Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Multiscale porosity characterization in additively manufactured polymer nanocomposites using micro-computed tomography

Extrusion-based additive manufacturing (AM) of polymer composites exhibits complex thermally driven phenomena that introduce severe discontinuities in the internal structure across length scales, especially voids or porosity. This study utilizes a high-throughput porosity characterization technique to analyze large datasets from numerous micro-computed tomography (mu CT) scans to capture the influence of AM print parameters on the size, shape, and location of porosity across multiple print layers (up to a few cm) on fused granular fabrication (FGF) printers. The materials investigated include nanocomposite formulations based on commercially relevant nylon-12 and polyether ketone ketone (PEKK) materials comprising nano- or micro- sized fillers. The estimated global porosity follows an inverse linear correlation against the bulk density of the printed samples. Increasing the extrusion multiplier (EM) and the nozzle temperature while decreasing the print speeds reduces the global porosity. Outlier analyses (local porosity morphology) show that faster print speeds and higher extrusion rates result in long, slender inter-layer voids, while lower nozzle temperatures lead to large, symmetrical, inter-bead voids (at the bead junction). Lack of active chamber temperature increases inter-layer and intra-bead voids with a two-fold increase in global porosity. Overall, the micro filler-reinforced composites exhibit higher global porosity than nanofiller-reinforced composites, which is attributed to the increased mismatch in the thermal expansion coefficient between the filler and the polymers used in the study.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Femtosecond X-ray Spectroscopy Directly Quantifies Transient Excited-State Mixed Valency

Quantifying charge delocalization associated with short-lived photoexcited states of molecular complexes in solution remains experimentally challenging, requiring local element specific femtosecond experimental probes of time-evolving electron transfer. In this study, we quantify the evolving valence hole charge distribution in the photoexcited charge transfer state of a prototypical mixed valence bimetallic iron–ruthenium complex, [(CN) 5 Fe II CNRu III (NH 3 ) 5 ]-, in water by combining femtosecond X-ray spectroscopy measurements with time-dependent density functional theory calculations of the excited-state dynamics. We estimate the valence hole charge that accumulated at the Fe atom to be 0.6 ± 0.2, resulting from excited-state metal-to-metal charge transfer, on an ~ 60 fs time scale. Our combined experimental and computational approach provides a spectroscopic ruler for quantifying excited-state valency in solvated complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Physical properties investigation of tetragonal Ba T 2 P 2 (T = Ru, Pd)

The structural, thermal, electrical transport, and magnetic properties of ternary compounds BaT 2 P 2 (T = Ru, Pd) are reported together with electronic structure calculations. Our results show that BaRu 2 P 2 crystallises in the layered tetragonal ThCr 2 Si 2 -type structure (space group I4/mmm) whereas BaPd 2 P 2 adopts the primitive tetragonal CeMg 2 Si 2 -type structure (space group P4/mmm). The combined experimental results and electronic structure calculations suggest metallic and diamagnetic ground states for both materials. Electrical transport measurements further indicate non-Fermi liquid behaviour at low temperatures. Notably, BaRu 2 P 2 exhibits an anomalous feature in the magnetic susceptibility at T ~ 260 K, similar to that observed in BaRu 2 As 2 . A comparison between the bare density of states obtained from electronic structure calculations and the experimentally estimated values suggests the presence of strong correlation effects in the material. Furthermore, the heat capacity of BaPd 2 P 2 , calculated using the full phonon dispersion relation, is in good agreement with the experimental data, particularly at low temperatures, highlighting the significant contribution of optical phonon branches to C P in this temperature range.

flat bands↗
DOE OSTI2024

Heavy dark matter in white dwarfs: multiple-scattering capture and thermalization

We present an improved treatment for the scattering of heavy dark matter from the ion constituents of a white dwarf. In the heavy dark matter regime, multiple collisions are required for the dark matter to become gravitationally captured. Our treatment incorporates all relevant physical effects including the dark matter trajectories, nuclear form factors, and radial profiles for the white dwarf escape velocity and target number densities. Our capture rates differ by orders of magnitude from previous estimates, which have typically used approximations developed for dark matter scattering in the Earth. We also compute the time for the dark matter to thermalize in the center of the white dwarf, including in-medium effects such as phonon emission and absorption from the ionic lattice in the case where the star has a crystallized core. We find much shorter thermalization timescales than previously estimated, especially if the white dwarf core has crystallized. We illustrate the importance of our improved approach by determining the cross section required for accumulated asymmetric dark matter to self-gravitate.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Impact of ionization and transport on pedestal density structure in DIII-D and Alcator C-Mod

