Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrolyte”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Electric-Field-Induced Spatially Dynamic Heterogeneity of Solvent Motion and Cation Transference in Electrolytes

While electric fields primarily result in migration of charged species in electrolytic solutions, the solutions are dynamically heterogeneous. Solvent molecules within the solvation shells of the cation will be dragged by the field while free solvent molecules will not. Here we combine electrophoretic NMR measurements of ion and solvent velocities under applied electric fields with molecular dynamics simulations to interrogate different solvation motifs in a model liquid electrolyte. Measured values of the cation transference number $(t^0_+)$ agree quantitatively with simulation-based predictions over a range of electrolyte concentrations. Solvent-cation interactions strongly influence the concentration-dependent behavior of $t^0_+$. We identify a critical concentration at which most of the solvent molecules lie within solvation shells of the cations. The dynamic heterogeneity of solvent molecules is minimized at this concentration where $t^0_+$ is approximately equal to zero.

42 ENGINEERING↗

Wide-voltage-window reversible control of electronic transport in electrolyte-gated epitaxial BaSnO 3

The wide gap perovskite semiconductor BaSnO 3 has attracted much interest since the discovery of room temperature electron mobility up to 320 cm 2 V -1 s -1 in bulk crystals. Motivated by applications in oxide heterostructures, rapid progress has been made with BaSnO 3 films, although questions remain regarding transport mechanisms and mobility optimization. Here we report on a detailed study of epitaxial BaSnO 3 electric double layer transistors based on ion gel electrolytes, enabling wide-doping-range studies of transport in single films. The work spans an order of magnitude in initial n doping (similar to 10 19 to 10 20 cm -3 , with both oxygen vacancies and La), film thicknesses from 10-50 nm, and measurements of resistance, Hall effect, mobility, and magnetoresistance. In contrast with many oxides, electrolyte gating of BaSnO 3 is found to be essentially reversible over an exceptional gate voltage window (approaching +/- 4 V), even at 300 K, supported by negligible structural modification in operando synchrotron x-ray diffraction. We propose that this occurs due to a special situation in BaSnO3, where electrochemical gating via oxygen vacancies is severely limited by their low diffusivity. Wide-range reversible modulation of transport is thus achieved (in both electron accumulation and depletion modes), spanning strongly localized, weakly localized, and metallic regimes. Two-channel conduction analysis is then combined with self-consistent Schrodinger-Poisson and Thomas-Fermi modeling to extract accumulation layer electron densities and mobilities. Electrostatic electron densities approaching 10 14 cm -2 are shown to increase room temperature mobility by up to a factor of similar to 24. These results lay the groundwork for future studies of electron-density-dependent phenomena in high mobility BaSnO 3 , and significantly elucidate oxide electrolyte gating mechanisms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Aluminum Electrolytic Capacitor Vulnerability Evaluation in DC Power Supplies at the Spallation Neutron Source

The service life of electrolytic capacitors is a concern for long-term reliable operation of power supplies. The Power Conversion Group at the Spallation Neutron Source (SNS) facility of Oak Ridge National Laboratory is responsible for more than 500 power supplies with over 1000 electrolytic capacitors installed in these power supplies. Most of the electrolytic capacitors have been in operation since 2007 and are either well over or close to the manufacturer provided lifetime. This paper addresses this vulnerability to ensure continued reliable operation of the SNS. The power supply circuit is simulated in a MATLAB/Simulink environment to quantify the capacitor ripple current and operating voltage. Combined with manufacturer data, this information is used to estimate capacitor lifetime. Utilizing the simulation results and lifetime projections of the capacitors, capacitor replacements for the power supplies is prioritized. To assess end-of-life, the ambient temperature and ripple current of the capacitor is used. Based on the manufacturer's data and scientific literature review, capacitor end-of-life is established. The results of the simulations and analysis is presented. Data on the highest priority supplies will also be presented, and statistics on the capacitor performance, reliability and remaining lifetime will be shown.

Harave, Sudarshan↗

Orientation microscopy–assisted grain boundary analysis for protonic ceramic cell electrolytes

Abstract Grain boundaries in protonic ceramic cell (PCC) electrolytes hinder proton transport, reducing interfacial conductivity. In multicomponent PCC electrolytes, the inclusion of sintering aids further accentuates the complexity of grain boundaries. In this study, we synthesize nanocrystalline BaCe 0.4 Zr 0.4 Y 0.1 Yb 0.1 O 3− δ thin films via pulsed laser deposition and analyze their grain boundary character distributions using orientation data collected by precession electron diffraction technique. The results reveal an anisotropic distribution of grain boundary characters, with notably high populations of 180°‐tilt and twist grain boundaries. These findings provide critical insights into identifying the predominant grain boundaries in this PCC electrolyte material, assessing the vast five‐dimensional grain boundary space.

