Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VOIDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Relationship between ductility and the porosity of additively manufactured AlSi10Mg

Additive manufacturing via selective laser melting can result in variable levels of internal porosity both between build plates and within components from the same build. In this work, sample porosity levels were compared to tensile properties for 176 samples spanning eight different build plates. Sample porosity was measured both by Archimedes density, which provided an estimation of overall porosity, and by observation of voids in the fracture surface, which provided an estimation of the porosity at the failure plane. The porosity observed at the fracture surface consistently demonstrated higher porosity than that suggested by Archimedes density. The porosity values obtained from both methods were compared against the mechanical results. Sample porosity appears to have some correlation to the ultimate tensile strength, yield strength, and modulus, but the strongest relationship is observed between porosity and ductility. Three different models were used to relate the fracture surface porosity to the ductility. The first method was a simple linear regression analysis, while the other two models have been used to relate porosity to ductility in cast alloys. It is shown that all three models fit the data well over the observed porosity ranges, suggesting that the models taken from casting theory can extend to additively manufactured metals. Finally, it is proposed that the non-destructive Archimedes method could be used to estimate an approximate sample ductility through the use of correlations realized here. Such a relationship could prove useful for design and for a deeper understanding of the impact of pores on tensile behavior.

36 MATERIALS SCIENCE↗

Pore size distribution in an uncompacted equilibrated ordinary chondrite

The extraordinarily uncompacted nature of the ordinary L chondrite fall Baszkowka gives a unique opportunity to investigate the potentially pre-compaction pore size distribution in an equilibrated ordinary chondrite. Using X-ray microtomography and helium pycnometry on two samples of Baszkowka, we have found that on average, two-thirds of the 19.0% porosity resides in inter- and intra-granular voids with volumes between {approx}3 x10{sup 05} and 3 mm{sup 3}. We show the cumulative number density of pore volumes observable by X-ray microtomography obeys a power law distribution function in this equilibrated ordinary chondrite. We foresee these data adding to our understanding of the impact processing of chondrites and their parent asteroids, where porosity and pore size play significant roles in the parameterization of impact events.

58 GEOSCIENCES↗

Synchrotron X-ray Charge Density Study of Coordination Polymer Co[subscript 3](C[subscript 8]H[subscript 4]O[subscript 4])[subscript 4[(C[subscirpt 4]H[subscript 12]N)[subscript 2](C[subscript 5]H[subscript 11]NO)[subscript 3] at 16 K

The charge density (CD) of coordination polymer Co{sub 3}(C{sub 8}H{sub 4}O{sub 4}){sub 4}(C{sub 4}H{sub 12}N){sub 2}(C{sub 5}H{sub 11}NO){sub 3} (1) has been determined from multipole modeling of structure factors obtained from single-crystal synchrotron X-ray diffraction measurements at 16 K. The crystal structure formally contains a negatively charged framework with cations and neutral molecules in the voids. However, the CD suggests that the framework is close to neutral, and therefore qualitative conclusions based on formal charge counting, e.g., about guest inclusion properties, will be incorrect. There are considerable differences in the charge distributions of the three unique benzenedicarboxylic acid linkers, which are widely used in coordination polymers. This suggests that the electrostatic properties of coordination polymer cavities, and thereby their inclusion properties, are highly tunable. The electron density topology shows that the tetrahedrally coordinated Co atom has an atomic volume which is 15% larger than that of the octahedrally coordinated Co atom. The crystal structure has both ferromagnetic and antiferromagnetic interactions, but no direct metal-metal bonding is evidenced in the CD. The magnetic ordering therefore takes place through superexchange in the oxygen bridges and the aromatic linkers. Bonding analysis of the experimental CD reveals that two oxygen atoms, O(1) and O(11), have significant covalent contributions to the metal-ligand bonding, whereas all other oxygen atoms have closed-shell interactions with the metals. This indicates that these two oxygen atoms are the key mediators of the magnetic ordering.

36 MATERIALS SCIENCE↗

Sustained Oxygen Spectral Gaps and Their Dynamic Evolution in the Inner Magnetosphere

