Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “time integrator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Recent developments in gravity gradiometry from the Space-Shuttle-borne tethered satellite system

This paper describes the current development of a noncryogenic gravity gradiometer for future use on board the tethered satellite system (TSS). The paper also proposes a way of testing a single-axis prototype of such an instrument that makes use of the free-fall technique in vacuum. This gravity gradiometer has a design sensitivity of the order of 0.01 EU in 10-s integration time. Because of the small size and light weight, a noncryogenic gravity gradiometer is a valid candidate to fit the limited accommodation capability of the TSS deployed from the Shuttle and maintained, for several days, at an altitude of 120-130 km. This unique capability improves the resolution and accuracy achievable in reconstructing the earth gravity field, in particular at short wavelengths. A preliminary analysis of the dynamics of the TSS satellite indicates the potential of such satellite as a low-altitude research platform for gravity gradiometry.

Lorenzini, Enrico C.↗

A conservative approach for flow field calculations on multiple grids

In the computation of flow fields about complex configurations, it is very difficult to construct body-fitted coordinate systems. An alternative approach is to use several grids at once, each of which is generated independently. This procedure is called the 'multiple grids' or 'zonal grids' approach and its applications are investigated in this study. The method follows the conservative approach and provides conservation of fluxes at grid interfaces. The Euler equations are solved numerically on such grids for various configurations. The numerical scheme used is the finite-volume technique with a three-stage Runge-Kutta time integration. The code is vectorized and programmed to run on the CDC VPS-32 computer. Some steady state solutions of the Euler equations are presented and discussed.

Kathong, M.↗

Magnetic modulation of solar luminosity by photospheric activity

The behavior of slow changes in solar irradiance S is studied using measurements obtained with radiometers on the SMM and Nimbus 7 spacecraft. The general downtrend in the radiometer readings is examined by removing the influence of sunspot blocking and comparing the residual irradiance variations with changes in facular and network radiation as indicated by the He I 10830 and CaK indices. The time-integrated sunspot and facular contributions to irradiance variation and its implications for active region energetics are considered. The magnetic activity modulation of S over solar cycle 21 from daily data on sunspot blocking and the He I index are simulated, and this simulated irradiance variation is compared to radiometry since 1978. Other recent evidence for an irradiance modulation by magnetic activity is discussed.

Foukal, P.↗

TDRSS OVLBI experiment - Data correlation and results

The use of an orbiting antenna in a VLBI experiment complicates the data correlation, due to the spacecraft motion and the presence of the satellite-to-ground link. For this experiment, using a TDRSS satellite, a multistep method was used to calculate delay and phase for correlation and fringe-fitting. Data from three sources: 1510-089, NRAO 530 (1730-130), and 174l-038 were successfully correlated. The maximum projected baseline achieved was 1.4 earth diameters, for NRAO 530, with baselines longer than one earth diameter obtained for all three sources. Fringe visibilities for the maximum projected baselines were: 0.15 (1510-089), 0.05 (NRAO 530), and 0.50 (1741-038). The coherence of baselines to the orbiting antenna was 84 percent for 700 seconds. For a dedicated orbiting VLBI observatory (e.g., QUASAT), excellent coherence can be expected for integration times of several hundred seconds and observing frequencies as high as 20-30 GHz.

Linfield, R. P.↗

Nearly-grazing optimal trajectories for noncoplanar, aeroassisted orbital transfer

This paper discusses aeroassisted orbital transfer maneuvers under the assumption that the terminal orbital inclinations are different. Both GEO-to-LEO and LEO-to-LEO transfers are considered in connection with a spacecraft which is controlled during the atmospheric pass via the angle of attack and the angle of bank. Within the framework of classical optimal control, the following problems are studied: the minimization of the total characteristic velocity (P1); the minimization of the time integral of the square of the path inclination (P5); and the minimization of the peak heating rate (Q1). Numerical solutions are obtained by means of the sequential gradient-restoration logarithm for optimal control problems under the conditions that, for the problem (P1), the plane change components are optimized, while for the problems (P5) and (Q1), the plane change components are kept at the levels determined for problem (P1). The engineering implications of the solutions are discussed, in order to determine the most useful solutions in the light of energy requirements and heat transfer requirements.

