Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILICATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Salinization of porewater in a multiple aquitard-aquifer system in Jiangsu coastal plain, China

Chemical and isotopic compositions were analyzed in porewater squeezed from a clayey aquitard in Jiangsu coastal plain, eastern China, to interpret the salinity origin, chemical evolution and water-mass mixing process. A strong geochemical fingerprint was obtained with an aligned Cl/Br ratio of 154 in the salinized aquitard porewater over a wide Cl{sup −} concentration range (396–9,720 mg/L), indicating that porewater salinity is likely derived from a mixing with old brine with a proportion of less than 20%. Very small contributions of brine exerted limited effects on water stable isotopes. The relationships between porewater δ{sup 18}O and δD indicate that shallow and intermediate porewaters could be original seawater and were subsequently diluted with modern meteoric water, whereas deep porewaters with depleted stable isotopic values were probably recharged during a cooler period and modified by evaporation and seawater infiltration. The cation–Cl relationship and mineralogy of associated strata indicate that porewater has been chemically modified by silicate weathering and ion-exchange reactions. {sup 87}Sr/{sup 86}Sr ratios of 0.7094–0.7112 further confirm the input source of silicate minerals. Numerical simulations were used to evaluate the long-term salinity evolution of the deep porewater. The alternations of boundary conditions (i.e., the third aquifer mixed with brine at approximately 70 ka BP, followed by recharge of glacial meltwater at 20–25 ka BP, and then mixing with Holocene seawater at 7–10 ka BP) are responsible for the shift in porewater salinity. These timeframes correspond with the results of previous studies on ancient marine transgression-regression in Jiangsu coastal plain.

58 GEOSCIENCES↗

Experimental Liquidus Studies of the Pb-Fe-Si-O System in Equilibrium with Metallic Pb

Phase equilibria of the Pb-Fe-Si-O system have been investigated at 943 K to 1773 K (670 °C to 1500 °C) for oxide liquid in equilibrium with liquid Pb metal and solid oxide phases: (a) quartz, tridymite, or cristobalite; (b) (fayalite + tridymite) or (fayalite + spinel); (c) spinel (Fe{sub 3}O{sub 4}); (d) complex lead-iron silicates (melanotekite PbO·FeO{sub 1.5}·SiO{sub 2}, barysilite 8PbO·FeO·6SiO{sub 2}, 5PbO·FeO{sub 1.5}·SiO{sub 2}, and 6PbO·FeO{sub 1.5}·SiO{sub 2}); (e) lead silicates (Pb{sub 2}SiO{sub 4}, Pb{sub 11}Si{sub 3}O{sub 17}); (f) lead ferrites (magnetoplumbite Pb{sub 1+x}Fe{sub 12−x}O{sub 19−x} solid solution range); and (g) lead oxide (PbO, massicot). High-temperature equilibration on primary phase or iridium substrates, followed by quenching and direct measurement of Pb, Fe, and Si concentrations in the phases with the electron probe X-ray microanalysis, has been used to accurately characterize the system in equilibrium with Pb metal. All results are projected onto the PbO-“FeO”-SiO{sub 2} plane for presentation purposes. The present study is the first systematic characterization of liquidus over a wide range of compositions in this system in equilibrium with metallic Pb.

