Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Tool”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Built Environment Analysis Tool: April 2013

This documentation describes the tool development. It was created to evaluate the effects of built environment scenarios on transportation energy and greenhouse gas (GHG) emissions. This documentation also provides guidance on how to apply the tool.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

RESRAD for Radiological Risk Assessment. Comparison with EPA CERCLA Tools - PRG and DCC Calculators

The purpose of this report is two-fold. First, the risk assessment methodology for both RESRAD and the EPA’s tools is reviewed. This includes a review of the EPA’s justification for 2 using a dose-to-risk conversion factor to reduce the dose-based protective ARAR from 15 to 12 mrem/yr. Second, the models and parameters used in RESRAD and the EPA PRG and DCC Calculators are compared in detail, and the results are summarized and discussed. Although there are suites of software tools in the RESRAD family of codes and the EPA Calculators, the scope of this report is limited to the RESRAD (onsite) code for soil contamination and the EPA’s PRG and DCC Calculators also for soil contamination.

54 ENVIRONMENTAL SCIENCES↗

A Tool to Prioritize Energy Efficiency Investments

To provide analytic support of the U.S. Department of Energy's Office of the Building Technology Program (BTP), NREL developed a Microsoft Excel-based tool to provide an open and objective comparison of the hundreds of investment opportunities available to BTP. This tool uses established methodologies to evaluate the energy savings and cost of those savings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Metallurgical Failure Analysis of A2 Tool Steel Die Set from High Explosive Pellet Pressing Event

On 2 April 2018, a high explosive violent reaction (HEVR) occurred during routine pressing of a 1-in -diameter cylindrical pellet of PBX 9501 high explosive. Fragments of the die set (die body and stemples) involved in the event were sent to Sigma Division for metallurgical analysis. A handheld x-ray fluorescence alloy tester confirmed the die set material to be A2 tool steel. Light optical microscopy revealed what appear to be pre-existing flaws on the inner diameter of the die body. Scanning Electron Microscopy could neither confirm nor exclude the presence of fatigue cracking in the vicinity of these potential flaws. Energy Dispersive Spectroscopy indicated the presence of a carbon-bearing residue on fracture surfaces; nitrogen-bearing residue was also found. Optical microscopy revealed that the microstructure of the stemple and inner diameter of the die body contained large stringers and non-uniform grain size; this was distinct from the relatively clean and uniform microstructure seen at the outer diameter of the die body, and also other A2 tool steel stock (pedigree unknown and with no known connection to any HE pressing hardware) that was examined for additional comparison. Rockwell hardness testing indicated the material was heat treated properly. Metallographic analysis alone could not positively identify the root cause of the event, but, coupled with accounts provided by the operator and the successful history with the particular lot of HE involved in the event, points to ward mechanical failure of the die set due to pre -existing flaw as the most likely precipitating event. Suggestions for additional analyses and future qualification techniques are discussed.

36 MATERIALS SCIENCE↗

The Industry Energy Tool (IET): Documentation

Studies of industrial energy use typically mention the sector's heterogeneity and complexity as modelling barriers. One of the more significant impediments to analyzing and building models of U.S. industrial energy use is the lack of current, disaggregated data. The Industry Energy Tool (IET) and its foundational data addresses some of these barriers. The IET uses county-level energy data with stock turnover, energy efficiency, fuel switching, and emissions functionalities to calculate energy use and emissions from agriculture, construction, mining, and manufacturing industries from 2014 to 2050. The IET is an open-source, transparent, and flexible tool for exploring industrial sector energy and emissions scenarios. The IET takes a simplified approach to developing scenario projections of energy and emissions by allowing users to modify pre-populated inputs for achieved energy efficiency, rate of equipment stock turnover, and future penetration renewable electricity. In addition to its transparency and flexibility, the strengths of the IET lie in its geographically- and operationally-disaggregated data set. The IET's foundational data is built on energy data first calculated at the facility- and technology-level for many of the largest energy-using industries. These data are then aggregated to the county and end-use level with other publicly-available data for use in scenarios estimated by the IET.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Dynamic Contingency Analysis Tool 2.0 User Manual with Test System Examples

This document introduces Version 2 of the Dynamic Contingency Analysis Tool (DCAT) software package developed by Pacific Northwest National Laboratory and serves as a guide for using this package to conduct cascading failure simulations for the electric power system. The DCAT is an open-platform and publicly available software; it is intended to help develop applications that aim to improve the capabilities of power system planning engineers to assess the impact and likelihood of extreme contingencies and potential cascading events across their systems and interconnections. Outputs from the DCAT will support finding mitigating actions to reduce the risk of cascading outages in technically sound and effective ways. This manual provides detailed instructions on how to use this tool on multicore Windows workstations or servers. In the public version of DCAT, several improvements have been made over the previous version: (1) it was modularized; (2) a graphical user interface (GUI) was developed; (3) a new version of the MPjobs parallel processing module was incorporated; and (4) a batch-processing function was added. The features of the DCAT GUI are described, including some examples of how to use the GUI to perform simulations. A full explanation of the DCAT methodology is available in the Phase 1 report.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Puerto Rico Energy Efficiency Scenario Analysis Tool (PREESAT)

