SEARCH · Engineering Papers

Results for “filter methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Near-infrared noise in intense electron bunches

This article investigates electron bunch density fluctuations in the 1 −10 μ⁢m wavelength range, focusing on their impact on coherent electron cooling (CEC) in hadron storage rings. In this study, we compare the shot-noise model with experimental observations using bandwidth-filtered near-infrared optical transition radiation (OTR) photodiode signals, where the transverse bunch size is much larger than the OTR wavelength of interest. The relativistic electron bunch (𝛾 ≈ 50) parameters are close to those proposed for the coherent electron cooler in the electron-ion collider (EIC) project. Preliminary feasibility experiments were conducted, and the noise factors are presented, supported by particle tracking. No major density fluctuations or effective cooling rate decrease were revealed for EIC CEC design parameters. Additionally, longitudinal-space-charge-induced microbunching for the chicane-compressed bunch was observed with coherent OTR enhancements up to 100 times, providing further calibration of the measurement method.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

Results of Speciation Determination Measurements of Insulating Sulfur Hexafluoride Gas

Under the direction of the NNSA NA-231 Mo-99 Program, SRNL has provided technical assistance to U.S. companies under cooperative agreements. One such area of technical assistance has been for the recommendation for contamination management methods in the eventuality that tritium contaminates the insulating gas of a high-voltage ion source used in the accelerator-based process developed by SHINE Medical Technologies to produce Mo-99. The SHINE accelerator process uses tritium as the target of a deuterium ion beam, where the ion beam is produced within a high-voltage ion source insulated with sulfur hexafluoride (SF 6 ), and is separated from the tritium target by an extensive pump train. Normal operating conditions preclude the conditions necessary for contamination of the insulating gas, however certain atypical conditions could result in a tritium contamination event. Accelerator based processes for medical isotope production represent an anomalous tritium contamination challenge due to the presence of SF 6 . SF 6 decomposes through normal use as an insulator gas, and the exact speciation of the decomposition byproducts depends on a variety of factors. This creates a scenario where the anticipation of species present in the insulating gas mixture is difficult. In turn, the fate of tritium within such a chemical system is unclear. This document discusses the results of measurements made in-situ of the SF 6 insulating gas in use within a SHINE Medical Technology’s high-voltage ion source. This was done in an effort to determine the chemical speciation of the gas, allowing for the recommendation of management strategies in the event that tritium contaminates the insulating gas. The results of the measurements reported in this work suggest that tritium contamination in the insulating gas may result in two chemical forms of tritium in the system, tritiated water and molecular tritium. These two forms of tritium would be captured by two methods. Tritiated water may be captured and removed from the SF 6 by an adsorbent canister already present within the pressure vessel that houses the insulating gas while in use. It may also be separated from the SF 6 during routine purification of the SF 6 , which is performed by SHINE personnel routinely. The purification cart will perform all non-embedded systems cleanup necessary to remediate tritiated species in the system. The purification cart passes the insulating gas through several filters, followed by the liquefication of the SF 6 . The filters will separate tritiated water from the SF 6 at this stage. It is expected that molecular tritium will accumulate in the gas-phase during the liquification step, which is separated and stored. Tritium may be recovered from this mixture through more conventional hydrogen purification methods such as a palladium diffuser.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2021

Examination of probability distribution of mixture fraction in LES/FDF modelling of a turbulent partially premixed jet flame

