Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Fulde-Ferrell-Larkin-Ovchinnikov pairing in one-dimensional optical lattices

Spin-polarized attractive Fermi gases in one-dimensional (1D) optical lattices are expected to be remarkably good candidates for the observation of the Fulde-Ferrell-Larkin-Ovchinnikov (FFLO) phase. We model these systems with an attractive Hubbard model with population imbalance. By means of the density-matrix renormalization-group method, we compute the pairing correlations as well as the static spin and charge structure factors in the whole range from weak to strong coupling. We demonstrate that pairing correlations exhibit quasi-long-range order and oscillations at the wave number expected from the FFLO theory. However, we also show by numerically computing the mixed spin-charge static structure factor that charge and spin degrees of freedom appear to be coupled already for a small imbalance. We discuss the consequences of this coupling for the observation of the FFLO phase, as well as for the stabilization of the quasi-long-range order into long-range order by coupling many identical 1D systems, such as in quasi-1D optical lattices.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Reversible ratchet effects for vortices in conformal pinning arrays

A conformal transformation of a uniform triangular pinning array produces a structure called a conformal crystal which preserves the sixfold ordering of the original lattice but contains a gradient in the pinning density. Here we use numerical simulations to show that vortices in type-II superconductors driven with an ac drive over gradient pinning arrays produce the most pronounced ratchet effect over a wide range of parameters for a conformal array, while square gradient or random gradient arrays with equivalent pinning densities give reduced ratchet effects. In the conformal array, the larger spacing of the pinning sites in the direction transverse to the ac drive permits easy funneling of interstitial vortices for one driving direction, producing the enhanced ratchet effect. In the square array, the transverse spacing between pinning sites is uniform, giving no asymmetry in the funneling of the vortices as the driving direction switches, while in the random array, there are numerous easy-flow channels present for either direction of drive. We find multiple ratchet reversals in the conformal arrays as a function of vortex density and ac amplitude, and correlate the features with a reversal in the vortex ordering, which is greater for motion in the ratchet direction. In conclusion, the enhanced conformal pinning ratchet effect can also be realized for colloidal particles moving over a conformal array, indicating the general usefulness of conformal structures for controlling the motion of particles.

36 MATERIALS SCIENCE↗

Evidence for stable square ice from quantum Monte Carlo

Recent experiments on ice formed by water under nanoconfinement provide evidence for a two-dimensional (2D) “square ice” phase. However, the interpretation of the experiments has been questioned and the stability of square ice has become a matter of debate. Partially this is because the simulation approaches employed so far (force fields and density functional theory) struggle to accurately describe the very small energy differences between the relevant phases. Here we report a study of 2D ice using an accurate wave-function based electronic structure approach, namely diffusion Monte Carlo (DMC). We find that at relatively high pressure, square ice is indeed the lowest enthalpy phase examined, supporting the initial experimental claim. Moreover, at lower pressures, a “pentagonal ice” phase (not yet observed experimentally) has the lowest enthalpy, and at ambient pressure, the “pentagonal ice” phase is degenerate with a “hexagonal ice” phase. Our DMC results also allow us to evaluate the accuracy of various density functional theory exchange-correlation functionals and force field models, and in doing so we extend the understanding of how such methodologies perform to challenging 2D structures presenting dangling hydrogen bonds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Propagation of statistical uncertainties of Skyrme mass models to simulations of r -process nucleosynthesis

Uncertainties in nuclear models have a major impact on simulations that aim at understanding the origin of heavy elements in the universe through the rapid neutron capture process ( r process) of nucleosynthesis. Within the framework of the nuclear density functional theory, we use results of Bayesian statistical analysis to propagate uncertainties in the parameters of energy density functionals to the predicted r -process abundance pattern, by way not only of the nuclear masses but also through the influence of the masses on β -decay and neutron capture rates. We point out the importance of the nonequilibrium end stage of the r process in determining the width of the resulting abundance pattern uncertainty bands. We additionally make the first identifications of specific parameters of Skyrme-like energy density functionals which show tentative correlations with particular aspects of the r -process abundance pattern. While previous studies have explored the reduction in the abundance pattern uncertainties due to anticipated new measurements of neutron-rich nuclei, here we point out that an even larger reduction will occur when these new measurements are used to reduce the uncertainty of model predictions of masses, which are then propagated through to the abundance pattern. We make a quantitative prediction for how large this reduction will be.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Response of spin polarized neutron matter under the presence of a strong magnetic field with Skyrme interactions

