The Mu2e: The Muon to Electron Conversion Experiment [PowerPoint]
The presentation covers the topics: what we are looking for; experimental method employed by Mu2e; hardware and infrastructure; current status of hardware; and looking further ahead.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The presentation covers the topics: what we are looking for; experimental method employed by Mu2e; hardware and infrastructure; current status of hardware; and looking further ahead.
The Mu2e experiment at Fermilab is described. Areas covered include: Charged Lepton Flavor Violation (CLFV); CLFV measurements; Muon to electron conversion search on Mu2e; The experimental apparatus; Current status; and, Next plan -- Mu2e II.
The Workshop on Transients in Tokamak Plasmas established the current status and future needs and identified research opportunities for suppressing or mitigating the effects of the most serious transient phenomena in tokamak plasmas: Edge-Localized Modes (ELMs) and disruptions. These transients are usually associated with certain magnetohydrodynamic (MHD) instabilities that can exhibit rapid nonlinear growth.
This document reports on the Oneida Indian Nation's to upgrade and improve the operation of the Nation’s Central Utility Plant (CUP) so that previously wasted energy could be captured and utilized to produce electricity. The final technical report contains an overview of the project and the project objectives, which are increased energy efficiency, reduced dependency on fossil fuels, and lower energy costs while maintaining sound environmental stewardship of natural resources. The report describes the specific activities and milestones accomplished, a summary of the current status of the project, including objectives and results achieved, and a description of project management, challenges and lessons learned.
A new language is beneficial to take advantage of emerging architectures, and existing and new software technologies. Contra is a new language to provide performance portable code and consists of two innovations, which are described. A current status and illustrations of the code are shown.
This Issue Brief examines state interconnection policies that apply to CHP throughout the United States. It discusses barriers to CHP interconnection and describes elements of effective interconnection standards. The information in this document is intended to help inform state regulators, policy makers, utility personnel, electricity customers, and other stakeholders about the current status of CHP interconnection requirements, and how the interconnection process could be improved to accelerate the adoption of CHP.
The sensor configuration/deployment method has critical impacts on energy efficient building control and thermal comfort. However, traditional sensor techniques for building operation and fault detection and diagnostics (FDD) are not necessarily optimal in terms of energy efficiency and thermal comfort, and their global effects are not thoroughly investigated. In an effort to address and overcome this limitation, a multilaboratory and multiyear project, “Sensor Impact Evaluation and Verification,” was proposed. Its purpose is to develop a framework to investigate the impacts of sensor deployment and configuration on building energy optimization, FDD, occupant thermal comfort, and potentially grid efficiency. The first project task was a literature review to establish a solid knowledge of and a background related to sensor technologies and placement. To accomplish this task, an extensive review of previous research literature was performed. A series of expert interviews were conducted to augment the findings of the literature review. This report summarizes the interview design and interview results and findings. The interview was designed and performed to (1) investigate the current status and limitations of sensor configuration, (2) identify the research gaps and expectations for potential improvements in sensor configuration and deployment, and (3) integrate expert (e.g., researcher, building operation practitioner) knowledge and experience to develop use-case scenarios.
The design of a replacement cold neutron guide system for the High Flux Isotope Reactor (HFIR) is presented. The proposed six-channel design uses the latest technologies and is optimally designed to account for operational and site constraints. These include the design of the cold source and the beam tube, the size and shape of the penetrations in the reactor confinement boundary, and the shape and orientation of the guide hall. The existing user instruments are a macromolecular diffractometer (IMAGINE), an IMAGING station, two small-angle neutron scattering (SANS) instruments (Bio-SANS and GP-SANS), and a cold triple-axis spectrometer (C-TAX). These instruments will all be reinstalled at end-of-guide positions with improved performance, and a position for a new high-performance neutron spin echo instrument will be created. The proposed guide design requires an extension to the guide hall toward the south. The calculated flux gain for a typical experiment is between a factor of 1.3 and 3 for all instruments, with the exception of the C-TAX instrument, which stands to gain a factor of >30 in flux at the sample. The new guide system will also offer additional performance gains, such as an increase in Q-range on Bio-SANS. The stated performance gains do not take into account any potential performance gains resulting from renewal and realignment of the guide system. The design of the guide system in the common sections up to about 25 m from the source is considered to be complete and ready for engineering design, while the designs of the instrument-specific guides are in some cases still a work in progress. The present report describes the current status of those designs.
The purpose of this report is to benchmark the latest experimental developments across a number of potential bioconversion pathways as quantified by modeled minimum fuel selling prices (MFSPs), as a measure of current status relative to those final targets. For this state of technology, TEA models were run for two separate biological conversion pathways to fuels, based on available data for integrated biomass deconstruction and hydrolysate processing; namely carboxylic acids (primarily butyric acid) and diols (2,3-butanediol [BDO]), reflecting NREL’s recently-published 2018 biochemical design report focused on those two pathways. The models were run across three scenarios for lignin utilization, namely combustion, conversion to coproducts based on “base case” performance with biomass hydrolysate, and conversion to coproducts based on “high” performance demonstrated with model lignin monomer components.
