Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dissolving”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Research and Technology Development Activities to Address the DOE-EM Environmental Mercury Challenge

Human activities have altered trace metal distributions globally. This is especially true for the trace metal mercury (Hg), a pervasive global pollutant that can be methylated to form highly toxic methylmercury (MeHg), which bioaccumulates in aquatic food webs, endangering humans and other biota. Currently there are more than 3,000 mercury-contaminated sites identified worldwide and the United Nations Environment Programme has recently highlighted the risk of this contamination to human health [1, 2]. The Oak Ridge Reservation (ORR) represents an example of one of these mercury-contaminated sites. Unlike other contaminants metals, radionuclides, and organic solvents that impact the Department of Energy Office of Environmental Management (DOE-EM) cleanup program at the ORR and other DOE sites, mercury has several unique characteristics that make environmental remediation of the Y-12 National Security Complex one of the most formidable challenges ever encountered. These distinctive physicochemical properties for mercury include the following: it is a liquid at ambient temperature and pressure; it is the only metal that biomagnifies; and it is the only contaminant transported as a cation, as a dissolved or gaseous elemental metal (similar to an organic solvent), or as both a cation and a dissolved or gaseous elemental metal under environmental conditions. Because of these complexities, implementing cost effective and sustainable solutions that reduce mercury flux from various primary and secondary contamination sources will require linking basic science understanding and applied research advancements into Oak Ridge Office of Environmental Management s (OREM) cleanup process. Currently, DOE is investing in mercury-related research through a variety of programs, including the Office of Science sponsored Critical Interfaces Science Focus Area, EM headquarters sponsored Applied Field Research Initiative, OREM-sponsored Lower East Fork Poplar Creek (LEFPC) Mercury Technology Development Program, Small Business Innovative Research (SBIR), and EM s Minority Serving Institutions Partnership Program. Collectively, these multi-institutional and multidisciplinary programs are generating new tools, knowledge, and remediation approaches that will enable efficient cleanup of mercury contaminated systems locally and globally. In this talk we will highlight the progress made to date in addressing key knowledge gaps required to solve this watershed-scale conundrum.

Pierce, Eric M↗

Ion conducting polymers and polymer blends for alkali metal ion batteries

Electrolyte compositions for batteries such as lithium ion and lithium air batteries are described. In some embodiments the compositions are liquid compositions comprising (a) a homogeneous solvent system, said solvent system comprising a perfluropolyether (PFPE) and polyethylene oxide (PEO); and (b) an alkali metal salt dissolved in said solvent system. In other embodiments the compositions are solid electrolyte compositions comprising: (a) a solid polymer, said polymer comprising a crosslinked product of a crosslinkable perfluropolyether (PFPE) and a crosslinkable polyethylene oxide (PEO); and (b) an alkali metal ion salt dissolved in said polymer. Batteries containing such compositions as electrolytes are also described.

25 ENERGY STORAGE↗

Electrospray ionizer for mass spectrometry of aerosol particles

A device and method are disclosed to apply ESI-based mass spectroscopy to submicrometer and nanometer scale aerosol particles. Unipolar ionization is utilized to charge the particles in order to collect them electrostatically on the tip of a tungsten rod. Subsequently, the species composing the collected particles are dissolved by making a liquid flow over the tungsten rod. This liquid with dissolved aerosol contents is formed into highly charged droplets, which release unfragmented ions for mass spectroscopy, such as time-of-flight mass spectroscopy. The device is configured to operate in a switching mode, wherein aerosol deposition occurs while solvent delivery is turned off and vice versa.

36 MATERIALS SCIENCE↗

System and process for dissolution of solids

A system and process are disclosed for dissolution of solids and "difficult-to-dissolve" solids. A solid sample may be ablated in an ablation device to generate nanoscale particles. Nanoparticles may then swept into a coupled plasma device operating at atmospheric pressure where the solid nanoparticles are atomized. The plasma exhaust may be delivered directly into an aqueous fluid to form a solution containing the atomized and dissolved solids. The composition of the resulting solution reflects the composition of the original solid sample.