The effects of a strong magnetic field in the dynamical response of a pure neutron system to a weak neutrino probe are studied within the framework of the Landau Fermi liquid theory in the nonrelativistic Hartree-Fock approximation at zero temperature. We use Skyrme forces to parametrize the partially magnetized nuclear interacting plasma and describe its collective modes. We study the vector and vector-axial matter response functions and the neutrino mean free path in this two-component fermion system with net spin polarization and density-dependent in-medium correlations. We find a decrease in the neutrino opacity of magnetized matter with respect to the nonmagnetized case for fields log{sub 10} B(G) > or approx. 17.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Isospin-Breaking Corrections to Superallowed Fermi Beta Decay in Isospin- and Angular-Momentum-Projected Nuclear Density Functional Theory

Background: Superallowed -decay rates provide stringent constraints on physics beyond the standard model of particle physics. To extract crucial information about the electroweak force, small isospin-breaking corrections to the Fermi matrix element of superallowed transitions must be applied. Purpose: We perform systematic calculations of isospin-breaking corrections to superallowed decays and estimate theoretical uncertainties related to the basis truncation, to time-odd polarization effects related to the intrinsic symmetry of the underlying Slater determinants, and to the functional parametrization. Methods: We use the self-consistent isospin- and angular-momentum-projected nuclear density functional theory employing two density functionals derived from the density-independent Skyrme interaction. Pairing correlations are ignored. Our framework can simultaneously describe various effects that impact matrix elements of the Fermi decay: symmetry breaking, configuration mixing, and long-range Coulomb polarization. Results: Isospin-breaking corrections to the I=0+, T=1 I=0+, T=1 pure Fermi transitions are computed for nuclei from A=10 to A=98 and, for the first time, to the Fermi branch of the I,T=1/2 I, T=1/2 transitions in mirror nuclei from A=11 to A=49. We carefully analyze various model assumptions impacting theoretical uncertainties of our calculations and provide theoretical error bars on our predictions. Conclusions: The overall agreement with empirical isospin-breaking corrections is very satisfactory. Using computed isospin-breaking corrections we show that the unitarity of the CKM matrix is satisfied with a precision of better than 0.1%.

Satula, W.↗

Color Screening by Pions

Lattice QCD is used to calculate the potential between a static quark and antiquark in the presence of a finite density of {pi}{sup +}'s. Correlation functions of multiple {pi}{sup +}'s are used in conjunction with Wilson-loop correlators to determine the difference between the QQ potential in free space and in the presence of a pion condensate. The modifications to the potential are found to have significant dependence on the QQ separation over the range r or approx. 1 fm explored in this work. Our results are consistent with the pion-condensate behaving as a (nonlinear) chromodielectric.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Universal Maximum Strength of Solid Metals and Alloys

As described here, interstitial electron density ρ o is offered as a direct metric for maximum strength in metals, arising from universal properties derived from an electron-gas – ρ o sets the exchange-correlation parameter r s in density-functional theory (DFT). It holds also for maximum shear strength τ max in polycrystals [Phys. Rev. Lett. 124, 125501]. Elastic moduli and τ max for polycrystalline (amorphous) metals are linear with ρ o and melting T m (glass-transition T g ) temperature. ρ o or r s , even with rule-of-mixture estimate, predicts relative strength for rapid, reliable selection of high-strength alloys with ductility, as confirmed for elements to steels to complex solid-solutions, and validated experimentally.

36 MATERIALS SCIENCE↗

Nitrogen fertilization effects on aged Miscanthus × giganteus stands: Exploring biomass yield, yield components, and biomass prediction using in–season morphological traits

For sustainable biomass production of Miscanthus × giganteus (hereafter miscanthus), understanding the impact of stand age and nitrogen (N) fertilization on biomass yield is crucial. This study investigated the effects of varying N fertilization rates (0, 56, 112, and 168 kg N ha –1 ) on yield components (tiller height, density, and weight) and their correlations with end-of-season biomass yield in miscanthus. We also explored end-of-season biomass yield prediction using in-season traits (canopy height, leaf area index, and leaf chlorophyll content [LCC]). The study was conducted at two sites in Illinois: a previously unfertilized 10-year-old miscanthus research stand at Urbana and a 16-year-old commercial stand at Pesotum with a history of annual 56N application. Results from 2018 to 2021 in Urbana and 2020 to 2021 in Pesotum showed increased biomass yields with N fertilization, varying by rate, year, and location. Biomass yield in Pesotum peaked at 56N, while in Urbana, it increased significantly at 112 kg N ha –1 . Biomass yield was strongly correlated with tiller height and weight measured at Urbana across N rates. Morphological traits measured every 2–3 weeks during the 2020 and 2021 growing seasons showed that canopy height was the strongest single predictor of miscanthus biomass yield, followed by LCC. Mid-August to September measurements of these traits were the best predictors of biomass yield. Multiple regressions involving the canopy height and LCC further improved yield predictions. We conclude that while N enhances biomass yields of aging miscanthus, the optimum rate depends on the site, environmental conditions, and management history.

