Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mill”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

High-strength bioresorbable Fe–Ag nanocomposite scaffolds: Processing and properties

High strength ductile iron-silver nanocomposite scaffolds were fabricated employing high energy attrition milling of micron-submicron powders, followed by cold sintering/high pressure consolidation. Particulate leaching method with soluble Na{sub 2}SO{sub 4} and K{sub 2}CO{sub 3} salts as porogens was used to create scaffolds with 50, 55, 60 and 73% volume fraction of pores. Part of specimens was annealed at 600, 800 and 900°C. Specimens were characterized employing X-ray diffraction, scanning electron microscopy (SEM) with electron probe microanalysis (EDS) and high resolution SEM. Mechanical properties were measured in compression and permeability was measured in permeameter based on Darcy’s law. Scaffolds with 50% and 55% porosity exhibited high compressive strength (18–22 MPa), compressive strength of 8–12 MPa was observed for scaffolds with 73% porosity. Treatments at 800 and 900°C result in increase of strength and ductility with some coarsening of microstructure. Best combination of compressive strength (15 MPa) and permeability (0.6{sup −6} cm{sup 2}) is close to the range of trabecular bone.

36 MATERIALS SCIENCE↗

Two planar polishing methods by using FIB technique: Toward ultimate top-down delayering for failure analysis

Presently two major limiting factors are hindering the failure analysis (FA) development during the semiconductor manufacturing process and technology improvement: (1) Impossibility of manual polishing on the edge dies due to the amenability of layer peeling off; (2) Abundant demand of multi-locations FA, especially focusing different levels of layers simultaneously. Aiming at resolving these limitations, here we demonstrate two unique high precision polishing methods by using focused ion beam (FIB) technique. One is the vertical top down chemical etching at the aimed location; the other one is the planar top down slicing. Using the FIB for delayering not only solves these problems mentioned above, but also offers significant advantages over physical planar polishing methods such as: (1) having a better control of the delayering progress, (2) enabling precisely milling at a region of interest, (3) providing the prevention of over-delayering and (4) possessing capability to capture images at the region of interest simultaneously and cut into the die directly to expose the exact failure without damaging other sections of the specimen.

36 MATERIALS SCIENCE↗

Design and optimization of a harmonic probe with step cross section in multifrequency atomic force microscopy

In multifrequency atomic force microscopy (AFM), probe’s characteristic of assigning resonance frequencies to integer harmonics results in a remarkable improvement of detection sensitivity at specific harmonic components. The selection criterion of harmonic order is based on its amplitude’s sensitivity on material properties, e.g., elasticity. Previous studies on designing harmonic probe are unable to provide a large design capability along with maintaining the structural integrity. Herein, we propose a harmonic probe with step cross section, in which it has variable width in top and bottom steps, while the middle step in cross section is kept constant. Higher order resonance frequencies are tailored to be integer times of fundamental resonance frequency. The probe design is implemented within a structural optimization framework. The optimally designed probe is micromachined using focused ion beam milling technique, and then measured with an AFM. The measurement results agree well with our resonance frequency assignment requirement.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Random center vortex lines in continuous 3D space-time

We present a model of center vortices, represented by closed random lines in continuous 2+1-dimensional space-time. These random lines are modeled as being piece-wise linear and an ensemble is generated by Monte Carlo methods. The physical space in which the vortex lines are defined is a cuboid with periodic boundary conditions. Besides moving, growing and shrinking of the vortex configuration, also reconnections are allowed. Our ensemble therefore contains not a fixed, but a variable number of closed vortex lines. This is expected to be important for realizing the deconfining phase transition. Using the model, we study both vortex percolation and the potential V(R) between quark and anti-quark as a function of distance R at different vortex densities, vortex segment lengths, reconnection conditions and at different temperatures. We have found three deconfinement phase transitions, as a function of density, as a function of vortex segment length, and as a function of temperature. The model reproduces the qualitative features of confinement physics seen in SU(2) Yang-Mills theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The critical end point through observables

We develop the model of the critical phenomena of strongly interacting matter at high temperatures and baryon densities. The dual Yang-Mills theory with scalar degrees of freedom (the dilatons) is used. The dilatons are the consequence of a spontaneous breaking of a scale symmetry. The phase transitions are considered in systems where the field conjugate to the order parameter has the critical end mode. The critical end point (CEP) is a distinct singular feature existence of which is dictated by the chiral dynamics. The physical realization of CEP is via the influence quantum fluctuations of two-body Bose-Einstein correlations for observed particles to which the critical end mode couples.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Baryon and lepton number violating effective operators in a non-universal extension of the standard model

