Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “convergence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

RAYLEIGH QUOTIENT ITERATION IN 3D, DETERMINISTIC NEUTRON TRANSPORT

Today’s “grand challenge” neutron transport problems require 3-D meshes with billions of cells, hundreds of energy groups, and accurate quadratures and scattering expansions. Leadership-class computers provide platforms on which high-fidelity fluxes can be calculated. However, appropriate methods are needed that can use these machines effectively. Such methods must be able to to use hundreds of thousands of cores and have good convergence properties. Rayleigh quotient iteration (RQI) is an eigenvalue solver that has been added to the SN code Denovo to address convergence. Rayleigh quotient iteration is an optimal shifted inverse iteration method that should converge in fewer iterations than the more common power method and other shifted inverse iteration methods for many problems of interest. Denovo’s RQI uses a new multigroup Krylov solver for the fixed source solutions inside every iteration that allows parallelization in energy in addition to space and angle. This Krylov solver has been shown to scale successfully to 200,000 cores: for example one test problem scaled from 69,120 cores to 190,080 cores with 98% efficiency. This paper shows that RQI works for some small problems. However, the Krylov method upon which it relies does not always converge because RQI creates ill-conditioned systems. This result leads to the conclusion that preconditioning is needed to allow this method to be applicable to a wider variety of problems.

Slaybaugh, R. N.↗

Experiments of shock associated noise of supersonic jets

The paper examines the aeroacoustics associated with model nozzles operating supersonically. In particular, the shock structure and radiated shock noise of Mach 1.5 and 2.0 nozzles are compared with those of a convergent nozzle over a wide nozzle pressure ratio range corresponding to a fully expanded Mach number between unity and 2.37. The nozzles were operated unheated both with and without a tab for screech tone suppression. The measurements show differences between the shock cell spacing of convergent and convergent-divergent nozzles, and the scaling relation appears to be a function of the exit-to-throat velocity ratio of each nozzle type. The acoustic measurements indicate the extent of the pressure ratio range where a C-D nozzle achieves a noise reduction benefit. At the design point of the Mach 1.5 nozzle, the total integrated sound power from this nozzle is 6 dB less than a convergent nozzle operating at the same pressure ratio and thrust

Seiner, J. M.↗

Utility of a finite element solution algorithm for initial-value problems

The Galerkin criterion within a finite element Weighted Residuals formulation is employed to establish an implicit solution algorithm for an initial-value partial differential equation. Numerical solutions of a transient parabolic and a hyperbolic equation, obtained using linear, quadratic and two cubic finite element basis functions, are employed to quantize accuracy and confirm and refine theoretical convergence rate estimates. The linear basis algorithm for the hyperbolic equation displays excellent accuracy on a coarse computational grid and a high-order convergence rate with discretization refinement. Good accuracy and a strong convergence rate in surface flux are determined for a nonhomogeneous Neumann boundary constraint applied to a parabolic equation. The results amply demonstrate the impact of the nondiagonal finite element initial-value matrix structure on solution accuracy and/or convergence rate.

Baker, A. J.↗

Application of fully stressed design procedures to redundant and non-isotropic structures

An evaluation is presented of fully stressed design procedures for sizing highly redundant structures including structures made of composite materials. The evaluation is carried out by sizing three structures: a simple box beam of either composite or metal construction; a low aspect ratio titanium wing; and a titanium arrow wing for a conceptual supersonic cruise aircraft. All three structures are sized by ordinary fully-stressed design (FSD) and thermal fully stressed design (TFSD) for combined mechanical and thermal loads. Where possible, designs are checked by applying rigorous mathematical programming techniques to the structures. It is found that FSD and TFSD produce optimum designs for the metal box beam, but produce highly non-optimum designs for the composite box beam. Results from the delta wing and arrow wing indicate that FSD and TFSD exhibits slow convergence for highly redundant metal structures. Further, TFSD exhibits slow oscillatory convergence behavior for the arrow wing for very high temperatures. In all cases where FSD and TFSD perform poorly either in obtaining nonoptimum designs or in converging slowly, the assumptions on which the algorithms are based are grossly violated. The use of scaling, however, is found to be very effective in obtaining fast convergence and efficiently produces safe designs even for those cases when FSD and TFSD alone are ineffective.

