Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THREAT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Helium diffusivity in oxide nuclear fuel: Critical data analysis and new correlations

Helium is relevant in determining nuclear fuel behaviour. It affects the performance of nuclear fuel both in reactor and in storage conditions. Helium becomes important in reactor conditions when high burnups are targeted or MOX fuel is used, whereas for storage conditions it can represent a threat to the fuel rods integrity. The accurate knowledge of helium behaviour combined with predictive model capabilities is fundamental for the safe management of nuclear fuel, with helium diffusivity being a critical property. For this reason, a considerable number of separate effect experiments in the last fifty years investigated helium diffusivity in nuclear fuel. The aim of this work is to critically review and assess the experimental results concerning the helium diffusivity. Experimental results are critically analysed in terms of the helium introduction technique used (either infusion, implantation or doping) and of sample characteristics (single crystal, poly-crystal or powder). Accordingly, we derived two different correlations for the diffusivity. Clearly, each of the new correlations corresponds to a limited range of application conditions, depending on the experimental data used to derive it. We provide recommendations regarding the proper application conditions for each correlation (e.g., in reactor or storage conditions).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Accelerating nuclear-integrated data center pursuits in the USA: SWOT analysis, power-thermal management strategies and demonstration plan

Here, this study explores the increasing interest in leveraging nuclear power to meet the escalating energy demands of data centers in the United States (U.S.) by focusing on key factors that contribute to accelerated deployment. The study highlights the importance of N+1/N+2 power supplies (where N is the required number of units), outlines research and innovations in nuclear-integrated data center thermal management and demonstration plan. It also provides updates about status and costing of various reactor system designs. A summarized strengths, weaknesses, opportunities, and threats (SWOT) analysis shows the potential options for grid connectivity, reactors, and site selection. Suitable site discussions consider land and water availability, grid access, and optical fiber connectivity, and the study presents graded prospects for Department of Energy (DOE) sites with a specific example. Community engagement and partnerships are emphasized, particularly the roles of local government, federal agencies, utilities, and data center industry partners, which are crucial for accelerating deployment, business outreach, and approvals. The study provides actionable insights for stakeholders to accelerate the deployment of nuclear-powered data centers.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗

A hybrid chemical-biological approach can upcycle mixed plastic waste with reduced cost and carbon footprint

Derived from renewable feedstocks, such as biomass, polylactic acid (PLA) is considered a more environmentally friendly plastic than conventional petroleum-based polyethylene terephthalate (PET). However, PLA must still be recycled, and its growing popularity and mixture with PET plastics at the disposal stage poses a cross-contamination threat in existing recycling facilities and results in low-value and low-quality recycled products. Hybrid upcycling has been proposed as a promising sustainable solution for mixed plastic waste, but its techno-economic and life cycle environmental performance remain understudied. We propose a hybrid upcycling approach using a biocompatible ionic liquid (IL) to first chemically depolymerize plastics and then convert the depolymerized stream via biological upgrading with no extra separation. Here we show that over 95% of mixed PET/PLA was depolymerized into the respective monomers, which then served as the sole carbon source for the growth of Pseudomonas putida, enabling the conversion of the depolymerized plastics into biodegradable polyhydroxyalkanoates (PHAs). In comparison to conventional commercial PHAs, the estimated optimal production cost and carbon footprint are reduced by 62% and 29%, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Wildfires increasingly threaten oil and gas wells in the western United States with disproportionate impacts on marginalized populations

The western United States is home to most of the nation’s oil and gas production and, increasingly, wildfires. Here, we examined historical threats of wildfires for oil and gas wells, the extent to which wildfires are projected to threaten wells as climate change progresses, and exposure of human populations to these wells. From 1984 to 2019, we found that, cumulatively, 102,882 wells were located in wildfire burn areas, and 348,853 people were exposed (resided within ≤ 1 km). During this period, we observed a 5-fold increase in the number of wells in wildfire burn areas and a doubling of the population within 1 km of these wells. These trends are projected to increase by late century, likely threatening human health. Approximately 2.9 million people reside within 1 km of wells in areas with high wildfire risk, and Black, Hispanic, and Native American people have disproportionately high exposure to wildfire-threatened wells.

