Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “superconductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Surface Current Approximation in Certain Problems of the Classical Theory of Superconductivity

The problems of the behavior of superconducting infinite plane-parallel plate and cylinder in an external magnetic field are solved in the approximation of the model of surface currents. The latter, in contrast to the conventional notation, enter as the currents of superconducting electrons into the boundary conditions for the magnetic induction. Surface currents are understood as the volumetric current flowing in the thickness of the near-surface layer, which is associated with the thickness of the London penetration depth of the field and currents into the thickness of the superconductor. It is shown that in this case, a jump in the magnetic quantities occurs at this thickness. The calculated average magnetization of the magnet is reduced to the strength of the external field. The proportionality coefficient, which is reasonable to call the mean magnetic susceptibility, turns out to be not exactly equal to –1, but has a slightly less value, because the field does not weaken immediately. The possibilities of experimental verification of the obtained effect are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Is there a path from cuprates towards room-temperature superconductivity?

A brief account is presented of an extensive experiment performed at Brookhaven National Laboratory, aimed at understanding the nature of high-temperature superconductivity in cuprates. Over the course of the last 12 years, over 2000 films of the prototypical high- T c superconductor, La 2-x Sr x CuO 4 , have been synthesized using atomic-layer-by-layer molecular beam epitaxy (ALL-MBE), characterized by a range of techniques, and patterned into devices. These were then used to measure accurately the key physical parameters in both the superconducting and the normal states, and establish their precise dependence on doping, temperature, and external fields. Our results bring in some great surprises, challenge the commonly held beliefs, rule out many theoretical models, and point to a new path for raising T c even further.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fluctuation-induced noise in out-of-equilibrium disordered superconducting films

We study out-of-equilibrium transport in disordered superconductors close to the superconducting transition. We consider a thin film connected by resistive tunnel interfaces to thermal reservoirs having different chemical potentials and temperatures. The nonequilibrium longitudinal current–current correlation function is calculated within the nonlinear sigma model description and nonlinear dependence on temperatures and chemical potentials is obtained. Different contributions are calculated, originating from the fluctuation-induced suppression of the quasiparticle density of states, Maki–Thompson and Aslamazov–Larkin processes. As a special case of our results, close-to-equilibrium we obtain the longitudinal ac conductivity using the fluctuation–dissipation theorem. -- Highlights: •Contributions to the current noise induced by superconducting fluctuations are calculated. •Nonequilibrium physics is studied. •Nonlinear dependence of the noise on temperatures and chemical potentials of the reservoirs is found.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Finite temperature phase diagrams of a two-band model of superconductivity

We explore the temperature effects in the superconducting phases of a hybridized two-band system. We show that for zero hybridization between the bands, there are two different critical temperatures. However, for any finite hybridization there is only one critical temperature at which the two gaps vanish simultaneously. We construct the phase diagrams of the critical temperature versus hybridization parameter α and critical temperature versus critical chemical potential asymmetry δμ between the bands, identifying the superconductor and normal phases in the system. We find an interesting reentrant behavior in the superconducting phase as the parameters α or δμ, which drive the phase transitions, increase. We also find that for optimal values of both α and δμ there is a significant enhancement of the critical temperature of the model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theory of multi-orbital topological superconductivity in transition metal dichalcogenides

We study possible superconducting states in transition metal dichalcogenide (TMD) monolayers, assuming an on-site pairing potential that includes both intra- and inter-orbital terms. We find that if the mirror symmetry with respect to the system’s plane is broken (e.g., by a substrate), this type of pairing can give rise to unconventional superconductivity, including time-reversal-invariant nodal and fully gapped topological phases. Using a multi-orbital renormalization group procedure, we show how these phases may result from the interplay between the local Coulomb repulsion, Hund’s rule coupling, and phonon-mediated attraction. In particular, for a range of interaction parameters, the system transitions from a trivial phase to a nodal phase and finally to a gapped topological phase upon increasing the strength of the mirror symmetry breaking term.

