Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “perturbation analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Cage stability analysis for SSME HPOTP bearings

A numerical model of cage motion (CAGEDYN) was used to analyze the stability of bearing cages in the Space Shuttle main engine (SSME) high pressure oxygen turbopump (HPOTP). The stability of existing bearing geometries, as well as perturbations of these geometries, was analyzed for various operating conditions. Results of the analyses show that some combinations of operating parameters, exacerbated by the sparse lubrication that exist in the HPOTP bearings, can cause unstable cage oscillations. Frequencies of cage oscillations were predicted by the CAGEDYN numerical model by Fourier analysis of predicted cage motions. Under conditions that cause unstable cage motion, high frequency oscillations were predicted that could cause premature cage failures.

Merriman, T. L.↗

Multi-walled carbon nanotube-induced gene expression in the mouse lung: Association with lung pathology

Due to the fibrous shape and durability of multi-walled carbon nanotubes (MWCNT), concerns regarding their potential for producing environmental and human health risks, including carcinogenesis, have been raised. This study sought to investigate how previously identified lung cancer prognostic biomarkers and the related cancer signaling pathways are affected in the mouse lung following pharyngeal aspiration of well-dispersed MWCNT. A total of 63 identified lung cancer prognostic biomarker genes and major signaling biomarker genes were analyzed in mouse lungs (n = 80) exposed to 0, 10, 20, 40, or 80 {mu}g of MWCNT by pharyngeal aspiration at 7 and 56 days post-exposure using quantitative PCR assays. At 7 and 56 days post-exposure, a set of 7 genes and a set of 11 genes, respectively, showed differential expression in the lungs of mice exposed to MWCNT vs. the control group. Additionally, these significant genes could separate the control group from the treated group over the time series in a hierarchical gene clustering analysis. Furthermore, 4 genes from these two sets of significant genes, coiled-coil domain containing-99 (Ccdc99), muscle segment homeobox gene-2 (Msx2), nitric oxide synthase-2 (Nos2), and wingless-type inhibitory factor-1 (Wif1), showed significant mRNA expression perturbations at both time points. It was also found that the expression changes of these 4 overlapping genes at 7 days post-exposure were attenuated at 56 days post-exposure. Ingenuity Pathway Analysis (IPA) found that several carcinogenic-related signaling pathways and carcinogenesis itself were associated with both the 7 and 11 gene signatures. Taken together, this study identifies that MWCNT exposure affects a subset of lung cancer biomarkers in mouse lungs. - Research Highlights: > Multi-Walled Carbon Nanotubes affect lung cancer biomarkers in mouse lungs. > The results suggest potentially harmful effects of MWCNT exposure on human lungs. > The results could potentially be used for the medical surveillance of workers.

60 APPLIED LIFE SCIENCES↗

High-throughput density-functional perturbation theory phonons for inorganic materials

The knowledge of the vibrational properties of a material is of key importance to understand physical phenomena such as thermal conductivity, superconductivity, and ferroelectricity among others. However, detailed experimental phonon spectra are available only for a limited number of materials, which hinders the large-scale analysis of vibrational properties and their derived quantities. In this work, we perform ab initio calculations of the full phonon dispersion and vibrational density of states for 1521 semiconductor compounds in the harmonic approximation based on density functional perturbation theory. The data is collected along with derived dielectric and thermodynamic properties. As a result, we present the procedure used to obtain the results, the details of the provided database and a validation based on the comparison with experimental data.

36 MATERIALS SCIENCE↗

A linear stability analysis for nonlinear, grey, thermal radiative transfer problems

We present a new linear stability analysis of three time discretizations and Monte Carlo interpretations of the nonlinear, grey thermal radiative transfer (TRT) equations: the widely used 'Implicit Monte Carlo' (IMC) equations, the Carter Forest (CF) equations, and the Ahrens-Larsen or 'Semi-Analog Monte Carlo' (SMC) equations. Using a spatial Fourier analysis of the 1-D Implicit Monte Carlo (IMC) equations that are linearized about an equilibrium solution, we show that the IMC equations are unconditionally stable (undamped perturbations do not exist) if {alpha}, the IMC time-discretization parameter, satisfies 0.5 < {alpha} {<=} 1. This is consistent with conventional wisdom. However, we also show that for sufficiently large time steps, unphysical damped oscillations can exist that correspond to the lowest-frequency Fourier modes. After numerically confirming this result, we develop a method to assess the stability of any time discretization of the 0-D, nonlinear, grey, thermal radiative transfer problem. Subsequent analyses of the CF and SMC methods then demonstrate that the CF method is unconditionally stable and monotonic, but the SMC method is conditionally stable and permits unphysical oscillatory solutions that can prevent it from reaching equilibrium. This stability theory provides new conditions on the time step to guarantee monotonicity of the IMC solution, although they are likely too conservative to be used in practice. Theoretical predictions are tested and confirmed with numerical experiments.

