Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “error correction.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

An occultation satellite system for determining pressure levels in the atmosphere

A two-satellite microwave occultation system is described that will fix, as an absolute function of altitude, the pressure-temperature profile generated by a passive infrared sounder. The 300 mb pressure level is determined to within 24 m rms, assuming the temperture errors produced by the infrared sensor are not greater than 2 K rms. Error caused by water vapor in the radio path is corrected by climatological adjustments. A ground test of the proposed system is described. A microwave signal propagating between two mountain tops was found to be subject to periods of intense fading. Computer analysis of the raypath between the transmitting and receiving stations indicates that multipath and defocusing were responsible for this fading. It is unlikely that an operational pressure-reference-level system will be subject to the deep fades observed in the ground test, because the phenomena are associated with lower altitudes than the closest approach altitude of an occultation-system raypath.

Morrison, A. R.↗

Periodic variations stratospheric temperature from 20-65 km at 80 deg N to 30 deg S

Results for a seasonally varying diurnal tide in temperature at Churchill are presented, and possible significant aliasing of longer period waves by this tide is discussed. A diurnal tide whose amplitude and phase are coherent throughout the year is found to have little effect on periodic amplitudes other than the long-term mean, because most rocketsonde observations are taken near the same local time each day. Errors in periodic components arising from lack of solar radiation corrections are found to be largest for the long-term mean with a small influence noted in the annual wave's amplitude. Spatial variations of the amplitudes and phases of long-period waves are examined through the use of height-latitude sections, 20-65 km, at 80 deg N to 30 deg S. The quasi-biennial oscillation and semiannual waves have tropical maxima of 2 and 3C near 30 and 40 km respectively. The annual wave's maximum is over 22C near 45 km at 70 deg N and the terannual wave's maximum is over 6C near 55 km at 80 deg N. The semiannual wave has to polar maxima: 7C near 75 deg N at 32 km and 3C above 60 km north of 35 deg N.

Nastrom, G. D.↗

Comment on 'Kp dependence on sectors, by I. B. McDiarmid and E. E. Budzinski

A suggestion by McDiarmid and Budzinski that an annual variation of geomagnetic activity can explain a sector polarity asymmetry is shown not to be necessary. The correct explanation is that the Kp-index exhibits systematic errors that enhance the UT variation during Toward polarity and decrease the UT variation during Away polarity.

Svalgaard, L.↗

CCD architecture for spacecraft SAR image processing

A real-time synthetic aperture radar (SAR) image processing architecture amenable to future on-board spacecraft applications is currently under development. Using state-of-the-art charge-coupled device (CCD) technology, low cost and power are inherent features. Other characteristics include the ability to reprogram correlation reference functions, correct for range migration, and compensate for antenna beam pointing errors on the spacecraft in real time. The first spaceborne demonstration is scheduled to be flown as an experiment on a 1982 Shuttle imaging radar mission (SIR-B). This paper describes the architecture and implementation characteristics of this initial spaceborne CCD SAR image processor.

Arens, W. E.↗

Nitric oxide mixing ratios near the stratopause measured by a rocket-borne chemiluminescent detector

The nitric oxide mixing ratio between 43 km and 61 km was directly measured with a rocket-borne chemiluminescent detector. The ozone-generated background signal was monitored throughout the flight (in 1976) by periodically interrupting the atmospheric sample flow with a pure-N2 bias-supply gas. An error analysis of the 1976 results showed the need to correct results obtained from an earlier flight (in 1975). The corrected 1975 results are reported and compared with the 1976 results.

Horvath, J. J.↗

An approach to eliminate roundoff errors in digital filters

'Second-order quantizers' are introduced which can be used for implementing recursive digital filters with practically no roundoff errors or limit-cycle oscillations. Based on the idea of changing the transfer function used to compute roundoff errors, these quantizers save the low-order bits to correct the product at future iterations. For several pole locations, this can be done with a minimal amount of extra hardware.

Abu-El-haija, A. I.↗

An algorithm for using a laser anemometer to determine mean streamline patterns in a turbulent flow

The technique of tracing out a mean flow streamline with a three dimensional laser Doppler anemometer (LDA) is discussed with respect to cumulative, systematic errors that are inherent when the motion of the LDA test point is in the direction of the local measured velocity. Using simple potential flows that have variable curvature and inflection points to simulate an LDA experiment, a streamline tracing algorithm is developed that minimizes these errors. Also, the test point path remains close to the correct streamline even when simulated statistical measurement variations are included.

Orloff, K. L.↗

The GEMPAK Barnes interactive objective map analysis scheme

The analysis scheme and meteorological applications of the GEMPAK data analysis and display software system developed by NASA are described. The program was devised to permit objective, versatile, and practical analysis of satellite meteorological data using a minicomputer and a display system with graphics capability. A data area can be selected within the data file for the globe, and data-sparse regions can be avoided. Distances between observations and the nearest observation points are calculated in order to avoid errors when determining synoptic weather conditions. The Barnes (1973) successive correction method is employed to restore the amplitude of small yet resolvable wavelengths suppressed in an initial filtering pass. The rms deviation is then calculated in relation to available measured data. Examples are provided of treatment of VISSR data from the GOES satellite and a study of the impact of incorrect cloud height data on synoptic weather field analysis.