It is well known that non-abelian Yang-Mills theories present non-trivial minima of the action, the so-called instantons. In the context of electroweak theories these instanton solutions may induce violations of baryon and lepton number of the form ΔB = ΔL = n{sub f}, with n{sub f} being the number of families coupled to the gauge group. An interesting feature of these violations is that the flavor structure of the gauge couplings is inherited by the instanton transitions. This effect is generally neglected in the literature. We will show that the inclusion of flavor interactions in the instanton solutions may be interesting in certain theoretical frameworks and will provide an approach to include these effects. In particular we will perform this implementation in the non-universal SU (2){sub l} ⊗SU (2){sub h} ⊗U (1){sub Y} model that singularizes the third family. Within this framework, we will use the instanton transitions to set a bound on the SU (2){sub h} gauge coupling.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Submicron R{sub 2}Fe{sub 14}B particles

Mechanochemical synthesis of submicron R{sub 2}Fe{sub 14}B particles with R = Dy, Nd, Pr has been performed successfully via high energy ball milling of rare-earth oxides, iron oxide and boron oxide in the presence of a reducing agent (Ca) and a dispersant material (CaO), followed by annealing at 800 - 900 °C. In the R = Nd system, we were able to fabricate particles embedded in a CaO matrix with coercivity (H{sub c}) of 10.3 kOe after annealing at 900 °C for 5 min. After washing off the dispersant, the H{sub c} was decreased to below 1 kOe because of hydrogen absorption that leads to the formation of the hydrated R{sub 2}Fe{sub 14}BH{sub x} phase that has a lower anisotropy. Upon removal of the hydrogen the coercivity was increased to 3.3 kOe. The average size of the Nd{sub 2}Fe{sub 14}B particles increases from 100 nm in a sample synthesized at 800 °C to 158 nm at 900 °C. The isotropic Dy{sub 2}Fe{sub 14}B particles showed a higher coercivity of 21 kOe in washed samples after annealing at 900 °C for 5 min. An average size of 71 nm is measured in samples synthesized at 800 °C and 107 nm at 900 °C. Fitting the high field M(H) measurements in Nd{sub 2}Fe{sub 14}B to the law of approach to saturation gave values for the magnetocrystalline anisotropy for the washed sample 2.23 × 10{sup 7} erg/cm{sup 3} and for the vacuum annealed sample 4.15 × 10{sup 7} erg/cm{sup 3}, both of which are lower than the bulk values. This would explain the lower values of H{sub c} observed in the particles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and characteristic of nanocrystalline La{sub 0.7}Sr{sub 0.3}MnO{sub 3} manganites by solid state reaction route

Nanocrystalline stoichiometric La{sub 0.7}Sr{sub 0.3}MnO{sub 3} (x=0.3) manganites have been synthesized through solid-state reaction by ball milling mechanical method at two different sintering temperatures 1250°C and 1350°C. The synthesized samples were characterized using X-ray diffraction (XRD) and found to have rhombohedral crystal structure (R-3c). The calcined samples exhibited a pure single phase perovskite, had a crystallite size of about 47-51 nm. The morphology of the prepared nanocrystalline manganites were recorded by the field emission gun-scanning electron microscope (FEG-SEM) and EDAX.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Giant dielectric permittivity and weak ferromagnetic behavior in Bi{sub 0.5}La{sub 0.5}Fe{sub 0.5}Cr{sub 0.5}O{sub 3} ceramic

A pervoskite (Bi{sub 0.5}La{sub 0.5})(Fe{sub 0.5}Cr{sub 0.5})O{sub 3} (BLFC) nanoparticles were synthesized by high energy ball milling. Rietveld refined X-ray diffraction studies revealed that this compound shows orthorhombic structure with Pbnm space group. The dielectric studies were investigated in wide frequency (10{sup 2}-10{sup 6}) range indicating giant dielectric permittivity behavior similar to LaFeO{sub 3} ceramic. The noted dielectric loss relaxation frequency dependent is as following the Arrhenius law can be ascribed as polaronic conduction. Further, magnetic transition at around 337 K and coexistence of weak ferromagnetic and antiferromagnetic behavior is observed below magnetic transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dielectric and AC conductivity studies of Nd substituted 0.8BaTiO{sub 3}-0.2(Bi{sub 0.5(1-x)}Nd{sub 0.5x}K{sub 0.5})TiO{sub 3} lead free ceramics