Abstract This paper investigates the role of ionization on the pedestal structure using both measurements and modeling for H-mode plasmas on DIII-D and Alcator C-Mod to enhance our ability to predict pedestal behavior in future pilot plants. The impact of the neutral penetration depth on the pedestal density is investigated using dimensionally matching hydrogen and deuterium DIII-D H-mode discharges at low and high electron density. The DIII-D Lyman- α diagnostic measurements show that hydrogen neutrals penetrate deeper inside the plasma on both the high field and low field side, while the pedestal electron density structure is similar for both isotopes. However, as the opaqueness increases we observe that the pedestal density gradient becomes stiff, similar to prior observations on DIII-D and C-Mod (Mordijck 2020 Nuclear Fusion 60 082006). In addition, these results also confirm prior measured and modeled poloidal asymmetries in neutral densities, indicating that to make transport predictions, 2D neutral modeling is necessary. The first direct validation of SOLPS-ITER for the measured brightness, emissivity and neutral densities for three different confinement regimes on C-Mod is introduced. The SOLPS-ITER model shows good agreement, within the constrains of the model for all regimes. In addition, a comparison of SOLPS-ITER modeling for DIII-D and C-Mod shows that as opaqueness increases, the role of divertor fueling and thus poloidal asymmetries in the neutral density profiles decreases. Based on these experimental and modeling results we estimate the size of a potential particle pinch using typical values for the diffusion coefficient for both DIII-D and C-Mod H-mode discharges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Resonant shattering flares as asteroseismic tests of chiral effective field theory

Chiral effective field theory (𝜒⁢EFT) has proved to be a powerful microscopic framework for predicting the properties of neutron-rich nuclear matter with quantified theoretical uncertainties up to about twice the nuclear saturation density. Tests of 𝜒⁢EFT predictions are typically performed at low densities using nuclear experiments, with neutron star (NS) constraints only being considered at high densities. In this work, we discuss how asteroseismic quasinormal modes within NSs could be used to constrain specific matter properties at particular densities not just the integrated quantities to which bulk NS observables are sensitive. We focus on the crust-core interface mode, showing that measuring this mode's frequency would provide a meaningful test of 𝜒⁢EFT at densities around half the saturation density. Conversely, we use nuclear matter properties predicted by 𝜒⁢EFT to estimate that this mode's frequency is around 185 ± 50Hz. Asteroseismic observables such as resonant phase shifts in gravitational-wave signals and multimessenger resonant shattering flare timings, therefore, have the potential to provide useful tests of 𝜒⁢EFT.

effective field theory↗
DOE OSTI2020

Deconstructing laws of accessibility and facility distribution in cities

The era of the automobile has seriously degraded the quality of urban life through costly travel and visible environmental effects. A new urban planning paradigm must be at the heart of our road map for the years to come, the one where, within minutes, inhabitants can access their basic living needs by bike or by foot. In this work, we present novel insights of the interplay between the distributions of facilities and population that maximize accessibility over the existing road networks. Results in six cities reveal that travel costs could be reduced in half through redistributing facilities. In the optimal scenario, the average travel distance can be modeled as a functional form of the number of facilities and the population density. As an application of this finding, it is possible to estimate the number of facilities needed for reaching a desired average travel distance given the population distribution in a city.

42 ENGINEERING↗
DOE OSTI2020

FY19 FES Theory Performance Target (Final Report)

Understanding the relevant turbulent transport mechanisms at the edge of a high-performance tokamak is essential for predicting and optimizing the H-mode pedestal structure in future burning plasma devices. Global electromagnetic gyrokinetic simulations will be performed based on representative experimental pedestal scenarios in order to clarify which instabilities are most important for each of the particle and heat transport channels. Edge transport modeling will be performed in order to estimate and bound the particle and heat sources—e.g., the ionization density source and the atomic energy loss channels due to ionization, charge exchange, and radiation. Comparisons will be made with data from the DIII-D, JET, C-Mod and NSTX or MAST experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