Adelman, H. M.↗

Depressurization and two-phase flow of water containing high levels of dissolved nitrogen gas

Depressurization of water containing various concentrations of dissolved nitrogen gas was studied. In a nonflow depressurization experiment, water with very high nitrogen content was depressurized at rates from 0.09 to 0.50 MPa per second and a metastable behavior which was a strong function of the depressurization rate was observed. Flow experiments were performed in an axisymmetric, converging diverging nozzle, a two dimensional, converging nozzle with glass sidewalls, and a sharp edge orifice. The converging diverging nozzle exhibited choked flow behavior even at nitrogen concentration levels as low as 4 percent of the saturation level. The flow rates were independent of concentration level. Flow in the two dimensional, converging, visual nozzle appeared to have a sufficient pressure drop at the throat to cause nitrogen to come out of solution, but choking occurred further downstream. The orifice flow motion pictures showed considerable oscillation downstream of the orifice and parallel to the flow. Nitrogen bubbles appeared in the flow at back pressures as high as 3.28 MPa, and the level at which bubbles were no longer visible was a function of nitrogen concentration.

Simoneau, R. J.↗

Minimization versus homotopy algorithms

The relative merits and demerits of the minimization techniques are assessed using globally convergent quasi-Newton algorithms on the one hand and the homotopy algorithms on the other hand for the solution of problems of nonlinear structural analysis. Like the homotopy algorithms, the globally convergent quasi-Newton algorithms are equally suited for the solution of the nonlinear equations of structural analysis directly without having to pose the problem as an equivalent minimization problem. In the close neighborhood of the limit and bifurcation points quasi-Newton algorithms experience difficulties. Homotopy algorithms are robust for practically all types of nonlinear problems but are computationally not as cost effective since they provide an extremely accurate prediction of the response by calculating it as a large number of points. Globally convergent algorithms can perform well with very approximate Hessians, while homotopy algorithms require extremely accurate Hessians. While quasi-Newton algorithms can be very easily structured to exploit sparsity and symmetry, homotopy algorithms are not presently so structured and would require special modifications for exploitation of such features without sacrificing robustness and global convergence.

Kamat, M. P.↗

A note on the assignments of Rydberg states of COS

Assignments of the Rydberg states which converge to the respective X-tilde and B-tilde ion states of the COS(+) ion are reported. The assignments were made based on previously established orderings for the quantum defects of isoelectronic molecules. The Rydberg series I and II, which converge to the X-tilde 2 Pi state of COS(+), and the series III, IV, V, VI and VII, which converge to the B-tilde 2 Sigma + state, are assigned to molecular orbitals characterized by predominant sulfur orbitals, in contrast to those converging to the C-tilde states, which are characterized by oxygen atomic orbitals.

Wu, C. Y. R.↗

Perturbation analysis of the limit cycle of the free van der Pol equation

A power series expansion in the damping parameter, epsilon, of the limit cycle of the free van der Pol equation is constructed and analyzed. Coefficients in the expansion are computed in exact rational arithmetic using the symbolic manipulation system MACSYMA and using a FORTRAN program. The series is analyzed using Pade approximants. The convergence of the series for the maximum amplitude of the limit cycle is limited by two pair of complex conjugate singularities in the complex epsilon-plane. A new expansion parameter is introduced which maps these singularities to infinity and leads to a new expansion for the amplitude which converges for all real values of epsilon. Amplitudes computed from this transformed series agree very well with reported numerical and asymptotic results. For the limit cycle itself, convergence of the series expansion is limited by three pair of complex conjugate branch point singularities. Two pair remain fixed throughout the cycle, and correspond to the singularities found in the maximum amplitude series, while the third pair moves in the epsilon-plane as a function of t from one of the fixed pairs to the other. The limit cycle series is transformed using a new expansion parameter, which leads to a new series that converges for larger values of epsilon.

