SEARCH · Engineering Papers

Results for “Stokes flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Kinematic domain decomposition for boundary-motion-induced flow simulations

A method is developed to solve the unsteady Navier-Stokes equations on a composite grid, which consists of subdomain grids moving with respect to each other. These subdomains are structured grids with different topologies. This method eliminates assuming the moving components to be instantaneously stationary, where deciding on the particular frozen instants is difficult and affects the solution adversely. Moreover, this method captures the boundary-motion-induced flow component. The method is demonstrated through a transonic flow past an airfoil, which experiences a combined motion of pitching and plunging. An O-grid around the airfoil is overlapped on a fine Cartesian grid, which is zonally embedded in a coarse Cartesian grid. The coarse grid is stationary but the other two grids are plunging. Only the O-grid is also sinusoidally pitching. The results are compared successfully with the experimental data.

Baysal, Oktay↗

NASA NTRS1978

Dynamic stall of an oscillating airfoil

Unsteady separated boundary layers and wakes were studied by investigating flow past an oscillating airfoil which in part models the retreating blade stall on the helicopters. The Navier-Stokes equations in terms of the vorticity and stream function for laminar flow were solved to determine the flow field around a modified NACA 0012 airfoil. After a fully developed flow was determined at zero incidence, the airfoil was oscillated in pitch through an angle of attack range from 0 deg to 20 deg. The computed streamlines during this pitch-up motion are in qualitative agreement with the trajectories of air bubbles observed in water tunnel experiments conducted with a NACA 0012 airfoil under the same conditions. During the pitch-down motion of the airfoil, the computed flow patterns cannot be compared with the experiments because the trajectories of air bubbles intersect.

Mehta, U. B.↗

NASA NTRS1986

An explicit finite-volume time-marching procedure for turbulent flow calculations

A method was developed which calculates two-dimensional, transonic, viscous flow in ducts. The finite-volume, time-marching formulation is used to obtain steady flow solutions of the Reynolds-averaged form of the Navier-Stokes equations. The entire calculation is performed in the physical domain. Control volumes are chosen so that smoothing of flow properties, typically required for stability, is not required. Different time steps are used in the different governing equations. A new pressure interpolation scheme is introduced which improves the shock capturing ability of the method. A multi-volume method for pressure changes in the boundary layer allows calculations which use very long and thin control volumes (length/height - 1000). The method is compared with two test cases. Essentially incompressible turbulent boundary layer flow in an adverse pressure gradient is calculated and the computed distributions of mean velocity and shear are in good agreement with the measurements. Transonic viscous flow in a converging diverging nozzle is calculated; the Mach number upstream of the shock is approximately 1.25. The agreement between the calculated and measured shock strength and total pressure losses is good.

Nicholson, Stephen↗

NASA NTRS1987

An explicit finite-volume time-marching procedure for turbulent flow calculations

Nicholson, Stephen↗

NASA NTRS1992

Computational study of transition front on a swept wing leading-edge model

The e(N) method is employed with Navier-Stokes calculations to study 3D supersonic boundary layers at the leading-edge region of swept wings with attention given to the conditions for linear stability. Mean-flow profiles are computed as solutions to the Navier-Stokes equations, and the e(N) method is used to identify the onset of the transition. Specific treatment is given to the identification of parameters which affect the transition such as free-stream Reynolds number, wall cooling, and boundary-layer suction levels. The boundary layer can be stabilized to below N=10 levels in all locations by utilizing distributed suction, and enhanced stabilization can also be achieved by employing wall cooling and reduced free-stream Reynolds numbers. This study presents key calculations for corresponding experimental investigations by shedding light on requirements for test conditions and measurement requirements.

Iyer, Venkit↗

NASA NTRS1992

Surface tension and buoyancy-driven flow in a non-isothermal liquid bridge

The Navier-Stokes-Boussinesq equations governing the transport of momentum, mass and heat in a nonisothermal liquid bridge with a temperature-dependent surface tension are solved using a vorticity-stream-function formulation together with a nonorthogonal coordinate transformation. The equations are discretized using a pseudo-unsteady semi-implicit finite difference scheme and are solved by the ADI method. A Picard-type iteration is adopted which consists of inner and outer iterative processes. The outer iteration is used to update the shape of the free surface. Two schemes have been used for the outer iteration; both use the force balance normal to the free surface as the distinguished boundary condition. The first scheme involves successive approximation by the direct solution of the distinguished boundary condition. The second scheme uses the artificial force imbalance between the fluid pressure, viscous and capillary forces at the free surface which arises when the boundary condition for force balance normal to the surface is not satisfied. This artificial imbalance is then used to change the surface shape until the distinguished boundary condition is satisfied. These schemes have been used to examine a variety of model liquid bridge situations including purely thermocapillary-driven flow situations and mixed thermocapillary- and bouyancy-driven flow.