Van Allen Probes observations of ion spectra often show a sustained gap within a very narrow energy range throughout the full orbit. To understand their formation mechanism, we statistically investigate the characteristics of the narrow gaps for oxygen ions and find that they are most frequently observed near the noon sector with a peak occurrence rate of over 30%. The magnetic moment (μ) of the oxygen ions in the gap shows a strong dependence on magnetic local time (MLT), with higher and lower μ values in the morning and afternoon sectors, respectively. Moreover, we find through superposed epoch analysis that the gap formation also depends on geomagnetic conditions. Those gaps formed at lower magnetic moments (μ < 3,000 keV/G) are associated with stable convection electric fields, which enable magnetospheric ions to follow a steady drift pattern that facilitates the gap formation by corotational drift resonance. On the other hand, gaps with higher μ values are statistically preceded by a gradual increase of geomagnetic activity. Here, we suggest that ions within the gap were originally located inside the Alfven layer following closed drift paths, before they were transitioned into open drift paths as the convection electric field was enhanced. The sunward drift of these ions, with very low fluxes, forms a drainage void in the dayside magnetosphere manifested as the sustained gap in the oxygen spectrum. This scenario is supported by particle-tracing simulations, which reproduce most of the observed characteristics and therefore provide new insights into inner magnetospheric dynamics.

79 ASTRONOMY AND ASTROPHYSICS↗

Three-dimensional structure of self-excited dust density waves under microgravity conditions

Self-excited dust density waves in a dusty plasma, containing micrometer-sized particles, have been observed under microgravity conditions at low gas pressures and high dust densities. The waves emerge spontaneously and propagate from the void edge radially outwards to the plasma boundary. We found that the wave propagates obliquely to the local ion flow in regions with high electric fields close to the sheath, whereas it propagates parallel in the plasma bulk. So far the observation was limited to a fixed two-dimensional section through the discharge volume. Recent experiments were performed on parabolic flights in a parallel plate rf discharge, which used the technique of scanning video microscopy. This technique utilizes the high temporal coherence of the waves to reconstruct their full three-dimensional structure. The analysis yields a surprising global spatial coherence of the wave phenomenon.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Particular Threshold Behavior of Dusty Plasma Instabilities

We show that some experimentally observed instabilities, concerning the void region of a dust cloud, are similar to oscillations obtained in chemical systems or neuronal dynamics. The time evolution of these instabilities follows a well-defined process particularly visible in the instability shape and frequency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nano-cell Fabrication Using the Behavior of Point Defects Induced by Ion Implantation

The authors' finding that cellular structure is formed on the GaSb, InSb and Ge surfaces by ion implantation is introduced. A novel nano-fabrication technique based on the authors' discovery, which consists of a top-down process and a bottom-up process, is performed on a GaSb surface using focused ion beam. In the top-down procedure, a two-dimensional lattice of voids (initial structure) is created by irradiation with a focused ion beam. Then, the bottom-up process for developing the initial structure into nano-cell structures is performed using the image scanning mode of FIB. The structure is observed by FIB and SEM. The possibilities of the new technique are examined, varying the ion acceleration voltage and the ion dose.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of HIFU Therapy System for Lower Extremity Varicose Veins

High-intensity focused ultrasound (HIFU) treatment utilizing microbubbles was investigated in the present study. It is known that microbubbles have the potential to enhance the heating effects of an ultrasound field. In this study, the heat accompanying microbubble oscillation was used to occlude varicose veins. Alteration of veins was observed after ultrasound irradiation. Veins were resected by stripping. In this study, two vein conditions were adopted during HIFU irradiation; non-compressed and compressed. Compressing the vein was expected to improve occlusion by rubbing the altered intima under compressed conditions. The frequency of the ultrasound was 1.7 MHz, the intensity at the focus was 2800 W/cm{sup 2}, and the irradiation time was 20 s. In this study, the contrast agent Levovist registered was chosen as a microbubble source, and the void fraction (ratio of total gas volume to liquid) in the vein was fixed at 10{sup -5}. Under non-compressed conditions, changes were observed only at the adventitia of the vein anterior wall. In contrast, under compressed conditions, changes were observed from the intima to the adventitia of both the anterior and posterior walls, and they were partly stuck together. In addition, more experiments with hematoxylin-eosin staining suggested that the changes in the vein were more substantial under the latter conditions. From these results, it was confirmed that the vein was occluded more easily with vein compression.

60 APPLIED LIFE SCIENCES↗

Modeling the Collisional-Plastic Stress Transition for Bin Discharge of Granular Material

We propose a heuristic model for the transition between collisional and frictional/plastic stresses in the flowof granular material. Our approach is based on a physically motivated, nonlinear ‘blending’ function that produces aweighted average of the limiting stresses, depending on the local void fraction in the flow field. Previously publishedstress models are utilized to describe the behavior in the collisional (Lun et al., 1984) and quasi-static limits (Schaeffer,1987 and Syamlal et al., 1993). Sigmoidal and hyperbolic tangent functions are used to mimic the observed smooth yetrapid transition between the collisional and plastic stress zones. We implement our stress transition model in an opensourcemultiphase flow solver, MFIX (Multiphase Flow with Interphase eXchanges, www.mfix.org) and demonstrate itsapplication to a standard bin discharge problem. The model’s effectiveness is illustrated by comparing computationalpredictions to the experimentally derived Beverloo correlation. With the correct choice of function parameters, themodel predicts bin discharge rates within the error margins of the Beverloo correlation and is more accurate than one ofthe alternative granular stress models proposed in the literature. Although a second granular stress model in the literatureis also reasonably consistent with the Beverloo correlation, we propose that our alternative blending function is likely tobe more adaptable to situations with more complex solids properties (e.g., ‘sticky’ solids).

