Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Exchange Coupling Nanophase Fe-Pd Ferromagnets Through Solid State Transformation

This study continues previous work on off stoichiometric Fe-Pd alloys using a combined reaction strategy during thermomechanical processing [1,2]. Severe plastic deformation of the initial disordered fcc gamma phase ( ), followed by heat treatment in the two phase field produces a nano-composite ferromagnet comprised of soft alpha-Fe/ferrite in a high-anisotropy L10 FePd matrix. The length scale and morphology of the transformation products have been characterized using x-ray diffraction, and scanning and transmission electron microscopy. The transformed microstructures exhibit strong texture retention similar to the stoichiometric alloy suggesting a massive ordering mode. The alloy has shown a proclivity to exchange couple at a length scale not in agreement with proposed theories of exchange coupling [3,4]. The magnetic properties were measured using standard vibrating sample magnetometry (VSM). This research has been supported by the National Science Foundation (NSF-DMR).

36 MATERIALS SCIENCE↗

Nonequilibrium Phase Transformation and Particle Shape Effect in LiFePO4 Materials for Li-Ion Batteries

The nonequilibrium phase transformation and particle shape effects in LiFePO4 materials of Li-ion batteries are explored in this work. A continuum model employing the mushy-zone (MZ) approach, accounting for sluggish Li diffusion across the two-phase boundary, has been developed to study the kinetically-induced nonequilibrium phenomenon in Li-ion batteries. A theoretical analysis is presented to show that the nonequilibrium miscibility gap expands and shifts to higher Li composition at high discharge rates, due to insufficient compositional readjustments at the two-phase boundary. Furthermore, critical effects of particle shape on nonequilibrium phase transformation and discharge capacity have been discovered by the model.

25 ENERGY STORAGE↗

Removal and Transformation of Sulfur Species During Regeneration of Poisoned Nickel Biomass Conditioning Catalysts

Sulfur K-edge XANES was used to monitor sulfur species transforming from sulfides to sulfates during steam + air regeneration on a Ni/Mg/K/Al{sub 2}O{sub 3} catalyst used to condition biomass-derived syngas. The catalyst was tested for multiple reaction/regeneration cycles. Post-reaction samples showed the presence of sulfides on the H{sub 2}S-poisoned nickel catalyst. Although some gaseous sulfur species were observed to leave the catalyst bed during regeneration, sulfur remained on the catalyst and a transformation from sulfides to sulfates was observed. The subsequent H{sub 2} reduction led to a partial reduction of sulfates back to sulfides. A proposed reaction sequence is presented and recommended regeneration strategies are discussed.

09 BIOMASS FUELS↗

Scaling of the Longitudinal Electric Field and Transformer Ratio in a Nonlinear Plasma Wakefield Accelerator

The scaling of the two important figures of merit, the transformer ratio T and the longitudinal electric field E{sub z}, with the peak drive-bunch current I{sub p}, in a nonlinear plasma wakefield accelerator is presented for the first time. The longitudinal field scales as I{sub P}{sup 0.623{+-}0.007}, in good agreement with nonlinear wakefield theory ({approx}I{sub P}{sup 0.5}), while the unloaded transformer ratio is shown to be greater than unity and scales weakly with the bunch current. The effect of bunch head erosion on both parameters is also discussed.

43 PARTICLE ACCELERATORS↗

Optimization of Drive-Bunch Current Profile for Enhanced Transformer Ratio in Beam-Driven Acceleration Techniques

In recent years, wakefield acceleration has gained attention due to its high acceleration gradients and cost effectiveness. In beam-driven wakefield acceleration, a critical parameter to optimize is the transformer ratio. It has been shown that current shaping of electron beams allows for enhanced (> 2) transformer ratios. In this paper we present the optimization of the pulse shape of the drive bunch for dielectric-wakefield acceleration.