0.8BaTiO{sub 3} – 0.2(Bi{sub 0.5(1-x)}Nd{sub 0.5x}K{sub 0.5})TiO{sub 3} (0.01 ≤ x ≤ 0.06) lead free ceramic materials have been prepared by solid state reaction method and followed by high energy ball milling process. X-ray diffraction studies confirm the tetragonal structure of the materials at room temperature. Lattice parameters and density are decreasing with increase of Nd substitution. Microstructure studies were done by using Scanning electron microscope and it found that grain size is decreasing with increase of Nd substitution. Temperature and frequency dependent dielectric studies reveal relaxor behaviour of the materials. Dielectric constant, dielectric loss and Curie temperature are decreasing with Nd substitution. Maximum Curie temperature of 195°C was observed at 1 MHz for x=0.01 Nd substituted sample. Degree of diffuseness was calculated from the modified Curie-Weiss law and it is increasing with Nd substitution. AC conductivity is increasing with increase of Nd substitution and observed maximum activation energy of 0.52 eV for x=0.02 Nd substituted sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Size dependent polaronic conduction in hematite

Lithium Ion Batteries have been attracted as the major renewable energy source for all portable electronic devices because of its advantages like superior energy density, high theoretical capacity, high specific energy, stable cycling and less memory effects. Recently, α-Fe{sub 2}O{sub 3} has been considered as a potential anode material due to high specific capacity, low cost, high abundance and environmental benignity. We have synthesized α-Fe{sub 2}O{sub 3} with various sizes by using the ball milling and sol-gel procedure. Here, we report the dc conductivity measurement for the crystallite size ranging from 15 nm to 50 nm. It has been observed that the enhancement in the polaronic conductivity nearly two orders in magnitude while reducing the crystallite size from bulk into nano scale level. The enhancement in the conductivity is due to the augmented to compressive strain developed in the material which leads to pronounced decrease in the hopping length of polarons. Thus, nanocrystaline α-Fe{sub 2}O{sub 3} may be a better alternative anode material for lithium ion batteries than earlier reported systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and electrical properties of T′-type Ln{sub 2}CuO{sub 4} (Ln = Pr, Nd, Sm, Eu and Gd) ceramics

T′-type Ln{sub 2}CuO{sub 4} (Ln = Pr, Nd, Sm, Eu and Gd) were successfully synthesized in phase pure form using conventional solid state reaction and sintering route. For all the Ln{sub 2}CuO{sub 4} samples, the solid state reaction temperature was found to be 950 °C and pure phase was realized only after 2-3 intermediate milling and solid state reaction cycles, irrespective of the lanthanide ion radius. Effect of lanthanide ion contraction on the structural properties was clearly revealed by the powder X-ray diffraction, with the XRD peaks observed to be shifting towards higher 2θ values with the decrease in Ln ionic radii. The optimum sintering temperature of these solid state reacted Ln{sub 2}CuO{sub 4} powder was found to be 1100 °C except for Pr{sub 2}CuO{sub 4} powder. The conductivity of these samples were tested over a wide temperature range (−100 to 150 °C), an anomaly was observed in the conductivity of all the Ln{sub 2}CuO{sub 4} samples near the antiferromagnetic ordering temperature of Cu (~ 30 °C), thus suggesting the bearing of ordering of magnetic moments on the electrical properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase stability and lattice thermal conductivity reduction in CoSb{sub 3} skutterudites, doped with chalcogen atoms

We report a significant reduction in the lattice thermal conductivity of the CoSb{sub 3} skuttertudites, doped with chalcogen atoms. Te/Se chalcogen atoms doped CoSb{sub 3} skutterudite samples (Te{sub 0.1}Co{sub 4}Sb{sub 12}, Se{sub 0.1}Co{sub 4}Sb{sub 12}, Te{sub 0.05}Se{sub 0.05}Co{sub 4}Sb{sub 12}) are processed by ball milling and spark plasma sintering. X-ray diffraction data combined with energy dispersive X-ray spectra indicate the doping of Te/Se chalcogen atoms in the skutterudite. The temperature dependent X-ray diffraction confirms the stability of the Te/Se doped CoSb{sub 3} skutterudite phase and absence of any secondary phase in the temperature range starting from 300 K to 773 K. The Raman spectroscopy reveals that different chalcogen dopant atoms cause different resonant optical vibrational modes between the dopant atom and the host CoSb{sub 3} skutterudite lattice. These optical vibrational modes do scatter heat carrying acoustic phonons in a different spectral range. It was found that among the Te/Se chalcogen atoms, Te atoms alter the host CoSb{sub 3} skutterudite lattice vibrations to a larger extent than Se atoms, and can potentially scatter more Sb related acoustic phonons. The Debye model of lattice thermal conductivity confirms that the resonant phonon scattering has important contributions to the reduction of lattice thermal conductivity in CoSb{sub 3} skutterudites doped with Te/Se chalcogen atoms. Lattice thermal conductivity ∼ 0.9 W/mK at 773 K is achieved in Te{sub 0.1}Co{sub 4}Sb{sub 12} skutterudites, which is the lowest value reported so far in CoSb{sub 3} skutterudites, doped with single Te chalcogen atom.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Depletion region surface effects in electron beam induced current measurements

