Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron localization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

The dynamics of the ionosphere of Mars at large solar zenith angles

A model of the ion chemistry and dynamics of the ionosphere of Mars at large solar zenith angles has been constructed using techniques previously developed for Venus. It is found that a substantial nighttime ionosphere should occur even when the ionopause height is as low as 250 km. At low altitudes the interaction of the plasma flow with the neutral atmosphere appears to result in considerable 'noise' in the flow patterns. Transterminator plasma velocities are smaller than for Venus, although they may exceed the local sonic speed. The effect of a nocturnal source of suprathermal electrons is also discussed.

Mccormick, P. T.↗

Ionization in nearby interstellar gas

Due to dielectric recombination, neutral magnesium represents an important tracer for the warm low-density gas around the solar system. New Mg I 2852 absorption-line data from IUE are presented, including detections in a few stars within 40 pc of the sun. The absence of detectable Mg I in Alpha CMa and other stars sets limits on the combined size and electron density of the interstellar cloud which gives rise to the local interstellar wind. For a cloud radius greater than 1 pc and density of 0.1/cu cm, the local cloud has a low fractional ionization, n(e)/n(tot) less than 0.05, if magnesium is undepleted, equilibrium conditions prevail, the cloud temperature is 11,750 K, and 80 percent of the magnesium in the sightline is Mg II.

Frisch, P. C.↗

Electronic structures of HgTe and CdTe surfaces and HgTe/CdTe interfaces

A Green's-function method has been used to study the surface and interface electronic structures of the II-VI compounds HgTe and CdTe. Localized surface and resonance states near the cation-terminated (100) surface of CdTe and the anion-terminated surface of HgTe have been found for the ideal surfaces. The energies and strengths of these surface states are altered by surface perturbations. The bulk states near the surface are drastically modified by the creation of the surface, but the band gaps remain unchanged. Numerical evaluation of the local densities of states at the Gamma and J points shows that, at the (100) interface of HgTe/CdTe, the previously observed surface states are no longer present. However, in the interface region, bulk states of one material penetrate some distance into the other material.

Schick, J. T.↗

A case study of the cusp electrodynamics by the Aureol-3 satellite - Evidence for FTE signatures?

Particle and field data from a pass of the Aureol-3 satellite through the polar cusp, several minutes after the southward turning of the IMF, are analyzed in detail. Superposed on the classical cusp, characterized by the typical ion and electron precipitations, several very narrow arcs are detected where large fluxes of electrons and ions, accelerated to 2-4 keV, precipitate simultaneously. These localized arcs correspond to the upward current sheets of a succession in latitude of narrow, alternatively upward and downward field-aligned current sheets. The data suggest that the satellite has crossed the ionospheric footprints of 2 adjacent flux transfer events separated by 100-150 km in latitude. Electric spikes and electromagnetic turbulence are typically associated with the region of downward currents.

Bosqued, Jean M.↗

Microwave Observations and Modeling of O2 (1-delta(sub g)) and O3 Diurnal Variation in the Mesosphere

The first microwave measurements of an electronically excited molecular species in the Earth's atmosphere are presented. Local thermodynamic equilibrium (LTE) rotational line emission from mesospheric O2(1-del(sub g)) was observed at a frequency of 255.01794 GHz (lambda is approx. 1.2 mm), employing the National Radio Astronomy Observatory (NRAO) millimeter facility at Kitt Peak, Arizona (32 N, 111 W). The pressure broadened line shapes of the O2(1-del(sub g)) spectra, which were obtained in January and April 1992 and in January and November 1993, are inverted to retrieve O2(1-del(sub g)) mixing profiles over the 50-70 km altitude region. The observed daytime abundances exceed ozone abundances in the lower mesosphere, which are separately retrieved with coincident O3 spectral line (249.7886 GHz) observations. The January and November 1993 observations are binned into 20-60 min time intervals to study O2(1-del(sub g)) diurnal behavior. Derived abundances of O2(1-del(sub g)) between 50 and 70 km for the four observation dates are 9%, 31%, 3%, and 26%, respectively, each +/- 10% higher than predicted, based on the simple photochemistry of lower mesospheric O2(1-del(sub g)). Modeled variation of [O2(1-del(sub g))] with time of day agrees with observed variation in that the observed difference between model and data abundances is constant throughout the daylight hours of each observation date. Model underprediction Of [02(lAg)] is consistent with similar model underprediction of mesospheric [O3]. A perturbation to the photochemical model that forces decreased ozone chemical loss brings brings both model [O3] and [O2(1-del(sub g))] into agreement with the observations. O2(1-del(sub g)) abundances derived from these 1.2 mm observations agree with [O2(1-del(sub g))] values derived from comparable SME observations of the 1.27 micrometers emission, with assumption of a 3880 sec O2(1-del(sub g)) radiative lifetime. The 6800 sec O2(1-del(sub g)) radiative lifetime proposed by Mlynczak and Nesbitt is ruled out by the similar comparison.

