Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “monolayers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Structural and electronic properties of ultrathin picene films on the Ag(100) surface

In this study we investigate using scanning tunneling microscopy and electronic structure calculations the growth, assembly, and electronic properties of picene molecules on the Ag(100), Ag(111), and Cu(111) surfaces, with particular emphasis on Ag(100). In each case, the picene molecules are found to lie parallel to the surface at coverages up to half a monolayer and to adopt alternating parallel and tilted orientations at full monolayer coverage. In the latter case, the arrangement of the molecules is roughly similar to that in the bulk crystal, making ultrathin films of picene interesting model systems and worthwhile to explore its electronic properties. On the 2 metal surfaces considered, the growth mode of picene is quite different from that of its structural isomer pentacene, which forms bilayer coverage on top of a dense monolayer of flat-lying molecules on metal surfaces. Tunneling spectroscopy measurements provide estimates of the energies of several low-lying molecular orbitals as well as of the highest unoccupied molecular orbital of the absorbed picene molecules. From analysis of these results, we establish that the on-site Coulomb repulsion for picene decreases by ~ 2 eV in going from the gas phase to the full monolayer on Ag(100), bringing it close to that of the undoped bulk crystal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gel entrapment culture of rat hepatocytes for investigation of tetracycline-induced toxicity

This paper aimed to explore three-dimensionally cultured hepatocytes for testing drug-induced nonalcoholic steatohepatitis. Gel entrapped rat hepatocytes were applied for investigation of the tetracycline-induced steatohepatitis, while hepatocyte monolayer was set as a control. The toxic responses of hepatocytes were systematically evaluated by measuring cell viability, liver-specific function, lipid accumulation, oxidative stress, adenosine triphosphate content and mitochondrial membrane potential. The results suggested that gel entrapped hepatocytes showed cell death after 96 h of tetracycline treatment at 25 {mu}M which is equivalent to toxic serum concentration in rats, while hepatocyte monolayer showed cell death at a high dose of 200 {mu}M. The concentration-dependent accumulation of lipid as well as mitochondrial damage were regarded as two early events for tetracycline hepatotoxicity in gel entrapment culture due to their detectability ahead of subsequent increase of oxidative stress and a final cell death. Furthermore, the potent protection of fenofibrate and fructose-1,6-diphosphate were evidenced in only gel entrapment culture with higher expressions on the genes related to {beta}-oxidation than hepatocyte monolayer, suggesting the mediation of lipid metabolism and mitochondrial damage in tetracycline toxicity. Overall, gel entrapped hepatocytes in three-dimension reflected more of the tetracycline toxicity in vivo than hepatocyte monolayer and thus was suggested as a more relevant system for evaluating steatogenic drugs.

60 APPLIED LIFE SCIENCES↗

Vascular endothelial growth factor-D is a key molecule that enhances lymphatic metastasis of soft tissue sarcomas

Studies on lymph node metastasis of soft tissue sarcomas are insufficient because of its rarity. In this study, we examined the expressions of vascular endothelial growth factor (VEGF)-C and VEGF-D in soft tissue sarcomas metastasized to lymph nodes. In addition, the effects of the two molecules on the barrier function of a lymphatic endothelial cell monolayer against sarcoma cells were analyzed. We examined 7 patients who had soft tissue sarcomas with lymph node metastases and who had undergone neither chemotherapy nor radiotherapy before lymphadenectomy. Immunohistochemistry revealed that 2 of 7 sarcomas that metastasized to lymph nodes expressed VEGF-C both in primary and metastatic lesions. On the other hand, VEGF-D expression was detected in 4 of 7 primary and 7 of 7 metastatic lesions, respectively. Interestingly, 3 cases that showed no VEGF-D expression at primary sites expressed VEGF-D in metastatic lesions. Recombinant VEGF-C at 10{sup -8} and VEGF-D at 10{sup -7}and 10{sup -8} g/ml significantly increased the random motility of lymphatic endothelial cells compared with controls. VEGF-D significantly increased the migration of sarcoma cells through lymphatic endothelial monolayers. The fact that VEGF-D induced the migration of fibrosarcomas through the lymphatic endothelial monolayer is the probable reason for the strong relationship between VEGF-D expression and lymph node metastasis in soft tissue sarcomas. The important propensities of this molecule for the increase of lymph node metastases are not only lymphangiogenesis but also down-regulation of the barrier function of lymphatic endothelial monolayers, which facilitates sarcoma cells entering the lymphatic circulation.

