Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surrogate Models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Passive Neutron Non-Destructive Assay for Remediation of Radiological Waste at Hanford Burial Grounds- 13189

The Hanford burial grounds contains a broad spectrum of low activity radioactive wastes, transuranic (TRU) wastes, and hazardous wastes including fission products, byproduct material (thorium and uranium), plutonium and laboratory chemicals. A passive neutron non-destructive assay technique has been developed for characterization of shielded concreted drums exhumed from the burial grounds. This method facilitates the separation of low activity radiological waste containers from TRU waste containers exhumed from the burial grounds. Two identical total neutron counting systems have been deployed, each consisting of He-3 detectors surrounded by a polyethylene moderator. The counts are processed through a statistical filter that removes outliers in order to suppress cosmic spallation events and electronic noise. Upon completion of processing, a 'GO / NO GO' signal is provided to the operator based on a threshold level equivalent to 0.5 grams of weapons grade plutonium in the container being evaluated. This approach allows instantaneous decisions to be made on how to proceed with the waste. The counting systems have been set up using initial on-site measurements (neutron emitting standards loaded into surrogate waste containers) combined with Monte Carlo modeling techniques. The benefit of this approach is to allow the systems to extend their measurement ranges, in terms of applicable matrix types and container sizes, with minimal interruption to the operations at the burial grounds. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A combustion model for IC engine combustion simulations with multi-component fuels

Reduced chemical kinetic mechanisms for the oxidation of representative surrogate components of a typical multi-component automotive fuel have been developed and applied to model internal combustion engines. Starting from an existing reduced mechanism for primary reference fuel (PRF) oxidation, further improvement was made by including additional reactions and by optimizing reaction rate constants of selected reactions. Using a similar approach to that used to develop the reduced PRF mechanism, reduced mechanisms for the oxidation of n-tetradecane, toluene, cyclohexane, dimethyl ether (DME), ethanol, and methyl butanoate (MB) were built and combined with the PRF mechanism to form a multi-surrogate fuel chemistry (MultiChem) mechanism. The final version of the MultiChem mechanism consists of 113 species and 487 reactions. Validation of the present MultiChem mechanism was performed with ignition delay time measurements from shock tube tests and predictions by comprehensive mechanisms available in the literature. A combustion model was developed to simulate engine combustion with multi-component fuels using the present MultiChem mechanism, and the model was applied to simulate HCCI and DI engine combustion. The results show that the present multi-component combustion model gives reliable performance for combustion predictions, as well as computational efficiency improvements through the use of reduced mechanism for multi-dimensional CFD simulations. (author)

33 ADVANCED PROPULSION SYSTEMS↗

Cardiovascular Disease Spaceflight Equivalent Stressor Risk Modeling Project

The risk of cardiovascular disease (CVD) may be exacerbated by spaceflight hazards including radiation, isolation, distance from the Earth, gravity fields, and closed or confined environments. This project aims to use epidemiologic, scientific research evidence of surrogate spaceflight stressors on analog populations in terrestrial cohorts to model CVD risk for spaceflight conditions. To date, Dr. Butler and the multi-disciplinary CVD Spaceflight Equivalent Stressors (SES) team have conducted a formal systematic literature review on the risk of sleep loss as it relates to cardiovascular disease outcomes and are currently working on a meta-analysis for the data gathered from nearly 100 studies and their various CVD outcomes. The research will continue to examine other surrogate stressors in depth, such as altered gravity, radiation exposure, noise, etc. with cardiovascular outcomes to determine an overall combined spaceflight risk for long term future missions such as Artemis Lunar and Mars missions.

Jennifer Butler↗

Thermal Experiments for Fractured Rock Characterization: Theoretical Analysis and Inverse Modeling

Abstract Field‐scale properties of fractured rocks play a crucial role in many subsurface applications, yet methodologies for identification of the statistical parameters of a discrete fracture network (DFN) are scarce. We present an inversion technique to infer two such parameters, fracture density and fractal dimension, from cross‐borehole thermal experiments data. It is based on a particle‐based heat‐transfer model, whose evaluation is accelerated with a deep neural network (DNN) surrogate that is integrated into a grid search. The DNN is trained on a small number of the heat‐transfer model runs and predicts the cumulative density function of the thermal field. The latter is used to compute fine posterior distributions of the (to be estimated) parameters. Our synthetic experiments reveal that fracture density is well constrained by data, while fractal dimension is harder to determine. Adding nonuniform prior information related to the DFN connectivity improves the inference of this parameter.