An accurate prediction of the probability density function (PDF) of the mixture fraction is crucial to the prediction of combustion since mixing plays an important role in turbulent non-premixed and partially premixed flames. This work provides an assessment of the large-eddy simulation (LES)/filtered density function (FDF) method for the prediction of the PDF of the mixture fraction. The advantage of the LES/FDF method is that it provides the full predictions of the statistical distribution of scalars including the mixture fraction. The predictive accuracy of the method for the PDF is yet to be fully validated. Assessing the prediction of the PDF of the mixture fraction, a conserved scalar, is an important starting point. The Sydney/Sandia inhomogeneous inlet jet flame is used as a test case. A quick comparison shows that the LES/FDF predicted PDF shapes of the mixture fraction deviate significantly from the commonly presumed Beta-PDF as well as from the experimental data in the flame. Here, to examine the source of the discrepancy, we clarify the different PDF definitions used in the comparison among the predictions, measurements, and the presumed shape PDFs. The discrepancy observed from the comparison is largely reconciled by clarifying the difference between the PDFs that are examined. The PDF of the resolved mixture fraction is shown to be close to the Beta-PDF in both the measurements and predictions, while the PDF directly deduced from the LES/FDF particles deviates significantly from the Beta-PDF. A multimodal PDF analysis and a pseudo convergence analysis are conducted to provide plausible evidence to support the predicted multimodal PDF shapes. The sub-filter scale FDF is shown to be close to the Beta-PDF too through the construction of a synthesized PDF, which supports the common presumed Beta-PDF assumption used in the presumed PDF methods when combined with LES.

42 ENGINEERING↗

DOE OSTI2020

Durability of Disposable N95 Mask Material When Exposed to Improvised Ozone Gas Disinfection

The principle finding of this report is that both commercial and a novel material used for N95 mask filters can endure many cycles of disinfection by ozone gas (20 ppm for 30 minutes) without detectable degradation or loss of filtration efficiency. N95 masks and surgical masks (hereafter referred to as masks) typically use a filtration material fabricated from meltblown polypropylene. To achieve maximum filtration efficiency while maintaining a reasonable pressure drop, these nonwoven fabrics are also electrostatically charged (corona discharge is the most common method used), to maximize attraction and capture of aerosols and solid particulates. Under normal circumstances, the reuse of masks is generally discouraged, but in times of crisis has become a necessity, making disinfection after each use a necessity. To be acceptable, any disinfection procedure must cause minimal degradation to the performance of the filter material. Possible performance degradation mechanisms include mechanical damage, loss of electrostatic charge, or both. One of the most practical and direct ways to measure combined mechanical and electrostatic integrity, and the subsequent ability to reuse mask filter material, is by the direct measurement of filtration efficiency. In this paper, we report that small numbers of disinfection cycles at reasonable virucidal doses of ozone do not significantly degrade the filtration efficiency of meltblown polypropylene filter material. By comparison, laundering quickly results in a significant loss of filtration efficiency and requires subsequent recharging to restore the electrostatic charge and filtration efficiency. A common assumption among biomedical scientists that ozone is far too destructive for this application. However, these direct measurements show that mask materials, specifically the filtration material, can withstand dozens of ozone disinfection cycles without any measurable degradation of filtration efficiency, nor any visible discoloration or loss of fiber integrity. The data are clear: when subjected to a virucidal dose of ozone for a much longer duration than is required for viral inactivation, there was no degradation of N95 filtration efficiency. The specific dosages of ozone needed for ~99% viral inactivation are thought to be at least 10 ppm for up to 30 minutes based upon an extensive literature review, but to standardize our testing, we consider a dose of 20 ppm for 30 minutes to be a reasonable and conservatively high ozone disinfection cycle. Finally, the material tested in this study withstood dosages of up to 200 ppm for 90 minutes, or alternatively 20 ppm for up to 36 hours, without detectable degradation, and further testing suggests that up to 30 or more disinfection cycles (at 20 ppm for 30 minutes) would result in less than a 5% loss of filtration efficiency. This report does not address the effect of ozone cycling on other mask components, such as elastics.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2020

Combining Three-Dimensional Modeling with Artificial Intelligence to Increase Specificity and Precision in Peptide–MHC Binding Predictions

The reliable prediction of the affinity of candidate peptides for the MHC is important for predicting their potential antigenicity and thus influences medical applications, such as decisions on their inclusion in T cell–based vaccines. In this study, we present a rapid, predictive computational approach that combines a popular, sequence-based artificial neural network method, NetMHCpan 4.0, with three-dimensional structural modeling. We find that the ensembles of bound peptide conformations generated by the programs MODELLER and Rosetta FlexPepDock are less variable in geometry for strong binders than for low-affinity peptides. In tests on 1271 peptide sequences for which the experimental dissociation constants of binding to the well-characterized murine MHC allele H-2D b are known, by applying thresholds for geometric fluctuations the structure-based approach in a standalone manner drastically improves the statistical specificity, reducing the number of false positives. Furthermore, filtering candidates generated with NetMHCpan 4.0 with the structure-based predictor led to an increase in the positive predictive value (PPV) of the peptides correctly predicted to bind very strongly (i.e., Kd < 100 nM) from 40 to 52% (p = 0.027). The combined method also significantly improved the PPV when tested on five human alleles, including some with limited data for training. Overall, an average increase of 10% in the PPV was found over the standalone sequence-based method. The combined method should be useful in the rapid design of effective T cell–based vaccines.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2024