60 APPLIED LIFE SCIENCES↗

ZnO($10\bar 10$) Surface Hydroxylation under Ambient Water Vapor

The interaction of water vapor with a single crystal ZnO($10\bar 10$) surface was investigated using synchrotron-based ambient pressure X-ray photoelectron spectroscopy (APXPS). Two isobaric experiments were performed at 0.3 and 0.07 Torr water vapor pressure at sample temperatures ranging from 750 to 295 K up to a maximum of 2% relative humidity (RH). Below 10–4 % RH the ZnO($10\bar 10$) interface is covered with ~0.25 monolayers of OH groups attributed to dissociation at nonstoichiometric defect sites. At ~10–4 % RH there is a sharp onset in increased surface hydroxylation attributed to reaction at stoichiometric terrace sites. The surface saturates with an OH monolayer ~0.26 nm thick and occurs in the absence of any observable molecularly bound water, suggesting the formation of a 1 × 1 dissociated monolayer structure. This is in stark contrast to ultrahigh vacuum experiments and molecular simulations that show the optimum structure is a 2 × 1 partially dissociated H2O/OH monolayer. The sharp onset to terrace site hydroxylation at ~10–4 % RH for ZnO($10\bar 10$) contrasts with APXPS observations for MgO(100) which show a sharp onset at 10–2 % RH. A surface thermodynamic analysis reveals that this shift to lower RH for ZnO($10\bar 10$) compared to MgO(100) is due to a more favorable Gibbs free energy for terrace site hydroxylation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sulfur Atoms Adsorbed on Cu(100) at Low Coverage: Characterization and Stability against Complexation

By using scanning tunneling microscopy, we characterize the size and bias-dependent shape of sulfur atoms on Cu(100) at low coverage (below 0.1 monolayers) and low temperature (quenched from 300 to 5 K). Sulfur atoms populate the Cu(100) terraces more heavily than steps at low coverage, but as coverage approaches 0.1 monolayers, close-packed step edges become fully populated, with sulfur atoms occupying sites on top of the step. Density functional theory (DFT) corroborates the preferential population of terraces at low coverage as well as the step adsorption site. In experiment, small regions with p(2 × 2)-like atomic arrangements emerge on the terraces as sulfur coverage approaches 0.1 monolayer. Using DFT, a lattice gas model has been developed, and Monte Carlo simulations based on this model have been compared with the observed terrace configurations. A model containing eight pairwise interaction energies, all repulsive, gives qualitative agreement. Experiment shows that atomic adsorbed sulfur is the only species on Cu(100) up to a coverage of 0.09 monolayers. There are no Cu–S complexes. Conversely, prior work has shown that a Cu 2 S 3 complex forms on Cu(111) under comparable conditions. On the basis of DFT, this difference can be attributed mainly to stronger adsorption of sulfur on Cu(100) as compared with Cu(111).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and Desorption Kinetics of Acetonitrile Thin Films on Pt(111) and on Graphene on Pt(111)

