Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SATELLITE COMMUNICATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

A new fabrication method for precision antenna reflectors for space flight and ground test

The use of higher frequencies on communications satellites has led to the requirement for increasingly precise antenna reflectors for use in space. Typical industry fabrication methods for space antenna reflectors employ successive molding techniques for reflector face sheets and a final fit-up to a master mold in order to achieve the required accuracies. However, new missions at much higher frequencies will require greater accuracies than may be achievable using these present methods. A new approach for the fabrication of ground-test antenna reflectors is to machine the reflective surface into a stainless steel and fiberglass composite structure. A 2.7-m diameter ground-test antenna reflector fabricated using this method has an accuracy of better than 0.013 mm (0.0005 in.) rms. A similar design concept for a solid surface reflector for use on spacecraft would involve fabrication in a similar manner but using space-qualified materials. This report describes the design, analysis, and fabrication of the 2.7-m-diameter precision antenna reflector for antenna ground test and the extension of this technology to precision space antenna reflectors.

Sharp, G. Richard↗

Spacecraft designs for VSAT networks

Results are presented from a study to determine the commercial applications of the technology developed for ACTS. Two systems are discussed: point-to-point transmission of T1 (1.544 Mb/s) data channels using Very Small Aperature Terminals, and point-to-point transmission of single channel per carrier data from extremely small ground terminals. Satellite communications systems designed for each of these applications are described.

Stern, Alan L.↗

K-band TWT using new diamond rod technology

A 75-W CW helix TWT for satellite communications systems is being developed to operate at 20 GHz with an efficiency goal of 60 percent. A nonbrazed nonbonded diamond rod fabrication technique is used to develop the helix-type TWT. Techniques to enhance TWT efficiency are described, including the incorporation of a velocity tapered helix and a multistage graphite collector. Results from testing a breadboard TWT show a CW output power greater than 100 W and a 54.6 overall efficiency.

Aldana, S. L.↗

Qualification and life testing of a flight design hydrazine arcjet system

This paper describes the design and the requirements of a low-power hydrazine arc jet system and presents the results of tests on the system's performance, vibration, and lifetime. The system consists of an arcjet, catalyst bed, power control unit, and interconnecting power cable. Operating at 1.4 kW input power, the system provides a minimum of 450 sec mission average specific impulse, yielding greater than a 100 kg propellant savings over standard monopropellant or bipropellant systems used on communication satellites.

Knowles, S. C.↗

On-board switching and processing

Findings from NASA's space electronics division's (SED's) advanced systems studies related to future communications satellite services that will require onboard switching and processing technology are reviewed. SED's digital signal switching and processing technology program is reviewed. This program responds to specific systems technology development needs for enabling commercial development of future satellite services. The technologies include: modulators, demodulators, and forward error-correction hardware for space- and ground-based applications; onboard information switching and processing, onboard network control, and health monitoring; and cost-efficient ground terminals. The in-house systems integration, test, and evaluation (SITE) project, which includes a laboratory testbed for evaluating technology in a simulated systems environment, is reviewed.

Harrold, Joseph L.↗

Space station

The history of American space flight indicates that a space station is the next logical step in the scientific pursuit of greater knowledge of the universe. The Space Station and its complement of space vehicles, developed by NASA, will add new dimensions to an already extensive space program in the United States. The Space Station offers extraordinary benefits for a comparatively modest investment (currently estimated at one-ninth the cost of the Apollo Program). The station will provide a permanent multipurpose facility in orbit necessary for the expansion of space science and technology. It will enable significant advancements in life sciences research, satellite communications, astronomy, and materials processing. Eventually, the station will function in support of the commercialization and industrialization of space. Also, as a prerequisite to manned interplanetary exploration, the long-duration space flights typical of Space Station missions will provide the essential life sciences research to allow progressively longer human staytime in space.

Stewart, Donald F.↗

Olympus propagation studies in the US: Propagation terminal hardware and experiments

Virginia Tech is performing a comprehensive set of propagation measurements using the Olympus satellite beacons at 12.5, 20, and 30 GHz. These data will be used to characterize propagation conditions on small earth terminal (VSAT)-type networks for next generation small aperture Ka-band systems. The European Space Agency (ESA) satellite Olympus was launched July 12, 1989. The spacecraft contains a sophisticated package of propagation beacons operating at 12.5, 19.77, and 29.66 GHz (referred to as 12.5, 20, and 30 beacons). These beacons cover the east coast of the United States with sufficient power for attenuation measurements. The Virginia Satellite Communications Group is completing the hardware construction phase and will begin formal data collection in June.