36 MATERIALS SCIENCE↗

Experimental Liquidus Study of the Ternary CaO-ZnO-SiO{sub 2} System

Phase equilibria of the ternary CaO-ZnO-SiO{sub 2} system have been investigated at 1170 °C to 1691 °C for oxide liquid in equilibrium with air and solid oxide phases: tridymite or cristobalite SiO{sub 2} (up to two immiscible liquids), pseudowollastonite (CS) CaSiO{sub 3}, rankinite (C{sub 3}S{sub 2}) Ca{sub 3}Si{sub 2}O{sub 7}, dicalcium silicate (C{sub 2}S) (Ca, Zn){sub 2}SiO{sub 4}, tricalcium silicate (C{sub 3}S) (Ca, Zn){sub 3}SiO{sub 5}, lime (Ca, Zn)O, zincite (Zn, Ca)O, willemite Zn{sub 2}SiO{sub 4} and hardystonite (melilite) Ca{sub 2}ZnSi{sub 2}O{sub 7}, covering the ranges of concentrations not studied before. High-temperature equilibration on primary phase (silica) or inert metal (platinum) substrates followed by quenching and direct measurement of the Ca, Zn and Si concentrations in the phases with the electron probe X-ray microanalysis (EPMA) has been used to accurately characterize the system. Liquidus phase equilibrium data of the present authors for the CaO-ZnO-SiO{sub 2} system are essential to obtain a self-consistent set of parameters of thermodynamic models for all phases.

36 MATERIALS SCIENCE↗

Summary of research on the effect of LiNO{sub 3} on alkali-silica reaction in new concrete

This paper summarizes findings from a research study conducted at the University of New Brunswick in collaboration with the University of Texas at Austin, and CANMET-MTL, on the effect of LiNO{sub 3} on ASR in new concrete. The studies included expansion testing, silica dissolution measurements and microstructural examinations of cement systems containing glass and two different reactive aggregates (NB and NS). Only a small proportion of the data are presented here for the purpose of highlighting the principal findings of this investigation. Based on these findings, it is proposed that the inhibiting effect of LiNO{sub 3} against ASR in new concrete is attributed to the formation of two reaction products in the presence of lithium, these being a crystalline lithium silicate compound (Li{sub 2}SiO{sub 3}) crystal and a Li-bearing, low Ca silica gel. These two phases could serve as a diffusion barrier and protective layer to prevent the reactive silica from further attack by alkalis. It was found that the reason the two reactive aggregates selected responded differently to LiNO{sub 3} was due to the difference in their textural features. The NB aggregate contained reactive volcanic glass particles, the surface of which was immediately and equally available to sodium, potassium and lithium, and thus a Li-Si barrier was able to form quickly. The reactive phase in the NS aggregate was microcrystalline and strained quartz, which was embedded in a dense matrix of a non-reactive predominantly alumino-silicate phase and was not easily accessible to lithium.

36 MATERIALS SCIENCE↗

Does the Al substitution in C-S-H(I) change its mechanical property?

This study examines the influence of Al substitution for Si on the bulk modulus of calcium silicate hydrate I [C-S-H(I)], a structural analogue of C-S-H, by performing high-pressure synchrotron X-ray diffraction experiments in two C-S-H(I) samples: one a hydration product of alkali-activated slag and the other a synthetic C-S-H(I). The test result shows that not only the bulk modulus but also the incompressibility of the lattice parameters a, b, and c of two C-S-H(I) samples are very similar to each other, regardless of the Al substitution. This result may be due to the four-coordinated configuration of the substituted Al, which makes the dreierketten silicate chains maintain the same arrangement after the substitution.

36 MATERIALS SCIENCE↗

Experimental determination of bulk modulus of 14 A tobermorite using high pressure synchrotron X-ray diffraction

Using a diamond anvil cell, 14 A tobermorite, a structural analogue of calcium silicate hydrates (C-S-H), was examined by high-pressure synchrotron X-ray diffraction up to 4.8 GPa under hydrostatic conditions. The bulk modulus of 14 A tobermorite was calculated, K{sub o} = 47 GPa. Comparison of the current results with previous high pressure studies on C-S-H(I) indicates that: (1) the compression behavior of the lattice parameters a and b of 14 A tobermorite and C-S-H(I) are very similar, implying that both materials may have very similar Ca-O layers, and also implying that an introduction of structural defects into the Ca-O layers may not substantially change in-plane incompressibility of the ab plane of 14 A tobermorite; and (2) the bulk modulus values of 14 A tobermorite and C-S-H(I) are dominated by the incompressibility of the lattice parameter c, which is directly related to the interlayer spacing composed of dreierketten silicate chains, interlayer Ca, and water molecules.

