Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “direct current”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Plasma simulation using the massively parallel processor

Two dimensional electrostatic simulation codes using the particle-in-cell model are developed on the Massively Parallel Processor (MPP). The conventional plasma simulation procedure that computes electric fields at particle positions by means of a gridded system is found inefficient on the MPP. The MPP simulation code is thus based on the gridless system in which particles are assigned to processing elements and electric fields are computed directly via Discrete Fourier Transform. Currently, the gridless model on the MPP in two dimensions is about nine times slower that the gridded system on the CRAY X-MP without considering I/O time. However, the gridless system on the MPP can be improved by incorporating a faster I/O between the staging memory and Array Unit and a more efficient procedure for taking floating point sums over processing elements. The initial results suggest that the parallel processors have the potential for performing large scale plasma simulations.

Lin, C. S.↗
NASA NTRS1987

Observations of annual and El Nino thermal and flow variations at 0 deg, 110 deg W and 0 deg, 95 deg W during 1980-1985

The paper describes the low-frequency (i.e., time scales longer than a month) upper ocean (above 250 m) current and temperature moored measurements conducted from March 1980 to September 1985 at 0, 110 deg W and from July 1981 to November 1983 (i.e., including the period of the 1982-1983 El Nino) at 0, 95 deg W. Estimates of the annual cycle were removed from the observations to determine the current and temperature fluctuations due to the 1982-1983 El Nino. The circulation of the upper ocean was found to be dramatically altered during the El Nino: the normally westward flowing surface current in autumn months reversed direction, and the equatorial undercurrent, normally considered to be a permanent feature, disappeared. Associated with the El Nino was a massive redistribution of heat throughout the mixed layer and the thermocline.

Halpern, David↗
NASA NTRS1989

Computational chaos in massively parallel neural networks

A fundamental issue which directly impacts the scalability of current theoretical neural network models to massively parallel embodiments, in both software as well as hardware, is the inherent and unavoidable concurrent asynchronicity of emerging fine-grained computational ensembles and the possible emergence of chaotic manifestations. Previous analyses attributed dynamical instability to the topology of the interconnection matrix, to parasitic components or to propagation delays. However, researchers have observed the existence of emergent computational chaos in a concurrently asynchronous framework, independent of the network topology. Researcher present a methodology enabling the effective asynchronous operation of large-scale neural networks. Necessary and sufficient conditions guaranteeing concurrent asynchronous convergence are established in terms of contracting operators. Lyapunov exponents are computed formally to characterize the underlying nonlinear dynamics. Simulation results are presented to illustrate network convergence to the correct results, even in the presence of large delays.

Barhen, Jacob↗
NASA NTRS1990

Solar and stellar coronae

A review of the observational facts of the X-ray corona of the sun suggests that the dissipation of waves plays at most a minor role in heating the corona. On the other hand, the random continuous shuffling and mixing of the footpoints of the bipolar magnetic fields, in which the X-ray corona resides, causes the spontaneous appearance of current sheets. Current sheets are highly dissipative, with a tendency to transient bursts of magnetic reconnection. Detailed observations show that the X-ray corona is made up of large numbers of small intense impulsive events of the same magnitude as expected from the bursts of reconnection. It appears, then, that it is the spontaneous current sheets that are the direct cause of the X-ray corona, driven by the continuous motions of the footpoints of the field in the photospheric convection.

Parker, E. N.↗
NASA NTRS1989

Computational Fluid Dynamics Program at NASA Ames Research Center

The Computational Fluid Dynamics (CFD) Program at NASA Ames Research Center is reviewed and discussed. The technical elements of the CFD Program are listed and briefly discussed. These elements include algorithm research, research and pilot code development, scientific visualization, advanced surface representation, volume grid generation, and numerical optimization. Next, the discipline of CFD is briefly discussed and related to other areas of research at NASA Ames including experimental fluid dynamics, computer science research, computational chemistry, and numerical aerodynamic simulation. These areas combine with CFD to form a larger area of research, which might collectively be called computational technology. The ultimate goal of computational technology research at NASA Ames is to increase the physical understanding of the world in which we live, solve problems of national importance, and increase the technical capabilities of the aerospace community. Next, the major programs at NASA Ames that either use CFD technology or perform research in CFD are listed and discussed. Briefly, this list includes turbulent/transition physics and modeling, high-speed real gas flows, interdisciplinary research, turbomachinery demonstration computations, complete aircraft aerodynamics, rotorcraft applications, powered lift flows, high alpha flows, multiple body aerodynamics, and incompressible flow applications. Some of the individual problems actively being worked in each of these areas is listed to help define the breadth or extent of CFD involvement in each of these major programs. State-of-the-art examples of various CFD applications are presented to highlight most of these areas. The main emphasis of this portion of the presentation is on examples which will not otherwise be treated at this conference by the individual presentations. Finally, a list of principal current limitations and expected future directions is given.

