show all of the reaction pathways in detail, and will be used in nonadiabatic dynamics calculations to evaluate improved rate coefficients and reduce uncertainty in the radiative heat flux during Titan entry.

Eric Geistfeld↗
DOE OSTI2020

2018 Renewable Energy Data Book

The 2018 Renewable Energy Data Book provides facts and figures on energy and electricity use, renewable electricity in the United States, global renewable energy development, wind power, solar power, geothermal power, biopower, hydropower, marine and hydrokinetic power, battery storage, hydrogen, renewable fuels, voluntary procurement and clean energy investment.

2018 data↗
DOE OSTI2020

Automated Vehicle Detection in a Nuclear Facility Using Low-Frequency Acoustic Sensors

This article presents an analysis of the method of construction and results for a classifier intended to identify vehicles using low-frequency acoustic data collected by a dis-tributed sensor network. This data is collected as part of a venture intended to explore data analytics and multisensor fusion techniques for the monitoring of activities at a test bed nuclear facility located at Oak Ridge National Laboratory in Oak Ridge, Tennessee. We describe the associated target signature and design a classifier based on a multilayer perceptron, followed by an analysis of its results. We discuss how overall accuracy is not the only consideration in constructing this classifier, and how for this application, it is actually desirable to operate at a lower level of accuracy in exchange for a reduction in the false alarm rate, as well as how this relates to the actual deployment of the classifier in practical use.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗
NASA NTRS2011

Ground Processing Affordability for Space Vehicles

Launch vehicles and most of their payloads spend the majority of their time on the ground. The cost of ground operations is very high. So, why so often is so little attention given to ground processing during development? The current global space industry and economic environment are driving more need for efficiencies to save time and money. Affordability and sustainability are more important now than ever. We can not continue to treat space vehicles as mere science projects. More RLV's (Reusable Launch Vehicles) are being developed for the gains of reusability which are not available for ELV's (Expendable Launch Vehicles). More human-rated vehicles are being developed, with the retirement of the Space Shuttles, and for a new global space race, yet these cost more than the many unmanned vehicles of today. We can learn many lessons on affordability from RLV's. DFO (Design for Operations) considers ground operations during design, development, and manufacturing-before the first flight. This is often minimized for space vehicles, but is very important. Vehicles are designed for launch and mission operations. You will not be able to do it again if it is too slow or costly to get there. Many times, technology changes faster than space products such that what is launched includes outdated features, thus reducing competitiveness. Ground operations must be considered for the full product Lifecycle, from concept to retirement. Once manufactured, launch vehicles along with their payloads and launch systems require a long path of processing before launch. Initial assembly and testing always discover problems to address. A solid integration program is essential to minimize these impacts, as was seen in the Constellation Ares I-X test rocket. For RLV's, landing/recovery and post-flight turnaround activities are performed. Multi-use vehicles require reconfiguration. MRO (Maintenance, Repair, and Overhaul) must be well-planned--- even for the unplanned problems. Defect limits and standard repairs need to be in-place as well as easily added. Many routine inspections and maintenance can be like an aircraft overhaul. Modifications and technology upgrades should be expected. Another factor affecting ground operations efficiency is trending. It is essential for RLV's, and also useful for ELV's which fly the same or similar models again. Good data analysis of technical and processing performance will determine fixes and improvements needed for safety, design, and future processing. Collecting such data on new or low-frequency vehicles is a challenge. Lessons can be learned from the Space Shuttle, or even the Concorde aircraft. For all of the above topics, efficient business systems must be established for comprehensive program management and good throughput. Drawings, specifications, and manuals for an entire launch vehicle are often in different formats from multiple vendors, plus they have proprietary constraints. Nonetheless, the integration team must ensure that all data needed is compatible and visible to each appropriate team member. Ground processing systems for scheduling, tracking, problem resolution, etc. must be well laid-out. The balance between COTS (commercial off the shelf) and custom software is difficult. Multiple customers, vendors, launch sites, and landing sites add to the complexity of efficient IT (Information Technology) tools.