Miele, A.↗

Frequency domain solutions to multi-degree-of-freedom, dry friction damped systems

Dry friction damping has been considered as a means of increasing the passive damping of a variety of systems including large space structures and turbomachinery blades. However, dry friction is highly nonlinear, and hence, analytical investigations are difficult to perform. Here, a multiharmonic, frequency domain solution technique is developed and applied to a multi-degree-of-freedom, dry friction damped system. It is seen that the multiharmonic method is more accurate than traditional, one-harmonic solution methods. The method also compares favorably with time integration. Finally, comparisons are made with experimental results.

Ferri, A. A.↗

Algorithm For Optimal Control Of Large Structures

Cost of computation appears competitive with other methods. Problem to compute optimal control of forced response of structure with n degrees of freedom identified in terms of smaller number, r, of vibrational modes. Article begins with Hamilton-Jacobi formulation of mechanics and use of quadratic cost functional. Complexity reduced by alternative approach in which quadratic cost functional expressed in terms of control variables only. Leads to iterative solution of second-order time-integral matrix Volterra equation of second kind containing optimal control vector. Cost of algorithm, measured in terms of number of computations required, is of order of, or less than, cost of prior algoritms applied to similar problems.

Salama, Moktar A.↗

Digital Signal Processor For GPS Receivers

Three innovative components combined to produce all-digital signal processor with superior characteristics: outstanding accuracy, high-dynamics tracking, versatile integration times, lower loss-of-lock signal strengths, and infrequent cycle slips. Three components are digital chip advancer, digital carrier downconverter and code correlator, and digital tracking processor. All-digital signal processor intended for use in receivers of Global Positioning System (GPS) for geodesy, geodynamics, high-dynamics tracking, and ionospheric calibration.

Thomas, J. B.↗

A fibre optic, four channel comparative photometer

Development of a four channel comparative photometer is described. Tests have shown that it is stable from night to night and is capable of working in very poor sky conditions. Even when the sky conditions are so poor that stars are barely visible, light curves can still be obtained with an r.m.s. value of 0.0016 mag., provided that integration times that are long compared with the transparancy changes are possible.

Walker, E. N.↗

Analog-to-digital conversion techniques for precision photometry

Three types of analog-to-digital converters are described: parallel, successive-approximation, and integrating. The functioning of comparators and sample-and-hold amplifiers is explained. Differential and integral linearity are defined, and good and bad examples are illustrated. The applicability and relative advantages of the three types of converters for precision astronomical photometric measurements are discussed. For most measurements, integral linearity is more important than differential linearity. Successive-approximation converters should be used with multielement solid state detectors because of their high speed, but dual slope integrating converters may be superior for use with single element solid state detectors where speed of digitization is not a factor. In all cases, the input signal should be tailored so that they occupy the upper part of the converter's dynamic range; this can be achieved by providing adjustable gain, or better by varying the integration time of the observation if possible.

Opal, Chet B.↗

Solar-flare shielding with Regolith at a lunar-base site

The Langley high energy nucleon transport computer code BRYNTRN is used to predict time-integrated radiation dose levels at the lunar surface due to high proton flux from solar flares. The study addresses the shielding requirements for candidate lunar habitat configurations necessary to protect crew members from these large and unpredictable radiation fluxes. Three solar proton events have been analyzed, and variations in radiation intensity in a shield medium due to the various primary particle energy distributions are predicted. Radiation dose predictions are made for various slab thicknesses of a lunar soil model. Results are also presented in the form of dose patterns within specific habitat configurations shielded with lunar material.

Nealy, John E.↗

The role of thermal and lubricant boundary layers in the transient thermal analysis of spur gears

An improved convection heat-transfer model has been developed for the prediction of the transient tooth surface temperature of spur gears. The dissipative quality of the lubricating fluid is shown to be limited to the capacity extent of the thermal boundary layer. This phenomenon can be of significance in the determination of the thermal limit of gears accelerating to the point where gear scoring occurs. Steady-state temperature prediction is improved considerably through the use of a variable integration time step that substantially reduces computer time. Computer-generated plots of temperature contours enable the user to animate the propagation of the thermal wave as the gears come into and out of contact, thus contributing to better understanding of this complex problem. This model has a much better capability at predicting gear-tooth temperatures than previous models.