36 MATERIALS SCIENCE↗

Method of accurate thickness measurement of boron carbide coating on copper foil

A method is disclosed of measuring the thickness of a thin coating on a substrate comprising dissolving the coating and substrate in a reagent and using the post-dissolution concentration of the coating in the reagent to calculate an effective thickness of the coating. The preferred method includes measuring non-conducting films on flexible and rough substrates, but other kinds of thin films can be measure by matching a reliable film-substrate dissolution technique. One preferred method includes determining the thickness of Boron Carbide films deposited on copper foil. The preferred method uses a standard technique known as inductively coupled plasma optical emission spectroscopy (ICPOES) to measure boron concentration in a liquid sample prepared by dissolving boron carbide films and the Copper substrates, preferably using a chemical etch known as ceric ammonium nitrate (CAN). Measured boron concentration values can then be calculated.

36 MATERIALS SCIENCE↗

Survey of Collection Media for Environmental Sampling

A study was undertaken to survey other potential sampling media that may be more effective in collecting nuclear materials and at the same time contain less uranium. Approximately 40 natural and synthetic fiber wipers were tested. A few were coated with complexants and/or solvents during the manufacturing process. Adhesives and tapes were also included. The relative merits of each sampling matrix were reviewed on the basis of: 1) efficiency in collecting uranium from surfaces, 2) the ease by which the wiper fabric is separated from the nuclear components, 3) latent uranium background of the wiper, 4) the impact that any dissolved swipe components might have on the chromatographic recovery of uranium, and finally, 5) the presence of any isobaric interferences that the dissolved swipe might contribute to the background during MS analysis. Results from this survey are compared to the standard cotton swipe and recommendations presented for the most promising candidates for further consideration.

Fontenot, Hunter↗

Nanocellular foam with solid flame retardant

Prepare nanofoam by (a) providing an aqueous solution of a flame retardant dissolved in an aqueous solvent, wherein the flame retardant is a solid at 23.degree. C. and 101 kiloPascals pressure when in neat form; (b) providing a fluid polymer composition selected from a solution of polymer dissolved in a water-miscible solvent or a latex of polymer particles in a continuous aqueous phase; (c) mixing the aqueous solution of flame retardant with the fluid polymer composition to form a mixture; (d) removing water and, if present, solvent from the mixture to produce a polymeric composition having less than 74 weight-percent flame retardant based on total polymeric composition weight; (e) compound the polymeric composition with a matrix polymer to form a matrix polymer composition; and (f) foam the matrix polymer composition into nanofoam having a porosity of at least 60 percent.

36 MATERIALS SCIENCE↗

Electrolyte for stable cycling of high-energy lithium sulfur redox flow batteries

A device comprising: a lithium sulfur redox flow battery comprising an electrolyte composition comprising: (i) a dissolved Li 2 S x electroactive salt, wherein x.gtoreq.4; (ii) a solvent selected from dimethyl sulfoxide, tetrahydrofuran, or a mixture thereof; and (iii) a supporting salt at a concentration of at least 2 M, as measured by moles of supporting salt divided by the volume of the solvent without considering the volume change of the electrolyte after dissolving the supporting salt.

25 ENERGY STORAGE↗

Symmetric redox flow battery containing organic redox active molecule

A redox flow battery comprising: a positive compartment containing a positive electrode in contact with a liquid electrolyte comprised of an organic redox active molecule dissolved in a solvent; a negative compartment containing a negative electrode in contact with a liquid electrolyte comprised of said organic redox active molecule dissolved in a solvent; electrical communication means for establishing electrical communication between said positive electrode, said negative electrode and an external load for directing electrical energy into or out of said symmetric redox flow battery; a separator component that separates the electrolyte solutions in the positive and negative compartments while permitting the passage of non-redox-active species between electrolyte solutions in positive and negative compartments; and means capable of establishing flow of the electrolyte solutions past said positive and negative electrodes, respectively. Methods of using the above-described redox flow battery for storing and releasing electrical energy are also described.