36 MATERIALS SCIENCE↗

Alternative cement clinkers

This article reviews proposed technical approaches for the manufacture and use of alternatives to Portland Cement Clinker as the main reactive binder component for ordinary concrete construction in non-specialty applications, while giving lower net global CO{sub 2} emissions in use. A critical analysis, taking into account a wide range of technical considerations, suggests that, with the exception of alkali-activated systems, (treated in a separate paper in this issue,) there are only four classes of alternative clinker system that deserve serious attention with respect to global reductions in concrete-related CO{sub 2} emissions:(A)Reactive Belite-rich Portland cement (RBPC) clinkers (B)Belite-Ye'elimite-Ferrite (BYF) clinkers (C)Carbonatable Calcium Silicate clinkers (CCSC) (D)Magnesium Oxides derived from Magnesium Silicates (MOMS) A and B are “hydraulic” clinkers, (i.e. clinkers which harden by reaction with water,) C is a “carbonatable” clinker, (i.e. one which hardens by reaction with CO{sub 2} gas) and D can fall into both categories.

36 MATERIALS SCIENCE↗

Hydration of MgO/SiO{sub 2} and Portland cement mixtures: A structural investigation of the hydrated phases by means of X-ray diffraction and solid state NMR spectroscopy

The phases formed during the hydration of several MgO/SiO{sub 2} and Portland cement mixtures were investigated by performing X-ray diffraction and {sup 29}Si and {sup 27}Al solid state NMR experiments on samples hydrated for 1, 7 and 28 days. The structural properties and relative amount of magnesium silicate hydrate (M-S-H) and calcium silicate hydrate (C-S-H) gels, which form as separate phases, were found to significantly depend on the initial composition of the mixtures. Faster hydration kinetics was observed for all mixtures with respect to the “pure” MgO/SiO{sub 2} and Portland cement samples, pH and excess of silica playing a major role. Moreover, the addition of the MgO/SiO{sub 2} mixture to Portland cement affects the formation of aluminum-containing hydrated phases.

36 MATERIALS SCIENCE↗

The composition and performance of alite-ye'elimite clinker produced at 1300 °C

Alite-ye'elimite clinker is a high cementing clinker prepared by introducing calcium sulfoaluminate, a non-silicate mineral, into the cement clinker. The mineral composition and mechanics of tricalcium silicate-rich sulfur aluminate prepared at 1300 °C are reported. The effects of copper slag and phosphorus slag on the phase composition, heat release and compressive strength were investigated. The phase composition was analysed by X-ray powder diffraction. The results show that the copper slag and phosphorus slag can lower the burn temperature of the clinker and promote the coexistence of C{sub 3}S and C{sub 4}A{sub 3} S-bar . The quality of clinker produced at 1300 °C is satisfactory. The compressive strength of mortar curing at 28 d is higher than that of P·II 52.5.

36 MATERIALS SCIENCE↗

Characterization of Uranium-Contaminated Sediments From Beneath A Nuclear Waste Storage Tank From Hanford, Washington: Implications for Contaminant Transport and Fate