Acetonitrile thin films were prepared on Pt(111) and on graphene on Pt(111) using molecular beam techniques. Temperature programed desorption (TPD) experiments of acetonitrile on Pt(111) displayed first-order kinetics for monolayer desorption and zero-order kinetics for multilayer desorption. We used reflection adsorption infrared spectroscopy (RAIRS) to characterize the orientation of the monolayer on Pt(111). Acetonitrile molecules have been shown to adopt a bridging structure where the C=N bond breaks to form two single bonds to underlying platinum atoms. When Tdeposition = 120 K our RAIRS spectra are consistent with this bridging configuration. However, when Tdeposition was lowered to 60 K molecules retained the C=N bond and adopted a vertical orientation with the nitrogen closest to the platinum. On graphene, the TPD experiments show that both the monolayer and multilayer desorb with zero-order kinetics. Our RAIRS spectra suggest that the monolayer consists of acetonitrile molecules oriented with their molecular axes parallel to the graphene substrate. This orientation did not change when Tdeposition was varied from 60 to 120 K. Our results provide a more complete picture of how acetonitrile molecules interact with Pt(111) and with graphene surfaces.

desorption tin films, molecules, thin films, desor↗

Coverage-Dependent Adsorption of Hydrogen on Fe(100): Determining Catalytically Relevant Surface Structures via Lattice Gas Models

Hydrogen adatoms are a critical surface species for several reactions catalyzed by Fe surfaces such as Fischer–Tropsch synthesis, ammonia synthesis, and the hydrodeoxygenation of biomass-derived oxygenates. Parameterizing the energetics for H/Fe in terms of both coverage and configuration space can significantly aid in the development of multiscale models as well as provide atomic level insight into the dominant surface structures present under realistic reaction conditions. Here, we construct a lattice gas model for H/Fe(100), where the lateral interactions are determined from first-principles using density functional theory. Using 950 symmetrically unique H/Fe(100) configurations, we generate a cluster expansion with a predictive accuracy in terms of surface energy of 3.8 meV/site over a coverage range from 0 to 3 monolayers. Ten electronic ground state structures are identified from this thorough scan (including the structures at 0 and 3 monolayers), which were subsequently used to generate ab initio phase diagrams under a range of temperatures and pressures. Under reaction conditions typical of Fischer–Tropsch synthesis, ammonia synthesis, and biomass oxygenate hydrodeoxygenation, we find that the 1.0 monolayer structure is dominant. Furthermore, examination of the total H–H lateral interactions for the H/Fe(100) electronic ground state structures shows that H/Fe(100) can be accurately modeled via a mean-field ideal lattice gas model for coverages less than 1.0 monolayers. Altogether, this work enables the incorporation of H–H lateral interactions on Fe(100) into multiscale models, via either mean-field or site-dependent techniques, and provides atomic insight into the catalytically relevant H/Fe(100) structures for a range of heterogeneous reactions.

09 BIOMASS FUELS↗

Defect Healing in Layered Materials: A Machine Learning-Assisted Characterization of MoS2 Crystal Phases

Monolayer MoS2 is an outstanding candidate for a next-generation semiconducting material because of its exceptional physical, chemical, and mechanical properties. To make this promising layered material applicable to nanostructured electronic applications, synthesis of a highly crystalline MoS2 monolayer is vitally important. Among different types of synthesis methods, chemical vapor deposition (CVD) is the most practical way to synthesize few- or mono-layer MoS2 on the target substrate owing to its simplicity and scalability. However, synthesis of a highly crystalline MoS2 layer remains elusive. This is because of the number of grains and defects unavoidably generated during CVD synthesis. Here, we perform multimillion-atom reactive molecular dynamics (RMD) simulations to identify an origin of the grain growth, migration, and defect healing process on a CVD-grown MoS2 monolayer. RMD results reveal that grain boundaries could be successfully repaired by multiple heat treatments. Our work proposes a new way of controlling the grain growth and migration on a CVD-grown MoS2 monolayer.

