Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “extended structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Environment of Metal–O–Fe Bonds Enabling High Activity in CO 2 Reduction on Single Metal Atoms and on Supported Nanoparticles

Single-atom catalysts are often reported to have catalytic properties that surpass those of nanoparticles, while a direct comparison of sites common and different for both is lacking. In this work, we show that single atoms of the Pt-group embedded into the surface of Fe 3 O 4 have a greatly enhanced interaction strength with CO 2 compared with Fe 3 O 4 surface. The strong CO 2 adsorption on single Rh atoms and corresponding low activation energies lead to two-orders-of-magnitude higher conversion rates of CO 2 compared to Rh nanoparticles. This high activity of single atoms stems from the partially oxidic state imposed by their coordination to the support. Fe 3 O 4 -supported Rh nanoparticles follow the behavior of single atoms for CO 2 interaction and reduction, which is attributed to the dominating role of partially oxidic sites at the Fe 3 O 4 -Rh interface. Thus, we show a likely common catalytic chemistry for two kinds of materials thought to be different, and we show that single atoms of Pt-group metals on Fe 3 O 4 are an especially successful material for catalyzed reactions that depend primarily upon sites with the metal-O-Fe environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Mixed-Flux Techniques for Rational Synthesis and Structural Control in Silver Chalcogenides

The functionality of materials is intrinsically linked to their structures, an axiom encapsulated in the principle of structure-property relationships. The pinnacle of materials design is the tailoring of its structure for a specific function, which requires the ability of rational synthesis and the development of synthesis science. This idea, however, remains elusive for the synthesis of complex extended solids. A major obstacle is the difficulty in using established chemical principles selectively to control reaction paths and favor certain structural patterns over numerous other possible results. In this context, we are developing a synthesis science approach that facilitates the control of the structure and bonding to create new structures. This is achieved by employing a two-component flux consisting of mixed hydroxides and halides as the reaction medium. This enables reaction conditions that allow better control of the structure dimensionality and composition by manipulating the temperature and solvent basicity (via the flux component ratio). Here, we demonstrate the efficacy of this method in controlling their structural motifs to arrive at 23 unreported compositions and 6 unique structure types. These materials are expected to exhibit a broad range of properties, from metallic to semiconducting, with calculations suggesting the potential for emergent phenomena such as Dirac semimetals. The reaction paths afforded by these mixed fluxes establish a direct correlation between the synthetic variables and properties, providing significant insight into a broadly applicable approach for new materials.

Zhou, Xiuquan [Argonne National Laboratory (ANL), ↗
DOE OSTI2022

Structural basis of colibactin activation by the ClbP peptidase

Abstract Colibactin, a DNA cross-linking agent produced by gut bacteria, is implicated in colorectal cancer. Its biosynthesis uses a prodrug resistance mechanism: a non-toxic precursor assembled in the cytoplasm is activated after export to the periplasm. This activation is mediated by ClbP, an inner-membrane peptidase with an N-terminal periplasmic catalytic domain and a C-terminal three-helix transmembrane domain. Although the transmembrane domain is required for colibactin activation, its role in catalysis is unclear. Our structure of full-length ClbP bound to a product analog reveals an interdomain interface important for substrate binding and enzyme stability and interactions that explain the selectivity of ClbP for the N -acyl- d -asparagine prodrug motif. Based on structural and biochemical evidence, we propose that ClbP dimerizes to form an extended substrate-binding site that can accommodate a pseudodimeric precolibactin with its two terminal prodrug motifs in the two ClbP active sites, thus enabling the coordinated activation of both electrophilic warheads.