The concentration and distribution of uranium (U) in sediment samples from three boreholes recovered near radioactive waste storage tanks at Hanford, Washington State, USA, were determined in detail using bulk and micro-analytical techniques. The source of contamination was a plume that contained an estimated 7000 kg of dissolved U that seeped into the subsurface as a result of an accident that occurred during filling of tank BX-102. The desorption character and kinetics of U were also determined by experiment in order to assess the mobility of U in the vadose zone. Most samples contained too little moisture to obtain quantitative information on pore water compositions. Concentrations of U (and contaminant phosphate—P) in pore waters were therefore estimated by performing 1:1 sediment-to-water extractions and the data indicated concentrations of these elements were above that of uncontaminated “background” sediments. Further extraction of U by 8 N nitric acid indicated that a significant fraction of the total U is relatively immobile and may be sequestered in mobilization-resistant phases. Fine- and coarse-grained samples in sharp contact with one another were sub-sampled for further scrutiny and identification of U reservoirs. Segregation of the samples into their constituent size fractions coupled with microwave-assisted digestion of bulk samples showed that most of the U contamination was sequestered within the fine-grained fraction. Isotope exchange ( 233 U) tests revealed that ~51 to 63% of the U is labile, indicating that the remaining fund of U is locked up in mobilization-resistant phases. Analysis by micro-X-Ray Fluorescence and micro-X-Ray Absorption Near-Edge Spectroscopy (μ-XRF and μ-XANES) showed that U is primarily associated with Ca and is predominately U(VI). The spectra obtained on U-enriched “hot spots” using Time-Resolved Laser-Induced Fluorescence Spectroscopy (TRLIFS) provide strong evidence for uranophane-type [Ca(UO 2 ) 2 (SiO 3 OH) 2 (H 2 O) 5 ] and uranyl phosphate [Ca(UO 2 ) 2 (PO 4 ) 2 (H 2 O) 10-12 ] phases. These data show that disseminated micro-precipitates can form in narrow pore spaces within the finer-grained matrix and that these objects are likely not restricted to lithic fragment environments. Uranium mobility may therefore be curtailed by precipitation of uranyl silicate and phosphate phases, with additional possible influence exerted by capillary barriers. Consequently, equilibrium-based desorption models that predict the concentrations and mobility of U in the subsurface matrix at Hanford are unnecessarily conservative.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Origin of sulfide replacement textures in lunar breccias. Implications for vapor element transport in the lunar crust

Lunar samples 67016,294, 67915,150, and 67016,297 represent clasts of Mg-suite and ferroan anorthosite lithologies that have interacted with a S-rich vapor. Numerous studies have speculated on the composition and source of these 'fluids', their capability for the transport of vapor-mobilized elements, and the scale and environment under which these types of process occurred. These models all assumed a Moon with a very 'dry' mantle, crust, and surface. The olivine in these lithologies is partially to totally replaced by troilite and low-Ca pyroxene. The troilite makes up 30-54 vol% of the troilite + low-Ca pyroxene pseudomorphs after olivine. Other silicates and oxides in the assemblages have experienced post-magmatic reequilibration (pyroxene exsolution, recrystallization, 'exsolution' of ilmenite in spinel). The troilite also occurs in veins cross cutting individual phases and metamorphic textures. The sulfide veining and replacement features are restricted to individual clasts and do not cut across the matrix surrounding the clasts, and thus predate the breccia-forming event. The proportion of troilite to low-Ca pyroxene and silicate chemistries indicate that simple reactions (such as olivine + S{sub 2} {leftrightarrow} low-Ca pyroxene + troilite + O{sub 2}) do not adequately represent the replacement process. The sulfides have compositions that are similar to those found in mare basalts. In particular, the sulfides generally are enriched in Co relative to Ni. Exsolution of Ni-Co-Cu in the sulfides is distinctly different between the breccias and mare basalts and suggests a different cooling or crystallization (melt versus vapor) history. The sulfur isotopic composition of the vein and replacement troilite ranges from approximately {delta}{sup 34}S = -1.0{per_thousand} to -3.3{per_thousand}. Based on our observations, it appears that the model suggested by Norman et al. (1995) is the most appropriate for the origin of the troilite veining and troilite-pyroxene pseudomorphs after olivine. Our data add significant definition to this model. This process occurs in the relatively shallow lunar crust on a scale that involves vapor interaction with multiple plutonic lithologies of various ages and compositions. These reactions occur at distinct conditions of f{sub S{sub 2}}, f{sub O{sub 2}}, and temperature. The reacting vapor is S-rich, and perhaps low in H. The reduction of the oxides in the clasts was not a product of H-streaming as has been suggested for similar textures in lunar rocks, but more likely related to 'S-streaming'. These vapors had the capability to transport chalcophile-siderophile elements. However, a proportion of the minor elements making up the troilite (Fe, Ni, Co) did come directly from the olivine being replaced. Further, there is evidence to suggest minor mobility of Mg from the olivine pseudomorphs into the adjacent pyroxene. One of the heat sources driving the transport of elements is closely tied to the emplacement of magmas into the shallow lunar crust. These intrusions were either the source for the S or provided heat to remobilized troilite already in the lunar crust. The process that drove the derivation of the S-rich volatiles was instrumental in fractionating the isotopic composition of S. The enrichment of S{sup 32} in the vapor phase may be attributed to either the stable S species during degassing (COS, S{sub 2} and CS{sub 2}) or the high-temperature partial breakdown of troilite in the shallow crust.