Dadfar, M. B.↗

Doppler-radar observation of the evolution of downdrafts in convective clouds

A detailed analysis of the 20 July 1977 thunderstorm complex which formed and evolve over the South Park region in Central Colorado is presented. The storm was extensively analyzed using multiple Doppler radar and surface mesonet data, developed within an environment having very weak wind shear. The storm owed its intensification to the strength of the downdraft, which was nearly coincident with the region where the cloud had grown. The noteworthy features of this storm were its motion to the right of the cloud-level winds, its multicellular nature and discrete propagation, its north-south orientation, and its relatively large storm size and high reflectivity factor (55 dBZ). This scenario accounts for the observed mesoscale and cloud-scale event. A line of convergence was generated at the interface between the easterly upslope winds and westerly winds. During stage II, the convergence line subsequently propagated down the slopes of the Mosquito Range, and was the main forcing mechanism for the development of updraft on the west flank of the storm. The formation of downdraft on the eastern side of updraft blacked surface inflow, and created a detectable gust front. As the original downdraft intensified, the accumulation of evaporatively-chilled air caused the intensification of the mesohigh, which likely destroyed the earlier convergence line and created a stronger convergence line to the east, which forced up-lifting of the moist, westerly inflow and caused the formation of updraft to the east. An organized downdraft circulation, apparently maintained by precipitation drag and evaporational cooling, was responsible in sustaining a well-defined gust front. The storm attained its highest intensity as a consequence of merging with a neighboring cloud. The interaction of downdrafts or gust fronts from two intense cells appeared to be the primary mechanism of this merging process as suggested by Simpson et al. (1980). The merging process coincided with more rain than occurred in unmerged echoes.

Motallebi, N.↗

Experimental Investigation of Shock-Cell Noise Reduction for Single Stream Nozzles in Simulated Flight

Seven single stream model nozzles were tested in the Anechoic Free-Jet Acoustic Test Facility to evaluate the effectiveness of convergent divergent (C-D) flowpaths in the reduction of shock-cell noise under both static and mulated flight conditions. The test nozzles included a baseline convergent circular nozzle, a C-D circular nozzle, a convergent annular plug nozzle, a C-D annular plug nozzle, a convergent multi-element suppressor plug nozzle, and a C-D multi-element suppressor plug nozzle. Diagnostic flow visualization with a shadowgraph and aerodynamic plume measurements with a laser velocimeter were performed with the test nozzles. A theory of shock-cell noise for annular plug nozzles with shock-cells in the vicinity of the plug was developed. The benefit of these C-D nozzles was observed over a broad range of pressure ratiosin the vicinity of their design conditions. At the C-D design condition, the C-D annual nozzle was found to be free of shock-cells on the plug.

Yamamoto, K.↗

Perturbation analysis of the limit cycle of the free van der Pol equation

A power series expansion in the damping parameter, epsilon, of the limit cycle of the free van der Pol equation is constructed and analyzed. Coefficients in the expansion are computed in exact rational arithmetic using the symbolic manipulation system MACSYMA and using a FORTRAN program. The series is analyzed using Padeapproximants. The convergence of the series for the maximum amplitude of the limit cycle is limited by two pair of complex conjugate singularities in the complex epsilon-plane. A new expansion parameter is introduced which maps these singularities to infinity and leads to a new expansion for the amplitude which converges for all real values of epsilon. Amplitudes computed from this transformed series agree very well with reported numerical and asymptotic results. For the limit cycle itself, convergence of the series expansion is limited by three pair of complex conjugate branch point singularities. Two pair remain fixed throughout the cycle, and correspond to the singularities found in the maximum amplitude series, while the third pair moves in the epsilon-plane as a function of t from one of the fixed pairs to the other. The limit cycle series is transformed using a new expansion parameter, which leads to a new series that converges for larger values of epsilon.