43 PARTICLE ACCELERATORS↗

Market Transformation (Fuel Cells Technologies Program Factsheet)

The Fuel Cell Technologies Market Transformation activity is The U.S. Department of Energy’s (DOE’s) hydrogen and fuel cell technologies deployment effort. Market Transformation is based on the concept that federal support can validate the economic and environmental benefits of fuel cell technologies, and federal acquisitions can help reduce costs through economies of scale and establish the domestic manufacturing base needed to support widespread commercialization.

fact sheet↗

TRANSFORM: Catalyzing the Transition to a 21st Century Energy Economy - JISEA 2019 Annual Report

The Joint Institute for Strategic Energy Analysis (JISEA) provides leading-edge, objective, high impact research and analysis to guide transformative global energy investment and policy decisions. Through strategic insights and worldwide dialogue, JISEA explores the intersections of the environmental, social, financial, technological, and political elements of energy systems on the path to a clean energy economy. JISEA's work informs innovative solutions that advance the goals of sustainability, economic prosperity, and resilience. JISEA research and analysis provided decision-making support to industry, the financial sector, and government with a focus on the following strategic areas: Energy Systems Integration and Transformation, Energy in the Global Water-Food Nexus, and Circular Energy Economy.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

FY20 NREL Overview: Transforming Energy

At the National Renewable Energy Laboratory (NREL), we are transforming today’s energy challenges into tomorrow’s solutions. Our scientific research and technological innovation will shape a highly efficient and resilient energy future. Our world is transforming around us with energy solutions becoming cleaner, cheaper, renewable, and more resilient. As the population grows and new technologies and devices are added to the grid, we must examine the effects and enhance security within our most critical systems. As environmental threats expand and human demands on urban centers increase, we need more sustainable and efficient ways of generating energy that considers resource competition worldwide. We need our grid to be adaptive, autonomous, and responsive. NREL continues to anticipate these challenges, offering solutions through research, innovation, analysis, partners, and people. We are building the foundation of tomorrow’s energy landscape and inspiring the economic growth of the future.

energy security↗

Women in Power System Transformation

The United States Agency for International Development (USAID) – National Renewable Energy Laboratory (NREL) Partnership and the Global Power System Transformation (G-PST) Consortium joined together to launch the Women in Power System Transformation initiative. This initiative aims to increase gender equality in the global transition to clean energy by providing in-depth technical capacity building for women in emerging economies, so they are prepared to excel in science and engineering professional roles in the rapidly evolving power sector.

energy equity↗

Y-12 National Security Complex's Sustainable Recovery and Transformation - 12420

American Recovery and Reinvestment Act (ARRA) funds were used at the Y-12 National Security Complex (Y-12) to remove legacy materials from large contaminated excess facilities in order to prepare the facilities for demolition, demolish five excess buildings, and clean up sources of environmental contamination. The legacy materials and buildings presented many challenges and the potential hazards included depleted uranium and other radiological contaminants, lead, polychlorinated biphenyls, Freon, mold, mildew, asbestos, beryllium and mercury. Y-12 project teams have integrated sustainable waste management practices into each of the seven ARRA projects. The ARRA clean up efforts have resulted in the reduction of potential environmental, health, and safety risks posed by the excess facilities and sources of environmental contamination. Y-12's ARRA project teams focused on completing the activities in a sustainable, timely and safe manner. The site utilized a systematic material disposition evaluation process to ensure that materials were not automatically dis-positioned as waste. ARRA projects have recycled or reused over 1.3 million pounds of materials while preventing over 3 million vehicle miles traveled for waste disposal. Y-12 ARRA projects have worked over 2 million safe work hours without a lost time injury. The site has already begun to beneficially reuse land cleared by ARRA project activities to support sustainable transformation efforts. The Y-12 ARRA project activities have demonstrated that large complex projects can be completed sustainably and safely while maintaining an aggressive schedule. Through careful planning and execution, ARRA projects at the site have sustainably reduced the potential environmental, health, and safety risks posed to site employees and the community by the excess facilities and sources of environmental contamination. Y-12's systematic material disposition process ensured that materials were not automatically assumed to be wastes and facilitated the evaluation of all unneeded materials for reuse or recycling. The site's pervasive pollution prevention culture is reflected in the recycling or reuse of over 1.3 million pounds of materials by the ARRA project teams. While the disposal of a large volume of ARRA wastes could not be avoided, the projects were able to reduce the local and national impacts of waste transportation and disposal through careful planning and efficient execution. The site has conserved natural resources through the preservation and beneficial reuse of materials and land cleared by ARRA activities. Y-12 has taken steps to preserve its history as the site undergoes a sustainable and safe transformation for the future. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Introduction of a Variable Inductance Transformer for the Design of Resonant Power Converters