02 PETROLEUM↗

Hydrogen-fueled internal combustion engines.

The threat posed by climate change and the striving for security of energy supply are issues high on the political agenda these days. Governments are putting strategic plans in motion to decrease primary energy use, take carbon out of fuels and facilitate modal shifts. Taking a prominent place in these strategic plans is hydrogen as a future energy carrier. A number of manufacturers are now leasing demonstration vehicles to consumers using hydrogen-fueled internal combustion engines (H{sub 2}ICEs) as well as fuel cell vehicles. Developing countries in particular are pushing for H{sub 2}ICEs (powering two- and three-wheelers as well as passenger cars and buses) to decrease local pollution at an affordable cost. This article offers a comprehensive overview of H{sub 2}ICEs. Topics that are discussed include fundamentals of the combustion of hydrogen, details on the different mixture formation strategies and their emissions characteristics, measures to convert existing vehicles, dedicated hydrogen engine features, a state of the art on increasing power output and efficiency while controlling emissions and modeling.

08 HYDROGEN↗

The Los Alamos Neutron Science Center Spallation Neutron Sources

The Los Alamos Neutron Science Center (LANSCE) provides the scientific community with intense sources of neutrons, which can be used to perform experiments supporting civilian and national security research. These measurements include nuclear physics experiments for the defense program, basic science, and the radiation effect programs. This paper focuses on the radiation effects program, which involves mostly accelerated testing of semiconductor parts. When cosmic rays strike the earth's atmosphere, they cause nuclear reactions with elements in the air and produce a wide range of energetic particles. Because neutrons are uncharged, they can reach aircraft altitudes and sea level. These neutrons are thought to be the most important threat to semiconductor devices and integrated circuits. The best way to determine the failure rate due to these neutrons is to measure the failure rate in a neutron source that has the same spectrum as those produced by cosmic rays. Los Alamos has a high-energy and a low-energy neutron source for semiconductor testing. Both are driven by the 800-MeV proton beam from the LANSCE accelerator. The high-energy neutron source at the Weapons Neutron Research (WNR) facility uses a bare target that is designed to produce fast neutrons with energies from 100 keV to almost 800 MeV. The measured neutron energy distribution from WNR is very similar to that of the cosmic-ray-induced neutrons in the atmosphere. However, the flux provided at the WNR facility is typically 5×107 times more intense than the flux of the cosmic-ray-induced neutrons. This intense neutron flux allows testing at greatly accelerated rates. An irradiation test of less than an hour is equivalent to many years of neutron exposure due to cosmic-ray neutrons. The low-energy neutron source is located at the Lujan Neutron Scattering Center. It is based on a moderated source that provides useful neutrons from subthermal energies to ~100 keV. The characteristics of these sources, and ongoing industry program are described in this paper.

07 ISOTOPE AND RADIATION SOURCES↗

Connecting radiation-driven changes in structural, thermal, and mechanical properties in several medical device polymers

Stemming from security threats and shortages in supply, a recent push has emerged to develop alternatives to radioisotope Cobalt-60 gamma radiation for sterilization of polymeric medical products, including electron beam (e-beam) and X-ray machine-based sources. However, before large-scale implementation, the effects of these non-isotope-based methods must be thoroughly investigated from several perspectives, involving their potential detrimental effects on the structural, thermal, and mechanical properties of polymers in medical devices. This paper investigates such effects in commonly used medical device polymers, including polypropylene homopolymer (PPH), polyolefin elastomer (POE), low-density polyethylene (LDPE), acrylonitrile butadiene styrene (ABS), and chlorobutyl rubber (CIIR). To connect radiation-driven changes in polymer structural and thermal properties and corresponding changes in mechanical properties, several characterization techniques were utilized, including gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FTIR), dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC). We found that the tensile strength of X-ray irradiated PPH, as well as X-ray, e-beam, and gamma irradiated CIIR decreases due to chain scission, which is corroborated by GPC and DMA. The GPC results of LDPE suggest chain scission, but interestingly without a corresponding decline in tensile strength. By comparison, POE and ABS appear to undergo further crosslinking with increasing irradiation dose, which generally strengthens them. Importantly, in the vast majority of the cases, there were small to no changes in properties upon changing radiation technologies (at a given dose), i.e., no radiation source dependence. However, in a few specific cases, radiation method dependencies did arise, for instance, in terms of the molecular weight of PPH being significantly increased upon X-ray irradiation, while the melting temperature, glass transition temperature, and elongation at break reduced compared to gamma. Overall, this study provides valuable insight into radiation-driven chemical and structural changes in polymers that produce changes in physical and functional properties.

