Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “atomic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Photoionization of iodine atoms: Angular distributions and relative partial photoionization cross-sections in the energy region 11.0-23.0 eV

Relative partial photoionization cross-sections and angular distribution parameters, {beta}, have been measured for the first, I{sup +}({sup 3}P{sub 2})<-I({sup 2}P{sub 3/2}), and fourth, I{sup +}({sup 1}D{sub 2})<-I({sup 2}P{sub 3/2}), (5p){sup -1} photoelectron (PE) bands of atomic iodine, by performing angle-resolved constant-ionic-state (CIS) measurements on these PE bands in the photon energy range 11.0-23.0 eV. Three Rydberg series, two ns and one nd series, which converge to the I{sup +} {sup 3}P{sub 1} limit at 11.33 eV and four Rydberg series, two ns and two nd series, which converge to the I{sup +} {sup 1}D{sub 2} limit at 12.15 eV were observed in the first PE band CIS spectra. The fourth band CIS spectrum showed structure in the 12.9-14.1eV photon energy range, which is also seen in the first band CIS spectra. This structure arises from excitation to ns and nd Rydberg states that are parts of series converging to the I{sup +} {sup 1}S{sub 0} limit we reported on earlier, as well as 5s{yields}5p excitations in the photon energy range 17.5-22.5 eV. These atomic iodine CIS spectra show reasonably good agreement with the equivalent spectra obtained for atomic bromine. The {beta}-plots for the first PE band recorded up to the I{sup +} {sup 3}P{sub 1} and I{sup +} {sup 1}D{sub 2} limits only show resonances corresponding to some of the 5p{yields}nd excitations observed in the first band CIS spectra scanned to the I{sup +} {sup 1}D{sub 2} limit (12.15 eV). These plots are interpreted in terms of an angular momentum transfer model with the positive values of {beta} obtained on resonances corresponding to parity allowed j{sub t}=1 and 3 channels and the off-resonance negative {beta} values corresponding to parity unfavored channels, where j{sub t} is the quantum number for angular momentum transfer between the molecule, and the ion and photoelectron. The {beta}-plots recorded for iodine are significantly different from those obtained for atomic bromine. Comparison of the experimental CIS spectra and {beta}-plots with available theoretical results highlights the need for higher level calculations which include factors such as configuration interaction in the initial and final states, relativistic effects including spin-orbit interaction, and autoionization via resonant Rydberg states.

74 ATOMIC AND MOLECULAR PHYSICS↗

Accurate Cross-section Calculations for Low-Energy Electron-Atom Collisions

We describe a recently developed fully relativistic B-spline R-matrix method for atomic structure as well as calculations for electron and photon collision with atoms and ions. The method is based on the solution of the many-electron Fock-Dirac equation and allows to employ non-orthogonal sets of atomic orbitals. A B-spline basis is used to generate both the target description and the R-matrix basis functions in the inner region. Employing B-splines of different orders for the large and small components prevents the appearance of spurious states in the spectrum of the Dirac equation. Using term-dependent and thus nonorthogonal sets of one-electron functions enables us to generate accurate and flexible representations of the target states and the scattering function. Our method is based upon the Dirac-Coulomb Hamiltonian and thus may be employed for any complex atom or ion, without the use of phenomenological core potentials. Example results from recent applications of the method for accurate calculations of low-energy electron scattering from noble gases are presented. In most cases we obtained a substantial improvement over results obtained in previous Breit-Pauli R-matrix calculations.

74 ATOMIC AND MOLECULAR PHYSICS↗

Steady atomic entanglement in cavity QED without state initialization

We present a scheme for realizing a steady entanglement state between two trapped atoms, without requiring the initialization of atom-cavity system nor fine time-controlling of evolution dynamics. We show that high-fidelity entanglement of atomic state can be obtained in a period of time equal to a few times the inverse of atomic's spontaneous decay rate. The robustness against cavity decay kappa and cavity thermal field n{sub T} has also been examined.

