Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Worker”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Radiant Heat Transfer to Absorbing Gases Enclosed Between Parallel Flat Plates with Flow and Conduction

An analysis is presented for obtaining two-dimensional temperature profiles and heat transfer in a radiation-absorbing gray gas of uniform absorptivity under the combined influence of thermal radiation, conduction, and gas flow. The gas is enclosed in a channel of infinite width and finite length formed by two semi-infinite parallel flat plates. These plates are black emitting surfaces, and the ends of the channel are formed by porous black surfaces through which the gas can flow into or out of the channel. These porous black end surfaces are used to simulate the radiation environment external to the channel. First, results are obtained for heat transfer between the plates in the absence of both conduction and flow. These results are found to be in good agreement with those obtained for the same conditions by previous workers. Results are then presented for heat transfer between the plates for the case of a radiating and conducting, but stagnant, gas separating the plates. The effects of the interactions between radiation and conduction are discussed. It was found that the heat transfer for combined radiation and conduction in an absorbing gas is slightly greater than the sum for each process taken separately. Finally, results are given for heat transfer from the plates to a flowing, radiating gas in the absence of conduction. The two plates are at the same temperature, and the gas enters the channel with uniform velocity and temperature. The results obtained for this case indicate that the heat transferred to the flowing gas from the constant temperature surfaces goes through a maximum as the absorptivity of the gas increases. This is in qualitative agreement with earlier results obtained by other investigators. All the results are presented in terms of dimensionless parameters, for the sake of generality, and the derivation of the dimensionless parameters, which are indicative of the effects of conduction and flow is presented.

Gray Gas↗

NACA Conference on Aerodynamic Problems of Transonic Airplane Design

During the past several years it has been necessary for aeronautical research workers to exert a good portion of their effort in developing the means for conducting research in the high-speed range. The transonic range particularly has presented a very acute problem because of the choking phenomena in wind tunnels at speeds close to the speed of sound. At the same time, the multiplicity of design problems for aircraft introduced by the peculiar flow problems of the transonic speed range has given rise to an enormous demand for detail design data. Substantial progress has been made, however, in developing the required research techniques and in supplying the demand for aerodynamic data required for design purposes. In meeting this demand, it has been necessary to resort to new techniques possessing such novel features that the results obtained have had to be viewed with caution. Furthermore, the kinds of measurements possible with these various techniques are so varied that the correlation of results obtained by different techniques generally becomes an indirect process that can only be accomplished in conjunction with the application of estimates of the extent to which the results of measurements by any given technique are modified by differences that are inherent in the techniques. Thus, in the establishment of the validity and applicability of data obtained by any given technique, direct comparisons between data from different sources are a supplement to but not a substitute for the detailed knowledge required of the characteristics of each technique and fundamental aerodynamic flow phenomena.

Source record↗

Hole saw drill attachment has zero force reaction

Zero reaction tools require no force application by workers in space. The tool accomplishes hole cutting by holding the workpiece and feeding the cutting blade into and through it by forces entirely absorbed within the tool.

Holmes, A. E.↗

Short Period Fluctuations in Intelligence Final Report

The problem of isolating fluctuations in intellectual function is one that has long intrigued both psychologists and non-psychologists, We are all aware of our own short-period physiological, mood and motivational changes and many believe that their intelligence must undergo similar change. 1965 for a recent review) does not provide support for this kind of argu- ment. It indicates that measures of intelligence - -at least those intended for use with people other than infants --are usually highly stable over both short and rather extended periods of time: the changes which are indicated have almost always been regarded as errors of measurement. Thus in scientific developments (as opposed, perhaps, to common- sense discussions) ;intelligence usually has been regarded as a highly stable attribute of man. But existing scientific evidence (see Tyler, A notable exception to the scientific theory arguing (albeit im- plicitly) that human intellect does not fluctuate over short period of time is that of Moran (1961) and his co-workers (Moran, Kimble & Mefferd, 1960; 1964; Moran & Mefferd, 1959). The work of these in- vestigators has been directed at designing alternate -form tests to measure some of what are now regarded as the major, replicated-by- research dimensions of human intelligence, viz., what are known as the primary mental abilities (French, 1951: French, Ekstrom & Price, 1963; Guilford, 1966; Guilford & Merrifield, 1960). The Repetitive Psychological Measures (RPM) resulting from this work are intended to assess "change in performance with time" (Moran & Mefferd, 1959: p. 269). little has been done to determine whether or not the performances actually assessed do, in fact, change in a reliable manner. Indeed, evidence somewhat contrary to an hypothesis of short-period change is provided by the high (relative to test length) test-retest correlations ob- tained over a period of 3 hours with the RPM tests (Moran & Mefferd, 1959; Table 2). Hence, while a basic hypothesis underlying this work certainly does imply that abilities change over short periods, evidence for this hypothesis either has not been developed or, where it has (as in test-retest correlations), does not provide convincing support for the hypothesis