36 MATERIALS SCIENCE↗

Bacteria-mediated dsRNA delivery for mosquito-borne virus control

Mosquito-borne viruses represent an increasing global public health threat, exacerbated by urbanisation and climate change, thus making effective mosquito control essential. RNA interference (RNAi), a sequence-specific gene regulation mechanism, can be a flexible vector control tool. RNAi effectors, such as double-stranded RNA (dsRNA), can target mosquito genes or the viruses they carry, disrupting development or suppressing infection. However, current RNAi delivery methods are ineffective. Engineered bacterial symbionts offer a promising alternative for delivery, as they can produce dsRNA directly within mosquitoes. However, bacterial RNAi delivery in mosquitoes remains underexplored. We review emerging genetic tools, insights from RNAi and bacteria–mosquito interactions to outline priorities for realising bacterial RNAi as an efficient and sustainable vector control strategy.

Biological and medical sciences↗

Indirect Estimation of Radioactivity in Containerized Cargo

Detecting illicit nuclear and radiological material in containerized cargo challenges the state of the art in detection systems. Current systems are being evaluated and new systems envisioned to address the need for the high probability of detection and extremely low false alarm rates necessary to thwart potential threats and extremely low nuisance and false alarm rates while maintaining necessary to maintain the flow of commerce impacted by the enormous volume of commodities imported in shipping containers. Maintaining flow of commerce also means that primary inspection must be rapid, requiring relatively indirect measurements of cargo from outside the containers. With increasing information content in such indirect measurements, it is natural to ask how the information might be combined to improved detection. Toward this end, we present an approach to estimating isotopic activity of naturally occurring radioactive material in cargo grouped by commodity type, combining container manifest data with radiography and gamma spectroscopy aligned to location along the container. The heart of this approach is our statistical model of gamma counts within peak regions of interest, which captures the effects of background suppression, counting noise, convolution of neighboring cargo contributions, and down-scattered photons to provide physically constrained estimates of counts due to decay of specific radioisotopes in cargo alone. Coupled to that model, we use a mechanistic model of self-attenuated radiation flux to estimate the isotopic activity within cargo, segmented by location within each container, that produces those counts. We demonstrate our approach by applying it to a set of measurements taken at the Port of Seattle in 2006. This approach to synthesizing disparate available data streams and extraction of cargo characteristics holds the potential to improve primary inspection using current detection capabilities and to enable simulation-based evaluation of new candidate detection systems.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Analysis of incentive policies for phosphorus recovery at livestock facilities in the Great Lakes area

Livestock operations have been highly intensified over the last decades, resulting in the advent of large concentrated animal feeding operations (CAFOs). Intensification decreases production costs but also leads to substantial environmental impacts. Specifically, nutrient runoff from livestock waste results in eutrophication, harmful algal blooms, and hypoxia. The implementation of nutrient recovery systems in CAFOs can abate nutrient releases and negative ecosystem responses, although they might negatively affect the economic performance of CAFOs. We design and analyze potential incentive policies for the deployment of phosphorus recovery technologies at CAFOs considering the geospatial vulnerability to nutrient pollution. The case study demonstration consists of 2217 CAFOs in the U.S. Great Lakes area. The results reveal that phosphorus recovery is more economically viable in the largest CAFOs due to economies of scale, although they also represent the largest eutrophication threats. For small and medium-scale CAFOs, phosphorus credits progressively improve the profitability of nutrient management systems. The integration of biogas production does not improve the economic performance of phosphorus recovery systems at most of CAFOs, as they lack enough size to be cost-effective. Furthermore, phosphorus recovery proves to be economically beneficial by comparing the net costs of nutrient management systems with the negative economic impact derived from phosphorus releases. The incentives necessary for avoiding up to 20.7.10 3 ton/year phosphorus releases and achieve economic neutrality in the Great Lakes area are estimated at $223 million/year. Additionally, the fair distribution of limited incentives is studied using a Nash allocation scheme, determining the break-even point for allocating monetary resources.