Sandor, Brad J.↗

Microwave Observations andf Modeling of O(sub 2) ((sup 1)delta-(sub g)) and O(sub 3) Diurnal Variation in the Mesosphere

The first microwave measurements of an electronically excited molecular species in the Earth's atmosphere are presented. Local thermodynamic equilibrium (LTE) rotational line emission from mesopheric O(sub 2) ((sup 1)delta-(sub g)) was observed at a frequency of 255.01794 GHz (Lambda approx. 1.2mm), employing the National Radio Astronomy Observatory (NRAO) millimeter facility at Kitt Peak, Arizona (32(deg)N, 111(deg)W).

photolysis ozone↗

Breakdown characteristics and conditioning of carbon and refractory metal electrodes

High voltage carbon and refractory metal electrodes employed in devices used in space, such as ion thrusters and traveling wave tubes, can be easily damaged by electrical breakdown and arcing events. Modification of the electrode surfaces due to these events can impact the voltage hold off capability of the surfaces, which could lead to additional arcing, further damage, and the potential for device failure. On the cathode-potential surface, the arc energy is deposited by all of the processes at the surface ultimately responsible for net electron emission, such as melting, vapor and particulate formation, sputtering, ion bombardment, etc. On the anode-potential surface, the energy is deposited from the plasma or electron stream that crosses the gap, which causes surface damage by local heating. In spite of this energy dependence on the damage, many systems that use arc discharges characterize the amount of material removed from the surfaces and the lifetime of the device for voltage hold-off by the amount of current that passes through the arc, or the 'Coulomb-rating'. The results of a series of tests that were preformed on the boltage hold off capability and damage to carbon-carbon composite surfaces and molybdenum surfaces due to induced arcing will be presented and discussed. Damage to the surfaces was characterized by the field emission performance after the arc initiation and SEM photographs for the different energy and coulomb-transfer arc conditions. Both conditioning and damage to the surfaces were observed, and will be related to the characteristics of the electrical breakdown.

high voltage breakdown↗

Using Visual Odometry to Estimate Position and Attitude

A computer program in the guidance system of a mobile robot generates estimates of the position and attitude of the robot, using features of the terrain on which the robot is moving, by processing digitized images acquired by a stereoscopic pair of electronic cameras mounted rigidly on the robot. Developed for use in localizing the Mars Exploration Rover (MER) vehicles on Martian terrain, the program can also be used for similar purposes on terrestrial robots moving in sufficiently visually textured environments: examples include low-flying robotic aircraft and wheeled robots moving on rocky terrain or inside buildings. In simplified terms, the program automatically detects visual features and tracks them across stereoscopic pairs of images acquired by the cameras. The 3D locations of the tracked features are then robustly processed into an estimate of overall vehicle motion. Testing has shown that by use of this software, the error in the estimate of the position of the robot can be limited to no more than 2 percent of the distance traveled, provided that the terrain is sufficiently rich in features. This software has proven extremely useful on the MER vehicles during driving on sandy and highly sloped terrains on Mars.

Maimone, Mark↗

The Sun Radio Imaging Space Experiment (SunRISE)

Radio emission from coronal mass ejections (CMEs) is a di- rect tracer of particle acceleration in the inner heliosphere and potential magnetic connections from the lower solar corona to the larger heliosphere. Energized electrons excite Langmuir waves, which convert into radio emission at the local plasma frequency, with the most intense acceleration thought to occur within 20 RS, but many aspects of this par- ticle acceleration and transport remain poorly constrained. Ground-based arrays would be quite capable of tracking the radio emission associated with CMEs, but absorption by the Earth’s ionosphere limits the frequency coverage of ground-based arrays (n > 15 MHz), which in turn limits the altitudes over which they can track the radio emission ( < 3RS). The state-of-the-art for tracking such emission from space is defined by single antennas (Wind/WAVES, Stereo/SWAVES), in which the tracking is accomplished by assuming a frequency-to-density mapping; there has been some success in triangulating the emission between the spacecraft, but considerable uncertainties remain. We describe the Sun Radio Imaging Space Experiment (Sun- RISE) mission concept: A constellation of small spacecraft in a geostationary graveyard orbit designed to localize and track radio emissions in the inner heliosphere. Each space- craft would carry a receiving system for observations be- low 25 MHz, and SunRISE would image CMEs more than a few solar radii from the Sun.