The National Renewable Energy Laboratory (NREL) developed the Puerto Rico Energy Efficiency Scenario Analysis Tool (PREESAT) to allow stakeholders to estimate the long-term aggregate electricity consumption impacts of various energy efficiency measures in Puerto Rico’s residential, commercial, and industrial sectors. PREESAT is an energy accounting framework that addresses electricity use. This report provides an overview of the tool and serves as a user manual with instructions for users.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

GeoRePORT Protocol Volume II: Geological Assessment Tool

The GeoRePORT System is based on the concept that a geothermal system can be described both in terms of the quality of the geothermal resource as it relates to the potential to extract heat (resource grade) and the progress of research and development over the lifetime of the project (project readiness level). By assessing the major characteristics of a geothermal resource and categorizing the techniques used and how well the research technique was implemented, users can report a resource grade. The resource grade covers multiple geological, technological, and socioeconomic attributes that can be compared across play types and geothermal areas. Resource grade and project readiness level are reported for three assessment categories: geological, technical, and socioeconomic. This protocol document applies to the Geologic Assessment Tool and is intended for use with an excel-based spreadsheet tool, published separately.

15 GEOTHERMAL ENERGY↗

GeoRePORT Protocol Volume III: Technical Assessment Tool

The GeoRePORT System is based on the concept that a geothermal system can be described both in terms of the quality of the geothermal resource as it relates to the potential to extract heat (resource grade) and the progress of research and development over the lifetime of the project (project readiness level). By assessing the major characteristics of a geothermal resource and categorizing the techniques used and how well the research technique was implemented, users can report a resource grade. The resource grade covers multiple geological, technological, and socioeconomic attributes that can be compared across play types and geothermal areas. Resource grade and project readiness level are reported for three assessment categories: geological, technical, and socioeconomic. This protocol document applies to the Technical Assessment Tool and is intended for use with an excel-based spreadsheet tool, published separately.

15 GEOTHERMAL ENERGY↗

Bringing Fault Detection and Diagnostics (FDD) Tools into the Mainstream: Retro Commissioning and Continuous Commissioning of HVAC and Refrigeration Systems

HVAC systems in the commercial building sector consume about 3.4 quads of energy annually. Of all the HVAC systems, packaged rooftop air–conditioning units (RTUs) provide cooling and heating for over 60 percent of the commercial building floorspace (about 90 billion ft2) in the U.S. and they are a significant source of energy consumption and peak demand. All HVAC systems suffer from faults that impact thermal comfort and increase energy consumption. There are several commercially available Automated Fault Detection and Diagnostic (AFDD) tools on the market that can detect and diagnose faults, and if those faults are corrected, can save significant national energy. However, there are multiple market barriers for these tools including lack of independent verification of their performance in the field in terms of their technical capabilities, ease of use and installation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Federal Automotive Statistical Tool: Federal Vehicle Fleet Reporting Update (Combined FedFleet/FEVAR/INTERFUEL Meeting, November 2023) [Slides]

This presentation presents an overview of coming changes to how federal agencies with motor vehicles will submit required information about the electric vehicle supply equipment (EVSE) inventory and planned deployments through the Federal Automotive Statistical Tool (FAST), as well as updates on fleet reporting in general. This presentation is intended for delivery via WebEx/GoToMeeting at the November 2023 meeting of the DOE/GSA jointly-organized combined meeting of the Federal Electric Vehicle Agency Round-table (FEVAR), FedFleet, and INTERFUEL working groups. FAST is a web-based information management tool developed and maintained by Idaho National Laboratory and funded by GSA's Office of Government-wide Policy and DOE's Federal Energy Management Program.

33 ADVANCED PROPULSION SYSTEMS↗

Federal Automotive Statistical Tool: Updates to EVSE Reporting (Federal Electric Vehicle Agency Round-table, October 2023) [Slides]

This presentation presents an overview of coming changes to how federal agencies with motor vehicles will submit required information about the electric vehicle supply equipment (EVSE) inventory and planned deployments through the Federal Automotive Statistical Tool (FAST). This presentation is intended for delivery via WebEx/GoToMeeting at the October 2023 meeting of the DOE-organized Federal Electric Vehicle Agency Round-table (FEVAR). FAST is a web-based information management tool developed and maintained by Idaho National Laboratory and funded by GSA's Office of Government-wide Policy and DOE's Federal Energy Management Program.