74 ATOMIC AND MOLECULAR PHYSICS↗

Protocol for hybrid entanglement between a trapped atom and a quantum dot

We propose a quantum optical interface between an atomic and solid-state system. We show that quantum states in a single trapped atom can be entangled with the states of a semiconductor quantum dot through their common interaction with a classical laser field. The interference and detection of the resulting scattered photons can then herald the entanglement of the disparate atomic and solid-state quantum bits. We develop a protocol that can succeed despite a significant mismatch in the radiative characteristics of the two matter-based qubits. We study in detail a particular case of this interface applied to a single trapped {sup 171}Yb{sup +} ion and a cavity-coupled InAs semiconductor quantum dot. Entanglement fidelity and success rates are found to be robust to a broad range of experimental nonideal effects such as dispersion mismatch, atom recoil, and multiphoton scattering. We conclude that it should be possible to produce highly entangled states of these complementary qubit systems under realistic experimental conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomic Bloch-Zener oscillations for sensitive force measurements in a cavity

Cold atoms in an optical lattice execute Bloch-Zener oscillations when they are accelerated. We have performed a theoretical investigation into the case when the optical lattice is the intracavity field of a driven Fabry-Perot resonator. When the atoms oscillate inside the resonator, we find that their back-action modulates the phase and intensity of the light transmitted through the cavity. We solve the coupled atom-light equations self-consistently and show that, remarkably, the Bloch period is unaffected by this back-action. The transmitted light provides a way to observe the oscillation continuously, allowing high-precision measurements to be made with a small cloud of atoms.

74 ATOMIC AND MOLECULAR PHYSICS↗

Atom-ion quantum gate

Ultracold collisions of ions with neutral atoms in traps are studied. Recently, ultracold atom-ion systems have become available in experimental setups, where their quantum states can be coherently controlled. This control allows for an implementation of quantum information processing, combining the advantages of charged and neutral particles. The state-dependent dynamics that is a necessary ingredient for quantum computation schemes is provided in this case by the short-range interaction forces that depend on the hyperfine states of both particles. In this work, a theoretical description of spin-state-dependent trapped atom-ion collisions is developed in the framework of a multichannel quantum-defect theory and an effective single-channel model is formulated that reduces the complexity of the problem. Based on this description, a two-qubit phase gate between a {sup 135}Ba{sup +} ion and a {sup 87}Rb atom is simulated using a realistic combination of the singlet and triplet scattering lengths. The gate process is optimized and accelerated with the help of optimal control techniques. The result is a gate fidelity of 1-10{sup -3} within 350 mus.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Light scattering by ultracold atoms in an optical lattice

We investigate theoretically light scattering of photons by ultracold atoms in an optical lattice in the linear regime. A full quantum theory for the atom-photon interactions is developed as a function of the atomic state in the lattice along the Mott-insulator-superfluid phase transition, and the photonic-scattering cross section is evaluated as a function of the energy and of the direction of emission. The predictions of this theory are compared with the theoretical results of a recent work on Bragg scattering in time-of-flight measurements [A.M. Rey et al., Phys. Rev. A 72, 023407 (2005)]. We show that, when performing Bragg spectroscopy with light scattering, the photon recoil gives rise to an additional atomic site-to-site hopping, which can interfere with ordinary tunneling of matter waves and can significantly affect the photonic-scattering cross section.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Slow-light probe of Fermi pairing through an atom-molecule dark state

We consider the two-color photoassociation of a quantum degenerate atomic gas into ground-state diatomic molecules via a molecular dark state. This process can be described in terms of a {Lambda} level scheme that is formally analogous to the situation in electromagnetically induced transparency in atomic systems and therefore can result in slow-light propagation. We show that the group velocity of the light field depends explicitly on whether the atoms are bosons or fermions, as well as on the existence or absence of a pairing gap in the case of fermions, so that the measurement of the group velocity realizes a nondestructive diagnosis of the atomic state and the pairing gap.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic Resonance Frequency Shifts of Spin-Polarized Cesium Atoms in a Cs–Rb Mixture

The interaction of spin-polarized cesium atoms with cesium and rubidium atoms under conditions of optical orientation of atoms is considered. On the basis of data on spin-exchange complex cross sections in the Cs–Cs and Cs–Rb systems, a calculation of a magnetic resonance frequency shift of cesium atoms in a Cs–Rb mixture, as well as comparison of the calculated values of the frequency shift with experimental data, is performed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Exploiting Universality in Atoms with Large Scattering Lengths

The focus of this research project was atoms with scattering lengths that are large compared to the range of their interactions and which therefore exhibit universal behavior at sufficiently low energies. Recent dramatic advances in cooling atoms and in manipulating their scattering lengths have made this phenomenon of practical importance for controlling ultracold atoms and molecules. This research project was aimed at developing a systematically improvable method for calculating few-body observables for atoms with large scattering lengths starting from the universal results as a first approximation. Significant progress towards this goal was made during the five years of the project.

