Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flight computers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Preliminary evaluation of the airborne imaging spectrometer for vegetation analysis in the Klamath National Forest of northeastern California

The experiences and results associated with a project entitled Preliminary Evaluation of the Airborne Imaging Spectrometer for Vegetation Analysis is documented. The primary goal of the project was to provide ground truth, manual interpretation, and computer processing of data from an experimental flight of the Airborne Infrared Spectrometer (AIS) to determine the extent to which high spectral resolution remote sensing could differentiate among plant species, and especially species of conifers, for a naturally vegetated test site. Through the course of the research, JPL acquired AIS imagery of the test areas in the Klamath National Forest, northeastern California, on two overflights of both the Dock Well and Grass Lake transects. Over the next year or so, three generations of data was also received: first overflight, second overflight, and reprocessed second overflight. Two field visits were made: one trip immediately following the first overflight to note snow conditions and temporally-related vegetation states at the time of the sensor overpass; and a second trip about six weeks later, following acquisition of prints of the images from the first AIS overpass.

Strahler, A. H.↗

A Vibroacoustic Database Management Center for Shuttle and expendable launch vehicle payloads

A Vibroacoustic Database Management Center has recently been established at the Jet Propulsion Laboratory (JPL). The center uses the Vibroacoustic Payload Environment Prediction System (VAPEPS) computer program to maintain a database of flight and ground-test data and structural parameters for both Shuttle and expendable launch-vehicle payloads. Given the launch-vehicle environment, the VAPEPS prediction software, which employs Statistical Energy Analysis (SEA) methods, can be used with or without the database to establish the vibroacoustic environment for new payload components. This paper summarizes the VAPEPS program and describes the functions of the Database Management Center at JPL.

Thomas, Valerie C.↗

Numerical simulation of helicopter multi-bladed rotor flow

A numerical method for solving the Euler equations for multiblade rotors has been developed. The computed results, including one nonlifting forward-flight and several lifting hovering cases, are compared with experimental data. For forward-flight case, the unsteady growth and decay of the shock agree well with experimental results. For hovering case, at low and moderate transonic tip speed, the results show good agreement with experimental data in the tip region. The near-wake effects can be captured without wake modeling.

Chen, C. L.↗

Atmospheric effect on spectral signature - Measurements

In order to study the spectral atmospheric effect on remote sensing, measurements of the spectral signature of surface cover were conducted during hazy conditions. Simultaneous measurements of the aerosol optical thickness and its vertical distribution were carried out. The upward radiance in high flight were also simulated by radiative transfer computations, and the results were compared with the measurements. It is suggested that the radiances over dark areas can be used to derive the aerosol optical thickness. Combined with climatological information, the derived optical thickness can be used to perform corrections of the atmospheric effect.

Kaufman, Yoram J.↗

Radiation dose and shielding for the space station

Significant differences in dose prediction for Space Station arise depending on whether or not the magnetic field model is extrapolated into the future. The basis for these calculations is examined in detail, and the importance of the residual atmospheric layer at altitudes below 1000 km, with respect to radiation attenuation, is emphasized. Dosimetry results from Shuttle flights are presented and compared with the computed results. It is recommended that, at this stage, no extrapolation of the magnetic field into the future be included in the calculations. A model adjustment, to replace this arbitrary procedure, is presented. Dose predictions indicate that, at altitudes below 500 km and at low inclination, and with nominal module wall thickness (0.125 in. aluminum), orbit stay times of 90 days in Space Station would result in quarterly radiation doses to the crew, which are well within present limits for both males and females. Countermeasures would be required for stay times of a year or more and the measure of increasing shielding is examined.

