Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Structural Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Electro-Magnetic Dipole Properties of The Even-Even {sup 160}Gd Nucleus in The Spectroscopic Region

In this study result of calculations using rotational, translational and Galilean invariant quasiparticle random-phase approximation is presented for the low lying dipole excitations in the even-even {sup 60}Gd nucleus. To make detail structure analysis for electric and magnetic dipole states, calculations carried out for both {delta}K = 1 and {delta}K = 0 branches. The analysis shows that almost all transitions with {delta}K = 1 are magnetic character in 2.4 divide 4 MeV energy interval. However, the calculations indicate the presence of a few prominent negative parity K{sup {pi}} = 1 states in the investigated energy interval, one of them with rather high E1 strength B(E1) = 7.1{center_dot}10{sup -3} e{sup 2} fm{sup 2} at energy 3.2 MeV. Calculated M1 dipole strength of the scissors mode K{sup {pi}} = 1{sup +} excitations clustered in two groups around 2.7 and 3.3 MeV. A similar situation arises for the experimentally obtained states two bumps around {omega}{sub i} = 2.7 MeV and {omega}{sub i} = 3.3 MeV. It has been shown that main part of spin-1 states, observed at energy 2.4 divide 4 MeV in {sup 160}Gd may be attributed to have M1 character and may be interpreted as main fragments of the scissors mode. However, it is apparent that the experimental data exceeds the calculation results for the summed B(M1) by a factor of 1.13 for M1 transitions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Design of high power radio frequency radial combiner for proton accelerator

A simplified design method has been proposed for systematic design of novel radio frequency (rf) power combiner and divider, incorporating radial slab-line structure, without using isolation resistor and external tuning mechanism. Due to low insertion loss, high power capability, and rigid mechanical configuration, this structure is advantageous for modern solid state rf power source used for feeding rf energy to superconducting accelerating structures. Analysis, based on equivalent circuit and radial transmission line approximation, provides simple design formula for calculating combiner parameters. Based on this method, novel 8-way and 16-way power combiners, with power handling capability of 4 kW, have been designed, as part of high power solid state rf amplifier development. Detailed experiments showed good performance in accordance with theory.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Ultrathin amorphization of single-crystal silicon by ultraviolet femtosecond laser pulse irradiation

The mechanisms of amorphization for crystalline Si (c-Si) induced by ultraviolet femtosecond laser irradiation are described in this paper. The wavelength of the laser pulse was 267 nm, which is the third harmonics of a Ti:sapphire laser. We performed a laser scanning microscopy and a transmission electron microscopy for surface and structural analysis and imaging pump-probe measurements to investigate the dynamics of the process. From the analyses, we confirmed that the thickness of the amorphized layer was quite uniform and there is no lattice defect under the amorphized section. The thickness of the amorphous Si (a-Si) layer was 7 nm and the threshold fluence of the amorphization was 44 mJ/cm{sup 2}. From the Imaging Pump-Probe measurement it was revealed that the melting time is less than 1 ns and ultra high speed melting and re-solidification process was occurred. The melting depth estimated by the Imaging Pump-Probe measurement was 7 nm. The melted portion completely corresponded to the amorphized section.

36 MATERIALS SCIENCE↗

Model based atomic resolution tomography

Electron tomography is a valuable three-dimensional characterization method, but the technique has so far been limited to a nanometer scale resolution, and therefore complementary two-dimensional structural analysis is generally performed using other techniques. In this paper, computer simulations of the latest transmission electron microscope technologies are performed on a CeO{sub 2} supercell to investigate the extension of electron tomography to the atomic scale resolution, from a tilt series of high resolution electron microscopy (HREM) images. We showed that high-voltage and aberration-corrected microscopes were both capable of retrieving adjacent oxygen and Ce atoms for a thickness up to 2.5 nm. In the case where only a few tilt angle projections are in zone-axis orientations, we introduced a hybrid tomography method, whereby a lattice-resolved tomogram obtained from a few zone-axis projections is combined with the external shape reconstruction of the crystal from binary projections. Finally, we discussed some experimental challenges related to the proposed HREM tomography technique.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced Superconducting Transition Temperature in FeSe0.5Te0.5 Thin Films