Zaslavsky, Arnaud↗

The MERiT Onboard the CeREs: A Novel Instrument to Study Energetic Particles in the Earth's Radiation Belts

The Miniaturized Electron pRoton Telescope, MERiT, is a low‐mass, low‐power, compact instrument using an innovative combination of particle detectors, sensor electronics, and onboard processing. MERiT is flying on the Compact Radiation belt Explorer, CeREs, a 3U CubeSat launched into a low earth orbit of 500‐km altitude and inclination of 85° on 16 December 2018. The primary and secondary science goals of CeREs are to investigate electron microbursts and to study solar particles. MERiT comprises a stack of solid state detectors (SSD) behind space facing avalanche photo diodes (APDs) surrounded by W‐Al shielding to reduce side‐penetrating particle background. The APD‐SSD combination enables measurement of electrons from 5 to 200 keV and 1 to 8 MeV; protons from 200–400 keV and 7–100 MeV in differential channels with energy resolution ΔE/E≈30% for both electrons and protons. MERiT measures microbursts with a high time resolution ranging from 4 to 16 ms and solar particles with a cadence of 1 s. MERiT energy channels and cadences are software configurable via algorithms and lookup tables residing on a field‐programmable gate array. The lookup tables can be changed via ground commands. MERiT geometry factor is 31 sq.cm‐sr and optimized to measure microbursts with the instrument viewing the local zenith in orbit. MERiT enables investigation of dynamical processes of radiation belt electron energization and loss, solar electron and proton transport, and their access to the Earth's polar caps. We describe the MERiT sensor design, calibration, operational modes, data products, and science goals.

Kanekal, S. G.↗

Possible Counterpart Signal of the Fermi Bubbles at the Cosmic-Ray Positrons

The inner Galaxy has hosted cosmic-ray burst events, including those responsible for the gamma-ray Fermi bubbles and the eROSITA bubbles in X-rays. In this work, we study the Alpha Magnetic Spectrometer positron fraction and find three features around 12, 21, and 48 GeV, of which the lowest energy has a 1.4–4.9σ significance, depending on astrophysical background assumptions. Using background simulations that explain the cosmic-ray positron fraction, positron flux, and electron plus positron flux by primary and secondary cosmic rays and cosmic rays from local pulsars, we test these spectral features as originating from electron/positron burst events from the inner Galaxy. We find the 12 GeV feature to be explained by an event of age τ ≃ 3–10 Myr, in agreement with the proposed age of the Fermi bubbles. Furthermore, the energy in cosmic-ray electrons and positrons propagating along the Galactic disk and not within the Fermi bubbles volume is estimated to be 10 51.5 –10 57.5 erg, or O(10 –4 ) – O(1) the cosmic-ray energy causing the Fermi bubbles. We advocate that these positron fraction features are the counterpart signals of the Fermi bubbles, or of substructures within them, or of the eROSITA bubbles.

