Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “conducting structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

The role of copper in ZnO/Cu/ZnO thin films for flexible electronics

ZnO/Cu/ZnO multilayer structures with very high conductivity have been obtained by magnetron sputtering. The Hall resistivity of the films was as low as 6.9x10{sup -5} OMEGA-cm with a carrier concentration of 1.2x10{sup 22} cm{sup -3} at the optimum copper layer thickness. The conduction mechanism has been explained in terms of metal to oxide carrier injection at low copper thickness and metal layer conduction at higher Cu thicknesses. The peak transmittance of the films is 88% and the photopic averaged transmittance is 75%. Optical transmission behavior of the films involves absorption by copper due to d-band to Fermi-surface transitions at short wavelengths and reflectance combined with scattering losses at long wavelengths. A Burstein-Moss shift in the band gap of the films is seen to take place with increase in thickness of the copper layer. The Haacke figure of merit has been calculated for the films with the best value being 8.7x10{sup -3} OMEGA{sup -1}. Pole figure results reveal that the copper midlayer acts as a hindrance to (002) ZnO texturing rather than as a seed layer. These results also confirm the mechanism of conduction. The results of the study assume further significance because annealing at 150 deg. C for up to 24 h in a reducing (Ar+5% H{sub 2}) ambient was found to have negligible effect on the properties of the films.

36 MATERIALS SCIENCE↗

Properties of microturbulence in toroidal plasmas with reversed magnetic shear

Electrostatic drift wave turbulence in tokamak plasmas with reversed magnetic shear is studied using global gyrokinetic particle simulations. The linear eigenmode of the ion temperature gradient (ITG) instability exhibits a mode gap around the minimum safety factor (q{sub min}) region, particularly when q{sub min} is an integer, due to the rarefaction of rational surfaces. The collisionless trapped electron mode (CTEM) instability is suppressed in the negative-shear region due to the reversal of the toroidal precessional drift of trapped electrons. However, after nonlinear saturation, the ITG gap is filled up by the turbulence spreading and the CTEM fluctuation propagates into the stable negative-shear region. The steady state turbulence occupies the whole volume without any identifiable gap or coherent structures of the heat conductivity, perturbed temperature, or zonal flows in the q{sub min} location or the reversed shear region. Our finding indicates that the electrostatic drift wave turbulence itself does not support either linear or nonlinear mechanism for the formation of internal transport barriers in the reversed magnetic shear when q{sub min} crossing an integer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Synthesis and formation mechanism of hydrogenated boron clusters B{sub 12}H{sub n} with controlled hydrogen content

We present the formation of hydrogen-content-controlled B{sub 12}H{sub n}{sup +} clusters through the decomposition and ion-molecule reactions of the decaborane (B{sub 10}H{sub 14}) and diborane (B{sub 2}H{sub 6}) molecules in an external quadrupole static attraction ion trap. The hydrogen- and boron-contents of the B{sub 10-y}H{sub x}{sup +} cluster are controlled by charge transfer from ambient gas ions. In the process of ionization, a certain number of hydrogen and boron atoms are detached from decaborane ions by the energy caused by charge transfer. The energy caused by the ion-molecule reactions also induces H atom detachment. Ambient gas of Ar leads to the selective generation of B{sub 10}H{sub 6}{sup +}. The B{sub 10}H{sub 6}{sup +} clusters react with B{sub 2}H{sub 6} molecules, resulting in the selective formation of B{sub 12}H{sub 8}{sup +} clusters. Ambient gas of Ne (He) leads to the generation of B{sub 10-y}H{sub x}{sup +} clusters with x=4-10 and y=0-1 (with x=2-10 and y=0-2), resulting in the formation of B{sub 12}H{sub n}{sup +} clusters with n=4-8 (n=2,4-8). The introduction of ambient gas also increases the production of clusters. PBE0/6-311+G(d)//B3LYP/6-31G(d)-level density functional theory calculations are conducted to investigate the structure and the mechanism of formation of B{sub 10-y}H{sub x}{sup +} and B{sub 12}H{sub n}{sup +} clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient plasma production by intense laser irradiation of low density foam targets