Zhou, Zitong↗

Reactor physics benchmark of Westinghouse PWR core design suite for high burnup/high enrichment fuel - Part 2: 2D and 3D core simulations

Westinghouse has performed a comprehensive set of code-to-code benchmark comparisons to corroborate application of its state-of-the-art NEXUS-based code suite to high burnup and high enrichment (HB/HE) fueled PWR core design and reload analysis. The benchmark consisted of a progression in complexity from modeling single 2D pin cells, through 2D lattices and finally to whole core 2D and then 3D scenarios. The accompanying paper (Part 1) presented the results for a variety of pin cell and lattices representative of high energy cores and established the ability of the MPACT code to accurately match the predictions of the Monte-Carlo code SERPENT2 such that the former may be used as a surrogate reference code in spatially complex whole core modeling applications where using Monte-Carlo methods is somewhat impractical. This paper focuses on comparisons at the whole core level using a representative high power density 3-loop Westinghouse NSSS core operating for 24 month cycles employing high enriched fuel with use of combined burnable absorbers to hold down excess reactivity. The evolution of the core reactivity and power distribution characteristics throughout the cycle are calculated using the Westinghouse NEXUS-based code suite and compared to the results using MPACT. The results of this whole core benchmark confirm the conclusions that the Westinghouse code suite accurately models HB/HE fuel designs, with very good prediction of core reactivity and power distribution throughout the cycle. The industry can be confident that the NEXUS code system can be deployed to support PWR reload safety and operational analyses for cores featuring HB/HE fuel and 24-month cycle operation. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Isotherm Modeling and Techno-Economic Analysis of Contactor Technologies for New Tetraamine-Appended MOF for NGCC Applications

Recently, a family of tetraamine-functionalized metal-organic frameworks (MOF) has been reported as promising sorbent materials for capturing CO2 from flue gas conditions relevant to natural gas combined cycle (NGCC) applications. The main advantages of these materials are their two-step cooperative CO2 adsorption, which gives rise to unusual two step-shaped CO2 adsorption profiles and their high thermal stability. This work presents the modelling of the two-transition isotherm of the tetraamine-appended MOF, N,N'-bis(3-aminopropyl)-1,4-diaminobutane (3-4-3)-appended Mg2(dobpdc), and the techno-economic analysis (TEA) of carbon capture processes utilizing this sorbent. Due to the unusual isotherm shapes of the experimental CO2 adsorption data for tetraamine-appended Mg2(dobpdc) and the strong nonlinearity of CO2 loading with respect to temperature and pressure, we tested two different models which use logistic functions for representing the different isotherm behaviors in the different pressure ranges. The first model uses the quadratic isotherm model in the low-pressure region, the Langmuir isotherm model in the middle pressure range, and the dual site Langmuir isotherm model in the high-pressure range. To model the transition between regions we used the arctangent functions independent of temperature and the thermal effect was accounted by using the Clausius-Clapeyron relation]. The second model is an extension of the weighted dual-site Langmuir isotherm model presented by Hughes et al.. In this extended model, the dual-site Langmuir isotherm is employed in the three transition regions, using temperature-dependent logistic functions to activate or deactivate the isotherm model in the low, middle, and high-pressure ranges. Both models fit the experimental data quite well with root mean squared errors (RMSE’s) of 0.41 and 0.17 for model 1 and model 2, respectively. Since model 2 resulted in a lower RMSE, it was leveraged for the development of the gas/solid contactor models used by the TEA. Specifically, two different contactor models, an axial-flow fixed bed and moving bed contactor, were developed as part of this work. These models are dynamic, pressure-driven, and consist of mass, energy, and momentum conservation equations. A kinetic model was also developed by performing parameter estimation using experimental fixed bed breakthrough data. These models are then used to simulate CO2 capture processes from the flue gas generated from a ~600 gross MW NGCC power plant. A cost model was developed which considers the capital cost of the reactors and the significant operating costs such as steam and electricity. Using NETL’s Framework for the Optimization and Quantification of Uncertainty of Uncertainty and Surrogates tool (FOQUS), which has the capability of linking models built using numerous modelling platforms with derivative-free optimization solvers, a techno-economic optimization of the carbon capture processes was performed which minimizes the cost of capture.