Patel, Sooraj [School of Aerospace and Mechanical ↗

Fluorinated solid electrolyte interphase enables highly reversible solid-state Li metal battery

Solid-state electrolytes (SSEs) are receiving great interest because their high mechanical strength and transference number could potentially suppress Li dendrites and their high electrochemical stability allows the use of high-voltage cathodes, which enhances the energy density and safety of batteries. However, the much lower critical current density and easier Li dendrite propagation in SSEs than in nonaqueous liquid electrolytes hindered their possible applications. Herein, we successfully suppressed Li dendrite growth in SSEs by in situ forming an LiF-rich solid electrolyte interphase (SEI) between the SSEs and the Li metal. The LiF-rich SEI successfully suppresses the penetration of Li dendrites into SSEs, while the low electronic conductivity and the intrinsic electrochemical stability of LiF block side reactions between the SSEs and Li. The LiF-rich SEI enhances the room temperature critical current density of Li 3 PS 4 to a record-high value of >2 mA cm -2 . Moreover, the Li plating/stripping Coulombic efficiency was escalated from 88% of pristine Li 3 PS 4 to more than 98% for LiF-coated Li 3 PS 4 . In situ formation of electronic insulating LiF-rich SEI provides an effective way to prevent Li dendrites in the SSEs, constituting a substantial leap toward the practical applications of next-generation high-energy solid-state Li metal batteries.

25 ENERGY STORAGE↗

Engineering Solid Electrolyte Interphase Composition by Assessing Decomposition Pathways of Fluorinated Organic Solvents in Lithium Metal Batteries

Studies have shown fluorinated electrolyte solvents can form desirable solid electrolyte interphase (SEI) in lithium metal batteries. In this study, we develop a detailed mechanistic understanding of two high performing electrolytes, Fluoroethylene Carbonate (FEC) and Difluoroethylene Carbonate (DFEC) to demonstrate minimal structural variations can lead to different decomposition products, and thereby the nature of the SEI. Using density functional theory (DFT) calculations, we find different initial bond-breaking mechanisms between FEC and DFEC. We develop free energy diagrams for the decomposition pathways including both electrochemical and chemical steps. Using the computational Li electrode, we identify the largest limiting potential of 1.77 V for FEC decomposition, associated with the formation of lithium fluoride, lithium oxide and FEC oligomers, and 1.53 V for DFEC, which correspond to the formation of polymerized vinylene carbonate and lithium fluoride. We suggest the formation of oligomers in the case of FEC instead of long polymers may lead to better SEI compactness. We also demonstrate the SEI components of FEC and DFEC are not stable on typical cathode voltage (3.87 V). This study presents a unified electrocatalytic perspective on SEI formation and decomposition.

25 ENERGY STORAGE↗

Recovery of Alkaline-Earths into Liquid Bi in Ternary LiCl-KCl-SrCl 2 /BaCl 2 Electrolytes at 500 °C

Electrochemical reduction of Sr 2+ and Ba 2+ into liquid Bi was investigated in dilute concentrations of SrCl 2 /BaCl 2 (0-5 mol%) in LiCl-KCl electrolytes at 500 °C to ascertain the limit of liquid Bi electrodes for alkaline-earth recovery. Analysis of the electrodes after constant current electrolysis to the specific charge of 270 C g -1 showed Sr 2+ ions consuming 29% of charge at 5 mol% before dropping to 8%-10% of the total charge at 0.45-0.72 mol% SrCl 2 . Ba 2+ ions consumed 54% at 5 mol% BaCl 2 before decreasing to 22%-24% at 0.42-0.89 mol% BaCl 2 ; substantial co-deposition of Li was observed in all chemistries, consuming up to 53% of charge. Considering only 1% of the total charge was consumed for depositing Ba 2+ and Sr 2+ ions in ~0.1 mol% SrCl 2 /BaCl 2 electrolyte, the lower recovery limit of Bi for alkaline-earth elements is suggested to be at ~0.4 mol% SrCl 2 /BaCl 2 to achieve appreciable deposition of alkaline-earths (>1.5 mol% Ba/Sr in liquid Bi). The overpotentials of liquid Bi at 5 mol% of SrCl 2 /BaCl 2 were evaluated by electrochemical impedance spectroscopy. The co-deposition of Sr and Li exhibited the largest increase in charge transfer resistances implying sluggish charge transfer kinetics whereas the co-deposition of Ba and Li exhibited a large increase in mass transport resistances due to the slow diffusion of Ba 2+ ions in the electrolyte.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Review—Polymer/Ceramic Interface Barriers: The Fundamental Challenge for Advancing Composite Solid Electrolytes for Li-Ion Batteries