Dadfar, M. B.↗

The application of contraction theory to an iterative formulation of electromagnetic scattering

Contraction theory is applied to an iterative formulation of electromagnetic scattering from periodic structures and a computational method for insuring convergence is developed. A short history of spectral (or k-space) formulation is presented with an emphasis on application to periodic surfaces. To insure a convergent solution of the iterative equation, a process called the contraction corrector method is developed. Convergence properties of previously presented iterative solutions to one-dimensional problems are examined utilizing contraction theory and the general conditions for achieving a convergent solution are explored. The contraction corrector method is then applied to several scattering problems including an infinite grating of thin wires with the solution data compared to previous works.

Brand, J. C.↗

Magnetic shear. IV - Hale regions 16740, 16815, and 16850

Dopplergrams made in C IV 1548 A are studied for evidence of velocity shear near H-alpha dark filaments and for large-scale flow convergent on active regions. The three regions studied support earlier conclusions that shear is a common property of active regions and that active regions may be the foci of converging plasma flow. Flow patterns near filaments show divergence or convergence as well as shear. Also the sense of the shear can be either cyclonic or anticyclonic. No preference is noted for convergence or divergence or for a particular sense of shear, and there appears to be no correlation between the sense of the shear and the sign of the velocity gradient normal to the filament. The close association of H-alpha dark filaments with shear lines leads to the suggestion that the filaments may arise from a cooling instability induced by the Bernoulli effect.

Athay, R. G.↗

An efficient method for solving the steady Euler equations

An efficient numerical procedure for solving a set of nonlinear partial differential equations is given, specifically for the steady Euler equations. Solutions of the equations were obtained by Newton's linearization procedure, commonly used to solve the roots of nonlinear algebraic equations. In application of the same procedure for solving a set of differential equations we give a theorem showing that a quadratic convergence rate can be achieved. While the domain of quadratic convergence depends on the problems studied and is unknown a priori, we show that firstand second-order derivatives of flux vectors determine whether the condition for quadratic convergence is satisfied. The first derivatives enter as an implicit operator for yielding new iterates and the second derivatives indicates smoothness of the flows considered. Consequently flows involving shocks are expected to require larger number of iterations. First-order upwind discretization in conjunction with the Steger-Warming flux-vector splitting is employed on the implicit operator and a diagonal dominant matrix results. However the explicit operator is represented by first- and seond-order upwind differencings, using both Steger-Warming's and van Leer's splittings. We discuss treatment of boundary conditions and solution procedures for solving the resulting block matrix system. With a set of test problems for one- and two-dimensional flows, we show detailed study as to the efficiency, accuracy, and convergence of the present method.