33 ADVANCED PROPULSION SYSTEMS↗

Federal Automotive Statisical Tool: FAST Changes & Data Call Preparation (INTERFUEL - September 2023) [Slides]

This presentation presents an overview of and timeline for coming changes to how federal agencies with motor vehicles will submit required information about the motor vehicles, fueling centers, and electric vehicle supply equipment (EVSE) inventory through the Federal Automotive Statistical Tool (FAST). The presentation provides information on changes throughout the FAST system as well as changes planned for implementation in FY 2023 and later. This presentation is intended for delivery via WebEx/GoToMeeting at the September 13, 2023 meeting of the DOE-sponsored INTERFUEL working group. FAST is a web-based information management tool developed and maintained by Idaho National Laboratory and funded by GSA's Office of Government-wide Policy and DOE's Federal Energy Management Program.

33 ADVANCED PROPULSION SYSTEMS↗

Overview of Tools to Provide Support for State Energy Programs [Slides]

This "Overview of Tools to Provide Support for State Energy Programs?" is a resource to support technical assistance programs, specifically motivated by the State Energy Program Direct TA program under SCEP at the Department of Energy. It provides a general description of seven unique tools - six by NREL, one by Argonne National Lab - which may be used to benefit state energy offices either through direct use (by state offices) or through contracted support (by national lab staff via TA programs).

97 MATHEMATICS AND COMPUTING↗

Electric Vehicle Charging Analytics and Reporting Tool (EV-ChART): Data Format and Preparation Guidance (V.5.0)

The Joint Office of Energy and Transportation maintains the Electric Vehicle Charging Analytics and Reporting Tool (EV-ChART), which provides a centralized hub for submitting electric vehicle (EV) charging infrastructure data directed by the Federal Highway Administration (23 CFR 680.112(a)-(c)). EV-ChART provides a streamlined data submission process and an integrated set of analytic tools, connects to other data sources, and empowers data sharing and access across stakeholders, including the public. Any data shared publicly will be aggregated and anonymized to stay in accordance with 23 CFR 680. This EV-ChART Data Format and Preparation Guidance provides a comprehensive overview of the data reporting requirements as authorized under 23 CFR 680.112(a)-(c)). The guidance is intended to be used alongside the EV-ChART Data Input Template, which defines the tabular data structure that these data submissions must follow. Per 23 CFR 680.112(a)-(c), the annual and quarterly data submissions are required of all National Electric Vehicle Infrastructure (NEVI) Formula Program projects, as well as projects for the construction of publicly accessible EV chargers that are funded with funds made available under Title 23, United States Code, including any EV charging infrastructure project funded with federal funds that is treated as a project on a federal-aid highway. One-time data submissions are required of both the NEVI Formula Program projects and grants awarded under 23 U.S.C. 151(f) for projects that are for EV charging stations located along and designed to serve the users of designated Alternative Fuel Corridors (AFCs). Other information and data required in 23 CFR 680, such as 23 CFR 680.112(d), 23 CFR 680.116(c), and 23 CFR 680.106(a), are not discussed in this guidance.

33 ADVANCED PROPULSION SYSTEMS↗

NREL Tools Webinar Series: Session 1 - Overview

Webinar with NARC/Solsmart to showcase NREL tools related to energy with local governments interested in Solsmart designation. NREL staff will present on SAM, PV Watts, REopt, Procurement Analysis Tool, Slope, SolarAPP+, and SolarTRACE.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Modulated Tool-Path (MTP) Chip Breaking System

The Modulated Tool-Path (MTP) Chip Breaking System produces user-selectable chip lengths and workpiece finishes and is compatible with any material, workpiece shape, and depth of cut. The MTP chip breaking system consistently creates the desired size of chips regardless of workpiece size, shape, or material, and the machine operator does not need to make any adjustments during the machining operation. The system's programmer configures the part program that commands the machine tool to move in a specific fashion to deliver the desired part size, shape, chip length, and workpiece surface finish. The MTP chip breaking system helps manufacturers avoid the detrimental effects of continuous chips, including expensive repair costs, delivery delays, and hazards to personnel.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

The New Modularization Framework for the FAST Wind Turbine CAE Tool

NREL has recently put considerable effort into improving the overall modularity of its FAST wind turbine aero-hydro-servo-elastic tool to (1) improve the ability to read, implement, and maintain source code; (2) increase module sharing and shared code development across the wind community; (3) improve numerical performance and robustness; and (4) greatly enhance flexibility and expandability to enable further developments of functionality without the need to recode established modules. The new FAST modularization framework supports module-independent inputs, outputs, states, and parameters; states in continuous-time, discrete-time, and in constraint form; loose and tight coupling; independent time and spatial discretizations; time marching, operating-point determination, and linearization; data encapsulation; dynamic allocation; and save/retrieve capability. This paper explains the features of the new FAST modularization framework, as well as the concepts and mathematical background needed to understand and apply it correctly. It is envisioned that the new modularization framework will transform FAST into a powerful, robust, and flexible wind turbine modeling tool with a large number of developers and a range of modeling fidelities across the aerodynamic, hydrodynamic, servo-dynamic, and structural-dynamic components.

17 WIND ENERGY↗