Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WASHINGTON”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Annual Report of Monitoring at Barnes, Kansas, in 2017

Barnes, Kansas, is a small rural community (population approximately 150) in Washington County, in north-central Kansas. Barnes is located in Section 9, Township 4 South, Range 5 East, at approximate latitude 39°43'0" north and longitude 96°52'25" west (USGS 1968). The city lies in a transition zone between the Flint Hills and the glaciated region. The area’s topography consists of gently sloping hills of Pleistocene loess (< 20 ft) overlying a shale unit and interbedded shale, limestone, and siltstone of the Permian Chase Group. Groundwater for the public water supply (PWS) is obtained from wells PWS2 and PWS3 at reported depths of 155 ft and 160 ft below ground level (BGL), respectively, located in the northwestern portion of the city. The water is produced from the bedrock aquifer of the Chase Group. Section 2 summarizes the hydrogeologic conceptual site model.

54 ENVIRONMENTAL SCIENCES↗

Performance Metric for Cementitious Waste Form Inventory Release in the Integrated Disposal Facility

This report describes work supporting Phase 1 of the 2018 Department of Energy (DOE) Office of River Protection’s (ORP) Grand Challenge recipient proposal “Cementitious Immobilization of Treated LAW and Ancillary Benefits to Risk Reduction in Cross Site Transfer”. Phase 1 was to establish a performance metric for grout leachability against which laboratory leach data (as observed diffusivities) can be assed, followed by a comparison of historical test data against this metric. Historically, advancements in the cementitious (grout) waste form performance have been made over the last 40 years, with the majority of progress achieved within the past 8 years as part of the Washington River Protection Solutions, LLC testing program. This report presents a summary of that effort relevant to the Hanford Site.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Dose Modeling for Harborview Research and Training Facility

The Harborview Research and Training (R&T) Facility at the University of Washington (UW) was accidently contaminated from a breached sealed source of Cesium-137. The release occurred during removal of the sealed source from its holder within a portable hot cell in the loading dock area near room 220. The loading dock and northeast corner of the building above the ground floor were impacted by the release, whereas the remaining portions of the R&T Facility were minimally affected. Detailed descriptions of the R&T Facility and the affected area/rooms are included in Section 2. The RESRAD Team in the Environmental Science Division of Argonne National Laboratory visited the site on August 12, 2019, and interviewed the R&T Facility building manager and staff working in the building at that time. Site- and building-specific data were collected including building floor plan CAD drawings, building occupants’ working hours, contaminated rooms photos and their dimensions, building air exchange rates, building materials and “curtain wall” details, and so forth. These data are being used in the dose modeling for potential occupants of the building after it is remediated. The dose modeling was performed using the RESRAD-BUILD computer code, which is designed for the evaluation of radiologically contaminated buildings (Yu et al. 2003). Two hypothetical building occupants of the Harborview R&T Facility were evaluated: a researcher occupying room 726 (a research laboratory on the seventh floor) and a custodian occupying room 220 (loading dock and trash compactor room with a rollup door). A maintenance worker that will be spending less time in impacted areas was not modeled because it will be bounded by other two hypothetical building occupants modeled. A summary description of the RESRAD-BUILD is provided in Appendix A, and the modeling of potential doses to a researcher and a custodian is described in detail in Section 3. A summary and a discussion of the dose modeling results are included in Section 4. The parameters used in the RESRAD-BUILD modeling are included in Appendix B. This report documents the dose modeling results; it does not describe measurements of the actual radioactivity levels at the Harborview R&T Facility, nor does it set any expectation for the actual final radioactivity levels. The radiation doses presented are modeling results based on the generic screening values of Cs-137 and several conservative assumptions and are meant only to assist in decision making regarding decontamination of the Harborview R&T Facility.

61 RADIATION PROTECTION AND DOSIMETRY↗

2018 Wood Stove Design Challenge (Final Report)

The Alliance for Green Heat hosted the 2018 Wood Stove Design Challenge on the National Mall in Washington DC from Friday, Nov. 9 – Tuesday, November 13. The Design Challenge is a technology competition designed to foster R&D of innovative, next generation wood and pellet stove designs. In 2018, the Challenge focused on two technology goals: automating the wood stove and making electricity from wood or pellet stoves.