Holst, Terry L.↗
NASA NTRS1991

A simulated lightning effects test facility for testing live and inert missiles and components

Details of a simulated lightning effects test facility for testing live and inert missiles, motors, and explosive components are described. The test facility is designed to simulate the high current, continuing current, and high rate-of-rise current components of an idealized direct strike lightning waveform. The Lightning Test Facility was in operation since May, 1988, and consists of: 3 separate capacitor banks used to produce the lightning test components; a permanently fixed large steel safety cage for retaining the item under test (should it be ignited during testing); an earth covered bunker housing the control/equipment room; a charge/discharge building containing the charging/discharging switching; a remotely located blockhouse from which the test personnel control hazardous testing; and interconnecting cables.

Craven, Jeffery D.↗
NASA NTRS1990

Impact ionization in the base of a hot-electron AlSb/InAs bipolar transistor

The operation of a new AlSb/InAs heterojunction bipolar transistor is studied. The electrons are injected into a p-InAs base across the AlSb/InAs heterojunction. The conduction-band discontinuity at this heterojunction is sufficiently large so that energy of the electrons injected into InAs exceeds the threshold for generating electron-hole pairs by impact ionization. The observed incremental common base current at zero collector-base bias decreases and becomes negative as the emitter current is increased, thus providing direct evidence for impact ionization entirely by band-edge discontinuities.

Vengurlekar, Arvind S.↗
NASA NTRS1991

Flux compression measurements in sintered bulk Ba2YCu3O7

Trapping of magnetic fields and subsequent flux compression have been realized in sintered bulk Ba2YCu3O7 superconductors at 77 K. The field is trapped in two interconnected holes of 0.95-cm and 0.52-cm diameter, respectively. By inserting a superconducting plunger with a diameter of 0.93 cm into the larger hole, the trapped flux is compressed into the smaller hole, where the flux density is measured with a Hall probe. The ratio of the areas available for the magnetic flux before and after compression is 3.7. Deviations from this compression ratio are observed to increase as the trapped field is increased, demonstrating penetration of magnetic flux into the interior of the superconductor. Using a simple extension of the critical state model, the authors demonstrate how the flux compression technique can be used to test the validity of the model and also to calculate the critical current density of the superconductor directly from the measurements.

Israelsson, U. E.↗
NASA NTRS1991

Propagation of solar flare-associated interplanetary shock waves in the heliospheric meridional plane

An analysis is conducted for 149 flare-associated shock wave events based on interplanetary scintillation observational data. All of the flare-associated shock waves tend to propagate toward the low latitude region near the solar equator for flares that are located in both the solar Northern and Southern Hemispheres. Also, the fastest propagation directions tend toward the heliospheric current sheet near 1 AU. This tendency is caused by the dynamic action of near-sun magnetic forces on the ejected coronal plasma that traverses the helmet-like magnetic topologies near the sun outward to the classical topology that is essentially parallel to the heliospheric current sheet.

Wei, Fengsi↗
NASA NTRS1994

Chiron stellar occultation candidates: 1993-1996

A photographic search was conducted for stars that may be occulted by the unusual solar system object (2060) Chiron during the period from fall 1993 through summer 1996. 44 candidates were identified to a limiting V magnitude of 16, and for which the minimum appulse separation with Chiron is predicted to be less than 2.5 arcsec. The successful observation of a stellar occultation by Chiron would give a direct measure of its diameter (currently estimated to be between 60 and 300 km), and would help considerably in constraining Chiron's surface properties and volatile makeup. If at the time of the occultation, Chiron exhibits a significant coma, there is also the potential for measuring the optical-depth profile of the dust in its inner coma.