Biochemistry & Molecular Biology↗
DOE OSTI2020

1D topological phases in transition-metal monochalcogenide nanowires

The Su–Schrieffer–Heeger (SSH) model is a prototypical one-dimensional (1D) diatomic lattice model for non-trivial topological phases and topological excitations. In theory, many variations and extensions of the SSH model have been proposed and explored to better understand the novel aspects of topological physics in low dimensions on the nanoscale. However, the outstanding challenge remains to find real nanomaterials with robust structural stability for realizing the 1D topological states. Here, we develop an extended version of the SSH model with multi-atomic bases of four, six and eight atoms and an imposed screw rotation symmetry. Furthermore, based on first-principles calculations, we demonstrate the realization of this model in transition metal monochalcogenide M 6 X 6 (M = Mo and W; X = S, Se and Te) nanowires. The topological features of the doped M 6 X 6 nanowires are confirmed with non-trivial edge modes and e/2 fractional charges, representative of the 1D non-trivial Zak phase. Our finding not only sheds new light on our fundamental understanding of 1D topological physics, but also significantly extends the scope of 1D topological materials that will attract immediate experimental interest, since isolated M 6 X 6 nanowires have already been synthesized in experiments.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Unlocking the unfolded structure of ubiquitin: Combining time-resolved x-ray solution scattering and molecular dynamics to generate unfolded ensembles

The unfolding dynamics of ubiquitin were studied using a combination of x-ray solution scattering (XSS) and molecular dynamics (MD) simulations. The kinetic analysis of the XSS ubiquitin signals showed that the protein unfolds through a two-state process, independent of the presence of destabilizing salts. In order to characterize the ensemble of unfolded states in atomic detail, the experimental XSS results were used as a constraint in the MD simulations through the incorporation of x-ray scattering derived potential to drive the folded ubiquitin structure toward sampling unfolded states consistent with the XSS signals. We detail how biased MD simulations provide insight into unfolded states that are otherwise difficult to resolve and underscore how experimental XSS data can be combined with MD to efficiently sample structures away from the native state. Our results indicate that ubiquitin samples unfolded in states with a high degree of loss in secondary structure yet without a collapse to a molten globule or fully solvated extended chain. Finally, we propose how using biased-MD can significantly decrease the computational time and resources required to sample experimentally relevant nonequilibrium states.

Chemistry↗
DOE OSTI2025

Femtosecond temperature measurements of laser-shocked copper deduced from the intensity of the x-ray thermal diffuse scattering

We present 50-fs, single-shot measurements of the x-ray thermal diffuse scattering (TDS) from copper foils that have been shocked via nanosecond laser ablation up to pressures above ∼135 GPa. We hence deduce the x-ray Debye–Waller factor, providing a temperature measurement. The targets were laser-shocked with the DiPOLE 100-X laser at the High Energy Density endstation of the European X-ray Free-Electron Laser. Single x-ray pulses, with a photon energy of 18 keV, were scattered from the samples and recorded on Varex detectors. Despite the targets being highly textured (as evinced by large variations in the elastic scattering) and with such texture changing upon compression, the absolute intensity of the azimuthally averaged inelastic TDS between the Bragg peaks is largely insensitive to these changes, and allowing for both Compton scattering and the low-level scattering from a sacrificial ablator layer provides a reliable measurement of $T/Θ^2_D$, where Θ D is the Debye temperature. We compare our results with the predictions of the SESAME 3336 and LEOS 290 equations of state for copper and find good agreement within experimental errors. We, thus, demonstrate that single-shot temperature measurements of dynamically compressed materials can be made via thermal diffuse scattering of XFEL radiation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Particle-hole asymmetric phases in doped twisted bilayer graphene

Twisted bilayer graphene (TBG) has emerged as a paradigmatic platform for exploring the interplay between strong interactions in a multi-band system with nearly flat bands, while offering unprecedented control over the filling fraction of electron/hole carriers. Despite much theoretical work, developing a comprehensive ab initio model for this system has proven challenging due to the inherent trade-off between accurately describing the band structure and incorporating the interactions within the Hamiltonian. Here, we constructed an extended multi-orbital Hubbard model, and performed Hartree-Fock (HF) calculations to explore its phase diagram across commensurate fillings. We found several nearly-degenerate insulating states at charge neutrality, all of which exhibit orbital orders. We also observed that most of the Hartree–Fock ground states exhibit a generalized valley Hund’s-like rule, resulting in valley polarization. Importantly, we show that the incorporation of the intra-valley and inter-valley exchange interactions is crucial to properly stabilize the ordered symmetry-broken states. In agreement with experiments, we find significant particle-hole asymmetry, which underscores the importance of using particle-hole asymmetric models.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Extending synchrotron SAXS instrument ranges through addition of a portable, inexpensive USAXS module with vertical rotation axes