Zhang, Yiqiang↗

NASA NTRS1989

Euler/Navier-Stokes calculations of transonic flow past fixed- and rotary-wing aircraft configurations

Computational fluid dynamics has an increasingly important role in the design and analysis of aircraft as computer hardware becomes faster and algorithms become more efficient. Progress is being made in two directions: more complex and realistic configurations are being treated and algorithms based on higher approximations to the complete Navier-Stokes equations are being developed. The literature indicates that linear panel methods can model detailed, realistic aircraft geometries in flow regimes where this approximation is valid. As algorithms including higher approximations to the Navier-Stokes equations are developed, computer resource requirements increase rapidly. Generation of suitable grids become more difficult and the number of grid points required to resolve flow features of interest increases. Recently, the development of large vector computers has enabled researchers to attempt more complex geometries with Euler and Navier-Stokes algorithms. The results of calculations for transonic flow about a typical transport and fighter wing-body configuration using thin layer Navier-Stokes equations are described along with flow about helicopter rotor blades using both Euler/Navier-Stokes equations.

Deese, J. E.↗

NASA NTRS2009

Prediction of Turbulence-Generated Noise in Unheated Jets: JeNo Users' Manual (Version 1.0) - Part 2

JeNo (Version 1.0) is a Fortran90 computer code that calculates the far-field sound spectral density produced by axisymmetric, unheated jets at a user specified observer location and frequency range. The user must provide a structured computational grid and a mean flow solution from a Reynolds-Averaged Navier Stokes (RANS) code as input. Turbulence kinetic energy and its dissipation rate from a k-epsilon or k-omega turbulence model must also be provided. JeNo is a research code, and as such, its development is ongoing. The goal is to create a code that is able to accurately compute far-field sound pressure levels for jets at all observer angles and all operating conditions. In order to achieve this goal, current theories must be combined with the best practices in numerical modeling, all of which must be validated by experiment. Since the acoustic predictions from JeNo are based on the mean flow solutions from a RANS code, quality predictions depend on accurate aerodynamic input.This is why acoustic source modeling, turbulence modeling, together with the development of advanced measurement systems are the leading areas of research in jet noise research at NASA Glenn Research Center.

Khavaran, Abbas↗

NASA NTRS1997

Computation of Vortex Shedding and Radiated Sound for a Circular Cylinder

The Lighthill acoustic analogy approach combined with Reynolds-averaged Navier Stokes is used to predict the sound generated by unsteady viscous flow past a circular cylinder assuming a correlation length of ten cylinder diameters. The two- dimensional unsteady ow field is computed using two Navier-Stokes codes at a low Mach number over a range of Reynolds numbers from 100 to 5 million. Both laminar ow as well as turbulent ow with a variety of eddy viscosity turbulence models are employed. Mean drag and Strouhal number are examined, and trends similar to experiments are observed. Computing the noise within the Reynolds number regime where transition to turbulence occurs near the separation point is problematic: laminar flow exhibits chaotic behavior and turbulent ow exhibits strong dependence on the turbulence model employed. Comparisons of far-field noise with experiment at a Reynolds number of 90,000, therefore, vary significantly, depending on the turbulence model. At a high Reynolds number outside this regime, three different turbulence models yield self-consistent results.

Cox, Jared S.↗

NASA NTRS1986

A locally implicit method for fluid flow problems

The fluid flow inside the space shuttle main engine (SSME) traverses through a complex geometrical configuration. The flow is compressible, viscous, and turbulent with pockets of separated regions. Several computer codes are being developed to solve three dimensional Navier-Stokes equations with different turbulence models for analyzing the SSME internal flow. The locally implicit scheme is a computationally efficient scheme which converges rapidly in multi-grid modes for elliptic problems. It has the promise of providing a rapidly converging algorithm for steady-state viscous flow problems.

Reddy, K. C.↗

NASA NTRS1984

Transition to turbulence in plane channel flows

Results obtained from a numerical simulation of the final stages of transition to turbulence in plane channel flow are described. Three dimensional, incompressible Navier-Stokes equations are numerically integrated to obtain the time evolution of two and three dimensional finite amplitude disturbances. Computations are performed on CYBER-203 vector processor for a 32x51x32 grid. Results are presented for no-slip boundary conditions at the solid walls as well as for periodic suction blowing to simulate active control of transition by mass transfer. Solutions indicate that the method is capable of simulating the complex character of vorticity dynamics during the various stages of transition and final breakdown. In particular, evidence points to the formation of a lambda-shape vortex and the subsequent system of horseshoe vortices inclined to the main flow direction as the main elements of transition. Calculations involving periodic suction-blowing indicate that interference with a wave of suitable phase and amplitude reduces the disturbance growth rates.