58 GEOSCIENCES↗

Reduction of Eu{sup 3+} to Eu{sup 2+} in MAl{sub 2}Si{sub 2}O{sub 8} (M=Ca, Sr, Ba) in air condition

In general, the reduction of Eu{sup 3+} to Eu{sup 2+} in solids needs an annealing process in a reducing atmosphere. In this paper, it is of great interest and importance to find that the reduction of Eu{sup 3+} to Eu{sup 2+} can be realized in a series of alkaline-earth metal aluminum silicates MAl{sub 2}Si{sub 2}O{sub 8} (M=Ca, Sr, Ba) just in air condition. The Eu{sup 2+}-doped MAl{sub 2}Si{sub 2}O{sub 8} (M=Ca, Sr, Ba) powder samples were prepared in air atmosphere by Pechini-type sol-gel process. It was found that the strong band emissions of 4f{sup 6}5d{sup 1}-4f{sup 7} from Eu{sup 2+} were observed at 417, 404 and 373 nm in air-annealed CaAl{sub 2}Si{sub 2}O{sub 8}, SrAl{sub 2}Si{sub 2}O{sub 8} and BaAl{sub 2}Si{sub 2}O{sub 8}, respectively, under ultraviolet excitation although the Eu{sup 3+} precursors were employed. In addition, under low-voltage electron beam excitation, Eu{sup 2+}-doped MAl{sub 2}Si{sub 2}O{sub 8} also shows strong blue or ultraviolet emission corresponding to 4f{sup 6}5d{sup 1}-4f{sup 7} transition. The reduction mechanism from Eu{sup 3+} to Eu{sup 2+} in these compounds has been discussed in detail. - Graphical abstract: It is of great importance to find that the reduction of Eu{sup 3+} to Eu{sup 2+} can be realized in a series of alkaline-earth metal aluminum silicates MAl{sub 2}Si{sub 2}O{sub 8} (M=Ca, Sr, Ba) just in air condition.

36 MATERIALS SCIENCE↗

Grafting of organosilane derived from 3-glycidoxypropyltrimethoxysilane and thiourea onto magnesium phyllosilicate by sol-gel process and investigation of metal adsorption properties

A layered inorganic-organic magnesium silicate (Mg-GTPS-TU) has been successfully synthesized by using sol-gel based precursor under mild temperature conditions and a new silylaing agent (GTPS-TU) derived from 3-glycidoxypropyltrimethoxysilane (GTPS) and thiourea (TU) as the silicon source. The hybrid material was characterized through elemental analysis, infrared spectroscopy, X-ray diffractometry, thermogravimetry, and carbon and silicon solid-state nuclear magnetic resonance spectroscopy. The result confirmed the attachment of organic functionality to the inorganic silicon network. The inter-lamellar distance for the hybrid material was found to be 18.8 A. Metal adsorption characteristics follows Cr(III) >Mn(II)>Zn(II) with more affinity towards Cr(III) in dilute aqueous solution. Evaluation of thermodynamic parameters DELTAH and DELTAS for Cr(III) were found to be 25.44 J mol{sup -1} and 79.9 J mol{sup -1} K{sup -1}, respectively, indicating adsorption process to be endothermic in nature. The negative value of DELTAG indicated the feasibility and spontaneity of ongoing adsorption process at relatively higher temperature. The presence of multiple coordination sites in the attached organic functionality expresses the potentiality of the hybrid material containing new silylating agent for heavy cation removal from eco-system. - Abstract: We report the synthesis and adsorption properties of a layered inorganic-organic magnesium silicate (Mg-GTPS-TU) derived from a new silylaing agent from 3-glycidoxypropyltrimethoxysilane (GTPS) and thiourea (TU) as the silicon source. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly ordered Ti-SBA-15: Efficient H{sub 2} adsorbent and photocatalyst for eco-toxic dye degradation