Ingalls, John↗
DOE OSTI2022

Trajectory prediction dimensionality reduction for low-cost connected automated vehicle systems

Here, to facilitate low-cost connected automated vehicle (CAV) system development, this study proposes two interpretable dimensionality reduction techniques in vehicle trajectory prediction, i.e., the piecewise Taylor series approximation (PTA) and the piecewise Fourier series approximation (PFA), to lower computation complexity, reduce device investment, and decrease computation energy consumption. Two benchmarks are developed, the long short-term memory (LSTM)-based model without dimensionality reduction and the LSTM-based model with encoder-decoder (a widely used dimensionality reduction technique). Results show that the four predictions have similar accuracy, and the training time (proportional to computation energy consumption) of models with dimensionality reduction techniques is greatly reduced. The reduction is even more significant when PTA/PFA is used. Sensitivity analysis advises PFA/PTA parameter selections to reduce computation complexity without significant loss of prediction accuracy. Further, the robustness of the LSTM PTA/PFA is proven by the investigation of data noises.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRSDate not supplied

HIFiRE Flight 2 Unstart Reliability Analysis

The objective of this work was to assess the unstart reliability of the HIFiRE Flight 2 system. To do this, a quantification of margins and uncertainties framework was used for comparing model predictions of the predicted combustion induced shock location to the predicted last stable shock location within the isolator. Uncertainty sources included parametric uncertainty in the flight conditions, the heat release model, and turbulence modeling, as well as model verification errors. Additionally, an estimate of model-form uncertainty was established by comparing the model to measured ground test data. A computationally efficient non-intrusive polynomial chaos approach was used to propagate parametric uncertainty through the computational flu-ids dynamics models of both the ground test configuration and the flight vehicle. Compared to direct-connect ground test data, computational fluid dynamics predictions yielded about two duct heights of model-form uncertainty. This was applied to a prediction of flight vehicle unstart margin at the Mach 6.5 flight condition. Building up all of the computational model uncertainty, including parametric uncertainty, verification errors, and the determined model-form uncertainty, a 95% probability level based confidence ratio, or a ratio of total uncertainty to a statistical margin measure, was found to be 0.31 for the flight system.

Thomas K West↗
DOE OSTI2025

Topography, surface water distribution and subsurface structure in 2023 across an Arctic coastal tundra site near Utqiagvik, Alaska

Subsurface electrical resistivity tomography (ERT), active layer thickness measurements, photogrammetry, and topographic data were collected in September 2023 along a 475 m long, 20 m wide corridor that traverses various polygon types within the Barrow Environmental Observatory (BEO) on the Alaskan Arctic Coastal Plain, approximately 4 miles from the Beaufort Sea near Utqiaġvik, Alaska. These measurements were designed to assess decadal changes in surface water distribution, topography, and subsurface structure across this dynamic landscape. This archive contains the datasets acquired in 2023 and references to the datasets acquired previously at the same location. The ERT survey was conducted along the 475 m transect using 0.5 m electrode spacing and a roll-along acquisition strategy. Thaw layer thicknesses were measured with a tile probe along the same transect. Photogrammetry data were acquired using an unoccupied aerial vehicle (UAV) and were used to generate a digital elevation model and an RGB mosaic. A real-time kinematic (RTK) GPS was used to survey the ERT electrodes and the ground control points for the aerial imagery. The dataset contains 5 *.csv data files, 6 *.csv metadata files, and 6 *.tif files.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2016

Flight Analysis of an Autonomously Navigated Experimental Lander

First steps have been taken to qualify a family of parafoil systems capable of increasing the survivability and reusability of high-altitude balloon payloads. The research is motivated by the common risk facing balloon payloads where expensive flight hardware can often land in inaccessible areas that make them difficult or impossible to recover. The Autonomously Navigated Experimental Lander (ANGEL) flight test introduced a commercial Guided Parachute Aerial Delivery System (GPADS) to a previously untested environment at 108,000 feet Mean Sea Level (MSL) to determine its high-altitude survivability and capabilities. Following release, ANGEL descended under a drogue until approximately 25,000 feet, at which point the drogue was jettisoned and the main parachute was deployed, commencing navigation. Multiple data acquisition platforms were used to characterize the return-to-point technology performance and help determine its suitability for returning future scientific payloads ranging from 180 to 10,000 pounds to safer and more convenient landing locations. This report describes the test vehicle design, and summarizes the captured sensor data. Various post-flight analyses are used to quantify the systems performance, gondola load data, and serve as a reference point for subsequent missions.