Composite-solid electrolytes, in which ion-conducting polymers are combined with superionic ceramics, could revolutionize electrochemical-energy-storage devices enabling higher energy density, providing greater stability during operation and enhanced safety. However, the interfacial resistance between the ceramic and polymer phases strongly suppresses the ionic conductivity and presents the main obstacle to the use of these materials. Here, we emphasize the need for a distinct focus on reducing energy barriers to interfacial ion transport and improving the cation transference number. To achieve this goal, it is essential to develop a fundamental understanding of the parameters that influence the interfacial barriers to ion transport in composite electrolytes, and to understand the effect of the type of ceramic ("active" and "inert") and its content on ion-transport phenomena. We suggest that adapting the polymer chemistry, mainly directed on polymerized ionic liquids, (PolyILs), and combined with functionalization of the surface of ceramic nanoparticles is a promising route for overcoming the high-energy-barrier challenge. Owing to high content of ion-conducting ceramics and high t+ of PolyILs, the fractional contribution of the migrating cationic species to the total ionic conductivity of polymer-in-ceramic electrolytes via an interfacial percolation path, will be close to unity, thus eliminating complications that might arise from emerging concentration gradients during the operation of solid-state batteries.

25 ENERGY STORAGE↗

Solvation Structure and Electrochemical Properties of a New Weakly Coordinating Aluminate Salt as a Nonaqueous Electrolyte for Zinc Batteries

In continuation of our interest in developing multivalent electrolytes for energy storage, we report a new zinc salt with a weakly coordinating anion, tetrakis(perfluoro-tert-butoxy) aluminate (TPFA), as a stable electrolyte for nonaqueous systems. We examined the electrochemical and structural properties of this nonaqueous electrolyte in various solvents. ZnTPFA 2 supports highly reversible Zn deposition and stripping behavior in acetonitrile and ethereal solvents, with up to 91% Coulombic efficiency. A variety of analytical techniques were used to identify the local coordination structure around Zn 2+ in both the crystal phase and the solution phase, providing clear evidence of solvent coordination around the cation.

25 ENERGY STORAGE↗

Electrochemistry of the NaI-AlBr 3 Molten Salt System: A Redox-Active, Low-Temperature Molten Salt Electrolyte

NaI-AlBr 3 is a very appealing low melting temperature (<100 °C), salt system for use as an electrochemically-active electrolyte. This system was investigated for its electrochemical and physical properties with focus to energy storage considerations. A simple phase diagram was generated; at >100 °C, lower NaI concentrations had two partially miscible liquid phases, while higher NaI concentrations had solid particles. Considering the fully molten regime, electrical conductivities were evaluated over 5–25 mol% NaI and 110 °C–140 °C. Conductivities of 6.8–38.9 mS cm −1 were observed, increasing with temperature and NaI concentration. Effective diffusion coefficients of the I − /I 3 − redox species were found to decrease with both increasing NaI concentration and increasing applied potential. Regardless, oxidation current density at 3.6 V vs Na/Na + was observed to increase with increasing NaI concentration over 5–25 mol%. Finally, the critical interface between the molten salt electrolyte and electrode materials was found to significantly affect reaction kinetics. When carbon was used instead of tungsten, an adsorbed species, most likely I 2 , blocked surface sites and significantly decreased current densities at high potentials. This study shows the NaI-AlBr 3 system offers an attractive, low-temperature molten salt electrolyte that could be useful to many applied systems, though composition and electrode material must be considered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrolyte Takeover Strategy for Performance Recovery in Polysulfide-Permanganate Flow Batteries