25 ENERGY STORAGE↗

A Triple Bubbler System to Measure Density, Surface Tension, and Depth of Electrorefiner Molten Salt

In pyroprocessing of used nuclear fuel (UNF), uranium from the fuel is electrochemically dissolved at the anode and transported through a molten salt electrolyte to the cathode—where it is later recovered for reuse. As part of this process, special nuclear materials (SNM) dissolve into the molten salt electrolyte. Monitoring the mass of these materials, particularly plutonium, is important for material accountability and safeguards of the electrorefiner (ER) used in pyroprocessing. The mass of plutonium in the ER vessel is a function of the volume and density of the salt as well as the plutonium concentration. Measuring these parameters presents challenges due to the high temperature, radiation, and accessibility of the ER within a hotcell. Here, the main motivation for this work was to develop a method capable of measuring the density and depth (volume) of salt under the extreme operating conditions within the ER to enhance the SNM accountability and safeguards of pyroprocessing. In addition, these online measurements would be useful for monitoring level changes associated with removal of electrolyte from the ER and different unit operations associated with electrochemical reprocessing of used nuclear fuel.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Initial Testing of Mediated Electrochemical Oxidation for Inclusion in the Plutonium-238 Production Program

Oak Ridge National Laboratory is currently restarting the United States’ capability to produce kilogram quantities of 238Pu annually for space power applications. This involves the purification of 238Pu from neutron-irradiated 237Np targets and conversion to heat-source plutonium oxide product for shipment to Los Alamos National Laboratory. Dissolution of the plutonium oxide product material is required to obtain an isotopic assay and impurity analysis of the product material. In addition, any off-specification product will need to be dissolved for re-purification. An electrochemical method that produces highly oxidizing ions in solution is currently being investigated as a rapid method for dissolving these plutonium oxide samples.

Myhre, Kristian↗

Method for the synthesis of iron hexacyanoferrate

A method is provided for synthesizing iron hexacyanoferrate (FeHCF). The method forms a first solution of a ferrocyanide source [A4Fe(CN)6.PH2O] material dissolved in a first solvent, where “A” is an alkali metal ion. A second solution is formed of a Fe(II) source dissolved in a second solvent. A reducing agent is added and, optionally, an alkali metal salt. The first and second solutions may be purged with an inert gas. The second solution is combined with the first solution to form a third solution in a low oxygen environment. The third solution is agitated in a low oxygen environment, and AX+1Fe2(CN)6.ZH2O is formed, where X is in the range of 0 to 1. The method isolates the AX+1Fe2(CN)6.ZH2O from the third solution, and dries the AX+1Fe2(CN)6.ZH2O under vacuum at a temperature greater than 60 degrees C.

25 ENERGY STORAGE↗

Alloys for shaped charge liners method for making alloys for shaped charge liners

One embodiment of the invention provides an alloy with a density greater than 10 g/cm3, the alloy comprising a single phase solution of tungsten, nickel, and iron. Also provided is a cone liner for use in shaped charges, the liner comprised of a tungsten, nickel, iron alloy having a single phase microstructure. Substantially no precipitates or second phases exist in the alloy. One embodiment of the invention further provides a method for producing a single phase alloy, the method comprising establishing a melt of iron and nickel; dissolving tungsten in the melt to form a solution; wherein the atomic percents of the nickel, tungsten and iron range from between approximately Ni-7%W-0%Fe, Ni-18%W-0%Fe, and Ni-8%W-24%Fe, wherein Ni is the remainder, maintaining the solution at a first temperature sufficient to create a homogeneous mixture; allowing the homogeneous mixture to solidify; and thermochemically treating the solidified mixture for a time to dissolve any second phases or microstructure within the mixture.