Parafoil↗
DOE OSTI2025

A method for modeling battery-temperature-aware EV power profiles utilizing Next-Gen Profile data

With the expected increase in the number of electric vehicles (EVs) on the road in the coming years, it is important that analysis tools are capable of modeling and predicting the expected load on the power grid due to both individual EV charging sessions as well as large populations of vehicles. To do this accurately, the power profile of an EV charge session must be accurately modeled, including for scenarios where the temperature is above or below the ideal, and also take into account the nuances of manufacturer charging preferences. This paper introduces a method that utilizes the data in the Next-Gen Profile (NGP) data collection project to build a model of EV charging that takes into account the variations in charging power that occur due to off-nominal battery temperature and manufacturer preferences that limit power due to cold temperatures or high battery state-of-charge.

24 - POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS2008

Ares I-X Flight Test - On the Fast Track to the Future

In less than two years, the National Aeronautics and Space Administration (NASA) will launch the Ares I-X mission. This will be the first flight of the Ares I crew launch vehicle, which, together with the Ares V cargo launch vehicle, will send humans to the Moon and beyond. Personnel from the Ares I-X Mission Management Office (MMO) are finalizing designs and fabricating vehicle hardware for an April 2009 launch. Ares I-X will be a suborbital development flight test that will gather critical data about the flight dynamics of the integrated launch vehicle stack; understand how to control its roll during flight; better characterize the severe stage separation environments that the upper stage engine will experience during future flights; and demonstrate the first stage recovery system. NASA also will modify the launch infrastructure and ground and mission operations. The Ares I-X Flight Test Vehicle (FTV) will incorporate flight and mockup hardware similar in mass and weight to the operational vehicle. It will be powered by a four-segment Solid Rocket Booster (SRB), which is currently in Shuttle inventory, and will include a fifth spacer segment and new forward structures to make the booster approximately the same size and weight as the five-segment SRB. The Ares I-X flight profile will closely approximate the flight conditions that the Ares I will experience through Mach 4.5, up to approximately130,OOO feet and through maximum dynamic pressure ("Max Q") of approximately 800 pounds per square foot. Data from the Ares I-X flight will support the Ares I Critical Design Review (CDR), scheduled for 2010. Work continues on Ares I-X design and hardware fabrication. All of the individual elements are undergoing CDRs, followed by an integrated vehicle CDR in March 2008. The various hardware elements are on schedule to begin deliveries to Kennedy Space Center (KSC) in early September 2008.

Davis, Stephan R.↗
NASA NTRS1981

Comparison of analysis and flight test data for a drone aircraft with active flutter suppression

A drone aircraft equipped with an active flutter suppression system is considered with emphasis on the comparison of modal dampings and frequencies as a function of Mach number. Results are presented for both symmetric and antisymmetric motion with flutter suppression off. Only symmetric results are given for flutter suppression on. Frequency response functions of the vehicle are presented from both flight test data and analysis. The analysis correlation is improved by using an empirical aerodynamic correction factor which is proportional to the ratio of experimental to analytical steady-state lift curve slope. The mathematical models are included and existing analytical techniques are described as well as an alternative analytical technique for obtaining closed-loop results.