Mccormack, Percival D.↗

Numerical simulation of high-incidence flow over the F-18 fuselage forebody

As part of the NASA High Alpha Technology Program, fine-grid Navier-Stokes solutions have been obtained for flow over the fuselage forebody and wing leading-edge extension of the F/A-18 High Alpha Research Vehicle at large incidence. The resulting flows are complex and exhibit cross-flow separation from the sides of the forebody and from the leading-edge extension. A well-defined vortex pattern is observed in the leeward-side flow. Results obtained for laminar flow show good agreement with flow visualizations obtained in ground-based experiments. Further, turbulent flows computed at high-Reynolds-number flight-test conditions show good agreement with surface and off-surface visualizations obtained in flight.

Schiff, Lewis B.↗

Development of AFE aerobrake aerothermodynamic data book

The computation method developed for the NASA Aeroassist Flight Experiment (AFE) data book generates a design reference for the AFE's aerothermodynamic environment using an optimized technology for a 4100-lb vehicle. This environment is defined by convective, radiative, and total heating rates, radiation equilibrium temperatures, and local surface pressures along the AFE pitch-plane and associated off-pitch planes. The Boundary Layer Integral Matrix Procedure is the major program code used in this analysis; a partially catalytic wall was assumed on the basis of measured recombination rates.

Ting, Paul C.↗

Establishing a measurement based maintenance improvement program - Lessons learned in the SEL

The Software Engineering Laboratory (SEL) is a joint venture between NASA's Goddard Space Flight Center, the University of Maryland, and Computer Sciences Corporation. The use of a goal-oriented approach to measurement to establish a maintenance improvement program within the SEL is discussed. Differences are found to exist between the initial phase of the program and its routine application. This approach is demonstrated through concrete examples, and lessons learned in the establishment of a measurement based, maintenance improvement program are summarized.

Rombach, H. Dieter↗

Application of vortex embedding to aircraft flows

A combined Eulerian/Lagrangian 'vortex embedding' method was applied to two cases. The first case involved compressible flow over a realistic fighter aircraft (X-29 fighter) at low angle of attack, for both subsonic and transonic speeds, with shock. Good agreement was obtained for computed wing surface pressures when compared to flight test data. The second case involved incompressible flow over a delta wing with round leading edges at moderate angles of attack. Strong, concentrated vortices were shown to be shed from the leading edge. The vortex embedding method appears to be an efficient solution procedure for cases where well-defined vortex sheets are shed from surfaces.

Steinhoff, John↗

Proceedings of the Thirteenth Annual Software Engineering Workshop

Topics covered in the workshop included studies and experiments conducted in the Software Engineering Laboratory (SEL), a cooperative effort of NASA Goddard Space Flight Center, the University of Maryland, and Computer Sciences Corporation; software models; software products; and software tools.

Source record↗

Numerical simulation of F-18 fuselage forebody flows at high angles of attack

Fine-grid Navier-Stokes solutions were obtained for flow over the fuselage forebody and wing leading edge extension of the F/A-18 High Alpha Research Vehicle at large incidence. The resulting flows are complex, and exhibit cross flow separation from the sides of the forebody and from the leading edge extension. A well-defined vortex pattern is observed in the leeward-side flow. Results obtained for laminar flow show good agreement with flow visualizations obtained in ground-based experiments. Further, turbulent flows computed at high Reynolds-number flight-test conditions show good agreement with surface and off-surface visualizations obtained in flight.

Schiff, Lewis B.↗

CFD code validation for nozzle flowfields

Renewed interest in hypersonic airbreathing flight has resulted in heavy reliance on computational fluid dynamics for all aspects of aerodynamic and scramjet component modeling. Credible numerical performance predictions require calibration to unit type flowfields. This paper presents results of one such calibration to nonreacting simulated scramjet nozzle flowfields. The experimental test program was performed on a static thrust stand. Computed results are in excellent agreement with measured wall pressure, pitot pressure profiles, and thrust. Agreement with thrust is shown to be within the reported accuracy of the experimental measurements.

Jentink, Thomas N.↗

Research and technology, 1991

NASA Lewis' research and technology accomplishments are summarized for the fiscal year 1991. Approximately 150 articles are presented which were submitted by the technical directorates. There are six major sections: Aeronautics; Aerospace technology; Space flight systems; Space Station Freedom; Engineering and Computational support; and Lewis Research Academy. A table of contents by subject was developed to assist the reader in finding articles of special interest. For each article, a Lewis contact person is identified, and where possible, a reference document is listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible.