97 MATHEMATICS AND COMPUTING↗

Stability Analysis of the Planetary System Orbiting Upsilon Andromedae

We present results of long-term numerical orbital integrations designed to test the stability of the three-planet system orbiting Upsilon Andromedae and short-term integrations to test whether mutual perturbations among the planets can be used to determine planetary masses. Our initial conditions are based on the latest fits to the radial velocity data obtained by the planet-search group at Lick Observatory. The new fits result in significantly more stable systems than did the initially announced planetary parameters. An analytic analysis of the star and the two outer planets shows that this subsystem is Hill stable up to five. Our integrations involving all three planets show that the system is stable for at least 100 Myr for up to four. In our simulations, we still see a secular resonance between the outer two planets and in some cases large oscillations in the eccentricity of the inner planet.

Lissauer, Jack J.↗

Detailed Analysis of the Asteroid Pair (6070) Rheinland and (54827) 2001 NQ8

The existence of asteroid pairs, two bodies on similar heliocentric orbits, reveals an ongoing process of rotational fission among asteroids. This newly found class of objects has not been studied in detail yet. Here we choose asteroids (6070) Rheinland and (54827) 2001 NQ8, the most suitable pair for an in-depth analysis. First, we use available optical photometry to determine their rotational state and convex shapes. Rotational pole of Rheinland is very near the south ecliptic pole with a latitude uncertainty of about 10°. There are two equivalent solutions for the pole of 2001 NQ8, either (72°, −49°) or (242°, −46°) (ecliptic longitude and latitude). In both cases, the longitude values have about 10° uncertainty and the latitude values have about 15° uncertainty (both 3σ uncertainties). The sidereal rotation period of 2001 NQ8 is 5.877186 ± 0.000002 hr. Second, we construct a precise numerical integrator to determine the past state vectors of the pair’s components, namely their heliocentric positions and velocities, and orientation of their spin vectors. Using this new tool, we investigate the origin of the (6070) Rheinland and (54827) 2001 NQ8 pair. We find a formal age solution of 16.34 ± 0.04 kyr. This includes effects of the most massive objects in the asteroid belt (Ceres, Pallas, and Vesta), but the unaccounted gravitational perturbations from other asteroids may imply that the realistic age uncertainty is slightly larger than its formal value. Analyzing results from our numerical simulation to 250 kya, we argue against a possibility that this pair would allow an older age. Initial spin vectors of the two asteroids, at the moment of their separation, were not collinear, but tilted by 38{sup ∘}±12{sup ∘}.

79 ASTRONOMY AND ASTROPHYSICS↗

Oscillating scalar fields and the Hubble tension: A resolution with novel signatures

Here, we present a detailed investigation of a subdominant oscillating scalar field [“early dark energy” (EDE)] in the context of resolving the Hubble tension. Consistent with earlier work, but without relying on fluid approximations, we find that a scalar field frozen due to Hubble friction until log 10 ($z_c$) ~ 3.5, reaching $ρ_{\text{EDE}}(z_c)/ρ_{\text{tot}}$ ~ 10 % and diluting faster than matter afterwards, can bring cosmic microwave background (CMB), baryonic acoustic oscillations, supernovae luminosity distances, and the late-time estimate of the Hubble constant from the SH0ES Collaboration into agreement. A scalar field potential that scales as $V (\phi) \propto \phi ^{2n}$ with 2 ≲ $\textit{n}$ ≲ 3.4 around the minimum is preferred at the 68% confidence level, and the Planck polarization places additional constraints on the dynamics of perturbations in the scalar field. In particular, the data prefer a potential that flattens at large field displacements. A Markov-chain Monte Carlo analysis of mock data shows that the next-generation CMB observations (i.e., CMB-S4) can unambiguously detect the presence of the EDE at a very high significance. This projected sensitivity to the EDE dynamics is mainly driven by improved measurements of the E-mode polarization. We also explore new observational signatures of EDE scalar field dynamics: (i) We find that depending on the strength of the tensor-to-scalar ratio, the presence of the EDE might imply the existence of isocurvature perturbations in the CMB. (ii) We show that a strikingly rapid, scale-dependent growth of EDE field perturbations can result from parametric resonance driven by the anharmonic oscillating field for $\textit{n}$ ≈ 2. This instability and ensuing potentially nonlinear, spatially inhomogeneous, dynamics may provide unique signatures of this scenario.