Highly ordered 2D-hexagonal mesoporous titanium silicate Ti-SBA-15 materials (space group p6mm) have been synthesized hydrothermally in acidic medium employing amphiphilic tri-block copolymer, Pluronic F127 as structure directing agent. Samples are characterized by powder X-ray diffraction, transmission electron microscopy, scanning electron microscopy, FT IR spectroscopy, UV-visible diffuse reflectance measurements, N{sub 2} adsorption/desorption and TG-DTA analysis. XRD and TEM results suggested the presence of highly ordered mesophase with hexagonal pore arrangements. BET surface area for Ti-SBA-15 (924 m{sup 2} g{sup -1}) is considerably higher than the pure silica SBA-15 (611 m{sup 2} g{sup -1}) prepared following the same synthetic route. UV-visible and FT-IR studies suggested the incorporation of mostly tetrahedral titanium (IV) species, along with some six-coordinated sites in the silicate network. This material shows very good H{sub 2} adsorption capacity at higher pressure and excellent catalytic activity in the photocatalytic degradation of ecologically abundant dye methylene blue. - Graphical abstract: Highly ordered 2D-hexagonal mesoporous Ti-SBA-15 materials are synthesized hydrothermally, which show high H{sub 2} adsorption capacity and excellent activity in the photocatalytic degradation of ecologically abundant dye methylene blue.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Elastic anisotropy of ferromagnesian post-perovskite in Earth's D" layer

We report experimental observation of a sizable elastic anisotropy in a polycrystalline sample of ferromagnesian silicate in post-perovskite (ppv) structure. Using a novel composite X-ray transparent gasket to contain and synthesize ppv in a panoramic diamond-anvil cell along with oblique X-ray diffraction geometry, we observed the anisotropic lattice strain and {l_brace}1 0 0{r_brace} or {l_brace}1 1 0{r_brace} slip-plane texture in the sample at 140 GPa. We deduced the elasticity tensor (c{sub ij}), orientation-dependent compressional wave velocities, polarization-dependent shear-wave velocities, and the velocity anisotropy of the silicate ppv. Our results are consistent with calculations and indicate that with sufficient preferred orientation, the elastic anisotropy of this phase can produce large shear-wave splitting.

36 MATERIALS SCIENCE↗

Metallurgical use of glass fractions from waste electric and electronic equipment (WEEE)

Within the European Union, it is estimated that between 8 and 9 million tonnes of waste electric and electronic equipment (WEEE) arises annually, of which television sets and computers account for an important part. Traditionally, Cathode Ray Tubes (CRT) have been used for TVs and computer monitors, but are rapidly being replaced by flat-screen technology. Only part of the discarded CRT glass is being recycled. Primary smelters use large amounts of silica flux to form iron-silicate slag, and can, in most cases, tolerate lead input. Use of discarded CRT glass in copper smelting is a potential alternative for utilization of the glass. The mineralogical composition of a slag sampled during ordinary slag praxis has been compared with that of a mixture of slag and CRT glass when re-melted and slowly cooled. Slag (iron-silicate slag) from Boliden Mineral AB, Sweden, was used for the experiments. Slag and glass have been mixed in various proportions: pure slag, pure glass, 90% slag-10% glass and 65% slag-35% glass, and heated in an inert atmosphere up to 1400 deg. C in a Netzsch Thermal Analysis (TA) instrument. The re-melted material has been analyzed using X-ray diffraction (XRD) and scanning electron microscopy (SEM) to determine changes in mineralogical composition after mixing with glass. The results show that the main mineralogical component of the slag is fayalite; the CRT glass is amorphous. The main crystalline phases of the slag do not change with addition of glass. An amorphous phase appears when the addition of glass is increased, which gives the sample a different structure.