42 ENGINEERING↗

DETECTION OF DISBONDING IN GLARE COMPOSITES USING LAMB WAVE APPROACH

Lamb-waves can be used to detect disbonds in composite plates. In this work, a photoacoustic technique was first applied to measure the dispersive property of a GLAss-REinforced (GLARE) composite panel. The measured phase velocity dispersion curves are consistent with the theoretical calculation using the classical transfer matrix method for layered media. Based on the obtained properties, a finite element method (FEM) model was constructed to study the influence of a disbond void on the Lamb wave propagation in the GLARE plate. It is found that the displacement amplitudes of the A{sub o} mode Lamb wave decrease while its travel time increases as the disbond size increases.

36 MATERIALS SCIENCE↗

Great thermoelectric power factor enhancement of CoSb{sub 3} through the lightest metal element filling

Lithium, the lightest metal element with a small ionic radius, is successfully filled into the voids of CoSb{sub 3} by utilizing the high pressure synthesis technique. The synthesized Li{sub 0.4}Co{sub 4}Sb{sub 12} shows the largest thermoelectric power factor of 6000 {mu}W m{sup -1} K{sup -2} among all elemental filled CoSb{sub 3} materials. This significantly enhanced thermoelectric power factor is attributed to the large carrier mobility of Li{sub 0.4}Co{sub 4}Sb{sub 12}, 61 cm{sup 2} V{sup -1} s{sup -1}, featuring a good electron crystal property for the Li-filled CoSb{sub 3} samples.

36 MATERIALS SCIENCE↗

High contrast imaging and thickness determination of graphene with in-column secondary electron microscopy

We report a new method for quantitative estimation of graphene layer thicknesses using high contrast imaging of graphene films on insulating substrates with a scanning electron microscope. By detecting the attenuation of secondary electrons emitted from the substrate with an in-column low-energy electron detector, we have achieved very high thickness-dependent contrast that allows quantitative estimation of thickness up to several graphene layers. The nanometer scale spatial resolution of the electron micrographs also allows a simple structural characterization scheme for graphene, which has been applied to identify faults, wrinkles, voids, and patches of multilayer growth in large-area chemical vapor deposited graphene. We have discussed the factors, such as differential surface charging and electron beam induced current, that affect the contrast of graphene images in detail.

36 MATERIALS SCIENCE↗

NanoXCT - A High-Resolution Technique For TSV Characterization

Lab-based Transmission X-ray Microscopy and X-ray Computed Tomography (TXM/XCT) with sub-100 nm resolution are evaluated for their application in process and quality control in microelectronics, particularly for TSV characterization. These are the techniques of choice to localize defects in copper TSVs for 3D IC integration. In contrast to other techniques like Focused Ion Beam cross-sectioning and subsequent Scanning Electron Microscopy imaging, the region of interest, i.e. the TSV, is imaged nondestructively and three dimensionally. For flat samples like thinned wafers, the tilted rotational axis tomography is proposed instead of the limited angle tomography since the better in-plane resolution increases the quality of the resulting tomogram. Yield- and reliability-limiting processes in 3D TSV technology like voids and incomplete filled vias can be made visible for an array of adjacent TSVs during one measurement without affecting the TSV.

36 MATERIALS SCIENCE↗

Preliminary engineering design of sodium-cooled CANDLE core

The CANDLE burning process is characterized by the autonomous shifting of burning region with constant reactivity and constant spacial power distribution. Evaluations of such critical burning process by using widely used neutron diffusion and burning codes under some realistic engineering constraints are valuable to confirm the technical feasibility of the CANDLE concept and to put the idea into concrete core design. In the first part of this paper, it is discussed that whether the sustainable and stable CANDLE burning process can be reproduced even by using conventional core analysis tools such as SLAROM and CITATION-FBR. As a result, it is certainly possible to demonstrate it if the proper core configuration and initial fuel composition required as CANDLE core are applied to the analysis. In the latter part, an example of a concrete image of sodium cooled, metal fuel, 2000MWt rating CANDLE core has been presented by assuming an emerging inevitable technology of recladding. The core satisfies engineering design criteria including cladding temperature, pressure drop, linear heat rate, and cumulative damage fraction (CDF) of cladding, fast neutron fluence and sodium void reactivity which are defined in the Japanese FBR design project. It can be concluded that it is feasible to design CANDLE core by using conventional codes while satisfying some realistic engineering design constraints assuming that recladding at certain time interval is technically feasible.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Passive compact molten salt reactor (PCMSR), modular thermal breeder reactor with totally passive safety system