09 BIOMASS FUELS↗

A Section 106 Evaluation of Building CP-1, Area 6, Nevada National Security Site, Nye County, Nevada

On December 17, 2015, the National Nuclear Security Administration Nevada Field Office (NNSA/NFO) vacated Building CP-1 (Building 06-CP-1) on the Nevada National Security Site (NNSS) in Nye County, Nevada. Starting in 1951, nearly all nuclear tests during the Cold War were controlled from this building on the facility, known as the Nevada Test Site for most of its years of operation. The test site was renamed the NNSS in 2010. CP-1 was the command and control center where decisions about NNSS activities were sought and made; where authorization for movements about the areas forward (north) of Mercury base camp were coordinated, granted or declined, and monitored; and where problems and emergencies in the forward areas were communicated and relayed to the appropriate agencies for solution. Some of the testing duties for the Control Point included the timing and firing of nuclear tests, air operations, security, communications, weather monitoring, and radiation safety. During tests, communications were maintained through various channels to receive and pass instructions or information to the numerous testing operations, to Washington, D.C., the national laboratories, and overhead aircraft monitoring the tests. At one time, the Security Control Center, a Class A Weather Station, and the Radiation Safety Headquarters were located in CP-1, which also contained a cafeteria, a dining area, and bunk rooms. This survey was prompted by recognition that closure of the building in place creates a situation where CP-1 is vulnerable to decay in its present and unused condition. Activities at CP-1 have been reduced gradually over time since the end of nuclear testing in 1992. The Area of Potential Effects (APE) was determined by NNSA/NFO to be a two-acre area historically considered the space directly associated with CP-1 and available to CP-1 personnel for use. The APE is bounded on the south by an unnamed main paved road into the guarded Control Point area, on the west by the edge of the parking lot for adjacent Building CP-9, on the east by the edge of the bladed cut-and-fill terrace for CP-1, and on the north by a barbed wire security fence (Figure 2). All of this lot is either bladed or covered with asphalt. Contained within the lot are eight Accessary Resources (AR) which are much more closely aligned with CP-1 than with adjacent buildings. AR are defined by the Nevada State Historic Preservation Office (SHPO) (2013) as “…related but subordinate to the principal building. Accessory resources would not exist were it not for the principal resource.” The Visual APE was determined by NNSA/NFO to be the same as the APE used for intensive survey because no exterior modifications to the resource are anticipated. The APE is located in Section 34 T11S R53E MDBM (projected) within the NNSS base called the Control Point in Area 6. It is on the 1986 Yucca Lake USGS 7.5 min. series topographic quadrangle. The Desert Research Institute (DRI) surveyed the APE with the assistance of National Security Technologies, LLC (NSTec), resulting in recordation and evaluation of CP-1 (SHPO Resource Number B14490) and eight accessory resources (AR1-AR8). This recording of CP-1 was done in three sessions. Copies of the building form and report are on file at Nevada Cultural Resources Information System (NVCRIS), DRI, and with the NNSA/NFO, Las Vegas, Nevada. Control Point refers to the support facilities of which Building CP-1, with its 126 rooms, is the most important part (Campbell et al. 1983:165). CP-1 refers to the entire building but it also is the designation for the first phase of construction, i.e. the original building. There were three major subsequent phases of additions to the building. The first two were called CP-1A (the east wing) and CP-1B (the west wing with the new War Room). A final phase filled in the hyphen between CP-1 and CP-1B with a Field Office. For convenience this last phase is called CP-1C in this report. Hence, CP-1 can refer either the entire building or to the first phase of the building exclusive of additions. The context makes clear which of the two meanings is intended in the various sections of this report. There were also two minor expansions consisting of a small battery room and a shelter for an emergency exit.

54 ENVIRONMENTAL SCIENCES↗

Impact of Crystalline Silicotitanate Particle Size on Cesium Removal Efficiency

Washington River Protection Solutions is working on a Tank-Side Cesium Removal (TSCR) system to remove Cs from Hanford tank waste supernate. Removal of 137 Cs from tank waste supernate by TSCR results in a low-activity waste (LAW) form that can be fed directly to the Hanford Waste Treatment and Immobilization Plant (WTP) LAW vitrification facility, where the supernate can be vitrified into a glass form. Crystalline silicotitanate (CST) ion exchange media, manufactured by Honeywell UOP, LLC (product IONSIV TM R9140-B), was selected for use as the ion exchange media to remove Cs at TSCR. The particle size used in testing is expected to impact the kinetic performance of the ion exchange media. Therefore, two single-column systems were tested with CST Lot 2002009604. One column contained <25 mesh sieve cut fraction and the other column contained <35 mesh sieve cut fraction. Flowrate through both test systems was adjusted to match the CST contact time expected for the full-scale operation, i.e., matched bed volumes per hour (BV/h) at 1.83 BV/h. The feed was processed downflow through the columns until ~1000 BVs of feed were processed. The waste acceptance criteria (WAC) limit for the WTP LAW vitrification facility is <3.18E-5 Ci 137 Cs per mole Na. For a tank waste containing 156 µCi/mL 137 Cs and 5.6 M Na, up to 0.114% of the influent 137 Cs concentration may be delivered to the WTP (based on 137 Cs content in AP-107 tank waste); this required a Cs decontamination factor of 876. The WAC limit was used as one of the relevant process parameters, along with the 50% breakthrough point, Cs loading per gram of CST, and the mass transfer zone.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Municipal Portfolio Performance and Policy Opportunities