36 MATERIALS SCIENCE↗

A novel approach to characterizing the surface topography of niobium superconducting radio frequency (SRF) accelerator cavities

As superconducting niobium radio-frequency (SRF) cavities approach fundamental material limits, there is increased interest in understanding the details of topographical influences on realized performance limitations. Micro- and nano-roughness are implicated in both direct geometrical field enhancements as well as complications of the composition of the 50 nm surface layer in which the super-currents typically flow. Interior surface chemical treatments such as buffered chemical polishing (BCP) and electropolishing (EP) used to remove mechanical damage leave surface topography, including pits and protrusions of varying sharpness. These may promote RF magnetic field entry, locally quenching superconductivity, so as to degrade cavity performance. A more incisive analysis of surface topography than the widely used average roughness is needed. In this study, a power spectral density (PSD) approach based on Fourier analysis of surface topography data acquired by both stylus profilometry and atomic force microscopy (AFM) is introduced to distinguish the scale-dependent smoothing effects, resulting in a novel qualitative and quantitative description of Nb surface topography. The topographical evolution of the Nb surface as a function of different steps of well-controlled EP is discussed. This study will greatly help to identify optimum EP parameter sets for controlled and reproducible surface levelling of Nb for cavity production.

43 PARTICLE ACCELERATORS↗

Co-existence of diamagnetism and ferromagnetism and possible superconductivity in Y{sub 8}Ba{sub 5}Zn{sub 4}O{sub 21}

In the present study, we investigate structural and magnetic properties of the Y{sub 8}Ba{sub 5}Zn{sub 4}O{sub 21} structure, which was recently included in the catalog of the International Centre for Diffraction Data (ICDD) as a prototype structure. It was found that the Y{sub 8}Ba{sub 5}Zn{sub 4}O{sub 21} bulk sample seems to be electrically insulating at temperatures of liquid nitrogen and the room temperature. On the other hand, it has quite interesting magnetic properties. Diamagnetic phase transition was observed at {approx} 90 K, which resembles that of the superconducting materials. The studied composition repels permanent magnets at the liquid nitrogen temperature. Ferromagnetism also co-exists with diamagnetism in the temperature range between 50 K and 90 K. Possible reasons for these behaviors are discussed. - Research Highlights: {yields}Y{sub 8}Ba{sub 5}Zn{sub 4}O{sub 21} possesses both ferromagnetic and diamagnetic properties. {yields}A superconducting-like diamagnetic transition takes place at {approx} 90 K. {yields}Ferromagnetism and diamagnetism coexist between temperatures of 50 K and 90 K. {yields}At 10 K, only ferromagnetism exists and no traces of diamagnetism are detected. {yields}The studied samples repel permanent magnets in liquid nitrogen.

36 MATERIALS SCIENCE↗

Overview of ten-year operation of the superconducting linear accelerator at the Spallation Neutron Source

The Spallation Neutron Source (SNS) has acquired extensive operational experience of a pulsed proton superconducting linear accelerator (SCL) as a user facility. Numerous lessons have been learned in its first 10 years operation to achieve a stable and reliable operation of the SCL. In this paper, an overview of the SNS SCL design, qualification of superconducting radio frequency (SRF) cavities and ancillary subsystems, an overview of the SNS cryogenic system, the SCL operation including SCL output energy history and downtime statistics, performance stability of the SRF cavities, efforts for SRF cavity performance recovery and improvement at the SNS, and maintenance activities for cryomodules are introduced.

43 PARTICLE ACCELERATORS↗

Design options for a superconducting ion linac

Following a review of the design options for a superconducting ion linac, we present here an alternative design for the pre-stripper section of the superconducting driver linac for the rare isotope science project (RISP) of the Institute for Basic Science in Korea. The proposed alternative design takes advantage of the recent accelerator developments at Argonne, namely for the recent ATLAS intensity and efficiency upgrade and the Fermilab proton improvement plan project (PIP-II). In particular, the state-of-the-art performance of quarter-wave (QWRs) and half-wave resonators (HWRs), the integrated steering correctors and cold beam position monitors (BPMs) for a compact cryomodule design. In order to simplify the design and avoid frequency transitions, we used two types of QWRs at 81.25 MHz while the baseline design has QWRs at 81.25 MHz and HWRs at 162.5 MHz. The new QWR types were optimized for β ~0.05 and ~0.11, respectively, and corrected for beam steering effects. Nine cryomodules are required to reach the stripping energy of 18.5 MeV/u for uranium beam. An alternative radio-frequency quadrupole (RFQ) design was also developed. It is optimized with the multi-harmonic buncher (MHB) to produce a much smaller longitudinal emittance, offering much needed flexibility for beam tuning and more tolerance to errors. Following the lattice design optimization, end-to-end beam dynamics simulations including most important sources of machine error were performed. The results showed that the design is robust and tolerant to errors with no beam loss observed for typical machine errors.