Biringen, S.↗

NASA NTRS1989

3-D composite velocity solutions for subsonic/transonic flows

A composite velocity procedure for the three-dimensional reduced Navier-Stokes equations is developed. In the spirit of matched asymptotic expansions, the velocity components are written as a combination multiplicative and additive composite of viscouslike velocities and pseudopotential or inviscid velocities. The solution procedure is then consistent with both asymptotic inviscid flow and boundary layer theory. For transonic flow cases, the Enquist-Osher flux biasing scheme developed for the full potential equation is used. A quasi-conservation form of the governing equations is used in the shock region to capture the correct rotational shock with the standard nonconservation form of the equations used in nonshock regions. The consistent coupled strongly implicit procedure coupled with a plane relaxation procedure is used to solve the discretized equations.

Gordnier, R. E.↗

NASA NTRS1993

Assessment of three numerical methods for the computation of a low-density plume flow

Results from three numerical methods including one based on the Navier-Stokes equations, one based on kinetic theory using the DSMC method, and one based on the Boltzmann equation with a Krook-type collision term are compared to each other and to experimental data for a model problem of heated nitrogen flow in a conical nozzle expanding into a vacuum. The problem simulates flow in a resistojet, a low-thrust, electrothermal rocket. The continuum method is applied to both the internal flow and near-field plume. The DSMC and Boltzmann methods are applied primarily to the plume. Experimental measurements of Pitot pressure and flow angle, taken with an apparatus that duplicates the model nozzle flow, are used in the comparisons.

Penko, Paul F.↗

NASA NTRS1983

Transition to turbulence in plane channel flow

A numerical simulation of the final stages of transition to turbulence in plane channel flow is reported. Three dimensional, incompressible Navier-Stokes equations are numerically integrated to obtain the time-evolution of two and three dimensional finite amplitude disturbances. Computations are performed on the CYBER-203 vector processor for a 32x51x32 grid. Results are presented for no-slip boundary conditions at the solid walls as well as for periodic suction-blowing to simulate active control of transition by mass transfer. Solutions indicate that the method is capable of simulating the complex character of vorticity dynamics during the various stages of transition and final breakdown. In particular, evidence points to the formation of a lambda-shape vortex and the subsequent system of horseshoe vortices inclined to the main flow direction as the main elements of transition. Calculations involving suction-blowing indicate that interference with a wave of suitable phase and amplitude reduces the disturbance growth rates.

Biringen, S.↗

NASA NTRS1988

Navier-Stokes simulation of unsteady three-dimensional blade-vortex interactions

The unsteady, viscous, three-dimensional flow field of a helicopter rotor blade encountering a passing vortex is calculated by solving the thin layer Navier-Stokes equations by a finite-difference numerical procedure. A prescribed vortex method is adopted to preserve the structure of the interacting concentrated vortex. The test cases considered correspond to the experimental model rotor test conditions of Caradonna et al.

Srinivasan, G. R.↗

NASA NTRS1995

On the Conservative Interface Treatment for Multi-Block Viscous Flow Computations

A pressure-based multi-block computational method is developed for solving the incompressible Navier-Stokes equations in general curvilinear grid systems. The scheme is based on the semi-implicit type flow solver with the staggered grid. Issues concerning the mass and momentum flux treatments at the discontinuous grid interface are addressed. Systematic numerical experiments for different interface treatments involving (1) straightforward interpolation, (2) globally conservative scheme, and (3) locally conservative scheme have been conducted. It is demonstrated that mass conservation has to be maintained locally, at the grid interface, with accuracy compatible with that of the scheme used in interior domain. Direct interpolation or globally conservative interface treatment of mass flux can not yield solutions with desirable accuracy.

Liu, J.↗

NASA NTRS1986

A numerical study of separation on a spheroid at incidence

The three-dimensional incompressible, steady and laminar flow field around a prolate spheroid at incidence is considered. The parabolized Navier-Stokes equations are solved numerically. The method can handle vortex types as well as bubble type flow separation because the pressure is one of the dependent variables. Here, the distribution of the skin friction is reported for two test cases. The first test case is a prolate spheroid of aspect ratio of 4:1 at 6 degrees incidence and Reynolds number of 1 million (based on half the major axis). The second case is a spheroid with a 6:1 aspect ratio at 10 degrees incidence and Reynolds number of 0.8 x 1 million. The properties of the flow field near the body are discussed on the basis of the pattern of the skin friction lines, and the shape of the separation lines. Favorable agreement with experimental results is obtained.

Rosenfeld, M.↗

NASA NTRS2016

Goals and Status of the NASA Juncture Flow Experiment

The NASA Juncture Flow experiment is a new effort whose focus is attaining validation data in the juncture region of a wing-body configuration. The experiment is designed specifically for the purpose of CFD validation. Current turbulence models routinely employed by Reynolds-averaged Navier-Stokes CFD are inconsistent in their prediction of corner flow separation in aircraft juncture regions, so experimental data in the near-wall region of such a configuration will be useful both for assessment as well as for turbulence model improvement. This paper summarizes the Juncture Flow effort to date, including preliminary risk-reduction experiments already conducted and planned future experiments. The requirements and challenges associated with conducting a quality validation test are discussed.

Rumsey, Christopher L.↗