Ultra-SAXS can enhance the capabilities of existing synchrotron SAXS/WAXS beamlines. A compact ultra-SAXS module has been developed, which extends the measurable q -range with 0.0015 ≤ q (nm −1 ) ≤ 0.2, allowing structural dimensions in the range 30 ≤ D (nm) ≤ 4000 to be probed in addition to the range covered by a high-end SAXS/WAXS instrument. By shifting the module components in and out on their respective motor stages, SAXS/WAXS measurements can be easily and rapidly interleaved with USAXS measurements. The use of vertical crystal rotation axes (horizontal diffraction) greatly simplifies the construction, at minimal cost to efficiency. In this paper, the design considerations, realization and synchrotron findings are presented. Measurements of silica spheres, an alumina membrane, and a porous carbon catalyst are provided as application examples.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Models for Resilience Design Patterns

Resilience plays an important role in supercomputers by providing correct and efficient operation in case of faults, errors, and failures. Resilience design patterns offer blueprints for effectively applying resilience technologies. Prior work focused on developing initial efficiency and performance models for resilience design patterns. This paper extends it by (1) describing performance, reliability, and availability models for all structural resilience design patterns, (2) providing more detailed models that include flowcharts and state diagrams, and (3) introducing the Resilience Design Pattern Modeling (RDPM) tool that calculates and plots the performance, reliability, and availability metrics of individual patterns and pattern combinations.

Kumar, Mohit↗
DOE OSTI2020

Application of FEFF analyses to actinide 5f systems

In this paper, the strengths and limitations of FEFF simulations, as applied to actinide systems, are discussed. While the impact of total angular momentum coupling in the 5f manifold is not addressed within the usual FEFF approach, the utility of FEFF is demonstrated.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Design of a multichannel photonic crystal dielectric laser accelerator

To be useful for most scientific and medical applications, compact particle accelerators will require much higher average current than enabled by current architectures. For this purpose, we propose a photonic crystal architecture for a dielectric laser accelerator, referred to as a multi-input multi-output silicon accelerator (MIMOSA), that enables simultaneous acceleration of multiple electron beams, increasing the total electron throughput by at least 1 order of magnitude. To achieve this, we show that the photonic crystal must support a mode at the Γ point in reciprocal space, with a normalized frequency equal to the normalized speed of the phase-matched electron. We show that the figure of merit of the MIMOSA can be inferred from the eigenmodes of the corresponding infinitely periodic structure, which provides a powerful approach to design such devices. Additionally, we extend the MIMOSA architecture to electron deflectors and other electron manipulation functionalities. These additional functionalities, combined with the increased electron throughput of these devices, permit all-optical on-chip manipulation of electron beams in a fully integrated architecture compatible with current fabrication technologies, which opens the way to unconventional electron beam shaping, imaging, and radiation generation.

43 PARTICLE ACCELERATORS↗
NASA NTRS1972

The heavy particle hazard, what physical data are needed?

The physical data required to evaluate the radiation hazard from heavy galactic cosmic rays to astronauts on extended missions are discussed. The spectral characteristics, nuclear interaction parameters, and track structure of particles are emphasized. The data on the lower energy portion of the differential spectrum of the iron group and nuclear fragmentation in tissue and aluminum are tested, and results are shown.

Curtis, S. B.↗
NASA NTRS1972

Turbulent properties of a continuum plasma in shear flow.

The detailed turbulence structure of a weakly ionized, continuum plasma is analyzed. This analysis, when extended to high Reynolds number turbulent boundary layers, shows that the ratio of the electron to ion saturation currents decreases by an order of magnitude as compared to the laminar case.

Marcisz, T. J.↗
NASA NTRS1975

Compression of contour data through exploiting curve-to-curve dependence

An approach to exploiting curve-to-curve dependencies in order to achieve high data compression is presented. One of the approaches to date of along curve compression through use of cubic spline approximation is taken and extended by investigating the additional compressibility achievable through curve-to-curve structure exploitation. One of the models under investigation is reported on.

Yalabik, N.↗