Experimental investigations conducted on low density structured materials, such as foams have been presented in this paper. These low density foam targets having a density greater than the critical density of the laser produced plasma ({rho}{sub cr{approx_equal}}3 mg{center_dot}cm{sup -3} at laser wavelength 1.06 {mu}m) have been envisaged to have enhanced laser absorption. Experiments were done with an indigenously developed, focused 15 Joule/500 ps Nd: Glass laser at {lambda} = 1064 nm. The focused laser intensity on the target was in the range of I{approx_equal}10{sup 13}-2x10{sup 14} W/cm{sup 2}. Laser absorption was determined by energy balance experiments. Laser energy absorption was observed to be higher than 85%. In another set of experiments, low density carbon foam targets of density 150 mg/cc were compared with the solid carbon targets. The x-ray emission in the soft x-ray region was observed to increase in foam target by about 1.8 times and 2.3 times in carbon foam and Pt doped foam as compared to solid carbon. Further, investigations were also carried out to measure the energy transmitted through the sub-critical density TAC foam targets having a density less than 3 mg/cc. Such targets have been proposed to be used for smoothening of intensity ripples in a high power laser beam profile. Transmission exceeding 1.87% has been observed and consistent with results from other laboratories.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Epitaxial strain and antiferromagnetism in Heusler Fe{sub 2}VSi thin films

The effects of biaxial strain on the electrical and magnetic properties of an antiferromagnetic Heusler compound Fe{sub 2}VSi were systematically investigated. A series of epitaxial Fe{sub 2}VSi thin films on MgAl{sub 2}O{sub 4} and MgO substrates were fabricated with different tensile strains by varying the substrate-lattice mismatch and the film thickness. The strain was characterized by the ratio of the out-of-plane lattice parameter c to the in-plane lattice parameter a; this ratio c/a varied from 0.987 to 0.998 at room temperature. The tensile epitaxial strain was found to increase the antiferromagnetic Neel temperature T{sub N} to 193 K, which is 70 K higher than that for the unstrained bulk material. A clear dependence of T{sub N} on c/a was observed, which is consistent with theoretical predictions in which the band Jahn-Teller effect plays a significant role.

36 MATERIALS SCIENCE↗

Epitaxial TiN(001) wetting layer for growth of thin single-crystal Cu(001)

Single-crystal Cu(001) layers, 4-1400 nm thick, were deposited on MgO(001) with and without a 2.5-nm-thick TiN(001) buffer layer. X-ray diffraction and reflection indicate that the TiN(001) surface suppresses Cu-dewetting, yielding a 4 x lower defect density and a 9 x smaller surface roughness than if grown on MgO(001) at 25 deg. C. In situ and low temperature electron transport measurements indicate that ultra-thin (4 nm) Cu(001) remains continuous and exhibits partial specular scattering at the Cu-vacuum boundary with a Fuchs-Sondheimer specularity parameter p = 0.6 {+-} 0.2, suggesting that the use of epitaxial wetting layers is a promising approach to create low-resistivity single-crystal Cu nanoelectronic interconnects.

36 MATERIALS SCIENCE↗

Electrical properties of atomic layer deposited aluminum oxide on gallium nitride

We report on our investigation of the electrical properties of metal/Al{sub 2}O{sub 3}/GaN metal-insulator-semiconductor capacitors. We determined the conduction band offset and interface charge density of the alumina/GaN interface by analyzing the capacitance-voltage characteristics of atomic layer deposited Al{sub 2}O{sub 3} films on GaN substrates. The conduction band offset at the Al{sub 2}O{sub 3}/GaN interface was calculated to be 2.13 eV, in agreement with theoretical predications. A non-zero field of 0.93 MV/cm in the oxide under flat-band conditions in the GaN was inferred, which we attribute to a fixed net positive charge density of magnitude 4.60 x 10{sup 12 }cm{sup -2} at the Al{sub 2}O{sub 3}/GaN interface. We provide hypotheses to explain the origin of this charge by analyzing the energy band line-up.

36 MATERIALS SCIENCE↗

Anomalously high thermoelectric power factor in epitaxial ScN thin films

Thermoelectric properties of ScN thin films grown by reactive magnetron sputtering on Al{sub 2}O{sub 3}(0001) wafers are reported. X-ray diffraction and elastic recoil detection analyses show that the composition of the films is close to stoichiometry with trace amounts ({approx}1 at. % in total) of C, O, and F. We found that the ScN thin-film exhibits a rather low electrical resistivity of {approx}2.94 {mu}{Omega}m, while its Seebeck coefficient is approximately {approx}-86 {mu}V/K at 800 K, yielding a power factor of {approx}2.5 x 10{sup -3} W/mK{sup 2}. This value is anomalously high for common transition-metal nitrides.