El-Bayoumy, L. E.↗

Two-way coherent Doppler error due to solar corona

Two-way coherent Doppler errors resulting from phase scintillations induced on the uplink by the solar corona are considered. It is shown that this error can be estimated by taking statistics on the differential Doppler measurements. Typical estimates for the error are given for four Sun-Earth-probe angles and for integration times ranging from 1 second to 1 minute. These results are based on data collected during the 1985 Voyager 2 conjunction.

Kinman, P. W.↗

Parallel processors and nonlinear structural dynamics algorithms and software

A nonlinear structural dynamics finite element program was developed to run on a shared memory multiprocessor with pipeline processors. The program, WHAMS, was used as a framework for this work. The program employs explicit time integration and has the capability to handle both the nonlinear material behavior and large displacement response of 3-D structures. The elasto-plastic material model uses an isotropic strain hardening law which is input as a piecewise linear function. Geometric nonlinearities are handled by a corotational formulation in which a coordinate system is embedded at the integration point of each element. Currently, the program has an element library consisting of a beam element based on Euler-Bernoulli theory and trianglar and quadrilateral plate element based on Mindlin theory.

Belytschko, Ted↗

Theoretical model for VITA-educed coherent structures in the wall region of a turbulent boundary layer

Experiments on wall-bounded shear flows (channel flows and boundary layers) have indicated that the turbulence in the region close to the wall exhibits a characteristic intermittently formed pattern of coherent structures. For a quantitative study of coherent structures it is necessary to make use of conditional sampling. One particularly successful sampling technique is the Variable Integration Time Averaging technique (VITA) first explored by Blackwelder and Kaplan (1976). In this, an event is assumed to occur when the short time variance exceeds a certain threshold multiple of the mean square signal. The analysis presented removes some assumptions in the earlier models in that the effects of pressure and viscosity are taken into account in an approximation based on the assumption that the near-wall structures are highly elongated in the streamwise direction. The appropriateness of this is suggested by the observations but is also self consistent with the results of the model which show that the streamwise dimension of the structure grows with time, so that the approximation should improve with the age of the structure.

Landahl, Marten T.↗

Explicit, implicit, and hybrid methods

Time integration methods can be separated into two groups: explicit and implicit. Methods which do not involve the solution of any algebraic equations are called explicit, while those that require the solution of equations are called implicit. The relative advantages and disadvantages of explicit and implicit methods are summarized. The major trend in the past decade of research was to use hybrization methods to take advantage of the complementary nature of the positive attributes of explicit and implicit integration. These trends are briefly discussed.

Belytschko, T.↗

A conservative approach for flow field calculations on multiple grids

In the computation of flow fields about complex configurations, it is very difficult to construct body-fitted coordinate systems. An alternative approach is to use several grids at once, each of which is generated independently. This procedure is called the multiple grids or zonal grids approach and its applications are investigated in this study. The method follows the conservative approach and provides conservation of fluxes at grid interfaces. The Euler equations are solved numerically on such grids for various configurations. The numerical scheme used is the finite-volume technique with a three-state Runge-Kutta time integration. The code is vectorized and programmed to run on the CDC VPS-32 computer. Some steady state solutions of the Euler equations are presented and discussed.

Kathong, Monchai↗

LaRC computational dynamics overview

Present research centers on the development of advanced computational methods for transient simulation analyses. Aircraft, launch vehicles and space structure components are potential applications, but primary focus is presently on large space structures. There are both in-house and out-of-house activities. The in-house activity centers around the development of a multibody simulation tool for truss-like structures called LATDYN for Large Angle Transient DYNamics. Multibody analysis involves articulation of structural components as well as robotic maneuvers. These items are necessary for construction (erection or deployment) of large space structures in orbit and the carrying out of certain operations on board the space station. Thus, part of the in-house activity involves the development of methods which treat the changing mass, stiffness and constraints associated with articulating systems. The out-of-house activity involves subcycling, development of large deformation/motion beam formulation, constraint stabilization and direct time integration transient algorithms in parallel computing.

Husner, J. M.↗