Bus, S. J.↗
NASA NTRS1995

Modeling the Earth's magnetospheric magnetic field confined within a realistic magnetopause

Empirical data-based models of the magnetosphereic magnetic field have been widely used during recent years. However, the existing models (Tsyganenko, 1987, 1989a) have three serious deficiencies: (1) an unstable de facto magnetopause, (2) a crude parametrization by the K(sub p) index, and (3) inaccuracies in the equatorial magnetotail B(sub z) values. This paper describes a new approach to the problem; the essential new features are (1) a realistic shape and size of the magnetopause, based on fits to a large number of observed crossing (allowing a parametrization by the solar wind pressure), (2) fully controlled shielding of the magnetic field produced by all magnetospheric current systems, (3) new flexible representations for the tail and ring currents, and (4) a new directional criterion for fitting the model field to spacecraft data, providing improved accuracy for field line mapping. Results are presented from initial efforts to create models assembled from these modules and calibrated against spacecraft data sets.

Tsyganenko, N. A.↗
NASA NTRS1996

Consequences of centrifugally-driven phase bunching in the near-earth magnetotail

The dynamics of the plasma sheet ions in the near-earth magnetotail where the Larmor radii are comparable to the magnetic field line curvature radius are examined. It is shown that enhanced centrifugal effects lead to the prominent bunching of the particles in the gyration phase. As a result of this bunching effect, it is demonstrated that a thin current sheet develops in the vicinity of the tail midplane. Using average values of the plasma density and temperature, the current sheet obtained has a characteristic thickness of the order of a few tenths of an earth radius, and leads to significant stretching of the local magnetic field lines. A further consequence of phase bunching is the build-up of a substantial current in the earth tail direction at low latitudes which leads to field line inclination in the dawn-dusk direction.

Delcourt, D. C.↗
NASA NTRS1997

Space Transportation Systems Using Tethers

The groundwork has been laid for tether space transportation systems. NASA has developed tether technology for space applications since the 1960's. Important recent milestones include retrieval of a tether in space (TSS-1, 1992), successful deployment of a 20-km-long tether in space (SEDS-1, 1993), and operation of an electrodynamic tether with tether current driven in both directions-power and thrust modes (PMG, 1993). Various types of tethers and systems can be used for space transportation. Short electrodynamic tethers can use solar power to 'push' against a planetary magnetic field to achieve propulsion without the expenditure of propellant. The planned Propulsive Small Expendable Deployer System (ProSEDS) experiment will demonstrate electrodynamic tether thrust during its flight in early 2OOO. Utilizing completely different physical principles, long non-conducting tethers can exchange momentum between two masses in orbit to place one body into a transfer orbit for lunar and planetary missions. Recently completed system studies of this concept indicate that it would be a relatively low-cost in-space asset with long-term multimission capability. Both methods of using tethers for space transportation and propulsion are described in the paper.

Johnson, Les↗
NASA NTRS1998

Overview of Future NASA Tether Applications

The groundwork has been laid for tether applications in space. NASA has developed tether technology for space applications since the 1960's. Important recent milestones include retrieval of a tether in space (TSS-1, 1992), successful deployment of a 20-km-long tether in space (SEDS-1, 1993), and operation of an electrodynamic tether with tether current driven in both directions-power and thrust modes (PMG, 1993). Various types of tethers and systems can be used for space transportation. Short electrodynamic tethers can use solar power to 'push' against a planetary magnetic field to achieve propulsion without the expenditure of propellant. The planned Propulsive Small Expendable Deployer System (ProSEDS) experiment will demonstrate electrodynamic tether thrust during its flight in early 2000. Utilizing completely different physical principles, long non-conducting tethers can exchange momentum between two masses in orbit to place one body into a higher orbit or a transfer orbit for lunar and planetary missions. Recently completed system studies of this concept indicate that it would be a relatively low-cost in-space asset with long-term multi-mission capability. Tethers can also be used to support space science by providing a mechanism for precision formation flying and for reaching regions of the upper atmosphere that were previously inaccessible.