The abundance of active material precursors for a polysulfide-permanganate flow battery makes it a compelling chemistry for large-scale, and potentially long-duration (>10 h), grid electricity storage. Precipitation, arising from either reactant crossover or electrolyte side reactions, decrease cell efficiencies during charge/discharge cycling. Regardless of the abundance and low cost of active materials, a system without high cyclability cannot meet grid electricity storage economic targets for applications that cycle regularly. Precipitated species can be removed, and reactor efficiency performance restored, by using an electrolyte takeover process, or ETP. Two ETP methods are investigated. One ETP uses the negative electrolyte, an alkaline polysulfide (pS) solution, as takeover solution, and another uses dilute acidic peroxide (DAP) as the takeover solution. Both ETPs maintain functional cell operation within an acceptable performance range over >1000 h and >200 cycles, a duration over which cells that do not undergo ETPs clog and fail. The DAP ETP proves especially effective and limits irrecoverable voltage efficiency fade below 0.02%/cycle. These ETPs, either individually, or in combination, can enable the requisite cyclability for practical polysulfide-permanganate flow battery systems.

25 ENERGY STORAGE↗

Design of a Single-Ion Conducting Polymer Electrolyte for Sodium-Ion Batteries

Here, a sodium bis(fluoroallyl)malonato borate salt (NaBFMB) is synthesized. Using a Click thiol-ene reaction, NaBFMB can be photo-crosslinked with a tri-thiol (trimethylolpropane tris(3-mercapto propionate), TMPT) to create a single-ion conducting electrolyte (NaSIE), with all negative charges residing on the borate moieties and anions immobilized through the 3-D crosslinked network. The NaSIE can be prepared either as a free-standing film or through a drop-cast method followed by a photo crosslinking method for an in-situ formation on top of the electrodes. The free-standing film of NaSIE has a high ionic conductivity of 2 × 10 –3 S cm –1 at 30 °C, and a high transference number (t Na + ) of 0.91 as measured through the Bruce-Vincent method. The electrochemical stability of NaSIE polymer electrolyte is demonstrated via cyclic voltammetry (CV) to be stable up to 5 V vs Na/Na + . When tested inside a symmetrical Na//Na cell, the NaSIE shows a critical current density (CCD) of 0.4 mA cm –2 . The stability of NaSIE is further demonstrated via a long cycling of the stripping/plating test with a current density of 0.1 mA cm –2 at five-minute intervals for over 10,000 min. Using the in-situ method, NaSIE is used as the electrolyte for a sodium metal battery using P2 (Na resides at prismatic sites with with ABBAAB stacking)-cathode of Na 0.67 Ni 0.33 Mn 0.67 O 2 (NNMO) and is cycled between the cut-off voltages of 2.0–4.0 V. A high initial specific capacity (85.7 mAh g –1 ) with a capacity retention of 86.79% after 150 cycles is obtained.

25 ENERGY STORAGE↗

Perspective—Hydrogen Bonded Concentrated Electrolytes for Redox Flow Batteries: Limitations and Prospects

This perspective provides a brief overview of the recent work on electrolytes with hydrogen (H)-bonding network, specifically the deep eutectic solvents (DESs), and outlines important factors to consider when adapting these electrolytes in redox flow batteries (RFBs). The redox behavior, solubility, and stability of several redox molecules of relevance to RFBs in DESs are presented, including some of our work within the Breakthrough Electrolytes for Energy Storage (BEES)—an Energy Frontier Research Center of the United States Department of Energy. Particularly, the challenges and opportunities for further development of DESs for energy storage are discussed.

25 ENERGY STORAGE↗

Editors’ Choice—Review—Designing Defects and Diffusion through Substitutions in Metal Halide Solid Electrolytes

Ternary metal halides A 3 MX 6 , ( A = Li + , Na + ; M = trivalent metal; X = halide) are a promising family of solid electrolytes for potential applications in all-solid-state batteries. Recent research efforts have demonstrated that chemical substitution at all three sites is an effective strategy to controlling battery-relevant material properties. The A 3 MX 6 family exhibits a wide breadth of structure and anion sublattice types, making it worthwhile to comprehend how chemical substitutions manifest desirable functional properties including ion transport, electrochemical stability, and environmental tolerance. Yet, a cohesive understanding of the materials design principles for these substitutions have not yet been developed. Here, we bring together prior literature focused on chemical substitutions in the A 3 MX 6 ternary metal halide solid electrolytes. Using materials chemistry perspectives and principles, we aim to provide insights into the relationships between crystal structure, choice of substituting ions and the extent of substitutions, ionic conductivity, and electrochemical stability. We further present targeted approaches to future substitution studies to enable transformative advances in A 3 MX 6 solid electrolytes and all-solid-state batteries.