43 PARTICLE ACCELERATORS↗

Superconductivity of magnesium diboride

Over the past 14 years MgB 2 has gone from a startling discovery to a promising, applied superconductor. In our article we present a brief overview of the synthesis and the basic superconducting properties of this remarkable compound. Specifically, the effect of pressure, substitutions and neutron irradiation on superconducting properties are discussed.

36 MATERIALS SCIENCE↗

High temperature interface superconductivity

High-T c superconductivity at interfaces has a history of more than a couple of decades. In this review we focus our attention on copper-oxide based heterostructures and multi-layers. We first discuss the technique, atomic layer-by-layer molecular beam epitaxy (ALL-MBE) engineering, that enabled High-T c Interface Superconductivity (HT-IS), and the challenges associated with the realization of high quality interfaces. Then we turn our attention to the experiments which shed light on the structure and properties of interfacial layers, allowing comparison to those of single-phase films and bulk crystals. Both ‘passive’ hetero-structures as well as surface-induced effects by external gating are discussed. Here, we conclude by comparing HT-IS in cuprates and in other classes of materials, especially Fe-based superconductors, and by examining the grand challenges currently laying ahead for the field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multi-layered chalcogenides with potential for magnetism and superconductivity

Layered thallium copper chalcogenides can form single, double, or triple layers of Cu– Ch separated by Tl sheets. Here we report on the preparation and properties of Tl-based materials of TlCu 2 Se 2 , TlCu 4 S 3 , TlCu 4 Se 3 and TlCu 6 S 4 . Having no long-range magnetism for these materials is quite surprising considering the possibilities of inter- and intra-layer exchange interactions through Cu 3 d , and we measure by magnetic susceptibility and confirm by neutron diffraction. First principles density-functional theory calculations for both the single-layer TlCu 2 Se 2 (isostructural to the ‘122’ iron-based superconductors) and the double-layer TlCu 4 Se 3 suggest a lack of Fermi-level spectral weight that is needed to drive a magnetic or superconducting instability. Furthermore, for multiple structural layers with Fe, there is much greater likelihood for magnetism and superconductivity.

2D crystal structures↗

Type-II superconductivity at 9K in Pb–Bi alloy

In the present work, we report the synthesis of Pb–Bi alloy with enhanced Tc of up to 9K, which is higher than that of Pb. The alloy is synthesized via a solid-state reaction route in the vacuum-encapsulated quartz tube at 700°C in an automated furnace. The synthesized sample is characterized by X-ray Diffraction(XRD) and Energy dispersive X-ray analysis(EDAX) for its phase purity and elemental composition. Rietveld refinement of XRD reveals that the end product is a majority hexagonal Pb 7 Bi 3 , with minor rhombohedral Bi. The electronic transport measurement shows metallic behavior with the Debye temperature of 108K and a superconductivity transition temperature (T c ) below 9K, which is the maximum to date for any reported Pb–Bi alloy, Pb or Bi at ambient pressure. Partial substitution of Bi at the Pb site may modify the free density of electronic states within the BCS model to attain the optimum T c , which is higher by around 2K from the reported T c of Pb. The superconductor phase diagram derived from magneto-transport measurements reveals that the synthesized alloy is a conventional superconductor with an upper critical field (H c2 ) of 3.9 T, which lies well within the Pauli paramagnetic limit. The magnetization measurements carried out following ZFC(Zero Field Cool) protocols infer that the synthesized alloy is a bulk superconductor below 9K. The isothermal M-H(Magnetization vs. Field) measurements performed below T c establish it as a type-II superconductor. Furthermore, the specific heat capacity measurements show that the Pb–Bi alloy is a strongly coupled bulk superconductor below around 9K with possibly two superconducting gaps.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stress accommodation in nanoscale dolan bridges designed for superconducting qubits