We report magnetoresistive and structural measurements of superconducting FeSe0.5Te0.5 epitaxial thin films grown by pulsed laser deposition. Enhanced onset superconducting transition temperature ({approx} 17 K) is observed in some of these films. Structural analysis by x-ray diffraction and high resolution transmission electron microscopy reveal that these films generally have significantly shorter out-of-plane lattice constant c than the bulk value, suggesting that the out-of-plane changes have a dominating impact on the superconducting transition in iron-based superconductors. Our data also indicate that the upper critical field Hc2(0) of those films may reach as high as 50 T.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation of long-range ordered quantum dots arrays in amorphous matrix by ion beam irradiation

We demonstrate the production of a well ordered three-dimensional array of Ge quantum dots in amorphous silica matrix. The ordering is achieved by ion beam irradiation and annealing of a multilayer film. Structural analysis shows that quantum dots nucleate along the direction of the ion beam used for irradiation, while the mutual distance of the quantum dots is determined by the diffusion properties of the multilayer material rather than the distances between traces of ions that are used for irradiation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Above-Bandgap Ordinary Optical Properties of GaSe Single Crystal

We report above-bandgap ordinary optical properties of {var_epsilon}-phase GaSe single crystal. Reference-quality pseudodielectric function <{var_epsilon}(E)> = <{var_epsilon}{sub 1}(E)> +i <{var_epsilon}{sub 2}(E)> and pseudorefractive index <N(E)> = <n(E)> +i <k(E)> spectra were measured by spectroscopic ellipsometry from 0.73 to 6.45 eV at room temperature for the light polarization perpendicular to the optic axis ({rvec E} {perpendicular} {rvec e}). The <{var_epsilon}> spectrum exhibited several interband-transition critical-point structures. Analysis of second-energy derivatives calculated numerically from the measured data yielded the critical-point energy values.

36 MATERIALS SCIENCE↗

Integrability aspects with optical solitons of a generalized variable-coefficient N-coupled higher order nonlinear Schroedinger system from inhomogeneous optical fibers

For describing the long-distance communication and manufacturing problems of N fields propagation in inhomogeneous optical fibers, we consider a generalized variable-coefficient N-coupled nonlinear Schroedinger system with higher order effects such as the third-order dispersion, self-steepening and self-frequency shift. Using the Painleve singularity structure analysis, we obtain two cases for this system to admit the Painleve property. Then for case (1) we derive the optical dark solitons via solving the Hirota bilinear equations; and based on the obtained (2N+1)x(2N+1) Lax pair, we construct the Darboux transformation to obtain the optical bright solitons (including the multisoliton profiles) for case (2). Finally, the features of optical solitons (both dark and bright ones) in inhomogeneous optical fibers are analyzed and graphically discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Two-point motional Stark effect diagnostic for Madison Symmetric Torus

A high-precision spectral motional Stark effect (MSE) diagnostic provides internal magnetic field measurements for Madison Symmetric Torus (MST) plasmas. Currently, MST uses two spatial views - on the magnetic axis and on the midminor (off-axis) radius, the latter added recently. A new analysis scheme has been developed to infer both the pitch angle and the magnitude of the magnetic field from MSE spectra. Systematic errors are reduced by using atomic data from atomic data and analysis structure in the fit. Reconstructed current density and safety factor profiles are more strongly and globally constrained with the addition of the off-axis radius measurement than with the on-axis one only.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Role of Ge Wetting Layer and Ge Islands in Si MSM Photodetectors