59 BASIC BIOLOGICAL SCIENCES↗

The Change of X‐ray Diffraction Peak Width During in situ Conventional Sintering of Nanoscale Powders

Diffraction peaks of nanoscale particles of 3 mol% yttria‐stabilized zirconia become sharper as the powder sinters. The reduction in the peak width is correlated with the increase in density. The sharpening of the peak agrees reasonably well with the remaining free surface area as the sample sinters. Therefore, high curvature of the free surface of the pores is assumed to lead to peak broadening (the grain boundaries that grow at the expense of the free surfaces of the pores do not have this curvature). The change in the grain size during sintering does not make a significant contribution to peak width.

Lebrun, Jean‐Marie↗

Revisiting metastable immiscibility in SiO 2 –Al 2 O 3 : Structure and phase separation of supercooled liquids and glasses

Understanding and controlling liquid–liquid phase separation in aluminosilicates is crucial for optimizing glass properties. However, the metastable nature of aluminosilicates’ phase separation has made it difficult to study experimentally, and uncertainty persists regarding the compositional and temperature extents of the miscibility gap. Here, we present new experimental evidence that suggests a consolute temperature between 1440 and 1590°C and endmember compositions of 7 and 62 mol.% Al 2 O 3 for the phase-separated glasses. Using containerless melt processing, deeply supercooled liquids over the 0–60 mol.% Al 2 O 3 range are probed with in situ small- and wide-angle X-ray scattering, which simultaneously reveals changes in nanoscale density heterogeneity and atomic structure. Correlations between phase separation and atomic coordination environments are compared for liquids and glasses. Pair distribution function analysis shows mean O–(Si + Al) coordination increases with Al 2 O 3 content and decreases with temperature.

36 MATERIALS SCIENCE↗

Nanorelief of the natural cleavage surface of triglycine sulphate crystals with substitutional and interstitial impurities

Ferroelectric triglycine sulphate crystals (TGS) with substitutional (LADTGS+ADP, DTGS) and interstitial (Cr) impurities have been studied by atomic-force microscopy, X-ray diffraction, and X-ray fluorescence. The nanorelief parameters of the mirror cleavage TGS(010) surface have been measured with a high accuracy. A correlation between the crystal defect density in the bulk and the cleavage surface nanorelief is revealed at the submicrometer level.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Passive Mitigation of Cascading Propagation in Multi-Cell Lithium Ion Batteries

The heat generated during a single cell failure within a high energy battery system can force adjacent cells into thermal runaway, creating a cascading propagation effect through the entire system. This work examines the response of modules of stacked pouch cells after thermal runaway is induced in a single cell. The prevention of cascading propagation is explored on cells with reduced states of charge and stacks with metal plates between cells. Reduced states of charge and metal plates both reduce the energy stored relative to the heat capacity, and the results show how cascading propagation may be slowed and mitigated as this varies. These propagation limits are correlated with the stored energy density. Results show significant delays between thermal runaway in adjacent cells, which are analyzed to determine intercell contact resistances and to assess how much heat energy is transmitted to cells before they undergo thermal runaway. A propagating failure of even a small pack may stretch over several minutes including delays as each cell is heated to the point of thermal runaway. This delay is described with two new parameters in the form of gap-crossing and cell-crossing time to grade the propensity of propagation from cell to cell.

25 ENERGY STORAGE↗

ExchCXX v0.1.0

ExchCXX is a modern C++ library for the evaluation of exchange-correlation (XC) functionals required for density functional theory (DFT) calculations. In addition to providing high-level wrappers for the ubiquitous Libxc library for the CPU evaluation of XC functionals, ExchCXX also provides locally developed implementations of a small subset of XC functionals which may be evaluated either on the host (CPU) or device (GPU, FPGA, etc).