Quantitative radiography for determining density fluctuations in HED experiments

We have developed a method to extract density fluctuation measurements from x-ray radiographs of high-energy density (HED) instability growth and turbulence experiments. We use this information to calculate density fluctuation statistics for constraining the performance of turbulent mix models in HED systems. The density calculation combines image filtering, removal of systemic effects such as backlighter variation, calculation of transmission across multiple materials, and use of tracer materials to generate an approximate single-material density field. From the density map, we calculate both average density and a variance-like moment b (density-specific-volume covariance), which we compare to our models. We infer both quantities from a single image, which is significantly more information than the historic single scalar mix width measurements. We also develop a method of analyzing simulation outputs that incorporate both the density fluctuation metric from a turbulence model and the bulk material maps from the hydrodynamic code. This analysis helps address the question of how to initialize the simulations for best comparison to data from systems with large separations of scale in the mixing perturbation initial condition. We find that our data analysis method yields 1D average density and b curves with similar morphology and amplitudes as those from preliminary simulation comparisons.

47 OTHER INSTRUMENTATION↗

DOE OSTI2020

A digital twin based on OpenFAST linearizations for real-time load and fatigue estimation of land-based turbines

Monitoring a wind turbine requires intensive instrumentation, which would be too cost-prohibitive to deploy to an entire wind plant. This work presents a technique that uses readily available measurements to estimate signals that would otherwise require additional instrumentation. This study presents a digital twin concept with a focus on estimating wind speed, thrust, torque, tower-top position, and loads in the tower using supervisory control and data acquisition (SCADA) measurements. The model combines a linear state-space model obtained using OpenFAST linearizations, a wind speed estimator, and a Kalman filter algorithm that integrates measurements with the state model to perform state estimations. The measurements are: top acceleration, generator torque, pitch, and rotational speed. The article extends previous work that derived the linear state-space model using a different method. The new implementation, based on OpenFAST linearization capability, allows for a systematic extension of the method to more states, inputs, outputs, and to the offshore environment. Results from the two methods are compared, and the validation is made with additional measurements using the GE 1.5-MW turbine located at the National Renewable Energy Laboratory test site. Real-time damage equivalent loads of the tower bottom moment are estimated with an average accuracy of approximately 10%. Overall, the results from this proof of concept are encouraging, and further application of the model will be considered.

17 WIND ENERGY↗

DOE OSTI2021

Learning the structure of wind: A data-driven nonlocal turbulence model for the atmospheric boundary layer

In this work, we develop a novel data-driven approach to modeling the atmospheric boundary layer. This approach leads to a nonlocal, anisotropic synthetic turbulence model which we refer to as the deep rapid distortion (DRD) model. Our approach relies on an operator regression problem that characterizes the best fitting candidate in a general family of nonlocal covariance kernels parameterized in part by a neural network. This family of covariance kernels is expressed in Fourier space and is obtained from approximate solutions to the Navier–Stokes equations at very high Reynolds numbers. Each member of the family incorporates important physical properties such as mass conservation and a realistic energy cascade. The DRD model can be calibrated with noisy data from field experiments. After calibration, the model can be used to generate synthetic turbulent velocity fields. To this end, we provide a new numerical method based on domain decomposition which delivers scalable, memory-efficient turbulence generation with the DRD model as well as others. We demonstrate the robustness of our approach with both filtered and noisy data coming from the 1968 Air Force Cambridge Research Laboratory Kansas experiments. Using these data, we witness exceptional accuracy with the DRD model, especially when compared to the International Electrotechnical Commission standard.