Intelligence↗

Advances in Tactical Rocket Propulsion Conference Proceedings

An AGARD Colloquium on 'Progress in Tactical Rocket Propulsion' was held at La Jolla, California, on April 22 and 23, 1965. The unclassified papers, or unclassified versions of classified papers, presented at this meeting form the contents of the present AGARD conference proceedings, which has been identified by a new title that reflects more properly the scope of the remaining technical papers. The articles contained in this volume represent significant evaluations of the status of solid-propellant, liquid-propellant and hybrid-propellant rocket. development. Together with the reviews, they should provide a useful reference source for research workers and students alike.

S S Penner↗

Energy dependence of cross sections of cosmic ray nuclei in tungsten

An ionization spectrometer consisting of 12 layers of tungsten each 6.13 gm cm/2 thick and 7 iron modules each 70 gm cm/2 thick was flown in a balloon at an altitude of 6 gm cm/2 for 16 hours. The distributions of the first interaction points are used to determine the mean free path of the incident particles. At energies of 20 GeV the proton m.f.p. of 140 gm cm/2 is in agreement with that of other workers. The m.f.p.'s of heavy nuclei have been determined as a function of energy up to a total energy of 1000 GeV. These results are compared with the overlap model of nucleus-nucleus collisions. For C nuclei interacting with W the overlap parameter is -2.6 x 10/13 cm. The energy dependence of this parameter is discussed.

Balasubrahmanyan, V. K.↗

Magnetostriction and magnetoelastic quantum oscillations in P-type lead telluride

A detailed experimental and theoretical study of quantum oscillations in the magnetostriction and Young's modulus of p-PbTe is presented. The valance band of PbTe is approximated by a spheroidal, nonparabolic model in which the effects of strain on the valance band parameters are described by a deformation potential model. Using appropriate thermodynamic derivatives of the modified Lifshitz-Kosevich expression for the oscillatory parts of the electronic free energy, it is shown that both types of oscillations arise mainly from relative shifts of the valance band maxima due to shear strains, accompanied by intervalley charge transfer. Band parameters derived from the periods, phases, and spin splitting of the oscillations are in generally good agreement with values reported by other workers. A detailed comparison is made of the experimentally observed oscillation amplitudes with those predicted by theory, and satisfactory agreement is found. The ratio of the amplitudes of the two effects yields a value of the valance band deformation potential in good agreement with a value found from piezoresistance experiments by Burke.

Thompson, T. E.↗

Liquid propellant rocket combustion instability

The solution of problems of combustion instability for more effective communication between the various workers in this field is considered. The extent of combustion instability problems in liquid propellant rocket engines and recommendations for their solution are discussed. The most significant developments, both theoretical and experimental, are presented, with emphasis on fundamental principles and relationships between alternative approaches.

Harrje, D. T.↗

The use of the transmission windows of the Fabry-Perot interferometer in the detection of Raman scattered radiation from atmospheric gases.

Demonstration that the use of the Fabry-Perot interferometer as a filter with transmission windows occurring at regular intervals in wave numbers provides a highly sensitive method for detection of atmospheric gases using their rotational Raman spectra excited by a suitable laser. Some of the operating advantages include signal gains of several orders of magnitude, a simple direct interpretation of the results in terms of the density and types of the gaseous constituents, size and weight reductions from conventional apparatus, ease of operation, and relative freedom from interference from other molecules in the scattering volume. This method is compared with the techniques that have been discussed in the literature by other workers in the field.

Smith, W. H.↗

Magnetospheric substorms in the distant magnetotail observed by Imp 3.