Caballero, Daison↗

An Efficient Bayesian Method for Advancing the Application of Deep Learning in Earth Science

Despite their wide and successful applications, deep learning (DL) models are prone to overfitting for small training datasets, produce a poor predictive performance for uncertain data, and provide point estimations without any indication of the accuracy and credibility. These limitations of the deterministic DL models hinder their effective application in Earth system science where the labelled data are sparse, noisy and incomplete with large uncertainty and where the predictive uncertainty quantification is needed for scientific understanding and policy decision making. Integration of Bayesian inference into DL models adds an estimate of uncertainty and regularization in the predictions. However, traditional Bayesian methods are computationally unaffordable and inflexible for high-dimensional problems, which limits their application to DL systems that typically have millions of model parameters. In this effort, we propose an efficient and general-purpose Bayesian inference method to advance DL model optimization and uncertainty quantification, so as to facilitate the adoption of DL in Earth sciences. In a demonstration, we integrate the proposed Bayesian method with a feedforward neural network (NN) to build a fast-to-evaluate surrogate of the complex Energy Exascale Earth System Land Model for efficient modeling. The formulated Bayesian NN, using a small number of training data, produces an accurate prediction with high credibility, whereas with the same small training size, the deterministic NN cannot yield a reasonable estimation and does not provide confidence information. The proposed Bayesian method is computationally efficient and flexible, capable of integration with diverse network variants such as convolutional NNs and recurrent NNs to advance the application of DL in Earth sciences.

Lu, Dan↗

SU-E-J-163: A Biomechanical Lung Model for Respiratory Motion Study

Purpose: This work presents a biomechanical model to investigate the complex respiratory motion for the lung tumor tracking in radiosurgery by computer simulation. Methods: The models include networked massspring-dampers to describe the tumor motion, different types of surrogate signals, and the force generated by the diaphragm. Each mass-springdamper has the same mechanical structure and each model can have different numbers of mass-spring-dampers. Both linear and nonlinear stiffness parameters were considered, and the damping ratio was tuned in a range so that the tumor motion was over-damped (no natural tumor oscillation occurs without force from the diaphragm). The simulation was run by using ODE45 (ordinary differential equations by Runge-Kutta method) in MATLAB, and all time courses of motions and inputs (force) were generated and compared. Results: The curvature of the motion time courses around their peaks was sensitive to the damping ratio. Therefore, the damping ratio can be determined based on the clinical data of a high sampling rate. The peak values of different signals and the time the peaks occurred were compared, and it was found that the diaphragm force had a time lead over the tumor motion, and the lead time (0.1–0.4 seconds) depended on the distance between the tumor and the diaphragm. Conclusion: We reported a model based analysis approach for the spatial and temporal relation between the motion of the lung tumor and the surrogate signals. Due to the phase lead of the diaphragm in comparing with the lung tumor motion, the measurement of diaphragm motion (or its electromyography signal) can be used as a beam gating signal in radiosurgery, and it can also be an additional surrogate signal for better tumor motion tracking. The research is funded by the American Cancer Society (ACS) grant. The grant name is: Frameless SRS Based on Robotic Head Motion Cancellation. The grant number is: RSG-13-313-01-CCE.

60 APPLIED LIFE SCIENCES↗

Elements of complexity in subsurface modeling, exemplified with three case studies

There are complexity elements to consider when applying subsurface flow and transport models to support environmental analyses. Modelers balance the benefits and costs of modeling along the spectrum of complexity, taking into account the attributes of more simple models (e.g., lower cost, faster execution, easier to explain, less mechanistic) and the attributes of more complex models (higher cost, slower execution, harder to explain, more mechanistic and technically defensible). In this paper, modeling complexity is examined with respect to considering this balance. The discussion of modeling complexity is organized into three primary elements: 1) modeling approach, 2) description of process, and 3) description of heterogeneity. Three examples are used to examine these complexity elements. Two of the examples use simulations generated from a complex model to develop simpler models for efficient use in model applications. The first example is designed to support performance evaluation of soil vapor extraction remediation in terms of groundwater protection. The second example investigates the importance of simulating different categories of geochemical reactions for carbon sequestration and selecting appropriate simplifications for use in evaluating sequestration scenarios. In the third example, the modeling history for a uranium-contaminated site demonstrates that conservative parameter estimates were inadequate surrogates for complex, critical processes and there is discussion on the selection of more appropriate model complexity for this application. All three examples highlight how complexity considerations are essential to create scientifically defensible models that achieve a balance between model simplification and complexity.

conceptual models↗

Computational analysis of an autophagy/translation switch based on mutual inhibition of MTORC1 and ULK1