A wide range of policy tools are in place to enhance energy efficiency in the built environment. However, the lion’s share of today’s energy savings opportunities have to do with energy consumption in existing buildings currently in operation. Many of the policy tools in play, including energy codes, have little to no effect on these existing buildings. New tools and resources are needed to bring existing buildings up to higher levels of energy performance. This project was focused on building a replicable framework, complete with open-source software tools and resources, to empower cities around the country to significantly enhance the energy performance of their own existing buildings and identify opportunities for future improvements. These issues were addressed through the evaluation of the performance of the municipal building stock and policy environments of four mid-size cities: Eugene, Oregon; Providence, Rhode Island; Grand Rapids, Michigan; and Tacoma, Washington. The project team worked closely with these cities to help city staff lead by example and create actionable, implementation-focused strategic energy plans for their own municipal building portfolios and to evaluate and improve city policies. A major focus throughout has been replicability and knowledge transfer (“teaching them to fish” rather than doing the work for the city).

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

ERDF Waste Disposal in the Central Plateau at the Hanford Site (Annual Status Report FY2012)

Washington Closure Hanford (WCH) operates the Environmental Restoration Disposal Facility (ERDF) to dispose of Hanford Site low-level radioactive, hazardous, or dangerous, and low-level mixed waste generated during waste site closures and some remediation activities from other Hanford Site contractors as authorized by the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). A CERCLA record of decision (ROD) (EPA 1995), including amendments (EPA, 1997, 1999, 2002, 2007, 2009), identifies the requirements associated with the facility.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

ERDF Waste Disposal in the Central Plateau at the Hanford Site (Annual Status Report FY2011)

Washington Closure Hanford (WCH) operates the Environmental Restoration Disposal Facility (ERDF) to dispose of Hanford Site low-level radioactive, hazardous, or dangerous, and low-level mixed waste generated during waste site closures and some remediation activities from other Hanford Site contractors as authorized by the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). A CERCLA record of decision (ROD) (EPA 1995), including amendments (EPA, 1997, 1999, 2002, 2007, 2009), identifies the requirements associated with the facility.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Model Package Report: Plateau to River Groundwater Model Version 8.3

This model package report documents the groundwater flow component of the Plateau to River Groundwater Model (P2R Model), which is a groundwater flow and contaminant fate and transport (F&T) simulation model used to support remedial activities conducted by CH2M HILL Plateau Remediation Company at the Hanford Site in Washington State. The objective of this report is to describe the modeling objectives, conceptualization, model implementation, calibration, sensitivity, uncertainty, configuration control, limitations, and future model enhancements of the groundwater flow component of the P2R Model.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Central Plateau Vadose Zone Geoframework

The objective of this environmental calculation file (ECF) is to document the revision of the three dimensional (3D) geoframework model (GFM) of the Central Plateau Vadose Zone (CPVZ) on the Hanford Site. CP-60925, Model Package Report: Central Plateau Vadose Zone Geoframework, documents the original version of the CPVZGFM (herein after called the CPVZ-Rev.0) and is the underlying basis for the CPVZ conceptual model. The CPVZ GFM provides a more detailed interpretation of the vadose zone hydrostratigraphic units (HSUs) in the Central Plateau area of the greater Hanford South geoframework model (HSGFM) (ECF-HANFORD-13-0029, Development of the Hanford South Geologic Framework Model, Hanford Site, Washington). The development of the CPVZ GFM provides a consistent vadose zone geologic framework that is needed to support the 3D, multiple-waste-site modeling approach proposed in CP-60405, Hanford Site Composite Analysis Technical Approach Description: Vadose Zone, while incorporating an appropriate level of geologic data and interpretations for the size of the model using current site-standard HSUs. Future more detailed site-specific investigations within the Central Plateau can then use the CPVZ GFM as a starting point instead of the larger scale HSGFM. This GFM was developed using the site standard and approved for use IHS Kingdom software. This ECF is a revision to the original model described in CP-60925, but the underlying assumptions and conceptual model are unchanged. Therefore, this revision is a new calculation of version 1.0 of the CPVZ GFM and not a new version of the GFM. Throughout this report, the original model documented in CP-60925 is called CPVZ-Rev.0and the calculation for this revision of the model is called CPVZ-Rev.1.