54 ENVIRONMENTAL SCIENCES↗

An investigation of hard-disk drive circularity accounting for socio-technical dynamics and data uncertainty

The installed data storage capacity in the U.S. will reach 2.2 Zettabytes by 2025, generating about 50 million units of end-of-life (EOL) hard-disk drives (HDDs) per year. Due to data security concerns, most EOL HDDs are currently shredded (even when still functioning), representing an economic loss. Moreover, raw material extraction linked to the increased demand for storage causes environmental impacts. Besides mitigating the threat posed by sudden restrictions of raw materials, the circular economy (CE) offers to maximize value retention in the economy and reduce the environmental impacts of human activities. Common CE strategies are reusing and recycling products. However, the reuse of hard disk drives is currently burdened by the lack of trust HDD end-users have toward other non-physical means of data removal than shredding. Here, an agent-based modeling (ABM) approach is proposed to explore how techno-economic and social factors affect end-users' decisions to adopt EOL management practices other than shredding. The proposed method also accounts for data uncertainty by applying a semi-quantitative approach. Results demonstrate how increased green procurement and more robust standards could spur end-users' trust toward data-wiping technologies. Even when accounting for uncertainty, HDDs' reuse brings better environmental and economic benefits than HDD shredding followed by material recovery. The semi-quantitative approach proposed in this study could be more universally applied in future ABM, especially given the often-stochastic nature of such models. The developed ABM is also the first to represent several HDD industry stakeholders and demonstrate how the HDD shredding lock-in situation could be resolved.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Cyber–physical vulnerability and resiliency analysis for DER integration: A review, challenges and research needs

High penetration of renewable and sustainable Distributed Energy Resources (DER) into the traditional distribution system requires a well-coordinated control strategy for the improvement of system-wide reliability and resiliency. Implementation of such a holistic control architecture requires a flexible, near real-time, and bi-directional communication framework for facilitating the participation of various agents in a multi-vendor heterogeneous smart grid. While the sustainability of energy generation is ensured, this exposes the smart grid to extrinsic cyber threats, and appropriate defense mechanism(s) must be deployed to guarantee continued reliability and resiliency of the power grid. Further, the comprehensive literature review presented in this paper discusses the latest trends in the DER control schemes with fast communication requirements and their accompanying cyber–physical vulnerabilities. These control schemes are compared and contrasted for various traits. A three-level DER system architecture has been depicted, facilitating the deployment of these control schemes. The current developments of standard communication protocols, key security mechanisms, and best practices along major standards and guidelines are explored. The impacts of different attack types with miscellaneous DER functions based on various control schemes and associated mitigation solutions are also provided. Finally, challenges and future research directions for limiting cyber-power susceptibility to enhance resiliency are summarized. The work presented here will help us enabling a cyber-resilient and sustainable smart electric grid.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Impacts of photovoltaic solar energy on soil carbon: A global systematic review and framework

Globally, solar energy is anticipated to be the primary source of electricity as early as 2050, and the greatest additions in capacity are currently in the form of large, ground-mounted photovoltaic solar energy facilities (GPVs). Growing interest lies in understanding and anticipating opportunities to increase soil carbon sequestration across the footprint and perimeter of both conventional and multi-use GPVs (e.g., ecovoltaics, agrivoltaics, and rangevolatics), especially as operators increasingly deputize as land managers. To date, studies on the relationship between soils and PV solar energy are limited to unique, localized sites. This study employed a systematic review to (i) identify a global corpus of 18 studies on interactions between GPVs and soils, (ii) collect and characterize 113 soil and soil-related experimental variables interacting with GPVs from this corpus, and (iii) synthesize trends among these experimental variables. Next, this study combined data from the systematic review with an iterative, knowledge co-production approach to produce a conceptual model for the study of soil and GPV interactions that applies to multiple installation types, scales, and contexts where GPVs are deployed, and identified research opportunities, threats, and priorities. This study's baseline understanding, conceptual model, and co-produced knowledge confer unique insight into the feasibility of combining soil carbon sequestration with the climate change mitigation potential of PV solar energy.