79 ASTRONOMY AND ASTROPHYSICS↗

An effective description of charge diffusion and energy transport in a charged plasma from holography

We discuss the physics of sound propagation and charge diffusion in a plasma with non-vanishing charge density. Our analysis culminates the program initiated in to construct an open effective field theory of low-lying modes of the stress tensor and charge current in such plasmas. We model the plasma holographically as a Reissner-Nordström-AdS d+1 black hole, and study linearized fluctuations of longitudinally polarized scalar gravitons and photons in this background. We demonstrate that the perturbations can be decoupled and repackaged into the dynamics of two designer scalars, whose gravitational coupling is modulated by a non-trivial dilatonic factor. The holographic analysis allows us to isolate the phonon mode from the charge diffusion mode, and identify the combination of currents that corresponds to each of them. We use these results to obtain the real-time Gaussian effective action, which includes both the retarded response and the associated stochastic (Hawking) fluctuations, accurate to quartic order in gradients.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Overview of the results on divertor heat loads in RMP controlled H-modeplasmas on DIII-D

This paper demonstrates the manipulation of power deposition on divertor targets at DIII-D by the application of resonant magnetic perturbations (RMPs) for suppression of large type-I edge localized modes (ELMs) is analysed. We discuss the modification of the ELM characteristics by the RMP applied. It is shown that the width of the deposition pattern in ELMy H-mode depends linearly on the ELM deposited energy, whereas in the RMP phase of the discharge those patterns are controlled by the externally induced magnetic perturbation. It was also found that the manipulation of heat transport due to the application of small, edge RMP depends on the plasma pedestal electron collisionality. We then compare in this analysis RMP and no RMP phases with and without complete ELM suppression. At high , the heat flux during the ELM suppressed phase is of the same order as the inter-ELM and the no-RMP phase. However, below this collisionality value, a slight increase in the total power flux to the divertor is observed during the RMP phase. We surmised that this is most likely caused by a more negative potential at the divertor surface due to hot electrons reaching the divertor surface from the pedestal area along perturbed, open field lines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Non-perturbative effect and PAMELA limit on electro-weak dark matter

We discuss the non-perturbative effects on the annihilation cross section of an Electro-Weak Dark Matter (EWDM) particle belonging to an electroweak multiplet when the splittings between the masses of the DM component and the other charged or neutral component(s) of the multiplet are treated as free parameters. Our analysis shows that EWDM exhibits not only the usual Sommerfeld enhancement with resonance peaks but also dips where the cross section is suppressed. Moreover, we have shown that the non-perturbative effects become important even when the EWDM mass is below the TeV scale, provided that some of the mass splittings are reduced to the order of a few MeV. This extends the possibility of observing sizeable non-perturbative effects in the dark matter annihilation to values of the dark matter mass significantly smaller than previously considered, since only electroweak-induced mass splittings larger than 100 MeV have been discussed in the literature so far. We have then used the available experimental data on the cosmic antiproton flux to constrain the EWDM parameter space. In our calculation of the expected signal we have included the effect of the convolution of the cross section with the velocity distribution of the dark matter particles in the Galaxy, showing that it can alter the non-perturbative effects significantly. In the case of EWDM with non-zero hypercharge, we have shown that the mass splitting in the Dirac dark matter fermion can be chosen so that the inelastic cross section of the EWDM off nuclei is allowed by present direct detection constraints and at the same time is within the reach of future experiments.

79 ASTRONOMY AND ASTROPHYSICS↗

Reduced order models for thermal analysis : final report : LDRD Project No. 137807.