Magnetic integration is a hot topic in power electronics that concerns the use of a transformer’s leakage and magnetizing inductances purposefully in isolated power electronic converters, thereby giving the opportunity to save the cost and footprint of any additional inductor. This is of prime interest, especially in CLLLC resonant converters which require up to three inductors. For a complete integration of these inductances, the concept of a variable inductance transformer (VIT) is introduced in this thesis. A VIT is an adaptive magnetic structure that facilitates an easy adjustment of both magnetizing and leakage inductances to meet their desired values. However, for a more promising design, an accurate estimation of these inductances is necessary. While the evaluation of magnetizing inductance is quite straightforward, the calculation of leakage inductance is rather convoluted, because the leakage inductance is influenced by both the winding layout and the operating frequency. In this thesis, three new semi-analytical methods for calculating the frequency-independent leakage inductance, and a novel semi-analytical method for evaluating the frequency-dependent leakage inductance are proposed. These methods can calculate the respective leakage inductances of a VIT within an outstanding ±5% uncertainty. Finally, a bidirectional CLLLC resonant dc-dc converter is investigated for the constant current constant voltage (CCCV) charging of the next-generation 900 V traction battery of an electric vehicle. A new voltage gain equation is derived for designing the CLLLC resonant tank, and a small-signal model is presented for designing the variable-frequency feedback controller. Furthermore, a new methodology to design a VIT is developed to overcome the challenges associated with small coupling coefficients and guarantee a complete magnetic integration of the tank inductances. All theoretical results presented herein are verified through simulations and experiments performed on hardware prototypes designed in the lab.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Non-Stationary Power System Forced Oscillation Analysis using Synchrosqueezing Transform

Non-stationary forced oscillations (FOs) have been observed in power system operations. However, most detection methods assume that the frequency of FOs is stationary. In this paper, we present a methodology for the analysis of nonstationary FOs. Firstly, Fourier synchrosqueezing transform (FSST) is used to provide a concentrated time-frequency representation of the signals that allows identification and retrieval of non-stationary signal components. To continue, the Dissipating Energy Flow (DEF) method is applied to the extracted components to locate the source of forced oscillations. The methodology is tested using simulated as well as real PMU data. In conclusion, the results show that the proposed FSST-based signal decomposition provides a systematic framework for the application of DEF Method to non-stationary FOs.

42 ENGINEERING↗

FOURIER TRANSFORM EMISSION SPECTROSCOPY OF THE A {sup 2}{Pi}-X {sup 2}{Sigma}{sup +} (RED) SYSTEM OF {sup 13}C{sup 14}N

Emission spectra of the A {sup 2{Pi}}-X {sup 2}{Sigma}{sup +} transition (red system) of {sup 13}C{sup 14}N have been measured in the 4000-15,000 cm{sup -1} region using the Fourier transform spectrometer associated with the McMath-Pierce Solar Telescope of the National Solar Observatory. The {sup 13}C{sup 14}N free radical was produced in microwave discharge of a mixture of {sup 13}CH{sub 4} and {sup 14}N{sub 2}. Rotational analysis of 22 vibrational bands involving vibrational levels up to v' = 8 and v'' = 5 of the excited and ground states has been obtained and much improved spectroscopic constants have been determined. An experimental line list and calculated term values are provided. The results of the present analysis are useful for the identification of {sup 13}C{sup 14}N lines in late-type stars in the red and near-infrared spectral regions.

