Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “active state model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Phosphocreatine kinetics at the onset of contractions in skeletal muscle of MM creatine kinase knockout mice

Phosphocreatine (PCr) depletion during isometric twitch stimulation at 5 Hz was measured by (31)P-NMR spectroscopy in gastrocnemius muscles of pentobarbital-anesthetized MM creatine kinase knockout (MMKO) vs. wild-type C57B (WT) mice. PCr depletion after 2 s of stimulation, estimated from the difference between spectra gated to times 200 ms and 140 s after 2-s bursts of contractions, was 2.2 +/- 0.6% of initial PCr in MMKO muscle vs. 9.7 +/- 1.6% in WT muscles (mean +/- SE, n = 7, P < 0.001). Initial PCr/ATP ratio and intracellular pH were not significantly different between groups, and there was no detectable change in intracellular pH or ATP in either group after 2 s. The initial difference in net PCr depletion was maintained during the first minute of continuous 5-Hz stimulation. However, there was no significant difference in the quasi-steady-state PCr level approached after 80 s (MMKO 36.1 +/- 3.5 vs. WT 35.5 +/- 4.4% of initial PCr; n = 5-6). A kinetic model of ATPase, creatine kinase, and adenylate kinase fluxes during stimulation was consistent with the observed PCr depletion in MMKO muscle after 2 s only if ADP-stimulated oxidative phosphorylation was included in the model. Taken together, the results suggest that cytoplasmic ADP more rapidly increases and oxidative phosphorylation is more rapidly activated at the onset of contractions in MMKO compared with WT muscles.

NASA Discipline Cell Biology↗
NASA NTRS2010

Mission Simulation of Space Lidar Measurements for Seasonal and Regional CO2 Variations

Results of mission simulation studies are presented for a laser-based atmospheric [82 sounder. The simulations are based on real-time carbon cycle process modeling and data analysis. The mission concept corresponds to the Active Sensing of [82 over Nights, Days, and Seasons (ASCENDS) recommended by the US National Academy of Sciences Decadal Survey of Earth Science and Applications from Space. One prerequisite for meaningful quantitative sensor evaluation is realistic CO2 process modeling across a wide range of scales, i.e., does the model have representative spatial and temporal gradients? Examples of model comparison with data will be shown. Another requirement is a relatively complete description of the atmospheric and surface state, which we have obtained from meteorological data assimilation and satellite measurements from MODIS and [ALIPS0. We use radiative transfer model calculations, an instrument model with representative errors ' and a simple retrieval approach to complete the cycle from "nature" run to "pseudo-data" CO2, Several mission and instrument configuration options are examined/ and the sensitivity to key design variables is shown. We use the simulation framework to demonstrate that within reasonable technological assumptions for the system performance, relatively high measurement precision can be obtained, but errors depend strongly on environmental conditions as well as instrument specifications. Examples are also shown of how the resulting pseudo - measurements might be used to address key carbon cycle science questions.

Kawa, Stephan↗
NASA NTRS2021

Delaware Ecological Forecasting: Assessing Land Cover and Soil to Identify Suitable Sites for Tidal Marsh Migration in Delaware

Tidal wetlands provide vital resources for the state of Delaware, crucial not only for maintaining important ecosystem functions, but also for providing human populations with substantial services. Healthy wetland networks offer protection from severe weather, reduce flooding, improve water quality, and provide opportunities for education and recreation. However, human activities in combination with natural events, continue to cause substantial loss of wetland cover and damage wetland health. Over the last thirty years, the state of Delaware has experienced a net loss of roughly 5,000 acres of wetland. In collaboration with the Delaware Department of Natural Resources and Environmental Control (DNREC), the team used NASA Earth observations including Landsat 5 Thematic Mapper (TM), Landsat 8 Operational Land Imager (OLI), Terra Moderate Resolution Imaging Spectroradiometer (MODIS), and Global Precipitation Measurement Integrated Multi-Satellite Retrievals (GPM IMERG) to develop a methodology to monitor recent changes in wetland cover and forecast landward marsh migration due to sea-level rise, changes to climate, and human development. Trend analysis of current and past climate conditions in precipitation and temperature revealed an overall increase in both metrics. Using Land Change Modeler in TerrSet and Suitability Modeler in ArcGIS Pro, the team visualized landcover shifts over the last 20 years, indicating a general pattern of net wetland loss and identified locations where marsh migration could potentially occur in the future. These observations will enable better planning for restoration activities and in form decision-making to preserve wetland health and ecosystem functions.