In this work, Ge thin films were deposited on silicon substrates by radio frequency magnetron sputtering to form Ge islands from Ge layer on Si substrate during post-growth rapid thermal annealing (RTA). The size of the islands decreases from 0.6 to 0.1 as the rapid thermal annealing time increases from 30 s to 60 s at 900 deg. C. Not only that the annealing produces Ge islands but also wetting layer. Energy Dispersive X-ray Spectroscopy (EDX) and Scanning Electron Microscopy (SEM) were employed for structural analysis of Ge islands. Metal-Semiconductor-Metal photodetectors (MSM PDs) were fabricated on Ge islands (and wetting layer)/Si. The Ge islands and wetting layer between the contacts of the fabricated devices are etched in order to see their effects on the device. The performance of the Ge islands MSM-PD was evaluated by dark and photo current-voltage (I-V) measurements at room temperature (RT). It was found that the device with island and wetting layer significantly enhance the current gain (ratio of photo current to dark current) of the device.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation of metal nanoparticles of various sizes in plasma plumes produced by Ti:sapphire laser pulses

In this paper, an experimental study on generation of nanoparticle various sizes using Ti:sapphire laser pulses, is reported. Nanoparticle formation in plasma plumes of metals like silver and copper, expanding in vacuum, has been studied using stretched pulses of 300 ps duration [subnanoseconds (sub-ns)] from a Ti:sapphire laser. It has been compared with the nanoparticle formation (of the same materials) when compressed pulses of 45 fs duration were used under similar focusing conditions. Nanoparticle formation is observed at intensities as high as 2x10{sup 16} W/cm{sup 2}. The structural analysis of the nanoparticle deposition on a silicon substrate showed that, using 45 fs pulses, smaller nanoparticles of average size {approx}20 nm were generated, whereas on using the sub-ns pulses, larger particles were produced. Also, the visible light transmission and reflection from the nanoparticle film of Ag on glass substrate showed surface plasmon resonance (SPR). The SPR curves of the films of nanoparticles deposited by femtosecond pulses were always broader and reflection/transmission was always smaller when compared with the films formed using the sub-ns pulses, indicating smaller size particle formation by ultrashort pulses. Thus, it has been demonstrated that variation in the laser pulse duration of laser offers a simple tool for varying the size of the nanoparticles generated in plasma plumes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of structure and magnetoresistance in Co/ZnO films

Co/ZnO films were deposited on glass substrates by magnetron sputtering at room temperature. The structure of the as-deposited films is studied by means of x-ray diffraction, x-ray photoelectron spectroscopy, and the zero-field-cooled and field-cooled magnetization curves. It is shown that the as-deposited samples consist of a mixture of regions of metallic Co and semiconducting ZnO. Large negative magnetoresistance of 26% and 11.9% are observed in the as-deposited Co/ZnO film with Co concentration of 50.7 at. % at 10 K and room temperature, respectively. Structural analysis, the temperature dependence of the conductivity and magnetoresistance reveal that the magnetoresistance is induced by spin-dependent tunneling between regions of conducting magnetic Co through the ZnO semiconducting barriers. The enhanced magnetoresistance in the low temperature regime may be related to the existence of higher-order tunneling processes between large Co regions mediated by small Co particles.

36 MATERIALS SCIENCE↗

In situ magnetoresistance measurements of ion-beam-etched Fe-Co thin films

The effect of ion-beam (IB) irradiation on magnetic softness in Fe-Co thin films was evaluated by means of in situ magnetoresistance (MR) measurements. A 25 nm Fe{sub 70}Co{sub 30} film was etched by Ar IB, and successive MR measurements were performed in the same IB etching chamber. Since the IB etching and MR measurements were performed alternately in vacuum, it was possible to evaluate the etching effect on magnetic softness of the single sample without any capping layer interaction. We name the thickness below which the magnetic softness of the etched film starts to decrease as the critical thickness (T{sub cr}). The T{sub cr} was found to be affected by IB energy: 150 and 250 V IB, respectively, showed 7.5 and 10 nm smaller T{sub cr} than that of 600 V IB. Structural analysis revealed the 600 V IB introduced a larger deterioration in the film crystallinity than with the 250 V IB.

