Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “bonding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Macrocyclic β‐Sheets Stabilized by Hydrogen Bond Surrogates

Abstract Mimics of protein secondary and tertiary structure offer rationally‐designed inhibitors of biomolecular interactions. β‐Sheet mimics have a storied history in bioorganic chemistry and are typically designed with synthetic or natural turn segments. We hypothesized that replacement of terminal inter‐β‐strand hydrogen bonds with hydrogen bond surrogates (HBS) may lead to conformationally‐defined macrocyclic β‐sheets without the requirement for natural or synthetic β‐turns, thereby providing a minimal mimic of a protein β‐sheet. To access turn‐less antiparallel β‐sheet mimics, we developed a facile solid phase synthesis protocol. We surveyed a dataset of protein β‐sheets for naturally observed interstrand side chain interactions. This bioinformatics survey highlighted an over‐abundance of aromatic–aromatic, cation‐π and ionic interactions in β‐sheets. In correspondence with natural β‐sheets, we find that minimal HBS mimics show robust β‐sheet formation when specific amino acid residue pairings are incorporated. In isolated β‐sheets, aromatic interactions endow superior conformational stability over ionic or cation‐π interactions. Circular dichroism and NMR spectroscopies, along with high‐resolution X‐ray crystallography, support our design principles.

Chemistry↗

Four‐Electron Oxidative Addition of an N=N Double Bond at a Chromium Metallocyclopropene**

Abstract This report describes the synthesis of a pseudo‐tetrahedral chromium alkyne complex supported by a bidentate phosphinimide ligand and its reactivity with an azobenzene derivative. Characterization of the former by structural and computational methods reveals an unprecedented extent of alkyne activation by a formal chromium(II) center, suggesting that this complex is best described as a chromium(IV)‐metallocyclopropene. Exposure of this compound to 4,4′‐difluoroazobenzene results in the formation of a chromium(VI) diimido complex, which constitutes a rare 4‐electron oxidative addition of an N=N double bond. The isolation of a chromium(IV)‐hydrazido intermediate enabled mechanistic investigations of this challenging bond cleavage process. This work substantiates the notion that terminal phosphinimide ligands can engender first‐row transition metal ions with exceptional reactivity.

Chemistry↗

Combined Spectroscopic and Electrochemical Detection of a NiI•••H–N Bonding Interaction with Relevance to Electrocatalytic H2 Production

The [Ni(PR2NR’2)2]2+ family of complexes are exceptionally active catalysts for proton reduction to H2. In this manuscript, we explore the first protonation step of the proposed catalytic cycle by using a catalytically inactive NiI complex possessing a sterically demanding variation of the ligand. Due to the paramagnetic nature of the NiI oxidation state, the protonated NiI intermediate has been characterized through a combination of cyclic voltammetry, ENDOR, and HYSCORE spectroscopy. Both the electrochemical and spectroscopic studies indicate that the NiI complex is protonated at a pendant amine that is endo to Ni, which suggests the presence of an intramolecular NiI•••HN bonding interaction. Using density functional theory, the proton was found to hydrogen bond to three doubly-occupied, localized molecular orbitals: the 3dxz, 3dz2, and 3dyz orbitals of nickel. These studies provide the first direct experimental evidence for this critical catalytic intermediate, and implications for catalytic H2 production are discussed. Research was supported by the Max Planck Society (EPR, ENDOR, and HYSCORE spectroscopy, computational studies), and as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences (electrochemistry, NMR spectroscopy). Pacific Northwest National Laboratory is operated by Battelle for DOE.

electrocatalysis↗

Supramolecular and Hybrid Bonding Polymers

Staudinger established a century ago the existence of covalent macromolecules, work that led to the development of transformative materials of great benefit to society and a “quantum leap” in our understanding of biological systems. Over the past few decades the concept of supramolecular polymers has emerged–chemical systems in which structural units bond strongly to each other non-covalently. Herein, we discuss how these dynamic systems actually exist in the natural world and can create soft materials with structures, properties, and functions beyond the ones we know in Staudinger polymers. We reflect here on the potential of novel systems in which covalent and supramolecular polymers are chemically integrated and describe them as hybrid bonding polymers. This paper describes the concept with recent examples from the Stupp laboratory, and discusses their potential functions as robotic materials that mimic living matter and structures that offer new ideas on how to recycle and reuse soft materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bonding charge density from atomic perturbations

Charge transfer among individual atoms is the key concept in modern electronic theory of chemical bonding. In this work, we present a first‐principles approach to calculating the charge transfer. Based on the effects of perturbations of an individual atom or a group of atoms on the electron charge density, we determine unambiguously the amount of electron charge associated with a particular atom or a group of atoms. We computed the topological electron loss versus gain using ethylene, graphene, MgO, and SrTiO 3 as examples. Our results verify the nature of chemical bonds in these materials at the atomic level. © 2015 Wiley Periodicals, Inc.