Stutzmzn, Warren L.↗

Trellis coded modulation for transmission over fading mobile satellite channel

The combination of trellis coding and multiple phase-shift keyed (MPSK) signaling with asymmetry (nonuniform spacing) to the signal set is disclosed with regard to its suitability for a fading mobile satellite communication channel. For MPSK signaling, introducing nonuniformity in the phase spacing between signal points provides an improvement in performance over that achievable with trellis codes symmetric MPSK signaling, all this without increasing the average or peak power, or changing the bandwidth constraints imposed on the system. Block interleaving may be used to reduce error and pilot tone(s) may be used for improving the error correction performance of the trellis decoder in the presence of channel fading.

Simon, Marvin K.↗

High vacuum facility for hydrazine thruster testing

An ongoing modification is described of a large vacuum chamber to accommodate the ignition of an arcjet hydrazine thruster while maintaining a vacuum level of 1 x 10(exp -5) torr or less. The vacuum facility consists of a 20 ft stainless steel vacuum tank with an internal LN2 shroud, four 35 in. cryopumps and an 8 in. turbopump. To maintain a vacuum level of 1 x 10(exp -5) torr or less, 900 sq ft of liquid helium (LHe) shroud surface was installed to maintain the vacuum level and pumping requirements. A vacuum level of 1 x 10(exp -5) torr or less will allow the hydrazine thrust to exit the thruster nozzle and radiate into a space type environment so that the plume flow field can be analyzed and compared to the analytical model density distribution profile. Some other arcjet thruster characteristics measured are the electromagnetic interference (EMI) and exhaust contamination. This data is used to evaluate if the arcjet thruster with its high specific impulse in comparison to current chemical propulsion thruster can be used for the next generation of communication satellites.

Neary, Patrick F.↗

A new fabrication method for precision antenna reflectors for space flight and ground test

Communications satellites are using increasingly higher frequencies that require increasingly precise antenna reflectors for use in space. Traditional industry fabrication methods for space antenna reflectors employ successive modeling techniques using high- and low-temperature molds for reflector face sheets and then a final fit-up of the completed honeycomb sandwich panel antenna reflector to a master pattern. However, as new missions are planned at much higher frequencies, greater accuracies will be necessary than are achievable using these present methods. A new approach for the fabrication of ground-test solid-surface antenna reflectors is to build a rigid support structure with an easy-to-machine surface. This surface is subsequently machined to the desired reflector contour and coated with a radio-frequency-reflective surface. This method was used to fabricate a 2.7-m-diameter ground-test antenna reflector to an accuracy of better than 0.013 mm (0.0005 in.) rms. A similar reflector for use on spacecraft would be constructed in a similar manner but with space-qualified materials. The design, analysis, and fabrication of the 2.7-m-diameter precision antenna reflector for antenna ground tests and the extension of this technology to precision, space-based antenna reflectors are described.

Sharp, G. Richard↗

Atomic oxygen degradation of Intelsat 4-type solar array interconnects: Laboratory investigations

A Hughes 506 type communication satellite belonging to the Intelsat organization was marooned in low Earth orbit on March 14, 1990, following failure of the Titan third stage to separate properly. The satellite, Intelsat VI, was designed for service in geosynchronous orbit and contains several material configurations which are susceptible to attack by atomic oxygen. Analysis showed the silver foil interconnects in the satellite photovoltaic array to be the key materials issue because the silver is exposed directly to the atomic oxygen ram flux. The results are reported of atomic oxygen degradation testing of Intelsat VI type silver foil interconnects both as virgin material and in a configured solar cell element. Test results indicate that more than 80 pct. of the original thickness of silver in the Intelsat VI solar array interconnects should remain after completion of the proposed Space Shuttle rescue and/or reboost mission.