This LDRD Senior's Council Project is focused on the development, implementation and evaluation of Reduced Order Models (ROM) for application in the thermal analysis of complex engineering problems. Two basic approaches to developing a ROM for combined thermal conduction and enclosure radiation problems are considered. As a prerequisite to a ROM a fully coupled solution method for conduction/radiation models is required; a parallel implementation is explored for this class of problems. High-fidelity models of large, complex systems are now used routinely to verify design and performance. However, there are applications where the high-fidelity model is too large to be used repetitively in a design mode. One such application is the design of a control system that oversees the functioning of the complex, high-fidelity model. Examples include control systems for manufacturing processes such as brazing and annealing furnaces as well as control systems for the thermal management of optical systems. A reduced order model (ROM) seeks to reduce the number of degrees of freedom needed to represent the overall behavior of the large system without a significant loss in accuracy. The reduction in the number of degrees of freedom of the ROM leads to immediate increases in computational efficiency and allows many design parameters and perturbations to be quickly and effectively evaluated. Reduced order models are routinely used in solid mechanics where techniques such as modal analysis have reached a high state of refinement. Similar techniques have recently been applied in standard thermal conduction problems e.g. though the general use of ROM for heat transfer is not yet widespread. One major difficulty with the development of ROM for general thermal analysis is the need to include the very nonlinear effects of enclosure radiation in many applications. Many ROM methods have considered only linear or mildly nonlinear problems. In the present study a reduced order model is considered for application to the combined problem of thermal conduction and enclosure radiation. The main objective is to develop a procedure that can be implemented in an existing thermal analysis code. The main analysis objective is to allow thermal controller software to be used in the design of a control system for a large optical system that resides with a complex radiation dominated enclosure. In the remainder of this section a brief outline of ROM methods is provided. The following chapter describes the fully coupled conduction/radiation method that is required prior to considering a ROM approach. Considerable effort was expended to implement and test the combined solution method; the ROM project ended shortly after the completion of this milestone and thus the ROM results are incomplete. The report concludes with some observations and recommendations.

42 ENGINEERING↗

Aircraft High-Lift Aerodynamic Analysis Using a Surface-Vorticity Solver

This study extends an existing semi-empirical approach to high-lift analysis by examining its effectiveness for use with a three-dimensional aerodynamic analysis method. The aircraft high-lift geometry is modeled in Vehicle Sketch Pad (OpenVSP) using a newly-developed set of techniques for building a three-dimensional model of the high-lift geometry, and for controlling flap deflections using scripted parameter linking. Analysis of the low-speed aerodynamics is performed in FlightStream, a novel surface-vorticity solver that is expected to be substantially more robust and stable compared to pressure-based potential-flow solvers and less sensitive to surface perturbations. The calculated lift curve and drag polar are modified by an empirical lift-effectiveness factor that takes into account the effects of viscosity that are not captured in the potential-flow solution. Analysis results are validated against wind-tunnel data for The Energy-Efficient Transport AR12 low-speed wind-tunnel model, a 12-foot, full-span aircraft configuration with a supercritical wing, full-span slats, and part-span double-slotted flaps.

Olson, Erik D.↗

Aeroelastic Stability of Rotor Blades Using Finite Element Analysis

The flutter stability of flap bending, lead-lag bending, and torsion of helicopter rotor blades in hover is investigated using a finite element formulation based on Hamilton's principle. The blade is divided into a number of finite elements. Quasi-steady strip theory is used to evaluate the aerodynamic loads. The nonlinear equations of motion are solved for steady-state blade deflections through an iterative procedure. The equations of motion are linearized assuming blade motion to be a small perturbation about the steady deflected shape. The normal mode method based on the coupled rotating natural modes is used to reduce the number of equations in the flutter analysis. First the formulation is applied to single-load-path blades (articulated and hingeless blades). Numerical results show very good agreement with existing results obtained using the modal approach. The second part of the application concerns multiple-load-path blades, i.e. bearingless blades. Numerical results are presented for several analytical models of the bearingless blade. Results are also obtained using an equivalent beam approach wherein a bearingless blade is modelled as a single beam with equivalent properties. Results show the equivalent beam model.