McKenna Brahler↗
DOE OSTI2026

An information-matching approach to optimal experimental design and active learning

The efficacy of mathematical models heavily depends on the quality of the training data, yet collecting sufficient data is often expensive and challenging. Many modeling applications require inferring parameters only as a means to predict other quantities of interest (QoI). Because models often contain many unidentifiable (sloppy) parameters, QoIs often depend on a relatively small number of parameter combinations. Therefore, we introduce an information-matching criterion based on the Fisher information matrix to select the most informative training data from a candidate pool. This method ensures that the selected data contain sufficient information to learn only those parameters that are needed to constrain downstream QoIs. It is formulated as a convex optimization problem, making it scalable to large models and datasets. Here, we demonstrate the effectiveness of this approach across various modeling problems in diverse scientific fields, including power systems and underwater acoustics. Finally, we use information-matching as a query function within an active learning (AL) loop for materials science applications. In all these applications, we find that a relatively small set of optimal training data can provide the necessary information for achieving precise predictions. These results are encouraging for diverse future applications, particularly AL in large machine-learning models.

Materials science↗
DOE OSTI2022

Scale-dependent tipping points of bacterial colonization resistance

The commonly observed stability of natural microbiomes is important for their function, yet the ubiquity of microbiome stability remains enigmatic. The strongest form of stability, colonization resistance, protects residents against invaders and is often associated with specific porous structures, such as skin follicles or intestinal crypts. By systematically probing the colonization of fly gut–derived bacteria in microfluidic pores of varying sizes, we revealed that colonization patterns and invasion rates strongly depend on the pore size. Mathematical modeling shows that bacteria spontaneously tend to organize into a dense colonization-resistant state in pores exceeding a critical size. The scale dependence of stability and resilience could bias ecological filtering in microbiomes and should be considered in the design of microbial ecology experiments.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Self-assembled reconfigurable pump architectures via magnetic colloidal swarms

Self-assembled swarms of interactive active units, which are adaptive and dynamically reconfigurable to accommodate different functionalities, represent a promising platform for the development of next-generation robotics. Here, we utilize the emergent collective behavior of active magnetic colloids confined in quasi-two-dimensional arrays of overlapping wells to demonstrate the self-organization of a colloidal swarm into a dynamic pump architecture capable of controlled transport of passive cargo particles. This dynamic architecture provides a global unidirectional looping flow pattern along the entire length of the system. We show that the flow direction of the dynamic swarm-based pump can be externally controlled by a phase shift of a driving magnetic field energizing the swarm. The experimental observations are supported by computational modeling based on phenomenological coarse-grained particle dynamics coupled to shallow-water Navier-Stokes hydrodynamics. In conclusion, our findings demonstrate how the emergent collective behavior of a swarm can be orchestrated into a desired functionality by exploiting the interplay between activity and confinement potentials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Curing inhibition and shelf stability in silicone formulations for direct ink writing

Various potential hydrosilylation inhibitors were incorporated into a silicone formulation for 3D printing. Different inhibitors resulted in peak cure temperatures from 42.8 to 180.3°C. The curing behavior of formulations with 1-ethynyl-1-cyclohexanol (ETCH), which exhibited a peak cure temperature of 98.4°C, was characterized for different ETCH concentrations and storage conditions. The curing was modeled using time temperature superposition, revealing an activation barrier of 89 kJ/mol. Overall, characterization resulted in a conservative recommended shelf life of 90 days. In conclusion, these studies offer insights into the stability of these formulations and the importance of inhibition for producing reliable, printable inks.