17 WIND ENERGY↗

DOE OSTI2025

Dark matter substructure or source model systematics? A case study of cluster lens Abell S1063

Mapping the small-scale structure of the universe through gravitational lensing is a promising tool for probing the particle nature of dark matter. Curved Arc Basis (CAB) has been proposed as a local lensing formalism in galaxy clusters, with the potential to detect low-mass dark matter substructure. In this work, we analyse the cluster lens Abell S1063 in search of dark matter substructure with the CAB formalism, using multiband imaging data from James Webb Space Telescope ( JWST ). We use two different source modelling methods: shapelets and pixel-based source reconstruction based on Delaunay triangulation. We find that source modelling systematics from shapelets result in a disagreement between CAB parameters measured from different filters. Source modelling with Delaunay significantly alleviates this systematic, as seen in the improvement in agreement across filters. We also find that inadequate complexity in source modelling can result in convincing spurious detections of dark matter substructure from strong gravitational lenses, as seen by our $\Delta \text{BIC} > 20$ measurement of a $M \sim 10^{10}$ ${\rm M}_{\odot }$ subhalo with shapelets, a spurious detection that is not reproduced with Delaunay source modelling. We demonstrate that multiband analysis with different JWST filters is key for disentangling source and lens model systematics from dark matter substructure detections.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2021

A Knowledge Network-Based Approach to Facilitate Annotation of Clinical Pathway Component Clusters

Mining electronic health records (EHRs) to identify contextually related clinical concept clusters that tend to co-occur temporarily and consistently could improve data-driven clinical pathway (CP) construction. However, the automatic extraction of contextually related clinical concept clusters contains a vast amount of irrelevant information. Hence, this paper proposes a knowledge network-enabled literature-based discovery (LBD) approach to remove noise from clusters. The authors used published literature to filter spurious concepts from the clusters and used data from the US Department of Veterans Affairs’s major depressive disorder (MDD) cohort of Operation Enduring Freedom/Operation Iraqi Freedom (OEF/OIF) for their experimentation. The approach was applied to 2,967 clusters extracted from the MDD OEF/OIF database. The experimental results demonstrate that the proposed approach can filter 94% of the irrelevant information. Moreover, the authors applied various network mining algorithms to analyze the clusters and demonstrated that LBD, along with network mining techniques, is a useful method for finding accurate contextually related clinical concept clusters. This could help domain researchers perform advanced analytics in CPs.

Hasan, S M Shamimul↗

DOE OSTI2021

Data-driven Event Identification in the U.S. Power Systems Based on 2D-OLPP and RUSBoosting Trees

Accurate event identification is an essential part of situation awareness ability for power system operators. Therefore, this work proposes an integrated event identification algorithm for power systems. First, to obtain and filter suitable inputs for event identification, an event detection trigger based on the rate of change of frequency (RoCoF) is presented. Then, the wave arrival time difference-based triangulation method considering the anisotropy of wave propagation speed is utilized to estimate the location of the detected event. Next, the two-dimensional orthogonal locality preserving projection (2D-OLPP)-based method, which is suitable for multiple types of measured data, is employed to achieve higher effectiveness in extracting the event features compared with traditional one-dimensional projection and principle component analysis (PCA). Finally, the random undersampling boosted (RUSBoosted) trees-based classifier, which can mitigate the data sample imbalance issue, is utilized to identify the type of the detected event. Furthermore, the proposed approach is demonstrated using the actual measurement data of U.S. power systems from FNET/GridEye. Comparison results show that the proposed event identification algorithm can achieve better performance than existing approaches.

24 POWER TRANSMISSION AND DISTRIBUTION↗

NASA NTRS1975

Finite difference identification of noisy distributed systems using scanning measurements

Most of the present-day literature concerned with identification theory and techniques is directed toward lumped parameter systems, and many comprehensive surveys of the field are available. Relatively little has appeared in the literature concerning distributed identification, and even more noticeable is the scarcity of papers dealing with systems described by the one-dimensional wave equation. Perdeauville and Goodson were perhaps the first researchers with a workable but time consuming method for the identification of coefficients of the wave equation. Fairman and Shen, also considering the wave equation, used the technique of finite differencing to approximate spatial derivatives, and Poisson filter chains to approximate temporal derivatives.