Wang, Yi↗

Peridynamic bond-associated correspondence model: Stability and convergence properties

The correspondence approach is a powerful technique that permits the usage of standard constitutive models from local theory within a peridynamic formulation. However, the conventional correspondence formulation suffers from material instability, i.e. zero-energy modes, that must be controlled for it to be applied in practice. The recently-introduced correspondence reformulation based on the use of a bond-associated deformation gradient can inherently remove the material instability. In this paper, we characterize some important properties, i.e. balance of linear momentum, balance of angular momentum and material stability, of the bond-associated correspondence model. The convergence behavior is also examined. Here, the accuracy of this approach is further demonstrated by comparing model predictions against local reference solutions and results from the conventional correspondence model with penalty stabilization for both two-dimensional and three-dimensional problems.

42 ENGINEERING↗

Dissimilar material joining of densified superwood to aluminum by adhesive bonding

Abstract Superwood is a densified wood product that shows promise as a lightweight and renewable alternative for metallic materials. In order for this high-performance new material to be used in multi-material products, it must be able to be joined with other major materials. For example, joining superwood to aluminum would provide a key enabling technology for its use in automotive components since aluminum is presently a major lightweight material for such applications. In this paper, a methacrylate-based adhesive has been identified to provide high lap shear strength (7.5 MPa) for aluminum-to-superwood joints. The aluminum-to-superwood samples were prepared with different amounts of pre-polishing to create openings to the pores in the superwood so adhesive could penetrate into them and create a mechanical interlock, in addition to the hydrogen/chemical bonding at the surface between the methyl methacrylate (MMA) in methacrylate-based adhesive and the cellulose in superwood. For aluminum samples, a thin layer (typically a few nanometers) of oxide film on the surfaces provides hydrogen/chemical bond to MMA structure in the adhesive layer. The failure strength of the superwood-to-aluminum joint sample is about 50% higher than that of natural wood to natural wood joint sample and comparable to that of aluminum-to-aluminum joint sample.

Automation & Control Systems↗

Use of a New Hybrid Heparin-Bonded Nitinol Ring Stent in the Popliteal Artery: Procedural and Mid-term Clinical and Anatomical Outcomes

PurposeTo report the immediate and mid-term clinical and anatomical outcomes of a novel, hybrid, heparin-bonded, nitinol ring stent (TIGRIS; Gore Medical) when used for the treatment of lesions located in the popliteal artery.Materials and MethodsThis was a prospective single-centre registry. Patients eligible for inclusion were individuals suffering from symptomatic popliteal arterial occlusive disease (Rutherford–Becker stage 3–6; P1–P3 segments) and treated with placement of the TIGRIS stent(s). Patients were prospectively scheduled for clinical review and duplex ultrasound follow-up after 6 and 12 months. Outcome measures included immediate technical success, primary vessel patency, in-stent binary restenosis (evaluable by Duplex at 50 % threshold; PSVR > 2.0), freedom from target lesion revascularization (TLR) and amputation-free survival (AFS) estimated by Kaplan–Meier (K–M) survival analysis. Cox proportional-hazards regression analysis was also performed to adjust for confounders and search for independent predictors of outcomes.ResultsFrom August 2012 to March 2014, a total of 54 popliteal TIGRIS stents were implanted in 50 limbs of 48 patients (27 men and 21 women; mean age 76.0 ± 1.7 years). Median Rutherford–Becker stage was five at baseline and 37/50 (74.0 %) were chronic total occlusions. Technical success was achieved in all cases (100 %). Stented lesion length was 114.2 ± 36.9 mm (range 6–20 cm). Median follow-up was 11.8 ± 0.8 months. After 12 months, primary patency of the TIGRIS stent was 69.5 ± 10.2 % with an 86.1 ± 5.9 % freedom from TLR and 87 ± 5.0 % AFS (K–M estimates).ConclusionThe TIGRIS hybrid heparin-bonded nitinol ring stent is a safe and effective endovascular option for complex occlusive disease of the popliteal artery.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Effective Thermoelasticity of Polymer-Bonded Particle Composites with Imperfect Interfaces and Thermally Expansive Interphases