Design Study Passive Compact Molten Salt Reactor (PCMSR) with totally passive safety system has been performed. The term of Compact in the PCMSR name means that the reactor system is designed to have relatively small volume per unit power output by using modular and integral concept. In term of modular, the reactor system consists of three modules, i.e. reactor module, turbine module and fuel management module. The reactor module is an integral design that consists of reactor, primary and intermediate heat exchangers and passive post shutdown cooling system. The turbine module is an integral design of a multi heating, multi cooling, regenerative gas turbine. The fuel management module consists of all equipments related to fuel preparation, fuel reprocessing and radioactive handling. The preliminary calculations show that the PCMSR has negative temperature and void reactivity coefficient, passive shutdown characteristic related to fuel pump failure and possibility of using natural circulation for post shutdown cooling system.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Proper orthogonal decomposition-based spectral higher-order stochastic estimation

A unique routine, capable of identifying both linear and higher-order coherence in multiple-input/output systems, is presented. The technique combines two well-established methods: Proper Orthogonal Decomposition (POD) and Higher-Order Spectra Analysis. The latter of these is based on known methods for characterizing nonlinear systems by way of Volterra series. In that, both linear and higher-order kernels are formed to quantify the spectral (nonlinear) transfer of energy between the system's input and output. This reduces essentially to spectral Linear Stochastic Estimation when only first-order terms are considered, and is therefore presented in the context of stochastic estimation as spectral Higher-Order Stochastic Estimation (HOSE). The trade-off to seeking higher-order transfer kernels is that the increased complexity restricts the analysis to single-input/output systems. Low-dimensional (POD-based) analysis techniques are inserted to alleviate this void as POD coefficients represent the dynamics of the spatial structures (modes) of a multi-degree-of-freedom system. The mathematical framework behind this POD-based HOSE method is first described. The method is then tested in the context of jet aeroacoustics by modeling acoustically efficient large-scale instabilities as combinations of wave packets. The growth, saturation, and decay of these spatially convecting wave packets are shown to couple both linearly and nonlinearly in the near-field to produce waveforms that propagate acoustically to the far-field for different frequency combinations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Note: Dynamic strain field mapping with synchrotron X-ray digital image correlation

We present a dynamic strain field mapping method based on synchrotron X-ray digital image correlation (XDIC). Synchrotron X-ray sources are advantageous for imaging with exceptional spatial and temporal resolutions, and X-ray speckles can be produced either from surface roughness or internal inhomogeneities. Combining speckled X-ray imaging with DIC allows one to map strain fields with high resolutions. Based on experiments on void growth in Al and deformation of a granular material during Kolsky bar/gas gun loading at the Advanced Photon Source beamline 32ID, we demonstrate the feasibility of dynamic XDIC. XDIC is particularly useful for dynamic, in-volume, measurements on opaque materials under high strain-rate, large, deformation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Internal structure of the nanogratings generated inside bulk fused silica by ultrafast laser direct writing

The aim of the present work was to characterize the internal structure of nanogratings generated inside bulk fused silica by ultrafast laser processing and to study the influence of diluted hydrofluoric acid etching on their structure. The nanogratings were inscribed at a depth of 100 μm within fused silica wafers by a direct writing method, using 1030 nm radiation wavelength and the following processing parameters: E = 5 μJ, τ = 560 fs, f = 10 kHz, and v = 100 μm/s. The results achieved show that the laser-affected regions are elongated ellipsoids with a typical major diameter of about 30 μm and a minor diameter of about 6 μm. The nanogratings within these regions are composed of alternating nanoplanes of damaged and undamaged material, with an average periodicity of 351 ± 21 nm. The damaged nanoplanes contain nanopores randomly dispersed in a material containing a large density of defects. These nanopores present a roughly bimodal size distribution with average dimensions for each class of pores 65 ± 20 × 16 ± 8 × 69 ± 16 nm{sup 3} and 367 ± 239 × 16 ± 8 × 360 ± 194 nm{sup 3}, respectively. The number and size of the nanopores increases drastically when an hydrofluoric acid treatment is performed, leading to the coalescence of these voids into large planar discontinuities parallel to the nanoplanes. The preferential etching of the damaged material by the hydrofluoric acid solution, which is responsible for the pores growth and coalescence, confirms its high defect density.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