Hughes, R. O.↗

NASA NTRS1978

Navier-Stokes calculations with a coupled strongly implicit method. Part 2: Spline solutions

A coupled strongly implicit method is combined with a deferred-corrector spline solver for the vorticity-stream function form of the Navier-Stokes equation. Solutions for cavity, channel and cylinder flows are obtained with the fourth-order spline 4 procedure. The strongly coupled spline corrector method converges as rapidly as the finite difference calculations and also allows for arbitrary large time increments for the Reynolds numbers considered. In some cases fourth-order smoothing or filtering is required in order to suppress high frequency oscillations.

Rubin, S. G.↗

NASA NTRS1979

The applicability of Brillouin scattering to flow field diagnostics

To fill the void between turbulence theory and experiment; particularly in the flow fields consisting of monatomic gases, for example in wind tunnels, means of measuring fluctuating quantities are needed. In the area of density fluctuation measurement, the optical method of Brillouin scattering was suggested. This was based on the theory, that the Brillouin scattered intensity is proportional to a function of density. In this investigation the potential of this method as a diagnostic tool was studied. Here the density fluctuations in gases were sought. Continuous wave lasers and interferometers were used as the primary illuminating source and scattered light filters respectively.

Laiosa, J.↗

NASA NTRS1981

Shuttle /STS-1/ entry trajectory reconstruction

The methods and data used to reconstruct the Shuttle entry trajectory aerodynamics from 180 km to landing are reviewed. Onboard accelerometer and gyro measurements are used with a weighted least squares filter along with ground tracking data to provide the evolving spacecraft state. The software development is described, noting that computations include linear acceleration and angular rate data, aerodynamic coefficient, and inertial measurement units, sampled at 170 Hz. Ground tracking data was gathered on S- and C-bands; Guam data is considered critical as it was taken during the blackout at the beginning of entry. The generation of a best estimate trajectory, combining flight and ground data, yields inplane parameters of altitude, flight path angle, and velocity for comparison with navigational instrumentation. Predicted lift/drag ratios were found to be accurate from Mach 1-25, and up to 23% low below Mach 1.

Compton, H. R.↗

NASA NTRS1983

Method for treating wastewater using microorganisms and vascular aquatic plants

A method for treating wastewater compresses subjecting the wastewater to an anaerobic setting step for at least 6 hours and passing the liquid effluent from the anaerobic settling step through a filter cell in an upflow manner. There the effluent is subjected first to the action of anaerobic and facultative microorganisms, and then to the action of aerobic microorganisms and the roots of at least one vascular aquatic plant.

Wolverton, B. C.↗

NASA NTRS1991

Mesospheric KHI signatures in reconstructed broadband rocket probe data

In an accepted method of measuring D region electron density with a rocket-borne dc-mode Langmuir probe, the resulting fine-structure signal is modified by a high-pass filter. While this form of data has been successfully used for power spectral analysis, it fails to reveal important spatial domain features without further processing. It is demonstrated that the broadband signal can be recovered by use of a digital filter that corrects for the on-board high-pass filter effects. The D-region broadband structure so recovered for a daytime equatorial flight shows variations in electron density consistent with a model of Kelvin-Helmholtz billows, and not consistent with inertial range turbulence. The isolated regions of irregularity are about 100 m thick near an altitude of 75 km, imbedded in a region with a staircase-structure electron density profile with about 200-m steps. Suggestive similarities to a numerical model of KHI are to undersea observations of KHI-caused microstructure are shown.

Parker, Jay W.↗

NASA NTRS1992

Binary optical filters for scale invariant pattern recognition

Binary synthetic discriminant function (BSDF) optical filters which are invariant to scale changes in the target object of more than 50 percent are demonstrated in simulation and experiment. Efficient databases of scale invariant BSDF filters can be designed which discriminate between two very similar objects at any view scaled over a factor of 2 or more. The BSDF technique has considerable advantages over other methods for achieving scale invariant object recognition, as it also allows determination of the object's scale. In addition to scale, the technique can be used to design recognition systems invariant to other geometric distortions.

Reid, Max B.↗