Koch, S. E.↗

Analysis of Subpixel Registration Accuracy

Geometric and probabilistic models for subpixel accuracy are developed. The geometric models bound the error in offset estimation using the pixels in an observed digital straight line. One probabilistic model bounds the estimate of error offset for continuous images. The other model bounds the error for discrete images given that one is in the correct pixel.

Lavine, D.↗

Parametric study of statistical bias in laser Doppler velocimetry

Analytical studies have often assumed that LDV velocity bias depends on turbulence intensity in conjunction with one or more characteristic time scales, such as the time between validated signals, the time between data samples, and the integral turbulence time-scale. These parameters are presently varied independently, in an effort to quantify the biasing effect. Neither of the post facto correction methods employed is entirely accurate. The mean velocity bias error is found to be nearly independent of data validation rate.

Gould, Richard D.↗

Some aspects of robotics calibration, design and control

The main objective is to introduce techniques in the areas of testing and calibration, design, and control of robotic systems. A statistical technique is described that analyzes a robot's performance and provides quantitative three-dimensional evaluation of its repeatability, accuracy, and linearity. Based on this analysis, a corrective action should be taken to compensate for any existing errors and enhance the robot's overall accuracy and performance. A comparison between robotics simulation software packages that were commercially available (SILMA, IGRIP) and that of Kennedy Space Center (ROBSIM) is also included. These computer codes simulate the kinematics and dynamics patterns of various robot arm geometries to help the design engineer in sizing and building the robot manipulator and control system. A brief discussion on an adaptive control algorithm is provided.

Tawfik, Hazem↗

Direct imaging of nonsolar planets with infrared telescopes using apodized coronagraphs

This research examines the use of modified Lyot coronagraphs with monolithic and segmented infrared telescopic systems for imaging nonsolar planets. These systems are investigated with the aim of reducing the effects of stellar diffracted energy on the planet image in the final image plane. A square telescope objective is best for this purpose. The associated coronagraph is composed of a cross-shaped apodizer in the first focal plane and either a square Lyot stop or circular corner Lyot stops in the corners of the pupil plane. The consequences of segmenting the aperture and the effects of various segment spacings and random piston and tilt errors of the individual segments are examined. A system to correct for the misalignments is proposed.

Mills, James P.↗

Types and Characteristics of Data for Geomagnetic Field Modeling

Given here is material submitted at a symposium convened on Friday, August 23, 1991, at the General Assembly of the International Union of Geodesy and Geophysics (IUGG) held in Vienna, Austria. Models of the geomagnetic field are only as good as the data upon which they are based, and depend upon correct understanding of data characteristics such as accuracy, correlations, systematic errors, and general statistical properties. This symposium was intended to expose and illuminate these data characteristics.

R A Langel↗

Gamma-ray burst locations from the Burst and Transient Source Experiment

The Burst and Transient Source Experiment (BATSE) consists of eight anisotropic gamma-ray spectrometers at the corners of the Compton Gamma Ray Observatory. BATSE monitors the full sky from a fixed orientation and determines the direction of gamma-ray bursts with an accuracy appropriate for studying the bursts' celestial distribution. We describe the calculation of gamma-ray burst directions from measurements made by BATSE. We present a sample of calculated directions from BATSE's measurement of solar flaxes and compare the calculated directions with the solar direction. We describe the systematic errors apparent in these data and discuss ongoing efforts to correct them.

Brock, M. N.↗

Maximum likelihood techniques applied to quasi-elastic light scattering

There is a necessity of having an automatic procedure for reliable estimation of the quality of the measurement of particle size from QELS (Quasi-Elastic Light Scattering). Getting the measurement itself, before any error estimates can be made, is a problem because it is obtained by a very indirect measurement of a signal derived from the motion of particles in the system and requires the solution of an inverse problem. The eigenvalue structure of the transform that generates the signal is such that an arbitrarily small amount of noise can obliterate parts of any practical inversion spectrum. This project uses the Maximum Likelihood Estimation (MLE) as a framework to generate a theory and a functioning set of software to oversee the measurement process and extract the particle size information, while at the same time providing error estimates for those measurements. The theory involved verifying a correct form of the covariance matrix for the noise on the measurement and then estimating particle size parameters using a modified histogram approach.

Edwards, Robert V.↗

The two-way time synchronization system via a satellite voice channel

A newly developed two-way time synchronization system is described in this paper. The system uses one voice channel at a SCPC satellite digital communication earth station, whose bandwidth is only 45 kHz, thus saving satellite resources greatly. The system is composed of one master station and one or several, up to sixty-two, secondary stations. The master and secondary stations are equipped with the same equipment, including a set of timing equipment, a synthetic data terminal for time synchronizing, and a interface unit between the data terminal and the satellite earth station. The synthetic data terminal for time synchronization also has an IRIG-B code generator and a translator. The data terminal of master station is the key part of whole system. The system synchronization process is full automatic, which is controlled by the master station. Employing an autoscanning technique and conversational mode, the system accomplishes the following tasks: linking up liaison with each secondary station in turn, establishing a coarse time synchronization, calibrating date (years, months, days) and time of day (hours, minutes, seconds), precisely measuring the time difference between local station and the opposite station, exchanging measurement data, statistically processing the data, rejecting error terms, printing the data, calculating the clock difference and correcting the phase, thus realizing real-time synchronization from one point to multiple points. We also designed an adaptive phase circuit to eliminate the phase ambiguity of the PSK demodulator. The experiments have shown that the time synchronization accuracy is better than 2 mu S. The system has been put into regular operation.

Heng-Qiu, Zheng↗