Josephson junctions are the principal circuit element in numerous superconducting quantum information devices and can be readily integrated into large-scale electronics. However, device integration at the wafer scale necessarily depends on having a reliable, high-fidelity, and high-yield fabrication method for creating Josephson junctions. When creating Al/AlO x based superconducting qubits, the standard Josephson junction fabrication method relies on a sub-micron suspended resist bridge, known as a Dolan bridge, which tends to be particularly fragile and can often times fracture during the resist development process, ultimately resulting in device failure. In this work, we demonstrate a unique Josephson junction lithography mask design that incorporates stress-relief channels. Our simulation results show that the addition of stress-relief channels reduces the lateral stress in the Dolan bridge by more than 70% for all the bridge geometries investigated. In practice, our novel mask design significantly increased the survivability of the bridge during device processing, resulting in 100% yield for over 100 Josephson junctions fabricated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hybrid Symmetry Epitaxy of the Superconducting Fe(Te,Se) Film on a Topological Insulator

It is challenging to grow an epitaxial 4-fold compound superconductor (SC) on a 6-fold topological insulator (TI) platform due to the stringent lattice-matching requirement. Here, we demonstrate that Fe(Te,Se) can grow epitaxially on a TI (Bi 2 Te 3 ) layer due to accidental, uniaxial lattice match, which is dubbed as “hybrid symmetry epitaxy”. This new growth mode is critical to stabilizing robust superconductivity with TC as high as 13 K. Furthermore, the superconductivity in this FeTe 1–x Se x /Bi 2 Te 3 system survives in the Te-rich phase with Se content as low as x = 0.03 but vanishes at Se content above x = 0.56, exhibiting a phase diagram that is quite different from that of the conventional Fe(Te,Se) systems. This unique heterostructure platform that can be formed in both TI-on-SC and SC-on-TI sequences opens a route to unprecedented topological heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Topological Superconductivity Based on Antisymmetric Spin–Orbit Coupling

Topological superconductivity (TSC) has drawn much attention for its fundamental interest and application in quantum computation. An outstanding challenge is the lack of intrinsic TSC materials with a p-wave pairing gap, which has led to the development of an effective p-wave theory of coupling s-wave gap with Rashba spin–orbit coupling (RSOC). However, the RSOC-strict mechanism and materials pose still both fundamental and practical limitations. Here, we generalize this theory to antisymmetric SOC (ASOC). Using k·p perturbation theory, we demonstrate that 2D crystals, with point groups of C 2 , C 4 , C 6 , C 2v , C 4v , C 6v , D 2 , D 4 , D 6 , S 4 , or D 2d , can all facilitate the desired ASOC. Remarkably, this enables us to discover 314 TSC candidates by screening 2D material databases, which are further confirmed by first-principles calculations of Majorana boundary modes and the topological invariant of the superconducting gap. As a result, our work fundamentally enriches TSC theory and greatly expands the classes of TSC materials for experimental exploration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superconductivity below 20 K in heavily electron-doped surface layer of FeSe bulk crystal

A superconducting transition temperature (T c ) as high as 100 K was recently discovered in one monolayer FeSe grown on SrTiO 3 . The discovery ignited efforts to identify the mechanism for the markedly enhanced T c from its bulk value of 8 K. There are two main views about the origin of the T c enhancement: interfacial effects and/or excess electrons with strong electron correlation. Here, we report the observation of superconductivity below 20 K in surface electron-doped bulk FeSe. The doped surface layer possesses all the key spectroscopic aspects of the monolayer FeSe on SrTiO 3 . Without interfacial effects, the surface layer state has a moderate T c of 20 K with a smaller gap opening of 4.2 meV. Our results show that excess electrons with strong correlation cannot induce the maximum T c , which in turn reveals the need for interfacial effects to achieve the highest T c in one monolayer FeSe on SrTiO 3 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strong interplay between stripe spin fluctuations, nematicity and superconductivity in FeSe

In iron-based superconductors the interactions driving the nematic order (that breaks four-fold rotational symmetry in the iron plane) may also mediate the Cooper pairing. The experimental determination of these interactions, which are believed to depend on the orbital or the spin degrees of freedom, is challenging because nematic order occurs at, or slightly above, the ordering temperature of a stripe magnetic phase. In this paper, we study FeSe—which exhibits a nematic (orthorhombic) phase transition at T s = 90 K without antiferromagnetic ordering—by neutron scattering, finding substantial stripe spin fluctuations coupled with the nematicity that are enhanced abruptly on cooling through T s . A sharp spin resonance develops in the superconducting state, whose energy (~4 meV) is consistent with an electron–boson coupling mode revealed by scanning tunnelling spectroscopy. The magnetic spectral weight in FeSe is found to be comparable to that of the iron arsenides. Finally, our results support recent theoretical proposals that both nematicity and superconductivity are driven by spin fluctuations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