79 ASTRONOMY AND ASTROPHYSICS↗

Quantum textures of the many-body wavefunctions in magic-angle graphene

Interactions among electrons create novel many-body quantum phases of matter with wavefunctions that often reflect electronic correlation effects, broken symmetries, and novel collective excitations. A wide range of quantum phases has been discovered in MATBG, including correlated insulating, unconventional superconducting, and magnetic topological phases. The lack of microscopic information, including precise knowledge of possible broken symmetries, has thus far hampered our understanding of MATBG's correlated phases. Here we use high-resolution scanning tunneling microscopy to directly probe the wavefunctions of the correlated phases in MATBG. The squares of the wavefunctions of gapped phases, including those of the correlated insulators, pseudogap, and superconducting phases, show distinct patterns of broken symmetry with a √3 x √3 super-periodicity on the graphene atomic lattice that has a complex spatial dependence on the moiré superlattice scale. We introduce a symmetry-based analysis to describe our measurements of the wavefunctions of MATBG's correlated phases with a set of complex-valued local order parameters. For the correlated insulators in MATBG, at fillings of ±2 electrons per moiré unit cell relative to charge neutrality, we compare the observed quantum textures to those expected for proposed theoretical ground states. In typical MATBG devices, the textures of correlated insulators' wavefunctions closely match those of the theoretically proposed IKS order, while in ultra-low-strain samples our data has local symmetries like those of a T-IVC phase. Here, we also study the wavefunction of MATBG's superconducting state, revealing strong signatures of intervalley coherence that can only be distinguished from those of the insulator with our phase-sensitive measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Doping-modulated strain control of bifunctional electrocatalysis for rechargeable zinc–air batteries

Changes in the local atomic arrangement in a crystal caused by lattice-mismatch-induced strain can efficiently regulate the performance of electrocatalysts for zinc–air batteries (ZABs) in many manners, mainly due to modulated electronic structure configurations that affect the adsorption energies for oxygen-intermediates formed during oxygen reduction and evolution reactions (ORR and OER). However, the application of strain engineering in electrocatalysis has been limited by the strain relaxation caused by structural instability such as dissolution and destruction, leading to insufficient durability towards the ORR/OER. In this work, we propose a doping strategy to modulate the phase transition and formation of self-supported cobalt fluoride–sulfide (CoFS) nanoporous films using a low amount of copper (Cu) as a dopant. This well-defined Cu–CoFS heterostructure overcomes the obstacle of structural instability. Our study of the proposed Cu–CoFS also helps establish the structure–property relationship of strained electrocatalysts by unraveling the role of local strain in regulating the electronic structure of the catalyst. As a proof-of-concept, the Cu–CoFS electrocatalyst with doping-modulated strain exhibited superior onset potentials of 0.91 V and 1.49 V for the ORR and OER, respectively, surpassing commercial Pt/C@RuO 2 and benchmarking non-platinum group metal (non-PGM) catalysts. ZABs with the Cu–CoFS catalyst delivered excellent charge/discharge cycling performance with an extremely low voltage gap of 0.5 V at a current density of 10 mA cm –2 and successively 0.93 V at a high current density of 100 mA cm –2 and afforded an outstanding peak power density of 255 mW cm –2 .

25 ENERGY STORAGE↗

Sub-melt nanosecond pulsed-laser induced densification and strain-field relaxation in single-crystal diamond

Dislocations and polishing-induced defect networks in synthetic diamond introduce local strain fields and broaden Raman features, limiting performance in optical, thermal, and electronic applications. Laser annealing is emerging as a promising approach to repair surface and near-surface defects in diamond without entering the melt regime, yet surface densification, defect-state modification, and associated structural changes have not been well quantified. In this work, we show that sub-melt nanosecond pulsed-laser annealing (PLA) induces near-surface densification and defect-mediated strain relaxation in single-crystal Chemical Vapor Deposition (CVD) diamond. Single- and two-pulse PLA were applied, and structural evolution was quantified using co-registered ISO 25,178 white-light interferometry, depth-resolved Raman spectroscopy, and cross-sectional STEM with geometric phase analysis (GPA). Across a 5 × 6 grid (n = 30), responsive regions exhibit large reductions in local slope (Sdq 45–65%), developed area (Sdr 60–90%), height spread (Sp, Sz 30–65%), void volume (Vv 57–60%), and roughness amplitude (Sa, Sq 48–57%), consistent with densification of ∼4–6.5 nm. Raman profiling shows narrowing of the diamond line and improved spectral uniformity to depths of ∼2–3 μm. Given that the Raman probing depth significantly exceeds the densified layer thickness, this response is interpreted as consistent with long-range strain-field redistribution originating from the near-surface region. STEM-GPA strain maps further support this interpretation, showing smoother strain fields, suppressed hotspots, and redistribution of localized strain concentrations following PLA. These results are consistent with defect-mediated strain relaxation and densification-driven modification of the near-surface energy state. The approach provides a scalable pathway for improving near-surface structural quality in diamond relevant to electronic, photonic, and quantum applications.