High Yield Muon Catalyzed Fusion

Fusion holds great promise as a clean and abundant energy source. However, traditional thermonuclear fusion encounters significant challenges due to the extreme temperatures required to overcome the coulomb barrier for two nuclei to fuse. In contrast, muon-catalyzed fusion presents an alternative approach that can surmount this barrier at significantly lower temperatures. Muons, with properties resembling those of electrons but 200 times heavier, can effectively reduce the atomic orbital radius, enabling central nuclei to overcome the coulomb force through the strong force. By introducing muons into a mixture of deuterium and tritium (two hydrogen isotopes), fusion is facilitated, releasing a 3.5MeV alpha particle and a 14.1MeV neutron. In the majority of cases, the muon is liberated and can initiate further fusions. However, approximately 0.8% of the time, it adheres to the alpha particle and remains bound until it either decays or undergoes reactivation through collisional ionization. To maximize the number of fusions per muon, it is crucial to enhance the cycling rate and reactivation fraction. Theoretical predictions and experimental data both suggest that the sticking rate decreases with increasing density. However, there exists a discrepancy between experimental observations and theoretical estimations regarding the extent of this decrease. To address these disparities, this experiment aims to investigate the cycling rate and sticking fraction under higher temperatures and pressures than previously explored.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Beam Design for Muon Catalyzed Fusion

Fusion holds great promise as a clean and abundant energy source. However, traditional thermonuclear fusion encounters significant challenges due to the extreme temperatures required to overcome the coulomb barrier for two nuclei to fuse. In contrast, muon-catalyzed fusion presents an alternative approach that can surmount this barrier at significantly lower temperatures. Muons, with properties resembling those of electrons but 200 times heavier, can effectively reduce the atomic orbital radius, enabling central nuclei to overcome the coulomb force through the strong force. By introducing muons into a mixture of deuterium and tritium (two hydrogen isotopes), fusion is facilitated, releasing a 3.5MeV alpha particle and a 14.1MeV neutron. In the majority of cases, the muon is liberated and can initiate further fusions. However, approximately 0.8% of the time, it adheres to the alpha particle and remains bound until it either decays or undergoes reactivation through collisio nal ionization. To maximize the number of fusions per muon, it is crucial to enhance the cycling rate and reactivation fraction. Theoretical predictions and experimental data both suggest that the sticking rate decreases with increasing density. However, there exists a discrepancy between experimental observations and theoretical estimations regarding the extent of this decrease. To address these disparities, this experiment aims to investigate the cycling rate and sticking fraction under higher temperatures and pressures than previously explored.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Report Summarizing the Mechanical Properties of a Large ODS Ferritic Alloy Ingot by Forging at High Temperatures for Future Mother Tube Production

Oxide dispersion strengthened (ODS) ferritic alloys are considered the benchmark fuel cladding and core structural material in advanced nuclear energy reactors that require high-temperature strength and creep properties and resistance to radiation damage. The ODS ferritic alloys including 14YWT are produced by mechanical alloying (MA), which is time-consuming and is associated with high manufacturing costs that are not beneficial to being used in advanced nuclear energy reactors. This report summarizes the accomplishments in FY24 in the INM program for producing an ODS ferritic alloy by high-deformation, high-temperature processing of reactive and ferritic alloy powders for advanced reactor fuel cladding applications. Following four hot forging experiments, it was concluded that several significant challenges were encountered that were difficult to overcome. These challenges were related to using high annealing temperatures for pressure assisted sintering processes to produce dense microstructures, but the high annealing temperatures result in long range diffusion of Ti through the bcc Fe lattice and react with the YIG particles that are distributed on the prior surfaces of the ferritic alloy powders. In addition, it was determined that the high deformations induced by forging at high temperatures were not very effective for fracturing the reactive YIG particles into smaller particles and distributing them into the interior of the ferritic alloy powders. Spark plasma sintering was attempted for shortening the time at high temperatures, which led to full densification but the microstructure characterization results still showed that Ti atoms diffused over long distances in the bcc Fe lattice and reacted with the YIG particles. Finally, a short 30 minute high intensity ball milling experiment was conducted on blended 14WT and YIG powders for inducing severe deformations that caused the initially spherical powders of 14WT decorated with the YIG particles on the surfaces to transform to flakes and fracturing of YIG particles into smaller particles that were incorporated into the bcc Fe lattice. Two forgings were performed with the high intensity milled powders: first annealing for 20 minutes at 850ºC followed by forging and second annealing for 20 minutes at 1,100ºC followed by forging. At 850ºC, Ti atoms are effectively immobile, thus allowing for densification albeit incomplete. The deformation by forging after annealing for 20 minutes at 1,100ºC favored dynamic recrystallization processes that led to nano-size grains with very high stored energy due to high dislocation density. The corresponding VH data showed significant hardening that correlated with estimated strengthening of ~1650 MPa. This hybrid processing approach combining high intensity ball milling of powder with annealing and forging showed the most promise for producing an oxide dispersing strengthened ferritic alloy.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A Quantum-mechanical Treatment of Electron Broadening in Strong Magnetic Fields