Williams-Young, David↗

A Literature Review of Shock Sensitivity Changes of TATB Due to Thermal Cycling

Insensitive high explosives (IHEs) based on 1,3,5-triamino 2,4,6-trinitro-benzene (TATB) are the IHEs of choice for use in nuclear warheads over conventional high explosives when safety is the only consideration, because they are very insensitive to thermal or mechanical initiation stimuli. It is this inherent insensitivity to high temperatures, shock, and impact, which provides detonation design challenges when designing TATB explosive systems while at the same time providing a significant level of protection against accidental initiation. Although classified as IHE, over the past few years the focus on explosive safety has demonstrated that the shock sensitivity of TATB is influenced with respect to temperature. A number of studies have been performed on TATB and TATB formulations, plastic bonded explosives (PBX) 9502, and LX-17-01 (LX-17), which demonstrates the increase in shock sensitivity of the explosive after it has been preheated or thermally cycled over various temperature ranges. Many studies suggest the change in sensitivity is partly due to the decomposition rates of the temperature elevated TATB. Others point to the coefficient of thermal expansion, the crystalline structures of TATB and/or the combination of all factors, which create voids which can become active hot spots. During thermal cycling, TATB is known to undergo an irreversible increase in specific volume called ratchet growth. This increase in specific volume correlates to a decrease in density. This decrease in density and increase in volume, demonstrate the creations of additional void spaces which could serve as potential new initiation hot spots thus, increasing the overall sensitivity of the HE. This literature review evaluates the published works to understand why the shock sensitivity of TATB-based plastic bonded explosives (PBXs) changes with temperature.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Nanoscale Ferroelectric Control of Novel Electronic States in Layered Two-Dimensional Materials (Final Report)

In this DOE Early Career project “Nanoscale Ferroelectric Control of Novel Electronic States in Layered Two-Dimensional Materials,” the PI’s group has combined ferroelectric field effect with nanoscale domain imaging and writing to design the electronic and optical properties of two-dimensional (2D) van der Waals materials, including graphene and transition metal dichalcogenides MoS2 and ReS2. The van der Waals materials have been prepared into field effect transistor (FET) devices with ferroelectric gates. Through domain patterning in a ferroelectric polymer PVDF-TrEF top-gate via conductive atomic force microscopy, the team has created programmable Schottky junctions in monolayer MoS 2 , where both barrier height and I-V rectifying polarity can be reconfigured. The transport anisotropy of monolayer to few-layer ReS 2 has been mapped out by defining the entire channel into an insulating state and creating nanoscale conducting paths along different directions through domain writing in the ferroelectric top-gate. The result shows that the conductivity along and perpendicular to the Re-chain can differ by >5.5x10 4 . Theoretical modeling points to the band origin of the transport anomaly and reveals the emergence of a flat band in few-layer ReS 2 . The interfacial epitaxial relation between ReS 2 and PVDF-TrFE further promotes the formation of close-packed, highly ordered PVDF-TrFE nanowires with width of 35 nm and 10 nm. Nonvolatile modulation of quantum Hall effect has been achieved in graphene FETs with a ferroelectric oxide Ba 0.4 Sr 0.6 TiO 3 back-gate. Scattering from the remote surface optical phonon in Ba 0.4 Sr 0.6 TiO 3 limits the room temperature mobility of graphene to be about 3x10 4 cm 2 /Vs. Steep-slope switching has been achieved in MoS 2 FETs back-gated by polycrystalline Pb(Zr,Ti)O 3 , which signals a static-state negative capacitance mode without involving an additional dielectric layer. Piezoresponse force microscopy studies show that the sub-threshold swing can be well correlated with the domain wall density in Pb(Zr,Ti)O 3 . The team also observes an unconventional filtering effect of the second harmonic generation response at the MoS 2 /Pb(Zr,Ti)O 3 heterointerface, which can be accounted for by the alignment between one of the polar axes of MoS 2 and the chiral dipole rotation at the surface of domain wall in Pb(Zr,Ti)O 3 . The research supported by this DOE grant has significantly advanced the fundamental understanding and functional design of ferroelectric/2D van der Waals heterostructures for their implementation towards energy applications.

36 MATERIALS SCIENCE↗

Study of the Nucleation and Growth of YBCO on Oxide Buffered Metallic Tapes

The CRADA collaboration concentrated on developing the scientific understanding of the factors necessary for commercialization of high temperature superconductors (HTS) based on the YBCO coated conductor technology for electric power applications. The project pursued the following objectives: 1. Establish the correlations between the YBCO nuclei density and the properties of the CeO{sub 2} layer of the RABiTS{trademark} template; 2. Compare the nucleation and growth of e-beam and MOD based precursors on the buffered RABiTS{trademark} templates and clarify the materials science behind the difference; and 3. Explore routes for the optimization of the nucleation and growth of thick film MOD precursors in order to achieve high critical current densities in thick films. The CRADA work proceeded in two steps: 1. Detailed characterization of epitaxial ceria layers on “model” substrates, such as (001) YSZ and on RABiTS tapes; and 2. Study of YBCO nucleation on well-defined substrates and on long-length RABiTS.

36 MATERIALS SCIENCE↗