36 MATERIALS SCIENCE↗

Evolution of temperature dependent properties of oriented YBaCo{sub 4}O{sub 7} thin films

Bulk YBaCo{sub 4}O{sub 7} was synthesized using a ceramic route in air. Thin films of this compound were grown on (100) oriented LaAlO{sub 3} substrate using a Pulsed Laser Deposition technique. X-ray diffraction results of thin film indicate that the film has (110) orientation. Electrical resistivity measurements, in 300K to 100K temperature range showed that the film is insulating, similar to that of the bulk. Spectroscopic ellipsometric measurements on thin films in the energy range 1.5 to 5 eV and at temperatures from 300 K to 400 K showed that the direct band gap s 2.45 eV at ambient temperature while its value increases with increase in temperature. The increase in band gap with temperature is attributed to the Moss-Burstein effect.

36 MATERIALS SCIENCE↗

Electrical transport properties study of Mo{sub 0.6}W{sub 0.4}Se{sub 2} single crystals

The mixed transition metal dichalcogenide single crystals Mo{sub 0.6}W{sub 0.4}Se{sub 2} were characterized employing EDAX (Energy Dispersive Analysis of X-ray), (XRD) X-ray diffraction, SEM (Scanning Electron Microscope) and UV-Vis-NIR spectroscopy techniques. The electrical transport properties of as-grown Mo{sub 0.6}W{sub 0.4}Se{sub 2} single crystals were studied by two probe d. c. resistivity, Hall Effect and thermoelectric power measurement set-up. The obtained results are discussed in details.

36 MATERIALS SCIENCE↗

The comprehensive phase evolution for Bi[subscript 2]Te[subscript 3] topological compound as function of pressure

The recently discovered three-dimensional topological insulator Bi{sub 2}Te{sub 3} is studied as function of pressure in terms of crystal structures, resistance, and Hall coefficient. The superconductivity is found in phase I (ambient phase) Bi{sub 2}Te{sub 3} with T{sub c}-3 K, which is related to the topological features. The evolution of crystal structure with pressure is investigated by high pressure synchrotron radiation experiments that reveal structural transitions occurring at about 8 GPa, 13 GPa, and 16 GPa, respectively. Furthermore, the high pressure phases of Bi{sub 2}Te{sub 3} are also superconducting but with much higher T{sub c}-8 K. The superconducting transitions are compared with those for Bi, Te elements. A global phase diagram of Bi{sub 2}Te{sub 3} as function of pressure up to 30 GPa is obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improved optical and electrical properties of 200 MeV Ag{sup 15+} irradiated 3 wt% 'Li' doped MoO{sub 3} thin film

The lithium (3 wt%) doped MoO{sub 3} thin film was prepared by spray deposition onto ITO substrate at 325 Degree-Sign C. The film of thickness 577 nm was irradiated with 200 MeV Ag{sup 15+} ion beams at a fluence of 5 Multiplication-Sign 10{sup 12} ions/cm{sup 2}. The XRD pattern confirmed that the pristine film is polycrystalline with orthorhombic symmetry. Upon irradiation, the film turned amorphous. The sharp Raman peak in pristine film at 993 cm{sup -1} is due to the terminal oxygen of {alpha}-MoO{sub 3} phase. Optical transparency of the film increased upon irradiation. Large red shift was observed in both direct and indirect band gaps. Electrical transport property study shows that the carrier concentration increased by one order for the irradiated film.

36 MATERIALS SCIENCE↗

Characterization of very fast states in the vicinity of the conduction band edge at the SiO{sub 2}/SiC interface by low temperature conductance measurements

We have investigated the unique interface states (NI) generated by NO annealing at the SiO{sub 2}/SiC interfaces by low-temperature conductance measurements, which is more suitable for characterization of very fast interface states than high-frequency conductance measurements at room temperature. Although only a part of the NI states can be evaluated by measurements at room temperature, the whole picture of the NI states, especially near the conduction band edge (0.07 eV ≤ E{sub C}−E{sub T}), has been revealed by the low temperature measurements. The NI peak was present at the interface even without NO annealing. The NI density increased with NO annealing temperature. The NI density at the energy levels shallower than 0.2 eV exceeded 10{sup 12} cm{sup −2}eV{sup −1} after NO annealing. The capture cross section of the NI states is uniquely larger than that of conventional interface states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation on the electrical transport properties of highly (00l)-textured Sb{sub 2}Te{sub 3} films deposited by molecular beam epitaxy