A micromechanical model for the thermoelasticity of polymer-bonded composites is presented. The model is particularly aimed at describing materials where the polymeric binder phase undergoes non-negligible thermal expansion affecting the overall thermoelastic response. Constitutive choices for modeling a mixed binder-void interphase layer are proposed, and an associated decomposition of total eigenstrains into classical, elastic imperfection (damage), and binder thermal expansivity parts is examined within the context of imperfect inter-particle interfaces. A novel temperature dependent modified Eshelby tensor is identified, making possible the development of a temperature dependent modified self-consistent homogenization scheme—what we call the M θ-SCH model. A method for distinguishing between dispersed and isolated parts of the binder and void phases in the model is also provided, along with a description of particle coating (or interphase) thickness derived from particle morphology and mesoscale effective properties. Finally, although the theory is general, its development is motivated by the need to model anisotropic and highly nonlinear observed thermal expansion behavior of the polymer bonded explosive PBX 9502, for which model simulations are performed and compared with existing measurements.

36 MATERIALS SCIENCE↗

Comparison of Degrees of Potential-Energy-Surface Anharmonicity for Complexes and Clusters with Hydrogen Bonds

Previously calculated multidimensional potential-energy surfaces of the MeOH monomer and dimer, water dimer, malonaldehyde, formic acid dimer, free pyridine-N-oxide/trichloroacetic acid complex, and protonated water dimer were analyzed. The corresponding harmonic potential-energy surfaces near the global minima were constructed for series of clusters and complexes with hydrogen bonds of different strengths based on the behavior of the calculated multidimensional potential-energy surfaces. This enabled the introduction of an obvious anharmonicity parameter for the calculated potential-energy surfaces. The anharmonicity parameter was analyzed as functions of the size of the analyzed area near the energy minimum, the number of points over which energies were compared, and the dimensionality of the solved vibrational problem. Anharmonicity parameters for potential-energy surfaces in complexes with strong, medium, and weak H-bonds were calculated under identical conditions. The obtained anharmonicity parameters were compared with the corresponding diagonal anharmonicity constants for stretching vibrations of the bridging protons and the lengths of the hydrogen bridges.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Solubility Comparison of Cyclotetramethylenetetranitramine (HMX) and Potential Mock-HMX Candidates in Solvents Relevant to Slurry Formulating Polymer-Bonded Materials

Understanding solubility behavior of organic crystalline materials is critical in the development of slurry-formulated plastic bonded composites. In the field of high explosives (HE), a common method for obtaining high density, greater than 95 % theoretical maximum density, is to encapsulate HE in a polymer matrix resulting in the formation of plastic bonded explosive (PBX) prills. Prill formation is highly nuanced and requires understanding of particle size distributions, solvent, antisolvent, and binder system as well as interactions thereof. In this paper, in an effort to create mock-HE that mimics HE in density and mechanical strength, solubility of candidate molecules was compared to cyclotetramethylenetetranitramine (HMX) in binder solvents relevant to prill formation. The results indicate that the mock candidates chosen for this study have different solubilities compared to HMX in water and both organic solvents, 2-butanone and ethyl acetate, investigated. With these solubility differences known, prills to match PBXs based on HMX can be formulated, pressed and tested.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Binding of gold(III) with silver(I) dipropyldithiocarbamate: supramolecular self-assembly (role of secondary Au…S and Ag…S bonds) and thermal behavior of the ionic-polymer complex ([Au(S{sub 2}CNPr{sub 2}){sub 2}][AgCl{sub 2}]){sub n}

The double ionic-polymer complex ([Au(S{sub 2}CNPr{sub 2}){sub 2}][AgCl{sub 2}]){sub n} (1) was prepared as an individual fixation form of gold(III) from NaCl solutions with silver(I) dipropyldithiocarbamate and was characterized by single-crystal X-ray diffraction and {sup 13}C magic-angle spinning (MAS) NMR spectroscopy. The structure of 1 comprises two nonequivalent centrosymmetric complex cations [Au(S{sub 2}CNPr{sub 2}){sub 2}]{sup +} (A and B) and the discrete linear anion [AgCl{sub 2}]{sup –}. Gold(III) cations are linked by pairs of unsymmetrical secondary Au…S bonds to form linear supramolecular chains (…A…B…)n. Neighboring cations are additionally linked by [AgCl{sub 2}]{sup –} anions via secondary Ag…S and Cl…S bonds, the anions being involved in the overall stabilization of the supramolecular structure. The cation–anion interactions lead to a distortion of the linear configuration of the [AgCl{sub 2}]{sup –} anion. The character of thermolysis of 1 accompanied by quantitative regeneration of bound Au and Ag was established by simultaneous thermal analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fracture Strength and Surface Magnetic Flux Uniformity in an Isotropic Polymer-Bonded Ring-Shaped Nd-Fe-B Magnet