Newsom, J. R.↗
NASA NTRS2008

Visualization Component of Vehicle Health Decision Support System

The visualization front-end of a Decision Support System (DSS) also includes an analysis engine linked to vehicle telemetry, and a database of learned models for known behaviors. Because the display is graphical rather than text-based, the summarization it provides has a greater information density on one screen for evaluation by a flight controller.This tool provides a system-level visualization of the state of a vehicle, and drill-down capability for more details and interfaces to separate analysis algorithms and sensor data streams. The system-level view is a 3D rendering of the vehicle, with sensors represented as icons, tied to appropriate positions within the vehicle body and colored to indicate sensor state (e.g., normal, warning, anomalous state, etc.). The sensor data is received via an Information Sharing Protocol (ISP) client that connects to an external server for real-time telemetry. Users can interactively pan, zoom, and rotate this 3D view, as well as select sensors for a detail plot of the associated time series data. Subsets of the plotted data can be selected and sent to an external analysis engine to either search for a similar time series in an historical database, or to detect anomalous events. The system overview and plotting capabilities are completely general in that they can be applied to any vehicle instrumented with a collection of sensors. This visualization component can interface with the ISP for data streams used by NASA s Mission Control Center at Johnson Space Center. In addition, it can connect to, and display results from, separate analysis engine components that identify anomalies or that search for past instances of similar behavior. This software supports NASA's Software, Intelligent Systems, and Modeling element in the Exploration Systems Research and Technology Program by augmenting the capability of human flight controllers to make correct decisions, thus increasing safety and reliability. It was designed specifically as a tool for NASA's flight controllers to monitor the International Space Station and a future Crew Exploration Vehicle.

Jacob, Joseph↗
NASA NTRS2006

NASA Crew Launch Vehicle Approach Builds on Lessons from Past and Present Missions

The United States Vision for Space Exploration, announced in January 2004, outlines the National Aeronautics and Space Administration's (NASA) strategic goals and objectives, including retiring the Space Shuttle and replacing it with a new human-rated system suitable for missions to the Moon and Mars. The Crew Exploration Vehicle (CEV) that the new Crew Launch Vehicle (CLV) lofts into space early next decade will initially ferry astronauts to the International Space Station and be capable of carrying crews back to lunar orbit and of supporting missions to Mars orbit. NASA is using its extensive experience gained from past and ongoing launch vehicle programs to maximize the CLV system design approach, with the objective of reducing total lifecycle costs through operational efficiencies. To provide in-depth data for selecting this follow-on launch vehicle, the Exploration Systems Architecture Study was conducted during the summer of 2005, following the confirmation of the new NASA Administrator. A team of aerospace subject matter experts used technical, budget, and schedule objectives to analyze a number of potential launch systems, with a focus on human rating for exploration missions. The results showed that a variant of the Space Shuttle, utilizing the reusable Solid Rocket Booster as the first stage, along with a new upper stage that uses a derivative of the RS-25 Space Shuttle Main Engine to deliver 25 metric tons to low-Earth orbit, was the best choice to reduce the risks associated with fielding a new system in a timely manner. The CLV Project, managed by the Exploration Launch Office located at NASA's Marshall Space Flight Center, is leading the design, development, testing, and operation of this new human-rated system. The CLV Project works closely with the Space Shuttle Program to transition hardware, infrastructure, and workforce assets to the new launch system . leveraging a wealth of lessons learned from Shuttle operations. The CL V is being designed to reduce costs through a number of methods, ranging from validating requirements to conducting trades studies against the concept design. Innovations such as automated processing will build on lessons learned from the Shuttle, other launch systems, Department of Defense operations experience, and subscale flight tests such as the Delta Clipper-Experimental Advanced (DCXA) vehicle operations that utilized minimal touch labor, automated cryogen ic propellant loading , and an 8-hour turnaround for a cryogenic propulsion system. For the CLV, the results of hazard analyses are contributing to an integrated vehicle health monitoring system that will troubleshoot anomalies and determine which ones can be solved without human intervention. Such advances will help streamline the mission operations process for pilots and ground controllers alike. In fiscal year 2005, NASA invested approximately $4.5 billion of its $16 bill ion budget on the Space Shuttle. The ultimate goal of the CLV Project is to deliver a safe, reliable system designed to minimize lifecycle costs so that NASA's budget can be invested in missions of scientific discovery. Lessons learned from developing the CLV will be applied to the growth path for future systems, including a heavy lift launch vehicle.

Dumbacher, Daniel L.↗