Hong, Sungwook↗

Temperature-Tuned Faceting and Shape Changes in Liquid Alkane Droplets

Recent extensive studies reveal that surfactant-stabilized spherical alkane emulsion droplets spontaneously adopt polyhedral shapes upon cooling below a temperature T d while remaining liquid. Further cooling induces the growth of tails and spontaneous droplet splitting. Two mechanisms were offered to account for these intriguing effects. One assigns the effects to the formation of an intradroplet frame of tubules consisting of crystalline rotator phases with cylindrically curved lattice planes. The second assigns the sphere-to-polyhedron transition to the buckling of defects in a crystalline interfacial monolayer, known to form in these systems at some T s > T d . The buckling reduces the extensional energy of the crystalline monolayer’s defects, unavoidably formed when wrapping a spherical droplet by a hexagonally packed interfacial monolayer. The tail growth, shape changes, and droplet splitting were assigned to the decrease and vanishing of surface tension, γ. Here we present temperature-dependent γ(T), optical microscopy measurements, and interfacial entropy determinations for several alkane/surfactant combinations. We demonstrate the advantages and accuracy of the in situ γ(T) measurements made simultaneously with the microscopy measurements on the same droplet. The in situ and coinciding ex situ Wilhelmy plate γ(T) measurements confirm the low interfacial tension, ≲0.1 mN/m, observed at T d . Here, our results provide strong quantitative support validating the crystalline monolayer buckling mechanism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Antifouling Properties of a Self-Assembling Glutamic Acid-Lysine Zwitterionic Polymer Surface Coating

There is a necessity for the development of antifouling materials to resist adsorption of biomacromolecules. Here we describe the preparation of a novel zwitterionic block copolymer with the potential to prevent or delay the formation of microbial biofilms. The block copolymer comprised a zwitterionic (hydrophilic) section of alternating glutamic acid (negatively charged) and lysine (positively charged) units and a hydrophobic polystyrene section. Cryo-TEM and dynamic light-scattering (DLS) results showed that, on average, the block copolymer self-assembled into 7-nm-diameter micelles in aqueous solutions (0 to 100 mM NaCl, pH 6). Quartz crystal microbalance with dissipation monitoring (QCM-D), atomic force microscopy (AFM), and contact angle measurements demonstrated that the block copolymer self-assembled into a brush-like monolayer on polystyrene surfaces. The brush-like monolayer produced from a 100 mg/L block copolymer solution exhibited an average distance, d, of approximately 4-8 nm between each block copolymer molecule (center to center). Once the brush-like monolayer self-assembled, it reduced EPS adsorption onto the polystyrene surface by similar to 70% (mass), reduced the rate of bacterial attachment by >80%, and inhibited the development of thick biofilms. QCM-D results revealed that the EPS molecules penetrate between the chains of the brush and adsorb onto the polystyrene surface. Additionally, AFM analyses showed that the brush-like monolayer prevents the adhesion of large (>d) hydrophilic colloids onto the surface via hydration repulsion; yet, molecules or colloids small enough to fit between the brush polymers (<d) were able to be adsorbed onto the surface via van der Waals interactions. Overall, we found that the penetration of extracellular organelles, as well as biopolymers through the brush, is essential for the failure of the antifouling coating, and likely could be prevented through tuning of the brush density. Stability and biofilm development testing on multiple surfaces (polypropylene, glass, and stainless steel) support practical applications of this novel block copolymer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Monochromatic Photocathodes from Graphene-Stabilized Diamondoids

The monochromatic photoemission from diamondoid monolayers provides a new strategy to create electron sources with low energy dispersion and enables compact electron guns with high brightness and low beam emittance for aberration-free imaging, lithography, and accelerators. However, these potential applications are hindered by degradation of diamondoid monolayers under photon irradiation and electron bombardment. Here, we report a graphene-protected diamondoid monolayer photocathode with 4-fold enhancement of stability compared to the bare diamondoid counterpart. The single-layer graphene overcoating preserves the monochromaticity of the photoelectrons, showing 12.5 meV ful width at half-maximum distribution of kinetic energy. Importantly, the graphene coating effectively suppresses desorption of the diamondoid monolayer, enhancing its thermal stability by at least 100 K. Furthermore, by comparing the decay rate at different photon energies, we identify electron bombardment as the principle decay pathway for diamondoids under graphene protection. As a result, this provides a generic approach for stabilizing volatile species on photocathode surfaces, which could greatly improve performance of electron emitters.