In the realm of information extraction from text data, there exists a number of tools with the capability of extracting entities and their relationships with one another. Such information has endless uses in a number of domains, however, the solutions to getting this information is still in early stages and has room for improvement. The topic has been explored from a research perspective by academic institutions, as well as formal tool creation from corporations. Overall, entity extraction is common among these tools, though with varying degrees of accuracy, while relationship extraction is more difficult to find. In this report, we take a look at the top state of the art tools currently available and identify their capabilities, strengths, and weaknesses. We explore the common algorithms in the successful approaches and their ability to efficiently handle both structured and unstructured text data. Finally, we highlight some of the common issues among these tools and summarize the current status in the area of entity-relationship extraction.
In this paper the National Renewable Energy Laboratory (NREL) explores the commercial and industrial (C&I) energy efficiency market in the Dominican Republic, including the market’s current status. During NREL’s engagement with its Dominican counterparts, NREL noted market gaps, identified by both public and private sector market actors, that became the focus of this report. The intent is two-fold. First, to assist potential customers, project financing institutions, and various government agencies understand where the energy efficiency sector stands, in August 2020. Second to help them recognize the scope, scale, and opportunity for energy savings from untapped potential large reductions in energy expenditures. This research identified how savings could be captured through improvements to the enabling environment, technical capacity, and level of activity in the sector. Moreover, it determined that through taking action to catalyze energy efficiency investment, the government could make significant progress towards its self-declared NDC goals, and result in tens of millions of dollars in savings across the Dominican economy for both the private and public sectors.
This document summarizes the current software development activities carried by the ESGF team with planned delivery dates before the transition of the project to a new team. The work we started on the publishing, search and retrieval, and the backend for indexing and data management that can be deployed using Kubernetes are planned to be delivered within the next three months; however, this assumes that the current team members will continue to work on the project. The activities are listed in Table 1 by priority and in case we lose team members, development of lower priority tasks can be paused and passed to the new team with its current status. Team members can be re-assigned based on their availability and transition work needed. Table 2 below describe activities necessary to help project transition to the new team. Deadlines for these activities are before October 1 st of 2022 or the completion of a successful transition. Support during the transition period assumes that we will have 3 key ESGF members and the ESGF PI supported at the 50% level or less for the duration of the transition. The level of support is an estimate, and it depends on several factors that cannot be decided at this time. The total cost of the proposed work and support activities for fiscal year 2021 is $1,270K with $230K carry over to fiscal year 2022. The cost for the support work listed in Table 2 is the sum of the two rows “HW support” and “project support, maintenance, and transition efforts”, colored blue, in Table1 which adds up to $720K. This cost is included in the $1,270K cost in table 1.
Outline for this presentation includes: Introduction; Comparison between Cu, Nb, Nb 3 Sn and MgB 2 ; A brief current status of MgB 2 development for SRF cavities; What needs to be done for HEP; and Other applications.
The annual State of Technology (SOT) assessment is an essential activity for biochemical platform research. It allows the impact of research progress to be quantified in terms of economic improvements in the overall cellulosic biofuel production process for a particular conversion pathway. As such, initial benchmarks can be established for currently demonstrated performance and progress can be tracked towards out-year goals to ultimately demonstrate cost-competitive cellulosic biofuel technology. The purpose of this report is to benchmark the latest experimental developments across a number of potential bioconversion pathways as quantified by modeled minimum fuel selling prices (MFSPs), as a measure of current status relative to those final targets. For this state of technology, TEA models were run for two separate biological conversion pathways to fuels, based on available data for integrated biomass deconstruction and hydrolysate processing; namely carboxylic acids (primarily butyric acid) and diols (2,3-butanediol [BDO]), reflecting NREL's recently-published 2018 biochemical design report focused on those two pathways. The models were run across three scenarios for lignin utilization, namely combustion, conversion to coproducts based on "base case" performance with biomass hydrolysate, and conversion to coproducts based on "high" performance demonstrated with model lignin monomer components. Relative to prior 2019 benchmarks, the 2020 SOT achieved further MFSP reductions of approximately $1/gallon gasoline equivalent, primarily attributed to improvements in pretreatment that led to both cost reductions and yield improvements.