agrivoltaics↗

Spatiotemporal patterns of livestock manure nutrient production in the conterminous United States from 1930 to 2012

Manure nitrogen (N) and phosphorus (P) from livestock husbandry are important components of terrestrial biogeochemical cycling. Assessment of the impacts of livestock manure on terrestrial biogeochemistry requires a compilation and analysis of spatial and temporal patterns of manure nutrients. In this study, we reconstructed county-level manure nutrient data of the conterminous United States (U.S.) in 4- to 5-year increments from 1930 to 2012. Manure N and P were 5.89 +/- 0.64 Tg N yr.(-1) (Mean +/- Standard Deviation) and 1.73 +/- 0.29 Tg P yr.(-1) (1 Tg=10(12) g), and increased by 46% and 92% from 1930 to 2012, respectively. Prior to 1970, manure provided more N to the U.S. lands than chemical fertilizer use. Since 1970, however, increasing chemical N fertilizer use has exceeded manure N production. Manure was the primary P source in the U.S. during 1930-1969 and 1987-2012, but was lower than P fertilizer use in 1974, 1978, and 1982. High-nutrient-production regions shifted towards eastern and western areas of the U.S. Decreasing small farms and increasing Concentrated Animal Feeding Operations (CAFOs) induced concentrated spatial patterns in manure nutrient loads. Counties with cattle or poultry as the primary manure nutrient contributors expanded significantly from 1930 to 2012, whereas regions with sheep and hog as the primary contributors decreased. We identified regions facing environmental threats associated with livestock farming. Effective management of manure should consider the impacts of CAFOs inmanure production, and changes in livestock population structure. The long-term county-level manure nutrient dataset provides improved spatial and temporal information on manure nutrients in the U.S. This dataset is expected to help advance research on nutrient cycling, ammonia volatilization, greenhouse gas (GHG) emissions from livestock husbandry, recovery and reuse of manure nutrients, and impacts of livestock feeding on human health in the context of global change.

Livestock↗

A pathway of global food supply adaptation in a world with increasingly constrained groundwater

Many of the world’s major freshwater aquifers are being exploited unsustainably, with some projected to approach environmentally unsafe drawdown limits within the 21st century. Given that aquifer depletion tends to occur in important crop producing regions, the prospect of running dry poses a significant threat to global food security. Here we use the Global Change Assessment Model (GCAM) to explore the response of land use and agriculture sectors to severe constraints on global water resources. We simulate a scenario in which a number of important groundwater aquifers become depleted beyond environmental or economically viable drawdown limits within the 21st century. Results are then benchmarked against scenario that neglects constraints on water extractions. We find that groundwater depletion and associated water price increases drive two distinct responses in the agriculture sector: an expansion of rain fed agriculture, and a shift in irrigated crop production toward regions with cheaper water resources. Losses in crop production are most pronounced in water stressed regions where groundwater is being depleted unsustainably to meet irrigation demands—namely northwest India, Pakistan, the Middle East, western United States, Mexico, and Central Asia. While these results highlight substantial risks for the affected regional agricultural economies, we show that modest changes in irrigation and location of crop growth could ensure global food demands are met despite severe water constraints.

Turner, Sean WD↗

Nickel and iron partitioning between clay minerals, Fe-oxides and Fe-sulfides in lagoon sediments from New Caledonia

In the tropics, continental weathering and erosion are major sources of trace metals towards estuaries and lagoons, where early diagenesis of sediments may influence their mobility and bioavailability. Determining trace metals speciation in tropical sedimentary settings is thus needed to assess their long-term fate and potential threat to fragile coastal ecosystems. In this study, we determined Fe, Ni and S speciation across a shore-to-reef gradient in sediments from the New Caledonia lagoon that receive mixed contribution from lateritic (iron-oxyhydroxides and clay minerals), volcano-sedimentary (silicates) and marine (carbonate) sources. Sulfur K-edge XANES data indicated a major contribution of pyrite (FeS 2 ) to S speciation close to the shore. However, this contribution was found to dramatically decrease across the shore-to-reef gradient, S mainly occurring as sulfate close to the coral reef. In contrast, Fe and Ni K-edge XANES and EXAFS data indicated a minor contribution of pyrite to Fe and Ni speciation, and this contribution could be evidenced only close to the shore. The major fractions of Fe and Ni across the shore-to-reef gradient were found to occur as Ni- and Fe-bearing clay minerals consisting of smectite (~nontronite), glauconite and two types of serpentines (chrysotile and greenalite/berthierine). Among these clay minerals, greenalite/berthierine, glauconite and possibly smectite, were considered as authigenic. The low contribution of pyrite to trace metals speciation compared to clay minerals is interpreted as a result of (1) a reduced formation rate due to the low amounts of organic carbon compared to the Fe pool and (2) repeated re-oxidation events upon re-suspension of the sediments top layers due to the specific context of shallow lagoon waters. This study thus suggests that green clay authigenesis could represent a key process in the biogeochemical cycling of trace metals that are delivered to lagoon ecosystems upon continental erosion and weathering.