36 MATERIALS SCIENCE↗
DOE OSTI2025

DOE FAIR Surrogate Benchmarks Supporting AI and Simulation Research (SBI Surrogate Benchmark Initiative) (Final Report)

Computational Science is being revolutionized by integrating AI and simulation and, in particular, by deep learning surrogate models that can replace all or part of traditional large‐scale HPC computations. Such surrogates can achieve remarkable performance improvements, as much as several orders of magnitude, and save both compute time and energy. The Surrogate Benchmark Initiative (SBI) project creates a community repository and FAIR (Findable, Accessible, Interoperable, and Reusable) data ecosystem for HPC application surrogate benchmarks. The SBI team comes from Argonne National Laboratory (ANL), Indiana University (IU), Rutgers University, the University of Tennessee, Knoxville (UTK), and the University of Virginia(UVA). SBI repositories include data, code, and all relevant collateral artifacts, that the science and engineering community needs to use and reuse these data sets and surrogates. SBI repositories generate active research from both participants in SBI and the broader AI and domain science communities. This project develops surrogates that use several different neural nets to learn and quickly infer the results of simulations and data systems and capture them as surrogate benchmarks with a rich set of metadata, covering. Data; Model; Metrics specification; Machine specification; Science, Speed, Power Results, We research FAIR metadata for these benchmarks. We develop application surrogate examples as benchmarks across many fields (ANL, UTK, IU, UVA). We also study non Surrogate benchmarks that have many common features and similar issues regarding FAIRness. We work with MLCommons (UVA, UTK), which is a major machine learning benchmarking activity where we get metadata ontologies, software, and benchmarks, benchmarks have datasets, models, and metadata, and they need a technical framework developed by UTK and Rutgers and deployed by UVA. We study features of Surrogates, including performance, training set size, and uncertainty quantification (Rutgers, UVA and IU).

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

The DELVE Quadruple Quasar Search. I. A Lensed Low-luminosity Active Galactic Nucleus

A quadruply lensed source, J125856.3–031944, has been discovered using the DELVE survey and Wide-field Infrared Survey Explorer W1–W2 colors. Follow-up direct imaging carried out with the Magellan Baade 6.5 m telescope is analyzed, as is spectroscopy from the 2.5 m Nordic Optical Telescope. The lensed image configuration is kite-like, with the major axis of the lensing galaxy along the symmetry axis of the kite, and with the faintest image at its tail. Redward of 6000 Å, the tail image is strongly blended with the lensing galaxy. The Sloan g direct imaging carried out with Magellan permits deblending. As the lensed image configuration is nearly circular, simple models give high predicted magnifications for all four images. The source’s narrow emission lines at redshift z = 2.225 and low intrinsic luminosity qualify it as a type 2 active galactic nucleus. The Magellan image shows a substantial residual that suggests a second lensing galaxy.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

An assessment of power flexibility from commercial building cooling systems in the United States

Understanding varying characteristics and aggregate potential of power flexibility from different building types considering regional diversity is critically important to actively engaging building resources in future eco-friendly, low-cost, and sustainable power systems. This paper presents a comprehensive characteristics analysis and potential assessment of the power flexibility from heating, ventilation, and air conditioning (HVAC) loads in commercial buildings in the U.S. using a simulation-based method. In this method, commercial buildings are first grouped by building types and climate regions. The U.S. Department of Energy Commercial Prototype Building Models are used to represent an average building in each group and are simulated to characterize corresponding power flexibility. Based on building survey data, the number of commercial buildings in each group is estimated and used to calculate aggregate power flexibility. It is found that HVAC loads in commercial buildings offer more flexibility for increasing power consumption than for decreasing it. The power consumption of commercial buildings in the U.S. can be increased by 46 GW and decreased by 40 GW on peak summer days. Among all commercial building types, standalone retail buildings provide the most absolute flexibility while the medium office buildings have the most flexibility as a percentage of the rated power consumption.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1975

High energy gamma-ray radiation above 300 keV associated with solar activity

The present state of knowledge about the production of gamma-ray lines and continuum during the impulsive phase of solar flares is reviewed. It is noted that the only definite evidence for gamma rays associated with solar flares was obtained by OSO 7 during the events of August 4 and 7, 1972. This experimental evidence is examined, and gamma-ray line emission mechanisms are discussed, particularly positron annihilation through positronium formation. It is shown that if all the data are taken into account, neither the preflare nor the postflare accumulation model for gamma-ray emission can be ruled out.