58 GEOSCIENCES↗

AI for Science: Report on the Department of Energy (DOE) Town Halls on Artificial Intelligence (AI) for Science

The report documents the DOE Town Halls held during 2019 at Argonne National Laboratory, Oak Ridge National Laboratory, Lawrence Berkeley National Laboratory, and in Washington, DC. From July to October 2019, the Argonne, Oak Ridge, and Berkeley National Laboratories hosted a series of four town hall meetings attended by more than 1,000 U.S. scientists and engineers. The goal of the town hall series was to examine scientific opportunities in the areas of artificial intelligence (AI), Big Data, and high-performance computing (HPC) in the next decade, and to capture the big ideas, grand challenges, and next steps to realizing these opportunities. In this report and in the Department of Energy (DOE) laboratory community, we use the term “AI for Science” to broadly represent the next generation of methods and scientific opportunities in computing, including the development and application of AI methods (e.g., machine learning, deep learning, statistical methods, data analytics, automated control, and related areas) to build models from data and to use these models alone or in conjunction with simulation and scalable computing to advance scientific research. The AI for Science town hall discussions focused on capturing the transformational uses of AI that employ HPC and/or data analysis, leveraging data sets from HPC simulations or instruments and user facilities, and addressing scientific challenges unique to DOE user facilities and the agency’s wide-ranging fundamental and applied science enterprise.

36 MATERIALS SCIENCE↗

Women in Environmental Science

Despite the prominent role that women have traditionally played in environmental activism and initiatives to promote environmental justice, women’s representation in most environmental science fields remains low. The first environmental laws in the U.S., established in the 60’s and 70’s, were propelled by movements evolved out of male dominated scientific professions, mainly engineering. To this day, environmental fields are still perceived as not open to women. Yet the field being so broad, it offers many opportunities for women scientists to contribute to the advancement of science and technology needed to address the most pressing environmental issues. To this end, the Society for Industrial Microbiology and Biotechonology organized a session at its 2019 General Meeting entitled Women in Environmental Science that showcased the work of women leading efforts in environmental fields. The session was convened by Dr. Gemma Reguera (Michigan State University) and Dr. Arpita Bose (Washington University in St. Louis) and included 4 additional speakers whose work spans basic and applied environmental research yet impacts discovery-driven science, technology development, science policy and communication, in addition to environmental advocacy and stewardship. The talks highlighted the career path of women-led teams whose research and professional activities are contributing to the development of “biobased solutions to DOE mission challenges in energy and environment”.

54 ENVIRONMENTAL SCIENCES↗

NDE Technology Development Program for Hanford DST Non-Visual Volumetric Inspection Technology – Phase II; Technical Letter Report on Air-slot NDE Sensor Maturation Testing

The Pacific Northwest National Laboratory (PNNL) located in Richland, Washington, hosted and administered Phase II Flaw Detection Performance Tests in August 2018 that allowed the newly matured ultrasonic guided wave phased-array (GWPA) air-slot NDE sensor—“Hanford-Probe A”—developed by Guidedwave to be evaluated for its flaw detection capability and repeatability. A portion of the Phase II Flaw Detection Performance Tests was performed on a subset of test flaws on which the original GWPA sensor was evaluated during Phase I Sensor Effectiveness Testing (SET) to facilitate a comparison in flaw detection performance between Hanford-Probe A and the original GWPA sensor demonstrated in Phase I. The objective of the performance comparison was to determine the extent to which GWPA sensor design changes impacted the flaw detection performance upon which selection of the sensor technology was originally based for the purpose of determining whether the flaw detection performance of the newly matured Hanford-Probe A GWPA air-slot NDE sensor is at least equal to that of the original GWPA sensor evaluated under Phase I SET. This technical letter report presents the results produced by the new Hanford-Probe A on the Phase I test flaws and the results of the flaw detection performance comparison between Hanford-Probe A and the original GWPA sensor demonstrated in Phase I.