We constructed a mechanistic, computational model for regulation of (macro)autophagy and protein synthesis (at the level of translation). The model was formulated to study the system-level consequences of interactions among the following proteins: two key components of MTOR complex 1 (MTORC1), namely the protein kinase MTOR (mechanistic target of rapamycin) and the scaffold protein RPTOR; the autophagy-initiating protein kinase ULK1; and the multimeric energy-sensing AMP-activated protein kinase (AMPK). Inputs of the model include intrinsic AMPK kinase activity, which is taken as an adjustable surrogate parameter for cellular energy level or AMP:ATP ratio, and rapamycin dose, which controls MTORC1 activity. Outputs of the model include the phosphorylation level of the translational repressor EIF4EBP1, a substrate of MTORC1, and the phosphorylation level of AMBRA1 (activating molecule in BECN1-regulated autophagy), a substrate of ULK1 critical for autophagosome formation. The model incorporates reciprocal regulation of mTORC1 and ULK1 by AMPK, mutual inhibition of MTORC1 and ULK1, and ULK1-mediated negative feedback regulation of AMPK. Through analysis of the model, we find that these processes may be responsible, depending on conditions, for graded responses to stress inputs, for bistable switching between autophagy and protein synthesis, or relaxation oscillations, comprising alternating periods of autophagy and protein synthesis. A sensitivity analysis indicates that the prediction of oscillatory behavior is robust to changes of the parameter values of the model. The model provides testable predictions about the behavior of the AMPK-MTORC1-ULK1 network, which plays a central role in maintaining cellular energy and nutrient homeostasis.

59 BASIC BIOLOGICAL SCIENCES↗

Quantum Drude oscillators coupled with Coulomb potential as an efficient model for bonded and non-covalent interactions in atomic dimers

The quantum Drude oscillator (QDO) model has been widely used as an efficient surrogate to describe the electric response properties of matter as well as long-range interactions in molecules and materials. Most commonly, QDOs are coupled within the dipole approximation so that the Hamiltonian can be exactly diagonalized, which forms the basis for the many-body dispersion method [Phys. Rev. Lett. 108, 236402 (2012)]. The dipole coupling is efficient and allows us to study non-covalent many-body effects in systems with thousands of atoms. However, there are two limitations: (i) the need to regularize the interaction at short distances with empirical damping functions and (ii) the lack of multipolar effects in the coupling potential. In this work, we convincingly address both limitations of the dipole-coupled QDO model by presenting a numerically exact solution of the Coulomb-coupled QDO model by means of quantum Monte Carlo methods. We calculate the potential-energy surfaces of homogeneous QDO dimers, analyzing their properties as a function of the three tunable parameters: frequency, reduced mass, and charge. We study the coupled-QDO model behavior at short distances and show how to parameterize this model to enable an effective description of chemical bonds, such as the covalent bond in the H2 molecule.

Chemistry↗

On the Use of NLDAS2 Weather Data for Hydrologic Modeling in the Upper Mississippi River Basin

Weather data are the key forces that drive hydrological processes so that their accuracy in watershed modeling is fundamentally important. For large-scale watershed modeling, weather data are either generated by using interpolation methods or derived from assimilated datasets. In the present study, we compared model performances of the Soil and Water Assessment Tool (SWAT), as driven by interpolation weather data, and NASA North American Land Data Assimilation System Phase Two (NLDAS2) weather dataset in the Upper Mississippi River Basin (UMRB). The SWAT model fed with different weather datasets were used to simulate monthly stream flow at 11 United States Geological Survey (USGS) monitoring stations in the UMRB. Model performances were evaluated based on three metrics: coefficient of determination (R 2 ), Nash–Sutcliffe coefficient (NS), and percent bias (P bias ). The results show that, after calibration, the SWAT model compared well at all monitoring stations for monthly stream flow using different weather datasets indicating that the SWAT model can adequately produce long-term water yield in UMRB. The results also show that using NLDAS2 weather dataset can improve SWAT prediction of monthly stream flow with less prediction uncertainty in the UMRB. We concluded that NLDAS2 dataset could be used by the SWAT model for large-scale watersheds like UMRB as a surrogate of the interpolation weather data. Further analyses results show that NLDAS2 daily solar radiation data was about 2.5 MJ m -2 higher than the interpolation data. As such, the SWAT model driven by NLDAS2 dataset tended to underestimate stream flow in the UMRB due to the overestimation in evapotranspiration in uncalibrated conditions. Thus, the implication of overestimated solar radiation by NLDAS2 dataset should be considered before using NLDAS2 dataset to drive the hydrological model.