25 ENERGY STORAGE↗

Effect of Solvent Motion on Ion Transport in Electrolytes

We use concentrated solution theory to derive an equation governing solvent velocity in a binary electrolyte when a current passes through it. This equation, in combination with the material balance equation, enables the prediction of electrolyte concentration profiles and species velocities as a function of space and time. This framework is used to predict ion velocities in Li-Li symmetric cells containing a mixture of lithium bis(trifluoromethanesulfonyl)imide and poly(ethylene oxide) (LiTFSI/PEO), for which the cation transference number relative to the solvent velocity, ${t}_{+}^{0},$ can be either positive or negative, depending on salt concentration. Accounting for the solvent motion is increasingly important at higher concentrations. Especially for negative ${t}_{+}^{0},$ if solvent velocity is set to zero, the cation velocity, based on the electrode-electrolyte interface reference frame, is pointed opposite to the current flow. However, when solvent motion is taken into account, the cation velocity, based on the same reference frame, is in the same direction as the current. This analysis demonstrates the importance of accounting for solvent velocity rigorously in seemingly simple systems such as symmetric cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective Plasticization of Poly (ethylene oxide) (PEO) Block in Nanostructured Polystyrene– PEO– Polystyrene Triblock Copolymer Electrolytes

The plasticization of a polymer electrolyte usually promotes its ionic conductivity but decreases its storage modulus due to the increased polymer chain flexibility. Herein, we show that such a tradeoff between the ionic conductivity and the mechanical robustness of the polymer electrolyte can be alleviated by selective plasticization of the ion-conductive block, such as poly(ethylene oxide) (PEO) in a polystyrene (PS)– PEO–PS block copolymer (SEO) electrolyte using an ether type plasticizer, tetraethylene glycol dimethyl ether (TEGDME). In this work, at maximum plasticizer loading, the room temperature ionic conductivity increases by up to 3 orders, whereas the storage modulus, G' reduces to half, is still on the order of 10 2 MPa. At above the melting temperature of the PEO block, the dynamic storage modulus, G' of the plasticized membrane surpasses its dry PS-PEO-PS counterpart. Such a phenomenon results from that, a) TEGDME co-crystallizes with PEO to promote its crystallinity and hence the storage modulus, b) TEGDME swells the amorphous PEO phase to enhance the polymer chain segmental mobility and hence ionic conductivity, and c) the PS phase remains intact from TEGDME to keep the SEO elastic.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic Structure Discovery Applied to the Ion Transport in the Ubiquitous Lithium-ion Battery Electrolyte LP30

The electrolytes of the today omnipresent lithium-ion batteries (LIBs) have for more than 25 years been based upon 1 M LiPF 6 in a 50:50 EC:DMC mixture—commonly known as LP30. The success of the basic design of the LP30 electrolyte, with many variations and additions made over the years, is unchallenged. Yet, some molecular level fundamentals of LP30 are surprisingly elusive: the structure of the first solvation shell of the Li + cation is still a topic of current debate; the details of the dynamics are not fully understood; the interpretation of structural and dynamic properties is highly dependent on the analysis methods used; the contributions by different species to the ion transport and the energetics involved are not established. We here apply dynamic structure discovery analysis as implemented in CHAMPION to molecular dynamics simulation trajectories to bring new light on the structure and dynamics within LP30 and especially the (Li + ) ion transport to rationalize further development of LIB electrolytes.

25 ENERGY STORAGE↗

Electrolyte Solvation and Ionic Association: Part IX. Structures and Raman Spectroscopic Characterization of LiFSI Solvates

The bis(fluorosulfonyl)imide anion N(SO 2 F) 2 ⁻ (i.e., FSI⁻) (also referred to as bis(fluorosulfonyl)amide (i.e., FSA-) and imidodi(sulphuryl fluoride)) has attracted tremendous interest in recent years for its utility in both lithium salts and ionic liquids for battery electrolyte applications. To facilitate the understanding of the characteristics of this anion, crystal structures are reported here for the uncoordinated anion in LiFSI-based solvates with cryptand CRYPT-222 and tetraglyme (G4). These crystalline solvates were analyzed by Raman spectroscopy to aid in assigning the Raman bands to the modes of ion coordination found in liquid electrolytes. These structures, as well as a thorough review of other relevant crystallographic data, provide insights into the rather remarkable properties of the FSI- anion with regard to solvate formation and electrolyte properties.

25 ENERGY STORAGE↗