74 ATOMIC AND MOLECULAR PHYSICS↗

The muonic He atom and a preliminary study of the He-4 mu + H-2 reaction

The muonic atom 4Heu has the composition a++u-e-, and is formed by stopping negative muons in He doped with a small amount of NH3 (or Xe). It may be regarded as a unique heavy H-atom isotope with a mass of 4.1 amu. As such, the study of its chemical reaction rates and comparison with those of the well-known light Mu atom (0.113amu) allows unprecedented tests of kinetic isotope effects over a range of 36 in mass. As a first example, and one which is of most fundamental interest, we have begun kinetics studies of the Heu + H2 - HeuH + H reaction in the gas phase. The first measurements, at 295K, give a rate constant of kHei = 4:1 - 0:7 x 10-16 cm3 molec-1 s-1. In comparison, variational transition state calculations give a value of 2:46 x 10-16 cm3 molec-1 s-1, some what below the measurement, despite the large error bar, raising the possibility that the calculations, on a nessentially exact potential energy surface, have underestimated the amount of quantum tunneling involved, even for this heavyH-atom isotope.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Gas Separations using Nanoporous Atomically Thin Membranes: Recent Theoretical, Simulation, and Experimental Advances

Abstract Porous graphene and other atomically thin 2D materials are regarded as highly promising membrane materials for high‐performance gas separations due to their atomic thickness, large‐scale synthesizability, excellent mechanical strength, and chemical stability. When these atomically thin materials contain a high areal density of gas‐sieving nanoscale pores, they can exhibit both high gas permeances and high selectivities, which is beneficial for reducing the cost of gas‐separation processes. Here, recent modeling and experimental advances in nanoporous atomically thin membranes for gas separations is discussed. The major challenges involved, including controlling pore size distributions, scaling up the membrane area, and matching theory with experimental results, are also highlighted. Finally, important future directions are proposed for real gas‐separation applications of nanoporous atomically thin membranes.

2D materials↗

How the Arrangement of Platinum Atoms on Ruthenium Nanoparticles Improves Hydrogen Evolution Activity

The platinum‐ruthenium (PtRu) system is highly active for hydrogen evolution reaction (HER) in alkaline media with both Pt and Ru playing active roles in the water dissociation step that generates adsorbed hydrogen atoms. Precise control of the arrangement of Pt atoms on Ru nanoparticles can maximize the Pt‐Ru sites for water dissociation and Pt‐Pt sites for hydrogen production and can considerably improve HER catalytic performance. By directing the growth and distribution of Pt on Ru hourglass nanoparticles, the arrangement of Pt on Ru is controlled into forming Pt islands, small Pt clusters, and strings of a few Pt atoms. Calculations show that the unique atomic string arrangements of Pt on Ru is the thermodynamically favorable configuration. Additionally, these strings have a favorable combination of Pt‐Ru and Pt‐Pt sites, making the Pt‐string on Ru the most active catalyst with a more than fivefold increase in turnover frequency for alkaline HER compared to the Pt‐island on Ru catalyst. The results show how controlling the Pt atomic arrangement on Ru nanoparticle surfaces for the tuning of Pt‐Pt and Pt‐Ru neighboring sites can direct toward a more efficient HER mechanism and thereby significantly enhancing HER performance.

36 MATERIALS SCIENCE↗

Design of Atomically Precise Nanoscale Negative Differential Resistance Devices

Downscaling device dimensions to the nanometer range raises significant challenges to traditional device design, due to potential current leakage across nanoscale dimensions and the need to maintain reproducibility while dealing with atomic–scale components. Here, negative differential resistance (NDR) devices based on atomically precise graphene nanoribbons are investigated. The computational evaluation of the traditional double–barrier resonant–tunneling diode NDR structure uncovers important issues at the atomic scale, concerning the need to minimize the tunneling current between the leads while achieving high peak current. A new device structure consisting of multiple short segments that enables high current by the alignment of electronic levels across the segments while enlarging the tunneling distance between the leads is proposed. The proposed structure can be built with atomic precision using a scanning tunneling microscope (STM) tip during an intermediate stage in the synthesis of an armchair nanoribbon. An experimental evaluation of the band alignment at the interfaces and an STM image of the fabricated active part of the device are also presented. In conclusion, this combined theoretical–experimental approach opens a new avenue for the design of nanoscale devices with atomic precision.