Ring-shaped (RS) polymer-bonded magnets were produced from a mixture of an isotropic nanocrystalline Nd-Fe-B powder with a nominal composition of 59.8 wt.% Fe, 29 wt.% Nd, 5 wt.% Zr, 4.8 wt.% Co and 1.4 wt.% B and a variety of epoxy resins as binders, using a compaction-molding technique. The morphology and average particle size of the powders are determined by an SEM. The magnetic properties of the magnets were measured using a permeameter. Magnetic flux on the surface of the magnets was determined by a Gauss meter. The mechanical properties of the RS specimens were determined using a tensile fracture strength (FS) test. The effects of polymer type and amount, hardener amount, applied pressing pressure and curing temperature and time on FS were investigated. The experimental results showed that at optimal conditions of 8 wt.% solid epoxy, 3.5 wt.% solid hardener, a pressing pressure of 900 MPa and a curing time of 8 h at 170 °C, a maximum tensile strength of ~ 36 MPa was achieved. Surface magnetic flux uniformity in optimal mechanical conditions was also found to be optimum at around ± 40 G, which is one of the best flux uniformities in bonded magnets.

36 MATERIALS SCIENCE↗

Sinter-Bonding of AISI 316L and 17-4 PH Stainless Steels

The sinter-bonding method was used to produce AISI 316L/17-4 PH components by conventional powder metallurgy technology. The production process consisted of following steps: the powder layering, co-pressing and co-sintering processes. The co-sintering process was carried out at different sintering temperatures (1200, 1250 and 1300 °C), and times (60, 90 and 120 min) in hydrogen atmosphere. The effect of co-pressing and co-sintering conditions on the ability to create a permanent connection between AISI 316L and 17-4 PH stainless steels was investigated. The densification, dimensional change and microstructural evolution of sintered AISI 316L/17-4 PH components were studied. The increase in co-pressing pressure as well as using of the longer time and the higher temperature of co-sintering process contributed to increase in AISI 316L/17-4 PH component density. The dilatometric study as well as dimensional changes measurements revealed an appropriate sintering compatibility for AISI 316L and 17-4PH steels when the sintering process was carried out at the temperature of 1200 °C for time ranging from 60 to 120 min and at 1250 °C for shorter sintering times. The sintering at temperature of 1300 °C (regardless of other manufacturing conditions) led to a significant deviation from the cylindrical shape of samples, as a result of difference of shrinkage of AISI 316L and 17-4 PH steels. Microstructural study indicated that AISI 316L and 17-4 PH steels creates a good diffusion joint (without any cracks and warpage) during the high-temperature sintering process. Nickel diffusion takes place from the AISI 316L to 17-4 PH stainless steel, and copper and molybdenum diffuse in opposite direction of nickel diffusion. It is possible to achieve a solid connection between two materials exhibiting difference in chemical composition by using sinter-bonding and conventional powder metallurgy technology.

36 MATERIALS SCIENCE↗

Fast oxygen redox enabled by flexible Al–O bonds in P2-type layered oxides for sodium batteries

Sodium-ion batteries (SIBs) exhibit significant potential for large-scale energy storage systems due to the abundance and low cost of sodium resources. Triggering lattice oxygen redox (LOR) in P2-type transition metal oxides is considered a promising approach to enhance energy density in SIB cathodes, providing high operating potential and substantial capacity. However, irreversible phase transitions associated with LOR, particularly from prisms (P-type stacking) to octahedrons (O-type stacking), lead to severe structural distortions and sluggish Na + diffusion kinetics. In this work, an Al-substitution strategy is proposed to suppress the formation of O-type stacking and instead promote the formation of a beneficial Z phase. Furthermore, the flexible Al-O bonds accommodate asymmetric variations in their occupied states during the sodiation process, mitigating local structural distortions through Al-O bond contraction. Stabilization of the local structure ensures the maintenance of a robust Na + diffusion pathway. As a result, the Al-substituted cathode achieves a low Na + diffusion barrier of 0.47 eV and delivers a capacity of 86 mAh/g even at a high current density of 1 A/g within 1.5–4.5 V, maintaining 62.5% capacity retention over 100 cycles.