Koontz, S. L.↗

Report of the Advisory Committee on the Future of the US Space Program

The United States' civil space program was rather hurriedly formulated some three decades ago on the heels of the successful launch of the Soviet Sputnik. A dozen humans have been placed on the Moon and safely returned to Earth, seven of the other eight planets have been viewed at close range, including the soft landing of two robot spacecraft on Mars, and a variety of significant astronomical and other scientific observations have been accomplished. Closer to Earth, a network of communications satellites has been established, weather and ocean conditions are now monitored and reported as they occur, and the Earth's surface is observed from space to study natural resources and detect sources of pollution. Problems and perspectives of the program are given as seen by the committee. The committee finds that there are nine concerns about the space program which are deserving of attention. The responsibilities of the agency are given. The space agenda becomes one of what can and should the U.S. afford for its space program. Also given is a concept of what the committee believes is a balanced space program. The programs international role is defined and some final observations and recommendations are made.

Source record↗

Electrode erosion in low power arcjet thrusters

Low power arcjet thrusters (0.5 to 3 kW) are currently being considered for North-South station keeping of geosynchronous communication satellites. The erosion mechanisms of cathodes in these thrusters are not well understood. The experimental set-up to produce a steady state electric arc in a gas flow is described and some preliminary theoretical results on cathode erosion are presented.

Ghosh, A.↗

Mass comparisons of electric propulsion systems for NSSK of geosynchronous spacecraft

A model was developed and exercised to allow wet mass comparisons of three axis stabilized communication satellites delivered to geosynchronous transfer orbit. The mass benefits of using advanced chemical propulsion for apogee injection and north-south stationkeeping (NSSK) functions or electric propulsion (hydrazine arcjets and xenon ion thrusters) for NSSK functions are documented. A large derated ion thrusters is proposed which minimizes thruster lifetime concerns and qualification test times when compared to those of smaller ion thrusters planned for NSSK applications. The mass benefits, which depend on the spacecraft mass and mission duration, increase dramatically with arcjet specific impulse in the 500 to 600 s range, but are nearly constant for the derated ion thruster operated in the 2300 to 3000 s range. For a given mission, the mass benefits with an ion system are typically double those of the arcjet system; however, the total thrusting time with arcjets is less than 1/3 that with ion thrusters for the same thruster power. The mass benefits may permit increases in revenue producing payload or reduce launch costs by allowing a move to a smaller launch vehicle.

Rawlin, Vincent K.↗

The data distribution satellite system

The Data Distributed Satellite (DDS) will be capable of providing the space research community with inexpensive and easy access to space payloads and space data. Furthermore, the DDS is shown to be a natural outgrowth of advances and evolution in both NASA's Space Network and commercial satellite communications. The roadmap and timescale for this evolution is described along with key demonstrations, proof-of-concept models, and required technology development that will support the projected system evolution toward the DDS.

Bruno, Ronald C.↗

Economic consequences of commercial space operations

The potential economic benefits generated from increased industry involvement and investment in space activities and the subsequent cost implications are discussed. A historical overview of commercial industry involvement in space is given and sources of new economic growth in space are discussed. These include communications satellites, small satellites, positioning and navigation services, space transportation and infrastructure, remote sensing, and materials processing in space such as the manufacturing of protein crystals and zeolites. Macroeconomic trends and principles such as limits on technology trade, eased restrictions on international joint ventures, foreign investments in U.S. firms, and increased foreign competition are discussed. Earth observations and mapping are considered. Opportunities for private sector involvement in building space infrastructure and space transportation are highlighted.

Stone, Barbara A.↗

Industry-university cooperation/research

The paper concentrates on the commercial development of space programs through cooperative research with the U.S. universities and industry. The origins of the programs are discussed, beginning with the Communication Satellite Act of 1963. The National Space Policy is outlined, and the creation of NASA's Office of Commercial Programs is emphasized, along with its Centers for the Commercial Development of Space. It is noted that the centers are consortia of university, industry, and government involved in commercial-space-technology database development and research and testing of potentially valuable products and services. The center titles, locations, and brief descriptions for such area of research as remote sensing, life sciences, materials processing, space power, space propulsion, materials and space structures, and automation and robotics centers are listed, along with some results of the programs.

Whitten, Raymond P.↗

Bit error rate testing of fiber optic data links for MMIC-based phased array antennas

The measured bit-error-rate (BER) performance of a fiber optic data link to be used in satellite communications systems is presented and discussed. In the testing, the link was measured for its ability to carry high burst rate, serial-minimum shift keyed (SMSK) digital data similar to those used in actual space communications systems. The fiber optic data link, as part of a dual-segment injection-locked RF fiber optic link system, offers a means to distribute these signals to the many radiating elements of a phased array antenna. Test procedures, experimental arrangements, and test results are presented.

Shalkhauser, K. A.↗