This document satisfies the M3 milestone M3SF-21OR010304082 titled “ORNL Input to GDSA Repository Systems.” This document describes the current status of Oak Ridge National Laboratory’s (ORNL’s) efforts related to analyses of dual-purpose canister (DPC) disposal in unsaturated alluvium with a focus on thermal hydrological constraints on criticality timing and power output. This analysis updates previous analyses of thermal hydrological constraints on timing and power output of a potential criticality event in Dual-Purpose Canisters (DPCs) in a hypothetical repository in unsaturated alluvium using a more realistic representation of heat transport inside dry DPCs. PFLOTRAN was used for the simulations of multiphase thermal hydrology near a single DPC. The scenario considers a DPC failure at 9000 years, allowing water to enter and eventually fill the DPC. Once the DPC is filled to a level that could support a criticality event, different values for criticality power output were added to the decay heat. The main objective is to bound the power output that could be produced by a criticality event without driving water out of the package. For the conditions analyzed here, following a package breach, the alluvial formation could supply enough water to allow enough accumulation in the DPC to support a criticality event. However, the power output that would be generated is limited to modest values by loss of water moderator due to evaporation and vapor diffusion. In the reference case scenario, the DPC would not start to fill with water until about 16,000 years post closure and would not fill to a level that allows a criticality event until approximately 25,000 years post closure. The long-term average power output that could be sustained without driving off the water and terminating the criticality event is limited to approximately 100 W. Sensitivity to assumed conditions and parameters in the reference case, especially the deep percolation rate, need to be addressed but could not be undertaken because of numerical failures of the PFLOTRAN code running in general mode in the dry conditions of an unsaturated alluvium repository
The goal of this Phase II Topical Report is to summarize the work for public domain conducted on project DE-FE0031583. Building upon the Design Basis completed during Phase I and in accordance with the Statement of Project Objectives (SOPO), the University of Kentucky (UK) Center for Applied Energy Research (CAER) (Recipient) along with team members has completed the Front End Engineering Design (FEED) for its advanced, versatile post-combustion CO 2 capture system (CCS) at the 10 MWe large pilot scale to be installed at the Wyoming (WY) Integrated Test Center (ITC), using a heat integrated process with split-rich fed, two-stage stripping and any advanced solvent to enhance the CO 2 absorber performance and lower the cost of CO 2 capture. The proposed project (Phases I-III) involves the design, fabrication, installation, testing and evaluation of a large pilot scale facility that will demonstrate the UK CAER transformative CCS integrated with an operating power plant. The work performed in Phase I, detailed in the Phase I Topical Report that was submitted in March 2019, included formation of a project team, securing the host site, and completing pre-FEED design basis, a cost estimation, a preliminary techno-economic analysis (TEA) and an environmental information volume (EIV). The work performed in Phase II, detailed in this Phase II Topical Report, includes completion of FEEDs, completion of a process risk analysis (PRA), obtaining necessary permits, updating the EIV and TEA, updating the cost and schedule estimate for the Phase III scope of work (SOW) and securing the necessary cost share. Updated information is provided on the current status of the UK CAER CCS technology and the project is ready to begin immediately detailed design, construction and operation of the proposed pilot.
Distributed Energy Resources (DER) is increasing in the U.S and affect the utility grid operation and consumer power access. This report summaries the current status and the best practices of DER application in the U.S.
The annual State of Technology (SOT) assessment is an essential activity for biochemical platform research. It allows the impact of research progress to be quantified in terms of economic improvements in the overall cellulosic biofuel production process for a particular conversion pathway. As such, initial benchmarks can be established for currently demonstrated performance and progress can be tracked towards out-year goals to ultimately demonstrate cost-competitive cellulosic biofuel technology. The purpose of this report is to benchmark the latest experimental developments across a number of potential bioconversion pathways as quantified by modeled minimum fuel selling prices (MFSPs), as a measure of current status relative to those final targets. For this state of technology, TEA models were run for two separate biological conversion pathways to fuels, based on available data for integrated biomass deconstruction and hydrolysate processing; namely carboxylic acids (primarily butyric acid) and diols (2,3-butanediol [BDO]), reflecting NREL's recently-published 2018 biochemical design report focused on those two pathways. The models were run across three scenarios for lignin utilization, namely combustion, conversion to coproducts based on "base case" performance with biomass hydrolysate, and conversion to coproducts based on "high" performance demonstrated with model lignin monomer components. A key improvement reflected in the 2021 SOT is centered around making use of the latest lignin conversion data, which over the past year focused primarily on production of ß-ketoadipate (BKA) as a more optimal molecule compared to the closely-related adipic acid coproduct of prior recent focus, both in terms of superior product properties and biology, as well as reduced processing complexity (reducing two steps for sequential production of muconate followed by hydrogenation to adipic acid down to a single step for direct production of BKA). This update translated to a roughly 17% increase in mass yield of final coproduct output at a nearly four-fold increase in fermentation productivity on lignin monomers relative to prior 2020 SOT benchmarks for muconic/adipic acid production.