36 MATERIALS SCIENCE↗

Changes in mineralogical and leaching properties of converter steel slag resulting from accelerated carbonation at low CO{sub 2} pressure

Highlights: > Accelerated carbonation studied to improve environmental properties of steel slag. > Carbonation found to occur predominantly at surface of the steel slag grains. > Combined geochemical modelling and mineral analysis revealed controlling processes. > Enhanced V-leaching with di-Ca silicate (C2S) dissolution identified as major source. > Identified mineral transformations provide guidance for further quality improvement. - Abstract: Steel slag can be applied as substitute for natural aggregates in construction applications. The material imposes a high pH (typically 12.5) and low redox potential (Eh), which may lead to environmental problems in specific application scenarios. The aim of this study is to investigate the potential of accelerated steel slag carbonation, at relatively low pCO{sub 2} pressure (0.2 bar), to improve the environmental pH and the leaching properties of steel slag, with specific focus on the leaching of vanadium. Carbonation experiments are performed in laboratory columns with steel slag under water-saturated and -unsaturated conditions and temperatures between 5 and 90 {sup o}C. Two types of steel slag are tested; free lime containing (K3) slag and K1 slag with a very low free lime content. The fresh and carbonated slag samples are investigated using a combination of leaching experiments, geochemical modelling of leaching mechanisms and microscopic/mineralogical analysis, in order to identify the major processes that control the slag pH and resulting V leaching. The major changes in the amount of sequestered CO{sub 2} and the resulting pH reduction occurred within 24 h, the free lime containing slag (K3-slag) being more prone to carbonation than the slag with lower free lime content (K1-slag). While carbonation at these conditions was found to occur predominantly at the surface of the slag grains, the formation of cracks was observed in carbonated K3 slag, suggesting that free lime in the interior of slag grains had also reacted. The pH of the K3 slag (originally pH {+-} 12.5) was reduced by about 1.5 units, while the K1 slag showed a smaller decrease in pH from about 11.7 to 11.1. However, the pH reduction after carbonation of the K3 slag was observed to lead to an increased V-leaching. Vanadium leaching from the K1 slag resulted in levels above the limit values of the Dutch Soil Quality Decree, for both the untreated and carbonated slag. V-leaching from the carbonated K3 slag remained below these limit values at the relatively high pH that remained after carbonation. The V-bearing di-Ca silicate (C2S) phase has been identified as the major source of the V-leaching. It is shown that the dissolution of this mineral is limited in fresh steel slag, but strongly enhanced by carbonation, which causes the observed enhanced release of V from the K3 slag. The obtained insights in the mineral transformation reactions and their effect on pH and V-leaching provide guidance for further improvement of an accelerated carbonation technology.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Atomic Origins of the Self-Healing Function in Cement–Polymer Composites

Motivated by recent advances in self-healing cement and epoxy polymer composites, we present a combined ab initio molecular dynamics and sum frequency generation (SFG) spectroscopy study of a calcium-silicate-hydrate/polymer interface. On stable, low-defect surfaces, the polymer only weakly adheres through coordination and hydrogen bonding interactions and can be easily mobilized towards defected surfaces. Conversely, on fractured surfaces, the polymer strongly anchors through ionic Ca-O bonds resulting from the deprotonation of polymer hydroxyl groups. In addition, polymer S-S groups are turned away from the cement/polymer interface, allowing for the self-healing function within the polymer. The overall elasticity and healing properties of these composites stem from a flexible hydrogen bonding network that can readily adapt to surface morphology. The theoretical vibrational signals associated with the proposed cement-polymer interfacial chemistry were confirmed experimentally by SFG spectroscopy.

ab initio molecular 8 dynamics↗