54 ENVIRONMENTAL SCIENCES↗

Intercomparison and interpretation of climate feedback processes in 19 atmospheric general circulation models

The present study provides an intercomparison and interpretation of climate feedback processes in 19 atmospheric general circulation models. This intercomparison uses sea surface temperature change as a surrogate for climate change. The interpretation of cloud-climate interactions is given special attention. A roughly threefold variation in one measure of global climate sensitivity is found among the 19 models. The important conclusion is that most of this variation is attributable to differences in the models' depiction of cloud feedback, a result that emphasizes the need for improvements in the treatment of clouds in these models if they are ultimately to be used as reliable climate predictors. It is further emphazied that cloud feedback is the consequence of all interacting physical and dynamical processes in a general circulation model. The result of these processes is to produce changes in temperature, moisture distribution, and clouds which are integrated into the radiative response termed cloud feedback.

Cess, R. D.↗

Chemical kinetic modeling of component mixtures relevant to gasoline

Real fuels are complex mixtures of thousands of hydrocarbon compounds including linear and branched paraffins, naphthenes, olefins and aromatics. It is generally agreed that their behavior can be effectively reproduced by simpler fuel surrogates containing a limited number of components. In this work, a recently revised version of the kinetic model by the authors is used to analyze the combustion behavior of several components relevant to gasoline surrogate formulation. Particular attention is devoted to linear and branched saturated hydrocarbons (PRF mixtures), olefins (1-hexene) and aromatics (toluene). Model predictions for pure components, binary mixtures and multi-component gasoline surrogates are compared with recent experimental information collected in rapid compression machine, shock tube and jet stirred reactors covering a wide range of conditions pertinent to internal combustion engines. Simulation results are discussed focusing attention on the mixing effects of the fuel components.

02 PETROLEUM↗

Interpretation of cloud-climate feedback as produced by 14 atmospheric general circulation models

Understanding the cause of differences among general circulation model projections of carbon dioxide-induced climatic change is a necessary step toward improving the models. An intercomparison of 14 atmospheric general circulation models, for which sea surface temperature perturbations were used as a surrogate climate change, showed that there was a roughly threefold variation in global climate sensitivity. Most of this variation is attributable to differences in the models' depictions of cloud-climate feedback, a result that emphasizes the need for improvements in the treatment of clouds in these models if they are ultimately to be used as climatic predictors.

Cess, R. D.↗

Improving Estimation of the Koopman Operator with Kolmogorov–Smirnov Indicator Functions

It has become common to perform kinetic analysis using approximate Koopman operators that transform high-dimensional timeseries of observables into ranked dynamical modes. The key to the practical success of the approach is the identification of a set of observables that form a good basis on which to expand the slow relaxation modes. Good observables are, however, difficult to identify a priori and suboptimal choices can lead to significant underestimations of characteristic time scales. Leveraging the representation of slow dynamics in terms of Hidden Markov Models (HMM), we propose a simple and computationally efficient clustering procedure to infer surrogate observables that form a good basis for slow modes. Here, we apply the approach to an analytically solvable model system as well as on three protein systems of different complexities. We consistently demonstrate that the inferred indicator functions can significantly improve the estimation of the leading eigenvalues of Koopman operators and correctly identify key states and transition time scales of stochastic systems, even when good observables are not known a priori.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surrogate Neural Architecture Codesign Package (SNAC-Pack)

Neural Architecture Search is a powerful approach for automating model design, but existing methods struggle to accurately optimize for real hardware performance, often relying on proxy metrics such as bit operations. We present Surrogate Neural Architecture Codesign Package (SNAC-Pack), an integrated framework that automates the discovery and optimization of neural networks focusing on FPGA deployment. SNAC-Pack combines Neural Architecture Codesign's multi-stage search capabilities with the Resource Utilization and Latency Estimator, enabling multi-objective optimization across accuracy, FPGA resource utilization, and latency without requiring time-intensive synthesis for each candidate model. We demonstrate SNAC-Pack on a high energy physics jet classification task, achieving 63.84% accuracy with resource estimation. When synthesized on a Xilinx Virtex UltraScale+ VU13P FPGA, the SNAC-Pack model matches baseline accuracy while maintaining comparable resource utilization to models optimized using traditional BOPs metrics. This work demonstrates the potential of hardware-aware neural architecture search for resource-constrained deployments and provides an open-source framework for automating the design of efficient FPGA-accelerated models.

Weitz, Jason [UC, San Diego] (ORCID:00090004631535↗