Chupp, E. L.↗
DOE OSTI2023

Algal Biomass Production via Open Pond Algae Farm Cultivation: 2022 State of Technology and Future Research

The annual State of Technology (SOT) assessment is an essential activity for platform research conducted under the Bioenergy Technologies Office (BETO). It allows for the impact of research progress (both directly achieved in-house at the National Renewable Energy Laboratory [NREL] and furnished by partner organizations) to be quantified in terms of economic improvements in the overall biofuel production process for a particular biomass processing pathway, whether based on terrestrial or algal biomass feedstocks. As such, initial benchmarks can be established for currently demonstrated performance, and progress can be tracked toward out-year goals to ultimately demonstrate economically viable biofuel technologies. NREL's algae SOT benchmarking efforts focus both on front-end algal biomass production and separately on back-end conversion to fuels through NREL's "combined algae processing" (CAP) pathway. The production model is based on outdoor long-term cultivation data, enabled by comprehensive algal biomass production trials conducted under the Development of Integrated Screening, Cultivar Optimization, and Verification Research (DISCOVR) consortium efforts, driven by data furnished by Arizona State University (ASU) at the Arizona Center for Algae Technology and Innovation (AzCATI) testbed site. The CAP model is based on experimental efforts conducted primarily under NREL research and development projects. This report focuses on front-end algal biomass production, documenting the pertinent algal biomass cultivation parameters that were input to the NREL open pond algae farm model. Through partnerships under DISCOVR, collaborators at ASU furnished details on cultivation performance metrics including biomass productivity and harvest densities for recent growth trials done at the AzCATI site. The resulting biomass productivity was calculated at 18.5 g/m2/day (ash-free dry weight [AFDW], annual average) for seasonal cultivation of Picochlorum celeri, Tetraselmis striata LANL1001, and Monoraphidium minutum 26B-AM biomass strains at the ASU site. Picochlorum celeri achieved the best productivity from May to September, with Monoraphidium minutum 26B-AM being used in October, November, March, and April, and Tetraselmis striata employed during winter months (December through February). Beyond the standard SOT models, in Appendix C of this report we also present an industry case study evaluating several scenarios reflective of outdoor cultivation data furnished by an industry collaborator. This case study provides a supplementary datapoint on work being performed elsewhere achieving comparable cultivation productivity with more favorable compositional quality, producing biomass enriched in lipids as may be more optimal for conversion upgrading to fuels and products.

09 BIOMASS FUELS↗
DOE OSTI2025

Environmental Factors Associated With Fall Phytoplankton Blooms in the Northern Bering and Chukchi Seas

This study investigates environmental drivers of fall phytoplankton blooms in the Arctic, focusing on the northern Bering and Chukchi seas. Random Forests models were used to analyze covariates of fall phytoplankton blooms from 2013 to 2018, incorporating shipboard, remote sensing, and modeled environmental properties. Four regional models and one comprehensive all-station model considered fall as well as midsummer conditions. Midsummer properties included suspended particulate matter, chlorophyll-a, and the proportion of degraded pheophytin to chlorophyll-a used as a proxy for bloom stage. Open water duration was one of the highest ranked factors in predicting fall blooms. Open water duration also influences the stage of midsummer (July) blooms as indicated by pheophytin proportions, which in turn were the highest-ranked factor for predicting fall bloom events in the Chirikov Basin (northern Bering Sea between St. Lawrence Island and the Bering Strait) and the Chukchi Sea. Wind direction, specifically easterly winds, was an important predictor in the northern Bering Sea. Maximum wind speed ranked highly at stations located within the nutrient-poor Alaska Coastal Current in the Chukchi Sea. However, stormy days, average and maximum wind speeds generally ranked low in importance as a predictor of fall bloom events. Other parameters, including photosynthetic active radiation, modeled nutrient concentrations, mixed layer depth, and time since sea ice breakup date showed strong but regionally varying relationships with fall blooms. Altogether, results from these Random Forests models suggest that high wind events and storms in the absence of sea ice provide an incomplete narrative for initiating fall bloom events.

Gaffey, C. B. [Clark University, Worcester, MA (Un↗
DOE OSTI2022

A machine learning approach to water quality forecasts and sensor network expansion: Case study in the Wabash River Basin, United States