47 OTHER INSTRUMENTATION↗

Wind Forecasting Improvement Project In Complex Terrain Near the Columbia River Gorge

In 2014 a multi-institution team led by Vaisala, Inc. was selected by the Department of Energy (DOE) to partner with multiple DOE and National Oceanic and Atmospheric Administration (NOAA) laboratories on a project designed to improve the quality of wind power forecasts in areas of complex terrain. This was the second Wind Forecast Improvement Project (WFIP2) funded by DOE and it extended from late 2014 through the middle of 2018. It encompassed an 18-month observational field campaign, numerical weather prediction (NWP) model development, extensive analysis of data and NWP output, and the creation of decision support tool algorithms to convey forecast information to end users in the wind industry. WFIP2 focused on improvements to the representation of near-surface and boundary-layer physics in NOAA’s High-Resolution Rapid Refresh (HRRR) model. Improvements to HRRR, which is run operationally over the continental United States, benefit the wind industry in multiple ways. Forecasts from the operational HRRR are used directly by wind power forecast vendors and the operators of wind plants. In addition, because HRRR is built using the widely-used Weather Research and Forecasting (WRF) model, improvements to its parameterizations become available to commercial and research institutions using WRF for a myriad of purposes. The geographic area studied by WFIP2 was a region of the Columbia River basin located to the east of the Cascade Mountains between Oregon and Washington. Home to over 6 GW of installed capacity for wind energy production, this area also hosts a variety of atmospheric phenomena either unique to or augmented by complex topography. This makes it an attractive test-bed for the analysis of wind forecast in complex terrain, though results found are should be applicable in any area of topographic complexity. WFIP2 succeeded as a collaborative effort, and while this report focuses on the activities of the team led by Vaisala, the work described here is part of a larger whole. The Vaisala team accomplished a number of specific tasks as described in this report, while also contributing to this larger effort.

17 WIND ENERGY↗

Characterization of Uranium Foil Irradiations at the WSU TRIGA Reactor Using a New Reactor Model in SCALE [Slides]

A depleted uranium foil and a highly enriched uranium foil that were irradiated at the Washington State University TRIGA reactor were used to measure the relative production of 237 U and 239 U, two key isotopes of interest in nuclear forensics, as well as their decay daughters 237 Np and 239 Pu. Total fissions in the two foils were also estimated using 99 Mo measurement. A reactor model of the TRIGA was built in the SCALE neutron transport code using dimensions obtained from an existing MCNP geometry. The model was successfully used to simulate foil fissions and the reaction rate ratios in 238 U, using the laboratory-measured isotope ratios as a benchmark. The flux distribution in the foils was determined. Finally, using the continuous energy Tsunami-3d module of SCALE, a sensitivity/uncertainty analysis was performed to determine the effects on the reaction ratio caused by other reactions in the reactor and by uncertainties in the known cross-sections.

07 ISOTOPE AND RADIATION SOURCES↗

Testing of an AP-105 Precipitation Simulant

A tank AP-105 chemical simulant was developed and diluted with Washington River Protection Solutions (WRPS)-supplied raw water to evaluate the stability of AP Farm wastes with respect to precipitation under Direct Feed Low-Activity Waste (DFLAW)-typical waste feed staging operations. The current report provides a high-level summary of the basis for simulant selection, the recommended (and prepared) simulant chemistry, and observed stability with respect to solids formation upon simulant preparation and subsequent dilution with raw water.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Stage B Uranium Sequestration Amendment Delivery Monitoring Using Time-Lapse Electrical Resistivity Tomography

The Hanford Site 300 Area lies adjacent to the Columbia River, approximately 5 km north of Richland, Washington. Past waste disposal practices in the 300 Area resulted in vadose zone uranium contamination beneath former infiltration ponds and trenches. Stage-driven water table fluctuations and river water intrusion facilitate mobilization of uranium from contaminated sediments in regions periodically occupied by the water table (i.e., the periodically rewetted zone or PRZ), thereby raising groundwater uranium concentrations above the maximum allowable contaminant level for uranium. This report documents the ERT imaging operations and interpretation of imaging results in terms of the extent of amendment delivery (including phosphate and/or carrier fluid) within the treatment area. Based on the interpretation, amendment delivery to the LVZ and PRZ was observed to be variable between each of the three imaging clusters, as shown in Figure S.1. Amendment transport in Cluster 1 exhibited significant lateral flow in comparison to Clusters 2 and 3, resulting in a final amendment distribution throughout a large portion of the LVZ and PRZ sediment between the injection wells. Cluster 2 exhibited good amendment delivery in the LVZ only near the injection wells. In the PRZ at Cluster 2, amendment was effectively distributed through the full distance between injection wells. Cluster 3 exhibited the smallest amount of lateral flow and amendment was primarily distributed in the LVZ and PRZ very near the injection wells. Imaging results below the water table suggest that more amendment entered the groundwater in Cluster 2 and Cluster 3 than in Cluster 1.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