36 MATERIALS SCIENCE↗

Metal-organic framework electrodes for sodium ion batteries

A sodium ion battery comprises a cathode having a porous redox active metal-organic framework material. The battery can be an organic electrolyte sodium ion battery wherein the electrolyte comprises a sodium salt dissolved in an organic solvent or mixture of organic solvents. Alternatively, the battery can comprise an aqueous sodium ion battery wherein the electrolyte comprises a sodium salt dissolved in an aqueous solvent. Battery performance is especially related to electrolyte and binder selection.

25 ENERGY STORAGE↗

Method and composition for reducing nitrates, nitrites, and/or hydroxylamine in water using a homogeneous reduced copper tetra-substituted fluorinated pinacolate ligand catalyst complex

A method for reducing nitrates, nitrites, and/or hydroxylamine in water using a homogeneous reduced copper tetra-substituted fluorinated pinacolate ligand catalyst complex. The method includes dissolving a copper(II) tetra-substituted fluorinated pinacolate ligand pre-catalyst complex in water having an excess amount of nitrates, nitrites, and/or hydroxylamine therein. The dissolved copper(II) tetra-substituted fluorinated pinacolate ligand pre-catalyst complex in the water is subjected to electrochemical reduction to form a homogeneous reduced copper tetra-substituted fluorinated pinacolate ligand catalyst complex. The homogeneous reduced copper tetra-substituted fluorinated pinacolate ligand catalyst complex reduces the nitrates, nitrites, and/or hydroxylamine in the water to compounds with nitrogen in a lower oxidation state with the homogeneous reduced copper tetra-substituted fluorinated pinacolate ligand catalyst complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Method for condensing a CO2 vapor stream beyond the frost point

A method for cryogenic cooling without fouling is disclosed. The method comprises providing a first cryogenic liquid saturated with a dissolved gas; expanding the first cryogenic liquid into a separation vessel, separating into a vapor, a second cryogenic liquid, and a first solid; drawing the vapor into a heat exchanger and the second cryogenic liquid and the first solid out of the separation vessel; cooling the vapor against a coolant through the heat exchanger, causing the vapor to form a third cryogenic liquid and a second solid, the second solid dissolving in the third cryogenic liquid; and combining the second cryogenic liquid and the first solid with the third cryogenic liquid, producing a final cooled slurry. In this manner, the cryogenic cooling is accomplished without fouling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Method for lithograghic patterning of sensitive materials

Methods for patterning highly sensitive materials, such as organic materials, organic semiconductors, biomolecular materials, and the like, with photolithographic resolution are disclosed. In some embodiments, a germanium mask (304) is formed on the surface of the sensitive material (302), thereby protecting it from subsequent processes that employ harsh chemicals that would otherwise destroy the sensitive material (302). A microlithography mask (306) is patterned on the germanium mask layer (304), after which the germanium exposed by the microlithography mask (306) is removed by dissolving it in water. After transferring the pattern of the germanium mask (304) into the sensitive material (302), the germanium and microlithography masks (304, 306) are completely removed by immersing the substrate in water, which dissolves the remaining germanium and lifts off the microlithography mask material. As a result, the only chemical to which the sensitive material (302) is exposed during the patterning process is water, thereby mitigating or avoiding damage to the material (302).

36 MATERIALS SCIENCE↗

Aqueous Na-ion redox flow battery with ceramic NaSICON membrane

A redox flow battery is described herein that has a sodium-super-ionic-conductor NaSICON barrier disposed between an anolyte chamber of the battery and the catholyte chamber of the battery. The NaSICON barrier prevents crossover of solvents or active redox species between the anolyte chamber and the catholyte chamber, while permitting transport of sodium ions between the chambers. In exemplary embodiments, the anolyte chamber includes an anolyte solution that comprises a first active redox species dissolved in a first solvent, while the catholyte chamber includes a catholyte solution that comprises a second active redox species dissolved in a second solvent.

25 ENERGY STORAGE↗