Chopra, I.↗

Spectral Analysis of Linear Models of Viscoelasticity

In this paper, we examine Volterra integrodifferential equations with unbounded operator coefficients in Hilbert spaces. Equations considered are abstract hyperbolic equations perturbed by terms containing Volterra integral operators. These equations can be realized as partial integrodifferential equations that appear in the theory of viscoelasticity (see [2, 5]), as Gurtin–Pipkin integrodifferential equations (see [1, 7]) that describe finite-speed heat transfer in materials with memory. They also appear in averaging problems for multiphase media (Darcy’s law.

97 MATHEMATICS AND COMPUTING↗

Sensitivity Analysis for Solutions to Heterogeneous Nonlocal Systems. Theoretical and Numerical Studies

The paper presents a collection of results on continuous dependence for solutions to nonlocal problems under perturbations of data and system parameters. The integral operators appearing in the systems capture interactions via heterogeneous kernels that exhibit different types of weak singularities, space dependence, even regions of zero-interaction. Here, the stability results showcase explicit bounds involving the measure of the domain and of the interaction collar size, nonlocal Poincaré constant, and other parameters. In the nonlinear setting, the bounds quantify in different L p norms the sensitivity of solutions under different nonlinearity profiles. The results are validated by numerical simulations showcasing discontinuous solutions, varying horizons of interactions, and symmetric and heterogeneous kernels.

97 MATHEMATICS AND COMPUTING↗

Factorized molecular wave functions: Analysis of the nuclear factor

The exact factorization of molecular wave functions leads to nuclear factors which should be nodeless functions. We reconsider the case of vibrational perturbations in a diatomic species, a situation usually treated by combining Born-Oppenheimer products. It was shown [R. Lefebvre, J. Chem. Phys. 142, 074106 (2015)] that it is possible to derive, from the solutions of coupled equations, the form of the factorized function. By increasing artificially the interstate coupling in the usual approach, the adiabatic regime can be reached, whereby the wave function can be reduced to a single product. The nuclear factor of this product is determined by the lowest of the two potentials obtained by diagonalization of the potential matrix. By comparison with the nuclear wave function of the factorized scheme, it is shown that by a simple rectification, an agreement is obtained between the modified nodeless function and that of the adiabatic scheme.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparing Three Types of Numerical Techniques for the Integration of Perturbed Satellite Motion

This project compares the computational efficiency, stability/accuracy, and precision of various numerical integration schemes to determine which is most appropriate for use in conjunction analysis of satellite orbits. Specifically, this project examines a few of the top Runge-Kutta, extrapolation, and multistep algorithms, combining both previous research in this field with new analysis to form the final conclusion. In addition, a method is proposed for using dense output to expedite orbit calculations.

97 MATHEMATICS AND COMPUTING↗

Evolved QCD predictions for the meson-photon transition form factors: beyond the semiclassical AdS/QCD approximation

The QCD evolution of the pion distribution amplitude (DA) {phi}{sub {pi}} (x, Q{sup 2}) is computed for several commonly used models. Our analysis includes the nonperturbative form predicted by lightfront holographic QCD, thus combining the nonperturbative bound state dynamics of the pion with the perturbative ERBL evolution of the pion distribution amplitude. We calculate the meson-photon transition form factors for the {pi}{sup 0}, {eta} and {eta}' using the hard-scattering formalism. We point out that a widely-used approximation of replacing {phi} (x; (1 - x)Q) with {phi} (x;Q) in the calculations will unjustifiably reduce the predictions for the meson-photon transition form factors. It is found that the four models of the pion DA discussed give very different predictions for the Q{sup 2} dependence of the meson-photon transition form factors in the region of Q{sup 2} > 30 GeV{sup 2}. More accurate measurements of these transition form factors at the large Q{sup 2} region will be able to distinguish the four models of the pion DA. The rapid growth of the large Q{sup 2} data for the pion-photon transition form factor reported by the BABAR Collaboration is difficult to explain within the current framework of QCD. If the BABAR data for the meson-photon transition form factor for the {pi}{sup 0} is confirmed, it could indicate physics beyond-the-standard model, such as a weakly-coupled elementary C = + axial vector or pseudoscalar z{sup 0} in the few GeV domain, an elementary field which would provide the coupling {gamma}{sup *}{gamma} {yields} z{sup 0} {yields} {pi}{sup 0} at leading twist. Our analysis thus indicates the importance of additional measurements of the pion-photon transition form factor at large Q{sup 2}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