Abstract Midwestern cities require forecasts of surface nitrate loads to bring additional treatment processes online or activate alternative water supplies. Concurrently, networks of nitrate monitoring stations are being deployed in river basins, co‐locating water quality observations with established stream gauges. However, tools to evaluate the future value of expanded networks to improve water quality forecasts remains challenging. Here, we construct a synthetic data set of stream discharge and nitrate for the Wabash River Basin—one of the United States’ most nutrient polluted basins—using the established Agro‐IBIS and THMB models. Synthetic data enables rapid, unbiased and low‐cost assessment of potential sensor placements to support management objectives, such as near‐term forecasting. Using the synthetic data, we established baseline 1‐day forecasts for surface water nitrate at 12 cities in the basin using support vector machine regression (SVMR; RMSE 0.48–3.3 ppm). Next, we used the SVMRs to evaluate the improvement in forecast performance associated with deployment of additional nitrate sensors. We identified the optimal sensor placement to improve forecasts at each city, and the relative value of sensors at each candidate location. Finally, we assessed the co‐benefit realized by other cities when a sensor is deployed to optimize a forecast at one city, finding significant positive externalities in all cases. Ultimately, our study explores the potential for machine learning to make near‐term predictions and critically evaluate the improvement realized by expanding a monitoring network. While we use nitrate pollution in the Wabash River Basin as a case study, this approach could be readily applied to any problem where the future value of sensors and network design are being evaluated.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Accelerating Battery Simulations by Using High Performance Computing and Opportunities with Machine Learning

The US Department of Energy (DOE) estimates that the battery pack cost of $60 per kilowatt-hour while increasing the driving range to over 300 miles and vehicle charging under 15 min or less would enable mass penetration of electric vehicles in the USA by 2030. These projections are based on the currently available high-density cell chemistry combined with a system level design and optimized electrodes. Electrodes for current state-of-the-art lithium-ion cell technology are fabricated from electrode slurry comprising of active material, polymeric binder, and conductive diluent such as carbon black that are coated on metal current collectors such as copper and aluminum. Given these challenging requirements for development of electrical energy storage devices for future transportation needs, a predictive simulation capability which can accelerate design by considering performance and safety implications of different geometry, materials, and chemistry choices is required. In this chapter, we discuss our state-of-the-art three-dimensional modeling framework, providing examples on battery performance and safety simulations. We also present approaches to use machine learning in the context of large datasets that are becoming available.

Allu, Srikanth↗
DOE OSTI2020

Single-Facet Dominant Anatase TiO 2 (101) and (001) Model Catalysts to Elucidate the Active Sites for Alkanol Dehydration

Alkanol dehydration on Lewis acid-base pairs of transition metal oxide catalysts is a reaction of importance in oxygen removal from biomass-derived feedstocks and their conversion to chemicals in general. However, catalysts with a high degree of structural heterogeneity, such as commercial TiO 2 powders, are not well-suited to establish rigorous structure-function relationships at an atomic level. Here, we provide compelling evidence for the effects of surface orientation of TiO 2 catalyst on elimination reactions of alcohols. Two anatase titania model catalysts, with preferential exposure of (101) and (001) facets, were synthesized and studied for 2-propanol dehydration using kinetic, isotopic, microscopic, and spectroscopic measurements, coupled with DFT calculations. Surface Lewis acid sites were found to be active for 2-propanol dehydration and (101) facets are more reactive than (001) facets under the reaction conditions studied. On both anatase surfaces, 2-propanol was found to dehydrate via concerted E2 elimination pathways, but with different initial states and thus also different intrinsic activation barriers. Molecular 2-propanol dehydration dominates on TiO2 (101) while on TiO 2 (001), 2-propanol simultaneously converts to more stable 2-propoxide before dehydration, which then requires higher activation energies for E2 elimination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Manipulating Aromaticity to Redirect Topochemical Polymerization Pathways

Topochemical polymerization (TCP) represents an essential route to create regio- and stereoregular polymers through solid-state transformations. Herein, we present an innovative strategy for controlling topochemical polymerization pathways by tailoring the terminal group aromaticity in the para-azaquinodimethane (AQM) ring system. Substituting phenyl groups with less aromatic furyl units extends significant spin density delocalization across the conjugated core upon thermal activation, inducing significant diradicaloid characters at furyl positions and enabling unconventional reactivities in both solution and solid states. Thermal treatment in toluene yields a unique cyclophane dimer formed via furyl-methine C-C coupling, confirmed by X-ray crystallography, while solid-state reactions produce polymers formed via both intercolumnar furyl-methine coupling and intracolumnar methine-methine coupling. The spin-center-directed mechanism underlying these transformations is validated through theoretical modeling and isotopic labeling experiments. This study highlights the prowess of aromaticity modulation in functional pro-aromatic systems, which enables the synthesis of polymers with main chain structures that are otherwise difficult to access.

Zhang, Qingsong↗