42 ENGINEERING↗

Unveiling Highly Sensitive Active Site in Atomically Dispersed Gold Catalysts for Enhanced Ethanol Dehydrogenation

Developing a desirable ethanol dehydrogenation process necessitates a highly efficient and selective catalyst with low cost. Herein, we show that the “complex active site” consisting of atomically dispersed Au atoms with the neighboring oxygen vacancies (Vo) and undercoordinated cation on oxide supports can be prepared and display unique catalytic properties for ethanol dehydrogenation. The “complex active site” Au–Vo–Zr 3+ on Au 1 /ZrO 2 exhibits the highest H 2 production rate, with above 37,964 mol H 2 per mol Au per hour (385 g H 2 $\text{g}^{-1}_{\text{Au}} \text{h}^{–1}$) at 350 °C, which is 3.32, 2.94 and 15.0 times higher than Au 1 /CeO 2 , Au 1 /TiO 2 , and Au 1 /Al 2 O 3 , respectively. Combining experimental and theoretical studies, we demonstrate the structural sensitivity of these complex sites by assessing their selectivity and activity in ethanol dehydrogenation. Our study sheds new light on the design and development of cost-effective and highly efficient catalysts for ethanol dehydrogenation. Fundamentally, atomic-level catalyst design by colocalizing catalytically active metal atoms forming a structure-sensitive “complex site”, is a crucial way to advance from heterogeneous catalysis to molecular catalysis. Finally, our study advanced the understanding of the structure sensitivity of the active site in atomically dispersed catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combining STM, RAIRS and TPD to Decipher the Dispersion and Interactions Between Active Sites in RhCu Single-Atom Alloys

Single-atom alloys are a new class of heterogeneous catalyst in which trace amounts of metal dopants exist as individual, isolated sites in a host metal. In this study, we examine RhCu, a new single-atom alloy with a combination of scanning tunneling microscopy, reflectance absorbance infrared spectroscopy, and temperature programed desorption to understand the atomic structure of the alloy and correlate this with the behavior of CO, a common probe molecule. Here, we find that Rh alloys into Cu(111) preferentially from step edges. As such, step density plays an important role in the vibrational structure of CO on isolated Rh sites. We observe that atomically dispersed Rh sites can be close enough together to have dipole-dipole coupling interactions. Together, this combined experimental approach enables us to understand the alloying mechanism of Rh with Cu and yields important signatures of the atomic sites that are useful in benchmarking CO vibrational data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon Nanospheres Loaded with Ir Single Atoms: Enhancing the Activity toward Formic Acid Oxidation by Increasing the Porosity

Theoretically, single-atom catalysts (SACs) offer 100 % atom utilization, making them strong candidates to replace expensive nanoparticles for catalysis. However, the structural supports used to anchor the SACs dramatically reduce the utilization efficiency of atoms ( i. e ., the percent of atoms actually accessible by reactants) by either encapsulating the SACs completely or creating severe diffusion limitation. Either of which leads to an overall low atom utilization and thus poor electrocatalytic activity similar to that of nanoparticles. In addressing this issue, we systematically investigated how the porous structure of carbon nanospheres affects the activity of Ir-SACs toward formic acid oxidation (FAO). Specifically, we utilized a kinetically-controlled growth strategy to produce uniform carbon nanospheres featuring yolk-shell, mesoporous, and hollow structures with Ir-SACs loaded throughout the structure. At a high specific surface area of 441 m 2 g -1 and exposed metal content of 1.82 wt %, the Ir-SACs based on mesoporous carbon nanospheres showed a remarkable FAO peak current density of 30.6 mA cm -2 , which was 283 and 46 times greater when benchmarked against the catalysts based on solid carbon nanospheres and 20 wt % Ir/C, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Operando XAS/SAXS: Guiding Design of Single-Atom and Subnanocluster Catalysts

Single-atom and subnanocluster catalysts (SSCs) represent a highly promising class of low-cost materials with high catalytic activity and high atom-utilization efficiency. However, SSCs are susceptible to undergo restructuring during the reactions. Exploring the active sites of catalysts through in situ characterization techniques plays a critical role in studying reaction mechanism and guiding the design of optimum catalysts. In situ X-ray absorption spectroscopy/small-angle X-ray scattering (XAS/SAXS) is promising and widely used for monitoring electronic structure, atomic configuration, and size changes of SSCs during real-time working conditions. Unfortunately, there is no detailed summary of XAS/SAXS characterization results of SSCs. The recent advances in applying in situ XAS/SAXS to SSCs are thoroughly summarized in this review, including the atomic structure and oxidation state variations under open circuit and realistic reaction conditions. Furthermore, the reversible transformation of single-atom catalysts (SACs) to subnanoclusters/nanoparticles and the application of in situ XAS/SAXS in subnanoclusters are discussed. To conlcude, the outlooks in modulating the SSCs and developing operando XAS/SAXS for SSCs are highlighted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