36 MATERIALS SCIENCE↗

Atomic Data and Modelling for Fusion: the ADAS Project

The paper is an update on the Atomic Data and Analysis Structure, ADAS, since ICAM-DATA06 and a forward look to its evolution in the next five years. ADAS is an international project supporting principally magnetic confinement fusion research. It has participant laboratories throughout the world, including ITER and all its partner countries. In parallel with ADAS, the ADAS-EU Project provides enhanced support for fusion research at Associated Laboratories and Universities in Europe and ITER. OPEN-ADAS, sponsored jointly by the ADAS Project and IAEA, is the mechanism for open access to principal ADAS atomic data classes and facilitating software for their use. EXTENDED-ADAS comprises a variety of special, integrated application software, beyond the purely atomic bounds of ADAS, tuned closely to specific diagnostic analyses and plasma models.The current scientific content and scope of these various ADAS and ADAS related activities are briefly reviewed. These span a number of themes including heavy element spectroscopy and models, charge exchange spectroscopy, beam emission spectroscopy and special features which provide a broad baseline of atomic modelling and support. Emphasis will be placed on 'lifting the fundamental data baseline'--a principal ADAS task for the next few years. This will include discussion of ADAS and ADAS-EU coordinated and shared activities and some of the methods being exploited.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Long-Working-Distance Kirkpatrick-Baez Mirrors for Hard X-ray Beamlines at SPring-8

We designed and installed two types of long-working-distance Kirkpatrick-Baez (KB) mirrors and mirror manipulators, which were customized into each experiment for hard x-ray undulator beamlines at SPring-8. For the BL32XU RIKEN Targeted Proteins beamline, 400-mm-long KB focusing mirrors for a beam size of 1 {mu}m with a 730-mm-long working distance were designed for carrying out the structural analysis of protein microcrystals. We realized a focusing beam size of 0.9x0.9 {mu}m{sup 2}(FWHM) and a focusing intensity of 6x10{sup 10} (photons/s) at an x-ray energy of 12.4 keV. For the BL19LXU RIKEN SR Physics beamline, we developed KB mirrors for 100-nm focusing with a 100-mm-working distance for the purpose of nano-focus x-ray diffraction. A focusing beam size of 100x100 nm{sup 2}(FWHM) and a high focusing intensity of 3.7x10{sup 10} (photons/s) at an x-ray energy of 12.4 keV were realized.

43 PARTICLE ACCELERATORS↗

Radial profile measurement of electron temperature in edge stochastic magnetic field layer of LHD using intensity ratio of extreme ultraviolet line emissions

Vertical profile of neon line emissions in 30-650 A wavelength range has been observed in horizontally elongated plasma cross section of Large Helical Device (LHD). Intensity ratio between the neon line emissions is studied to measure the radial profile of electron temperature in the edge stochastic magnetic field layer of LHD. The edge temperature profile successfully obtained from the line ratio of NeVIII 2s-3p to 2p-3s transitions is compared with the simulation based on three-dimensional edge transport code. The result shows a reasonably good agreement with the edge temperature profile analyzed from atomic data and analysis structure code. The electron temperature at last closed flux surface measured from the intensity ratio is also in good agreement with that measured from Thomson scattering.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Improvement of (004) texturing by slow growth of Nd doped TiO{sub 2} films

In this work, we present preferred (004) texturing of sputter deposited titanium dioxide (TiO{sub 2}) films on glass substrates as a consequence of Nd doping at very slow growth rate. Nd concentration was varied from 0.0 to 2.0 atomic percent (at. %) in TiO{sub 2} thin films deposited under identical growth conditions, i.e., the growth rate of 0.6 A/s and at 500 Degree-Sign C. At 2 at. % Nd, complete texturing along (004) plane was observed, as indicated by the X-ray diffraction analyses. Morphology of the deposited TiO{sub 2} films from pure to 2 at. % Nd doped TiO{sub 2} films showed faceted to planar growth. Visualization of electrical and structural analysis (VESTA) software revealed that the change in the morphology was due to preferential growth in (004) orientation. Raman spectroscopy highlighted the phonon confinement in the Eg mode, and a red shift was observed due to an increase in the anti-symmetry in bonding with increased Nd concentration. XPS results confirmed the variation in oxygen vacancy concentration along with the reduction of Ti and Nd valance states with the change in the dopant concentration. Our experiments confirmed that the substitution of Nd at Ti sites was responsible for texturing in (004) orientation and this was possible by growing films at a very slow rate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