79 ASTRONOMY AND ASTROPHYSICS↗

THE INFRARED SPECTRUM OF URANIUM HOLLOW CATHODE LAMPS FROM 850 nm to 4000 nm: WAVENUMBERS AND LINE IDENTIFICATIONS FROM FOURIER TRANSFORM SPECTRA

We provide new measurements of wavenumbers and line identifications of 10, 100 U I and U II near-infrared (NIR) emission lines between 2500 cm{sup -1} and 12, 000 cm{sup -1} (4000-850 nm) using archival Fourier transform spectrometer spectra from the National Solar Observatory. This line list includes isolated uranium lines in the Y, J, H, K, and L bands (0.9-1.1 {mu}m, 1.2-1.35 {mu}m, 1.5-1.65 {mu}m, 2.0-2.4 {mu}m, and 3.0-4.0 {mu}m, respectively), and provides six times as many calibration lines as thorium in the NIR spectral range. The line lists we provide enable inexpensive, commercially available uranium hollow cathode lamps to be used for high-precision wavelength calibration of existing and future high-resolution NIR spectrographs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Time-resolved Fourier-transform infrared emission spectroscopy of Au in the 1800-4000-cm{sup -1} region: Rydberg transitions

Time-resolved Fourier-transform infrared spectroscopy was applied for observations of the emission arising after irradiation of a Au target with a pulsed nanosecond ArF (lambda=193 nm) laser. A high-repetition-rate laser (1.0 kHz) with an output energy of 15 mJ was focused on a rotating metal target inside a vacuum chamber (average pressure 10{sup -2} Torr). The infrared emission spectra were observed in the 1800-4000cm{sup -1} spectral region with a time profile showing maximum emission intensity in 9-11 mus after a laser shot. Seven prominent lines are reported; most of them are identified as being due to transitions between low Rydberg nl states of Au with n=5-10 and l=0-3. An alternative identification (6f{sub 5/2}->7d{sub 3/2}) is given for the 2518.489cm{sup -1} line previously classified as 8d{sub 5/2}->5f{sub 5/2}. On the basis of the measured lines, three f levels of the Au atom are reported and revised values are given for six other levels.

74 ATOMIC AND MOLECULAR PHYSICS↗

Noise figure of amplified dispersive Fourier transformation

Amplified dispersive Fourier transformation (ADFT) is a powerful tool for fast real-time spectroscopy as it overcomes the limitations of traditional optical spectrometers. ADFT maps the spectrum of an optical pulse into a temporal waveform using group-velocity dispersion and simultaneously amplifies it in the optical domain. It greatly simplifies spectroscopy by replacing the diffraction grating and detector array in the conventional spectrometer with a dispersive fiber and single-pixel photodetector, enabling ultrafast real-time spectroscopic measurements. Following our earlier work on the theory of ADFT, here we study the effect of noise on ADFT. We derive the noise figure of ADFT and discuss its dependence on various parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Radio-Frequency Rapid Thermal Processing Enabling Spatial Phase Transformation and Nanocrystallization of Soft Magnetic Amorphous Alloys

Thermal processing of soft magnetic amorphous and nanocrystalline alloys is explored under the influence of radio-frequency induction-heating techniques. Direct induction-heating concepts based on longitudinal and transverse flux heating are examined and the details of electromagnetic fields interaction with metallic strips are discussed by analytical calculations as well as finite element analysis. Initial experimental results confirming spatial control of phase transformations and nanocrystallization within a single strip of Finemet Fe-based amorphous ribbons are reported. Here, the degree to which primary and secondary crystallization temperature are achieved depends on the spacing between the ribbon relative to the induction coil as well as the coil design and configuration. For transverse coil configurations, the local temperature and therefore microstructural evolution is different across the lateral dimension of processed ribbons, with reduced gap sizes producing enhanced peak temperatures and larger temperature distributions with greater spatial variation in microstructure. In addition, indirect susceptor-based induction heating under tension is performed and the impact of microstructure is demonstrated. Herein, potential for exploiting spatially optimized phase transformations is illustrated through electromagnetic field–assisted processing in a scalable manufacturing process with amorphous and nanocrystalline soft magnetic alloys.

36 MATERIALS SCIENCE↗