Study of variations of the magnetic field and plasma sheet in the distant magnetotail (20 to 40 earth radii) during magnetospheric substorms on the basis of the Imp 3 magnetic-field and particle data. Depending on the locations of the satellite with respect to the boundary of the plasma sheet, the variations differ greatly. However, the present results and the results of other workers give a clear indication of an increase of the magnitude of the field outside the plasma sheet and of the simultaneous ?thinning' of the plasma sheet during an early phase of substorms. At about the maximum epoch or during the recovery phase of substorms, the plasma sheet expands and appears to be inflated to at least the presubstorm level. Furthermore, a large excessive flux of the magnetic (approximately equal to Z component) field, as compared with the flux of the original dipole field, appears across the neutral sheet.

Meng, C. I.↗

Noise in avalanche transit-time devices.

A survey of work performed on noise in avalanche transit-time devices is presented. Both theoretical and experimental results on noise mechanisms and performance of these devices, when they are employed as oscillators, amplifiers, and self-oscillating mixers, are reviewed. Several unexplained experimental results and points of disagreement between the experimental work results of various workers are identified. Suggestions for further studies are offered.

Gupta, M.↗

Lunar reflectivity at 0.86-centimeter wavelength.

Measurement of backscattering of 0.86-cm circularly polarized radiation by 29 regions on the moon. Both circular polarizations were received. At a given angle of incidence, power received in the 'expected' polarization was greater for the highland regions than for the seas by roughly 1 dB. For moderately large angles of incidence phi, this return diminishes more rapidly than cosine phi, although perhaps not as rapidly as it does at longer wavelengths. The cross section of the whole moon is 5 plus or minus 2% of the geometric cross section; about 80% of the cross section is ascribable to diffuse scattering. The polarization ratio for the echoes varies smoothly with the angle of incidence, from 0.7 at the subradar point to 0.4 at 70 deg. The depolarization is the same for marial and highland regions, and at large angles of incidence it is the same as has been found at 23 and 68 cm by other workers.

Mccue, J. J. G.↗

Teleoperators - A growth industry.

Teleoperators (remote operators), equipped with TV systems, manipulators, and highly mobile vehicles, can extend man's manipulative and sensory capabilities into distant or hazadous environments. It is shown how teleoperator technology will lead to autonomous robots, and from them and special purpose teleoperators, to a completely new industrial system. Various applications are described, and it is pointed out that teleoperators do not replace workers.

Johnsen, E. G.↗

Public health applications of remote sensing of the environment, an evaluation

The available techniques were examined in the field of remote sensing (including aerial photography, infrared detection, radar, etc.) and applications to a number of problems in the wide field of public health determined. The specific areas of public health examined included: air pollution, water pollution, communicable disease, and the combined problems of urban growth and the effect of disasters on human communities. The assessment of the possible applications of remote sensing to these problems was made primarily by examination of the available literature in each field, and by interviews with health authorities, physicists, biologists, and other interested workers. Three types of programs employing remote sensors were outlined in the air pollution field: (1) proving ability of sensors to monitor pollutants at three levels of interest - point source, ambient levels in cities, and global patterns; (2) detection of effects of pollutants on the environment at local and global levels; and (3) routine monitoring.

Source record↗

Lagrangian description of warm plasmas

Efforts are described to extend the averaged Lagrangian method of describing small signal wave propagation and nonlinear wave interaction, developed by earlier workers for cold plasmas, to the more general conditions of warm collisionless plasmas, and to demonstrate particularly the effectiveness of the method in analyzing wave-wave interactions. The theory is developed for both the microscopic description and the hydrodynamic approximation to plasma behavior. First, a microscopic Lagrangian is formulated rigorously, and expanded in terms of perturbations about equilibrium. Two methods are then described for deriving a hydrodynamic Lagrangian. In the first of these, the Lagrangian is obtained by velocity integration of the exact microscopic Lagrangian. In the second, the expanded hydrodynamic Lagrangian is obtained directly from the expanded microscopic Lagrangian. As applications of the microscopic Lagrangian, the small-signal dispersion relations and the coupled mode equations are derived for all possible waves in a warm infinite, weakly inhomogeneous magnetoplasma, and their interactions are examined.

Kim, H.↗

Occupational Medical Trends in the 70's from Industrial View

Industrial health measures to ensure worker productivity constitute physical examinations as well as environmental control systems. Considered are automatic record keeping facilities for case histories, preventive medical and mental counselling, development of safety standards, and health insurance and disability benefit plans. Cooperation of industry health programs with community health aspects is required to eliminate the loss of manpower capability through alcoholism or mental disease.

Williamson, S. M.↗