Liou, M. S.↗

Adaptive Inverse Control for Rotorcraft Vibration Reduction

This thesis extends the Least Mean Square (LMS) algorithm to solve the mult!ple-input, multiple-output problem of alleviating N/Rev (revolutions per minute by number of blades) helicopter fuselage vibration by means of adaptive inverse control. A frequency domain locally linear model is used to represent the transfer matrix relating the higher harmonic pitch control inputs to the harmonic vibration outputs to be controlled. By using the inverse matrix as the controller gain matrix, an adaptive inverse regulator is formed to alleviate the N/Rev vibration. The stability and rate of convergence properties of the extended LMS algorithm are discussed. It is shown that the stability ranges for the elements of the stability gain matrix are directly related to the eigenvalues of the vibration signal information matrix for the learning phase, but not for the control phase. The overall conclusion is that the LMS adaptive inverse control method can form a robust vibration control system, but will require some tuning of the input sensor gains, the stability gain matrix, and the amount of control relaxation to be used. The learning curve of the controller during the learning phase is shown to be quantitatively close to that predicted by averaging the learning curves of the normal modes. For higher order transfer matrices, a rough estimate of the inverse is needed to start the algorithm efficiently. The simulation results indicate that the factor which most influences LMS adaptive inverse control is the product of the control relaxation and the the stability gain matrix. A small stability gain matrix makes the controller less sensitive to relaxation selection, and permits faster and more stable vibration reduction, than by choosing the stability gain matrix large and the control relaxation term small. It is shown that the best selections of the stability gain matrix elements and the amount of control relaxation is basically a compromise between slow, stable convergence and fast convergence with increased possibility of unstable identification. In the simulation studies, the LMS adaptive inverse control algorithm is shown to be capable of adapting the inverse (controller) matrix to track changes in the flight conditions. The algorithm converges quickly for moderate disturbances, while taking longer for larger disturbances. Perfect knowledge of the inverse matrix is not required for good control of the N/Rev vibration. However it is shown that measurement noise will prevent the LMS adaptive inverse control technique from controlling the vibration, unless the signal averaging method presented is incorporated into the algorithm.

Jacklin, Stephen A.↗

Accuracy of derivatives of control performance using a reduced structural model

The sensitivity of control system performance to structural changes is calculated for a multi-span beam with direct-rate feedback vibration control. Reduced models based on the natural modes of the structure are formed and derivatives of the damping ratios of the closed-loop eigenvalues are calculated. The convergence of the derivatives of the damping ratios with increasing number of modes is shown to be slower than the convergence of the damping ratios themselves. In particular, in some cases the convergence of finite-element approximations to the derivatives is much faster than the convergence of the modal approximations. The results indicate that the use of reduced models based on natural vibration modes may be ill-advised for calculating the sensitivity of control system performance to changes in the controlled structure.

Sandridge, Chris A.↗

A numerical investigation of crossflow separation on a three-caliber tangent ogive-cylinder

A parabolized Navier-Stokes code was used to calculate laminar crossflow separation on a simple body of revolution. Convergence lines were defined as lines on which skin-friction lines converge and were visually determined from the computed skin-friction patterns. These convergence lines were shown to be limit lines and not envelopes. Examination of crossflow cuts of streamtubes which encircled the body indicated that crossflow separation (defined by a fold in the streamtube) began after the onset of negative crossflow velocities but before a convergence line could be determined from the skin-friction patterns. There were no rapid changes or extrema in the pressure, skin-friction, vorticity, or flow-angle distributions that indicated where separation occurred. Instead, crossflow separation developed gradually and involved an extended region of the surface.

Yates, Leslie A.↗

Ridge-trench collision in Archean and Post-Archean crustal growth: Evidence from southern Chile

The growth of continental crust at convergent plate margins involves both continuous and episodic processes. Ridge-trench collision is one episodic process that can cause significant magmatic and tectonic effects on convergent plate margins. Because the sites of ridge collision (ridge-trench triple junctions) generally migrate along convergent plate boundaries, the effects of ridge collision will be highly diachronous in Andean-type orogenic belts and may not be adequately recognized in the geologic record. The Chile margin triple junction (CMTJ, 46 deg S), where the actively spreading Chile rise is colliding with the sediment-filled Peru-Chile trench, is geometrically and kinematically the simplest modern example of ridge collision. The south Chile margin illustrates the importance of the ridge-collision tectonic setting in crustal evolution at convergent margins. Similarities between ridge-collision features in southern Chile and features of Archean greenstone belts raise the question of the importance of ridge collision in Archean crustal growth. Archean plate tectonic processes were probably different than today; these differences may have affected the nature and importance of ridge collision during Archean crustal growth. In conclusion, it is suggested that smaller plates, greater ridge length, and/or faster spreading all point to the likelihood that ridge collision played a greater role in crustal growth and development of the greenstone-granite terranes during the Archean. However, the effects of modern ridge collision, and the processes involved, are not well enough known to develop specific models for the Archean ridge collison.

Nelson, E. P.↗