54 ENVIRONMENTAL SCIENCES↗

Arsenic stabilization performance of a novel starch-modified Fe-Mn binary oxide colloid

Arsenic (As) is an environmentally hazardous contaminant and can be a serious threat to human health. In China, remediation needs for a large number of As-contaminated sites renders a strong demand for efficient remedial reagents and cost effective approaches. In this study, a novel starch-modified Fe-Mn binary oxide (SFM), an amorphous colloidal material, has been synthesized as a remedial reagent and its As stabilization performance has been evaluated. A set of laboratory batch experiments were carried out by directly adding SFM of different dosages into three contaminated soils. Results demonstrated that SFM could transform As in soil from non-specifically and specifically sorbed fractions to the more stable form bounded to amorphous iron hydrous oxides, thus reducing the As concentration in TCLP leachates by 42.0-93.2%. Results from adsorption tests and microscopic analysis indicated that the interactions between SFM and As are mainly controlled by adsorption, oxidation, and precipitation processes. SFM has abundant surface hydroxyl groups, with excellent adsorption properties for both As(V) and As(III), with the maximum adsorption capacities of 160.63 and 284.64 mg/g respectively at pH 7.0. The adsorption process closely fitted pseudo second-order kinetics and Freundlich isotherm model. SFM could increase soil Eh and oxidize As(III) to As(V), which facilitated the As stabilization in soilColloidal iron-based material directly used for stabilization in As contaminated soils is reported here for the first time. Starch modification improves both the reactivity and mobility of SFM in soil. Our findings propose an efficient and convenient reagent for As remediation in soil.

Yan, Xiulan↗

Contrasting changes in ozone during 2019–2021 between eastern and the other regions of China attributed to anthropogenic emissions and meteorological conditions

Ozone pollution is one of the most severe air quality issues in China that poses a serious threat to human health and ecosystems. During 2019–2021, the maximum daily 8-h average ozone concentrations in eastern China (110–122.5°E, 26–42°N) and the rest of China (ROC) show different decreasing patterns, with ozone concentrations in eastern China decreasing by 14.9 μg/m 3 , which is much larger than 4.8 μg/m 3 in ROC. Here, based on two independent methods, the atmospheric chemical transport model (GEOS-Chem) simulations and the machine learning (ML) model (LightGBM) predictions, the reasons for the differences in ozone changes between eastern China and ROC during the warm season (April to September) are investigated. According to the GEOS-Chem (LightGBM) results, changes in the meteorological conditions contributed to an ozone decrease by 7.3 (6.8) μg/m 3 in eastern China due to decreased chemical production and an ozone decrease by 6.8 (7.0) μg/m 3 in ROC attributed to the weakened horizontal and vertical advection. With the influence of meteorological factors excluded, the observations show that changes in anthropogenic emissions resulted in an ozone decrease by 7.6 (8.1) μg/m 3 in eastern China and an ozone increase by 2.0 (2.2) μg/m 3 in ROC, which is primarily induced by the changes in NO x emissions. The surface measurements and satellite retrievals also indicate that the reduction in NO x emissions in ROC is less efficient than that in the more developed eastern China, leading to contrasting changes in ozone concentrations between eastern China and ROC during 2019–2021. In conclusion, our results highlight the critical need to reduce ozone precursor emissions in the rest regions of China apart from eastern China.

54 ENVIRONMENTAL SCIENCES↗