36 MATERIALS SCIENCE↗

Surfactant-Mediated Growth and Patterning of Atomically Thin Transition Metal Dichalcogenides

The role of additives in facilitating the growth of conventional semiconducting thin films is well-established. Apparently, their presence is also decisive in the growth of two-dimensional transition metal dichalcogenides (TMDs), yet their role remains ambiguous. In this work, we show that the use of sodium bromide enables synthesis of TMD monolayers via a surfactant-mediated growth mechanism, without introducing liquefaction of metal oxide precursors. We discovered that sodium ions provided by sodium bromide chemically passivate edges of growing molybdenum disulfide crystals, relaxing in-plane strains to suppress 3D islanding and promote monolayer growth. To exploit this growth model, molybdenum disulfide monolayers were directly grown into desired patterns using predeposited sodium bromide as a removable template. In conclusion, the surfactant-mediated growth not only extends the families of metal oxide precursors but also offers a way for lithography-free patterning of TMD monolayers on various surfaces to facilitate fabrication of atomically thin electronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Emergent Above-Gap Photoluminescence in Molecularly Engineered Hybrid Bilayer Crystals

Bilayer crystals, built by stacking two-dimensional (2D) covalent monolayers, give rise to coupled excitonic states whose properties are constrained by fixed lattice symmetry and orientation. Replacing one covalent monolayer with a 2D molecular crystal––held together by non-covalent forces––overcomes this limitation, as molecular functional groups afford tunable in-plane lattice geometry, intermolecular spacing, and interlayer coupling, providing a powerful knob for exciton engineering. Here, in this study, we report four-atom-thick hybrid bilayer crystals (HBCs) synthesized by directly growing single-crystalline PDI molecular crystal atop WS 2 monolayers, which exhibit a robust photoluminescence (PL) peak 120 meV above the WS 2 optical band gap alongside a belowgap emission. Both peaks display strong polarization anisotropy—nearing unity for the above-gap emission—and maintain a perfectly linear power-law dependence up to an excitation density of ~10 7 mW/cm 2 , indicative of coexisting localized and delocalized excitonic states. Substituting PDI with a PTCDA monolayer on WS 2 fully quenches PL, demonstrating molecular control over excitonic emission. Lattice scale ab initio GW and GW-BSE calculations reveal a significantly hybridized bilayer band structure in PDI/WS 2 that supports interlayer excitonic species both above and below the WS 2 gap with strong polarization anisotropy, in excellent agreement with experiment. Our work introduces a molecule-based bilayer platform for the bottom-up design and control of excitonic phenomena in atomically thin optoelectronic and quantum materials.

2D materials↗

Patterned, Low-Temperature Growth of Transition Metal Dichalcogenides for Low Resistance Raised Contacts

Transition metal dichalcogenide (TMD) monolayers are promising channel materials for next-generation electronic devices. A challenge is the high contact resistance between monolayer TMDs and metal contacts, especially for holes. Here, in this regard, raised source/drain contacts are promising. However, the direct, patterned growth of raised contacts at CMOS-compatible temperatures remains largely unresolved. We present plasma-free selenization and sulfurization of metal oxides at substrate temperatures down to 400 °C, compatible with back-end-of-line thermal budgets. To achieve growth at such temperatures, gas-phase chalcogen precursors are first thermally activated at 950 °C. Films grown on single-crystal monolayer TMDs exhibit high crystal quality, as confirmed by transmission electron microscopy. Raised contacts on WSe 2 monolayers fabricated using this approach yield a low hole contact resistance of 0.3 kΩ·μm after chemical doping. This process is shown to be applicable to growing various TMDs, including WS 2 , MoSe 2 , MoS 2 , PtSe 2 , and NbS 2 .