Electron beam induced current (EBIC) is a powerful characterization technique which offers the high spatial resolution needed to study polycrystalline solar cells. Current models of EBIC assume that excitations in the p-n junction depletion region result in perfect charge collection efficiency. However, we find that in CdTe and Si samples prepared by focused ion beam (FIB) milling, there is a reduced and nonuniform EBIC lineshape for excitations in the depletion region. Motivated by this, we present a model of the EBIC response for excitations in the depletion region which includes the effects of surface recombination from both charge-neutral and charged surfaces. For neutral surfaces, we present a simple analytical formula which describes the numerical data well, while the charged surface response depends qualitatively on the location of the surface Fermi level relative to the bulk Fermi level. We find that the experimental data on FIB-prepared Si solar cells are most consistent with a charged surface and discuss the implications for EBIC experiments on polycrystalline materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

BCFW tilings and cluster adjacency for the amplituhedron

In 2005, Britto, Cachazo, Feng, and Witten gave a recurrence (now known as the BCFW recurrence) for computing scattering amplitudes in N = 4 super Yang–Mills theory. Arkani-Hamed and Trnka subsequently introduced the amplituhedron to give a geometric interpretation of the BCFW recurrence. Arkani-Hamed and Trnka conjectured that each way of iterating the BCFW recurrence gives a “triangulation” or “tiling” of the m=4 amplituhedron. In this article, we prove the BCFW tiling conjecture of Arkani-Hamed and Trnka. We also prove the cluster adjacency conjecture for BCFW tiles of the amplituhedron, which says that facets of tiles are cut out by collections of compatible cluster variables for the Grassmannian Gr4,n. Moreover we show that each BCFW tile is the subset of the Grassmannian where certain cluster variables have particular signs.

97 MATHEMATICS AND COMPUTING↗

Composite inflation confronts BICEP2 and PLANCK

We examine observational constraints on single-field inflation in which the inflaton is a composite field stemming from a four-dimensional strongly interacting field theory. We confront the predictions with the Planck and very recent BICEP2 data. In the large non-minimal coupling regions, we discover for the minimal composite inflationary model that the predictions lie well inside the joint 68% CL for the Planck data, but is in tension with the recent BICEP2 observations. In the case of the glueball inflationary model, the predictions satisfy the Planck results. However, this model can produce a large tensor-to-scalar ratio consistent with the recent BICEP2 observations if the number of e-foldings is slightly smaller than the range commonly used. For a super Yang-Mills paradigm, we discover that the predictions satisfy the Planck data, and surprisingly a large tensor-to-scalar ratio consistent with the BICEP2 results can also be produced for an acceptable range of the number of e-foldings and of the confining scale. In the small non-minimal coupling regions, all of the models can satisfy the BICEP2 results. However, the predictions of the glueball and superglueball inflationary models cannot satisfy the observational bound on the amplitude of the curvature perturbation launched by Planck, and the techni-inflaton self-coupling in the minimal composite inflationary model is constrained to be extremely small.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Scattering Amplitudes: The Most Perfect Microscopic Structures in the Universe

This article gives an overview of many of the recent developments in understanding the structure of relativistic scattering amplitudes in gauge theories ranging from QCD to N = 4 super-Yang-Mills theory, as well as (super)gravity. I also provide a pedagogical introduction to some of the basic tools used to organize and illuminate the color and kinematic structure of amplitudes. This article is an invited review introducing a special issue of Journal of Physics A devoted to 'Scattering Amplitudes in Gauge Theories'.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effects of focused ion beam induced damage on the plasticity of micropillars

The hardening effects of focused ion beam (FIB) induced damage produced during the fabrication of micropillars are examined by introducing a surface layer of nanosized obstacles into a dislocation dynamics simulation. The influence of the depth and strength of the obstacles as a function of pillar diameter is assessed parametrically. We show that for a selected set of sample sizes between 0.5 and 1.0 {mu}m, the flow strength can increase by 10-20 %, for an obstacle strength of 750 MPa, and damage depth of 100 nm. On the other hand, for sizes larger and smaller than this range, the effect of damage is negligible. Results show that the obstacles formed during the FIB milling may be expected to alter the microstructure of micropillars, however, they have a negligible effect on the observed size-strength scaling laws.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