Areal surface metrology (ISO 25,178)↗

Direct Determination of 3C/4H Silicon Carbide Heterophase Interfaces by Electron Ptychography

Silicon carbide is a technologically relevant material that can exist in various structural polymorphs, each with its own electronic properties. Through the controlled growth of abrupt interfaces between the polymorphs, systems with emergent properties arise from differences in local bonding and stacking sequences. Determining the structure of these interfaces provides important insights into predicting and ultimately controlling their properties. Here, in this study, we use multislice electron ptychography (MEP) to qualitatively and quantitatively analyze interfaces between 3C and 4H silicon carbide in three dimensions. Two distinct interfaces are investigated: a coherent interface between $(1\bar{1}1)$ (3C) and $(0001)$ (4H) , and an incoherent interface between $(1\bar{1}2)$ (3C) and $(1\bar{1}00)$ (4H) . At the coherent interface, MEP enables direct quantification of a sharp boundary with an inclined step, whereas at the incoherent interface, local atomic displacements are determined along dislocation cores. By quantifying the spatial distribution and atomic-scale structure of these interfaces in three dimensions, this study provides insight into the complexity of silicon carbide heteropolytype interfaces, paving the way for theoretical modeling and the development of design rules to achieve desired properties.

heterophase interface↗

Localized-to-itinerant transition preceding antiferromagnetic quantum critical point and gapless superconductivity in CeRh 0.5 Ir 0.5 In 5

A fundamental problem posed from the study of correlated electron compounds, of which heavy-fermion systems are prototypes, is the need to understand the physics of states near a quantum critical point (QCP). At a QCP, magnetic order is suppressed continuously to zero temperature and unconventional superconductivity often appears. Here, we report pressure ( P )-dependent 115 In nuclear quadrupole resonance (NQR) measurements on heavy-fermion antiferromagnet CeRh 0.5 Ir 0.5 In 5 . These experiments reveal an antiferromagnetic (AF) QCP at \({P}_{{\rm{c}}}^{{\rm{AF}}}=1.2\) GPa where a dome of superconductivity reaches a maximum transition temperature T c . Preceding \({P}_{{\rm{c}}}^{{\rm{AF}}}\) , however, the NQR frequency ν Q undergoes an abrupt increase at \({P}_{{\rm{c}}}^{{\rm{* }}}\) = 0.8 GPa in the zero-temperature limit, indicating a change from localized to itinerant character of cerium’s f -electron and associated small-to-large change in the Fermi surface. At \({P}_{{\rm{c}}}^{{\rm{AF}}}\) where T c is optimized, there is an unusually large fraction of gapless excitations well below T c that implicates spin-singlet, odd-frequency pairing symmetry.

36 MATERIALS SCIENCE↗

Block–spiral magnetism: An exotic type of frustrated order

Significance Magnetic frustration in spin or electronic models emerges from the failure of the system to fulfill simultaneously conflicting local requirements. The latter typically arise from the lattice geometry or are induced by special spin–spin interactions in the system at various distances. Here we show that the competing energy scales of the seemingly nonfrustrated orbital-selective Mott phase of the low-dimensional multiorbital Hubbard model can originate a “block–chiral magnetism,” i.e., a state with rigidly rotating spin–magnetic islands. Furthermore, we show how such an exotic spin state influences the electronic properties of the system, revealing parity-breaking quasiparticles.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Origin of the Local 1/4-KeV X-Ray Flux in Both Charge Exhange and a Hot Bubble

The solar neighbourhood is the closest and most easily studied sample of the Galactic interstellar medium, an understanding of which is essential for models of star formation and galaxy evolution. Observations of an unexpectedly intense diffuse flux of easily absorbed 1/4-kiloelectronvolt X-rays coupled with the discovery that interstellar space within about a hundred parsecs of the Sun is almost completely devoid of cool absorbing gas, led to a picture of a 'local cavity' filled with X-ray-emitting hot gas, dubbed the local hot bubble. This model was recently challenged by suggestions that the emission could instead be readily produced within the Solar System by heavy solar-wind ions exchanging electrons with neutral H and He in interplanetary space, potentially removing the major piece of evidence for the local existence of million-degree gas within the Galactic disk. Here we report observations showing that the total solar wind charge-exchange contribution is approximately 40 percent of the 1/4-keV flux in the Galactic plane. The fact that the measured flux is not dominated by charge exchange supports the notion of a million-degree hot bubble extending about a hundred parsecs from the Sun.

Charge exhange and a hot bubble↗