Abstract Spectral line-shape fitting is an extremely useful tool in determining the gravity of white dwarf stars. This method is so far limited to nonmagnetic white dwarfs largely because the theory of line broadening in high magnetic fields is not as complete as in the nonmagnetic case. Current Stark+Zeeman models treat plasma particles classically and ignore the motion of the nucleus. We develop the formalism for a quantum-mechanical treatment of the perturbing electrons and include the nuclear motion as part of the broadening and explore their relative importance. The conditions we explore are those found in white dwarf and neutron star atmospheres. We find that, contrary to previous studies, the quantized perturbing electrons create more broadening than perturbers on a straight-path trajectory. Additionally, the quantization of the plasma electrons gives rise to resonances away from the line center. The nuclear motion creates an additional electric field, which also leads to an increase in line broadening; however, this effect in neutron star atmospheres is not as large as previously estimated. This suggests that neutron star spectral lines are sensitive to density and that their mass and radius can be obtained from spectral line fitting, which would help constrain the neutron star equation of state.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1973

The ultraviolet /1200-1900 Angstrom/ spectrum of Venus

A far-ultraviolet moderate-resolution spectrum of Venus has been obtained by using an accurately pointed rocket-borne telescope-spectrophotometer. H I 1216 A, O I 1304 A, O I 1356 A, C I 1561 A, C I 1657 A, and the CO fourth-positive band system were observed in emission. Brightnesses and upper limits for other emissions are reported. An estimate of the O concentration indicates approximately 10% at a column density of 4 x 10 to the 16th power CO2 per sq cm. The large CO fourth-positive emission indicates that the CO concentration is also high.

Rottman, G. J.↗
NASA NTRS1974

Simulation of real-gas effects for Mars entry

The changes in aerodynamic characteristics due to real-gas effects associated with high speed flight (characterized by large shock density ratios) are primarily the result of changes in surface pressures acting on the forebody. The surface pressures are affected by a change in shock density ratio (real-gas effects) in two ways. First, the level of pressure at the stagnation point relative to freestream dynamic pressure is changed, and second, the distribution of surface pressure relative to stagnation-point pressure is changed. The density-ratio effect on the stagnation point pressure level can be estimated by considering the flow of a perfect gas about a blunt body.

Hunt, J. L.↗
NASA NTRS1974

Effect of anode ring arrangement on the spectroscopic characteristics of the NASA Lewis bumpy torus plasma

The modified Penning discharge in the NASA Lewis Bumpy Torus is normally produced by an anode ring at high voltage in each of the 12 magnetic mirror midplanes. For this investigation, the plasma was run with 12, 6, 3, and 1 anode rings. When 3 anode rings were used, the spectroscopically determined relative electron density and mean ion residence time increase by factors of 10 and 5, respectively, in one mode of operation. The discharge is observed to uniformly fill all bumps around the torus regardless of the anode arrangement and number. A plasma density on axis of 10 to the 11th power cm/3 is estimated for the 3 anode case in one mode of operation based on an observed discharge current to ion loss rate correlation and a measured mean ion residence time of .5 msec.

Richardson, R. W.↗
NASA NTRS1978

On the stability of disklike galaxies in massive halos

Results are reported for a series of disk-galaxy simulations carried out as part of a systematic search for disk-galaxy models that show little change over the time of several galactic rotations. Systems in a given fixed external field, such as might be provided by a massive halo, are considered. The analysis is performed in terms of two parameters: the fraction of the total mass that resides in the active disk and the velocity dispersion in the active disk. The amount of halo mass required to stabilize a disk with a given velocity dispersion is investigated along with the question of whether any amount of halo mass can stabilize a completely 'cold' disk galaxy. The experimental results are quoted as growth rates estimated from plots of the amplitudes of Fourier analyses of the density in each of a set of narrow annuli, and systematic trends in the dependence of growth rates on the adjustable parameters are examined. It is shown that a massive inert halo contributes to the stability of disk-galaxy models, but some velocity dispersion is required.

Miller, R. H.↗