contact engineering↗

High Luminescence Efficiency in MoS 2 Grown by Chemical Vapor Deposition

We report that one of the major challenges facing the rapidly growing field of two-dimensional (2D) transition metal dichalcogenides (TMDCs) is the development of growth techniques to enable large-area synthesis of high-quality materials. Chemical vapor deposition (CVD) is one of the leading techniques for the synthesis of TMDCs; however, the quality of the material produced is limited by defects formed during the growth process. A very useful nondestructive technique that can be utilized to probe defects in semiconductors is the room-temperature photoluminescence (PL) quantum yield (QY). It was recently demonstrated that a PL QY near 100% can be obtained in MoS 2 and WS 2 monolayers prepared by micromechanical exfoliation by treating samples with an organic superacid: bis(trifluoromethane)sulfonimide (TFSI). Here we have performed a thorough exploration of this chemical treatment on CVD-grown MoS 2 samples. We find that the as-grown monolayers must be transferred to a secondary substrate, which releases strain, to obtain high QY by TFSI treatment. Furthermore, we find that the sulfur precursor temperature during synthesis of the MoS 2 plays a critical role in the effectiveness of the treatment. By satisfying the aforementioned conditions we show that the PL QY of CVD-grown monolayers can be improved from ~0.1% in the as-grown case to ~30% after treatment, with enhancement factors ranging from 100 to 1500× depending on the initial monolayer quality. We also found that after TFSI treatment the PL emission from MoS 2 films was visible by eye despite the low absorption (5–10%). Lastly, the discovery of an effective passivation strategy will speed the development of scalable high-performance optoelectronic and electronic devices based on MoS 2 .

36 MATERIALS SCIENCE↗

Intrinsic Optoelectronic Characteristics of MoS 2 Phototransistors via a Fully Transparent van der Waals Heterostructure

In the past decade, intensive studies on monolayer MoS 2 -based phototransistors have been carried out to achieve further enhanced optoelectronic characteristics. However, the intrinsic optoelectronic characteristics of monolayer MoS 2 have still not been explored until now because of unintended interferences, such as multiple reflections of incident light originating from commonly used opaque substrates. This leads to overestimated photoresponsive characteristics inevitably due to the enhanced photogating and photoconductive effects. Here in this paper, we reveal the intrinsic photoresponsive characteristics of monolayer MoS 2 , including its internal responsivity and quantum efficiency, in fully transparent monolayer MoS 2 phototransistors employing a van der Waals heterostructure. Interestingly, as opposed to the previous reports, the internal photoresponsive characteristics do not significantly depend on the wavelength of the incident light as long as the electron-hole pairs are generated in the same k-space. This study provides a deeper understanding of the photoresponsive characteristics of MoS 2 and lays the foundation for two-dimensional materials-based transparent phototransistors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface-induced anisotropic orientations of interfacial ethanol molecules at air/sapphire (1-102) and ethanol/sapphire (1-102) interfaces

Sum frequency vibrational spectroscopy was used to study the interfacial arrangement of ethanol molecules at the vapor/α-Al{sub 2}O{sub 3} (1{bar 1}02 ) and α-Al{sub 2}O{sub 3} (1{bar 1}02 )/ethanol liquid interfaces. The spectra in the C-H range show that ethanol molecules adsorbed from vapor onto α-Al{sub 2}O{sub 3} (1{bar 1}02 ) surface have a welldefined anisotropic arrangement following the structure of the α-Al{sub 2}O{sub 3} (1{bar 1}02 ) surface. The arrangement can be explained by the formation of two specific hydrogen bonds between the adsorbed ethanol molecule and hydroxyls on the sapphire surface. At the α-Al{sub 2}O{sub 3} (1{bar 1}02 )/ethanol liquid interface, the first ethanol monolayer assumes a similar anisotropic arrangement as in the case of an ethanol monolayer on the dry sapphire surface. The second monolayer has a rather broad orientation distribution that is azimuthally nearly isotropic, but with molecules flipped 180 degrees with respect to those in the first monolayer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