36 MATERIALS SCIENCE↗

Ligation Kinetics as a Probe for Non-Covalent Electrostatic Bonding and Electron Solvation of Alkali and Alkaline Earth Cations with Ammonia

Mono-ligation kinetics were measured for ammonia reacting with atomic cations in the first two groups of the periodic table (K{sup +}, Rb{sup +}, Cs{sup +} and Ca{sup +}, Sr{sup +}, Ba{sup +}). Also, mono-ligation energies were computed using density functional theory (DFT) in an attempt to assess the role of non-covalent electrostatic interactions in these chemical reactions. The measurements were performed at room temperature in helium bath gas at 0.35 Torr using an inductively coupled plasma/selected-ion flow tube (ICP/SIFT) tandem mass spectrometer. Rate coefficients are reported for ammonia addition, the only reaction channel that was observed with all these cations. A systematic decrease in the rate of addition of NH{sub 3} was observed for both group 1 and 2 cations going down the periodic table. The computational studies predict a decrease in the adduct binding energy and an increase in the bond separation going down groups 1 and 2 of the periodic table and provide some insight into the role of the extra selectron in the group 2 radical cations in ligand bonding. A correlation is seen between the efficiency of ligation and the binding energy of the adduct ion and attributed to the lifetime of the intermediate encounter complex against back dissociation which is dependent on its well depth. Higher-order additions of ammonia were also observed. Remarkable differences in the extent and kinetics were seen between the group 1 and 2 cations, and these were attributed to the occurrence of ammonia solvation of the extra s electron in the higher-order adducts of the alkaline earth cations. .

74 ATOMIC AND MOLECULAR PHYSICS↗

Achieving Metallurgical Bonding in Aluminum/Steel Bimetallic Castings

Abstract Aluminum castings are increasingly being used in automotive powertrain and structural applications for vehicle lightweighting. Cast aluminum parts often need to be machined and joined to steel components in multi-material systems. Bimetallic components produced by casting aluminum over steel substrate are advantageous due to the elimination of machining and traditional dissimilar material joining processes. However, forming a strong metallurgical bonding during overcasting process has been challenging. In this paper, the effects of processing conditions such as substrate surface preparation, pre-heating temperature, melt conditions as well as casting design were studied by investigating the bimetallic interfaces for aluminum A319 casting alloy and a high alloy steel substrate in a sand-casting process. Zn and Al-based substrate coatings were evaluated. The experimental results suggest a metallurgical bond between aluminum and steel can be formed during the sand-casting process via high temperature diffusion with or without coatings. Al-based substrate coating prior to overcasting results in the formation of a continuous layer of intermetallics at the bimetallic interface, with large Al–Si–Fe intermetallics penetrating the cast aluminum.

Moodispaw, Michael P. (ORCID:0000000267635882)↗

The significance of disulfide bonding in biological activity of HB-EGF, a mutagenesis approach

A site-directed mutagenesis approach was taken to disrupt each of 3 disulfide bonds within human HB-EGF by substituting serine for both cysteine residues that contribute to disulfide bonding. Each HB-EGF disulfide analogue (HB-EGF-Cys/Ser{sub 108/121}, HB-EGF-Cys/Ser{sub 116/132}, and HB-EGF-Cys/Ser{sub 134/143}) was cloned under the regulation of the mouse metallothionein (MT) promoter and stably expressed in mouse fibroblasts. HB-EGF immunoreactive proteins with M{sub r} of 6.5, 21 and 24 kDa were observed from lysates of HB-EGF and each HB-EGF disulfide analogue. HB-EGF immunohistochemical analyses of each HB-EGF stable cell line demonstrated ubiquitous protein expression except HB-EGF-Cys/Ser{sub 108/121} and HB-EGF-Cys/Ser{sub 116/132} stable cell lines which exhibited accumulated expression immediately outside the nucleus. rHB-EGF, HB-EGF, and HB-EGF{sub 134/143} proteins competed with {sup 125}I-EGF in an A431 competitive binding assay, whereas HB-EGF-Cys/Ser{sub 108/121} and HB-EGF-Cys/Ser{sub 116/132} failed to compete. Each HB-EGF disulfide analogue lacked the ability to stimulate tyrosine phosphorylation of the 170 kDa EGFR. These results suggest that HB-EGF-Cys/Ser{sub 134/143} antagonizes EGFRs.

60 APPLIED LIFE SCIENCES↗