Johnson, Les↗
NASA NTRS1998

Electroformed Nickel Mirrors for the Next Generation Space Telescope

This paper summarizes the work to date on a novel mirror fabrication technique being developed at the Marshall Space Flight Center for potential use on the Next Generation Space Telescope (NGST). This technique involves forming an extremely lightweight mirror by electroplating nickel and nickel based alloys onto a highly polished precision mandrel. The resulting mirror shell can then be backed up with or attached to a lightweight structure to produce a mirror element that is on the order of 15 kg/sq m areal density. Since the mirrors are fabricated from a mandrel (or master), subsequent mirrors can be made with very high economy; this technique is particularly suited to segmented mirrors schemes whereby large apertures are achieved through the deployment of smaller segments. Control of the electroplating process is the key element for producing high quality optics; bath chemistry and real time control of the plating current density yields uniform grained electroforms with zero residual stress. To accomplish this, a special electronic sensor was developed whereby the residual stress can be monitored as the nickel is electrolytically deposited. This information is used in a feedback loop to modulate current density which, in turn, directly governs the residual stress. Details pertaining to this and other aspects of the fabrication of a half meter mirror will be published along with test results and metrology data.

Redmon, John W.↗
NASA NTRS1999

Dissipative Processes in the Magnetopause Boundary Layer and Flux Transfer Events Using the Interball Spacecraft

Work on two quite distinct projects was accomplished: a study of flux transfer events and a study of the magnetosheath-polar cusp interface. The study with Oleg Vaisberg of the Space Research Institute in Moscow used only Interball data. We analyzed the magnetometer data and to assist the observations of Flux Transfer Events (FTEs) to aid in the interpretation of the data. One of the issues was to distinguish between simple traversals of the magnetopause and encounters with FTES. Once that distinction became clear then we could examine the changes in the plasma associated with the FTE. The second study was undertaken to study the turbulent interaction of the magnetosheath flow past the polar cusp. In this study Polar Data was used inside the magnetosphere as Interball crossed through the cusp into the magnetosheath. Our most interesting but least turbulent example was on May 29, 1996 when the interplanetary magnetic field (IMF) was northward. During these conditions the magnetosheath interface with the cusp becomes streamlined due to reconnection above the polar cusp. This reconnection provides a smooth surface across which the velocity shear occurs, thus minimizing turbulence in the interaction. The magnetopause current lies closer to the Earth than the flow boundary. This current layer reverses the field direction from nortward to southward in the neighborhood of the distant cusp and is somewhat noisty but not as much as this region becomes when the IMF is southward.

Russell, C. T.↗
NASA NTRS2001

Thermophysical Property Measurement and Materials Research in the NASA/MSFC Electrostatic Levitator

Containerless processing is an important tool for thermophysical property measurements and materials research. The freedom from a crucible allows processing of liquid materials in a metastable undercooled state, as well as allowing processing of high temperature and highly reactive melts. Electrostatic levitation (ESL) is a containerless method which provides a number of unique advantages, including the decoupling of positioning force from sample heating, the ability to operate in ultra-high vacuum or at moderate gas pressure (approximately 3 atm), and the ability to process non-conducting materials. ESL also has the potential to reduce internal flow velocities below those possible with electromagnetic, acoustic, or aero-acoustic techniques. The ESL facility at NASA's Marshall Space Flight Center (MSFC) is in use for thermophysical property measurements and materials research by a number of different internal and external investigators. The methods for obtaining access to the facility, as well as a summary of current capabilities and some future directions will be discussed.

Rogers, J. R.↗
NASA NTRS2001

Thermophysical Property Measurement and Materials Research in the NASA/MSFC Electrostatic Levitator

Containerless processing is an important tool for materials research. The freedom from a crucible allows processing of liquid materials in a metastable undercooled state, as well as allowing processing of high temperature and highly reactive melts. Electrostatic levitation (ESL) is a containerless method which provides a number of unique advantages, including the decoupling of positioning force from sample heating, the ability to operate in ultra-high vacuum or at moderate gas pressure (approx. 3 atm), and the ability to process non-conducting materials. ESL also has the potential to reduce internal flow velocities below those possible with electromagnetic, acoustic, or aero-acoustic techniques. In electrostatic levitation, the acceleration of gravity (or residual acceleration in reduced gravity) is opposed by the action of an applied electric field on a charged sample. Microgravity allows electrostatic levitation to work even more effectively. In microgravity, ESL can position larger samples than is possible on the ground, or it can position samples which maintain their charge poorly. Microgravity also reduces the effects of buoyant convection and sedimentation. The ESL facility at NASA's Marshall Space Flight Center (MSFC) is in use for thermophysical property measurements and materials research by a number of different internal and external investigators. The methods for obtaining access to the facility, as well as a summary of current capabilities and some future directions will be discussed.

Rogers, J. R.↗