Highly (00l)-textured antimony telluride films were fabricated using molecular beam epitaxy (MBE) on Si (111) substrate at 280 °C. X-ray diffraction analysis implying the samples have good crystalline quality, simultaneously, the grain sizes coarsening with increasing thickness. The results of Hall coefficient measurement demonstrated that the carrier concentration and mobility are strongly affected by grain boundaries and microcrystalline internal defects. It was found that the grain boundaries play a primary factor influencing the carrier concentration in thinner film. At room temperature, the results in a maximum mobility value of 305 cm{sup 2}/Vs for 121-nm-thick film, and the electrical conductivity increased from 425.7 S/cm to 1036 S/cm as the thickness varied from 28 nm to 121 nm. In the range of room temperature to 150 °C, the resistivity almost linearly increased with increasing temperature. This may be explained by low concentration of impurities or defects and shallow impurity band. For difference thickness films, temperature coefficients of resistivity are substantially equal, and the values are about 3 ∼ 4 μΩ⋅cm/K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hysteretic electrical transport in BaTiO{sub 3}/Ba{sub 1−x}Sr{sub x}TiO{sub 3}/Ge heterostructures

We present electrical transport measurements of heterostructures comprised of BaTiO{sub 3} and Ba{sub 1−x}Sr{sub x}TiO{sub 3} epitaxially grown on Ge. Sr alloying imparts compressive strain to the BaTiO{sub 3}, which enables the thermal expansion mismatch between BaTiO{sub 3} and Ge to be overcome to achieve c-axis oriented growth. The conduction bands of BaTiO{sub 3} and Ba{sub 1−x}Sr{sub x}TiO{sub 3} are nearly aligned with the conduction band of Ge, which facilitates electron transport. Electrical transport measurements through the dielectric stack exhibit rectifying behavior and hysteresis, where the latter is consistent with ferroelectric switching.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A methodology to identify and quantify mobility-reducing defects in 4H-silicon carbide power metal-oxide-semiconductor field-effect transistors

In this paper, we present a methodology for the identification and quantification of defects responsible for low channel mobility in 4H-Silicon Carbide (SiC) power metal-oxide-semiconductor field-effect transistors (MOSFETs). To achieve this, we use an algorithm based on 2D-device simulations of a power MOSFET, density functional simulations, and measurement data. Using physical modeling of carrier mobility and interface traps, we reproduce the experimental I-V characteristics of a 4H-SiC doubly implanted MOSFET through drift-diffusion simulation. We extract the position of Fermi level and the occupied trap density as a function of applied bias and temperature. Using these inputs, our algorithm estimates the number of possible trap types, their energy levels, and concentrations at 4H-SiC/SiO{sub 2} interface. Subsequently, we use density functional theory (DFT)-based ab initio simulations to identify the atomic make-up of defects causing these trap levels. We study silicon vacancy and carbon di-interstitial defects in the SiC side of the interface. Our algorithm indicates that the D{sub it} spectrum near the conduction band edge (3.25 eV) is composed of three trap types located at 2.8–2.85 eV, 3.05 eV, and 3.1–3.2 eV, and also calculates their densities. Based on DFT simulations, this work attributes the trap levels very close to the conduction band edge to the C di-interstitial defect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of the Fermi level position in dilute magnetic Ga{sub 1-x}Mn{sub x}N films

We report on a combined theoretical and experimental determination of the Fermi level position in wurtzite Ga{sub 1−x}Mn{sub x}N films with x=4% and x=10% as grown by molecular beam epitaxy. By means of ellipsometric measurements, the real part of the frequency-dependent conductivity is determined. An electronic model in the framework of the effective bond-orbital model is parameterized in order to theoretically reproduce the measured transport properties. Predictions for the long-wavelength behaviour as a function of the Fermi level are made. The corresponding density of states obtained in this model is in qualitative agreement with first-principle calculations. The absence of a significant experimental peak in the AC conductivity for small frequencies indicates that the Fermi level lies in a gap between two Mn-related impurity bands in the host band gap.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of difference in interfacial reaction at Fe{sub 3}O{sub 4}/ZnO and ZnO/Fe{sub 3}O{sub 4} heterostructure using synchrotron radiation

We have prepared Fe{sub 3}O{sub 4}/ZnO and ZnO/Fe{sub 3}O{sub 4} bilayer structure on p-Si substrate using pulsed laser deposition technique (PLD). X-ray diffraction study revealed (0001) oriented growth of ZnO and (111) oriented growth of Fe{sub 3}O{sub 4} in both the bilayer structure. We observed a change in the density of states near the Fermi level in valence band spectra in case of Fe{sub 3}O{sub 4}/ZnO bilayer when compared to that of ZnO/Fe{sub 3}O{sub 4}. Nonlinear current–voltage (I-V) characteristics were observed in both the samples confirmed that these bilayer structures can be used for spintronic application.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