Source record↗

Dynamics modeling for ERBS attitude propagation

The development and evaluation of a model of the Earth Radiation Budget Satellite (ERBS) attitude dynamics for use in attitude determination is described. Attitude rates for the three axis stabilized spacecraft are derived analytically from Euler's equation using modeled disturbance torques and telemetered flight data from control system actuators for computation of the control torques. The modeled rates are used for attitude propagation in a batch least squares attitude estimation algorithm originally designed to use onboard gyro measurements of attitude motion. The capabilities for near fine attitude determination without gyros is important for operational attitude ground support of the aging ERBS spacecraft as two out of three gyro axes have failed. The accuracy of this method of dynamic propagation is strongly dependent on the quality and availability of control system telemetry data. Detailed disturbance torque models are also necessary to accurately model attitude rates. Even with the relatively coarse ERBS control system telemetry, accuracy to within 0.2 deg of gyro propagated reference attitudes is achieved.

Harvie, E.↗

Application of space-marching methods to hypersonic forebody flow fields

The heavy reliance on CFD in the design of hypersonic flight vehicles emphasizes the importance of choosing computationally efficient techniques. As a result, the development and application of space-marching flow solvers for the parabolized Navier-Stokes equations have received considerable attention in the past decade. This paper summarizes a space-marching approach used at NASA Ames Research Center for the analysis of hypersonic vehicle forebodies. Aspects of the simulation process are addressed that contain features unique to space-marching flow solvers, such as grid generation, initial condition specification, and finite-rate chemistry models. For completeness, sections are also included on turbulence modeling and equilibrium air chemistry modeling. The discussion includes an overview of the computational methods utilized as well as a number of relevant results.

Lawrence, Scott L.↗

Consideration of dynamic loads on the vertical tail by the theory of flat yawing maneuvers

Dynamic yawing effects on vertical tail loads are considered by a theory of flat yawing maneuvers. A comparison is shown between computed loads and the loads measured in flight in a fighter airplane. The dynamic effects were investigated on a large flying boat for both an abrupt rudder deflection and a sinusoidal rudder deflection. Only a moderate amount of control deflection was found to be necessary to attain the ultimate design load on the tail. In order to take into account dynamic effects in design, specifications of yawing maneuverability or control movement are needed.

Boshar, John↗

Consideration of dynamic loads on the vertical tail by the theory of flat yawing maneuvers

Dynamic yawing effects on vertical-tail loads are considered by a theory of flat yawing maneuvers. A comparison is shown between computed loads and the loads measured in flight on a fighter airplane. The dynamic effects were investigated on a large flying boat for both an abrupt rudder deflection and sinusoidal rudder deflection. Only a moderate amount of control deflection was found to be necessary to attain the ultimate design load on the tail. In order to take into account dynamic effects in design, specifications of yawing maneuverability or control movement are needed.

Boshar, John↗

Computing in space: Issues and answers

Future plans for space exploration call for scientific instruments whose data is increasingly voluminous, far exceeding constraints set by telemetry rates, and therefore, an increased role for spaceborne computing. Three issues that greatly influence the realization of spaceborne computing systems are addressed. The first involves the identification of those research problems which are unique to space computing. Resources must be expended on these problems if efforts are to add value to, and have impact on, the technology of computing in space. The second addresses the transfer of new technology from the research laboratory to use in space. What can be done to expedite this process and shrink the technology gap that separates Earth and space based systems must be assessed. The third issue involves the user's point of view of what is required of new space computing systems. That is, what are the driving forces that most influence customers' decisions to use or not use new technology? Issues of design environment for spaceborne computers, tools for modeling and evaluation of flight systems, and validation of space flight hardware and software are also discussed.

Davidson, John M.↗