SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Resource assessment and recovery of critical materials from shale sources, with a focus on black shales. Bakken shale focus, with multi-modal imaging and analysis techniques described to show critical mineral extractions with a dilute citric acid flow reactions.
In this presentation, we show a quadratically constrained optimization model to assess how operational decisions in a produced water network can meet minimum Lithium recovery concentration requirements while minimizing operating costs. We also discuss the need for global optimization algorithmic tools and how we look to address such challenges.
This talk presents the design of operationally flexible diafiltration membrane systems for Li/Co recovery, and applies robust optimization methodologies using these flexible systems to generate optimal designs immune to membrane manufacturing variability and uncertain process inlet conditions. The results highlight the use of robust optimization to find design strategies and insights that may reduce technical risks arising from model uncertainties.
The data are summarized in the slides for a poster as presented at the 2024 AIChE annual meeting in San Diego, California, USA. The slides summarize our work on the PrOMMiS project over the past year. The slides describe the systematic design and optimization of a flowsheet for the recovery of critical minerals and rare earth elements. Then, it summarizes the results of our benchmarking of surrogate modeling methodologies for the optimization of these flowsheets.
Primary cementing is the most important operation performed on a subterranean well. Cement, placed in the annulus between the casing and the formations, serves as a hydraulic seal preventing fluids and gas migrations, protecting steel casing from corrosion, and supporting the well structure. Poor cementing jobs can be directly responsible for wells not reaching their full capacity, casing corrosion, compromised well integrity and, in the worst-case scenarios, well collapse. Geothermal, thermal recovery, and carbon storage wells offer environments that are especially difficult for cements to survive while the required lifespan of these wells can be years. In these wells currently used cements cannot provide durable well integrity, and new solutions are necessary. The necessity of stabilizing the electric grid, increasing its flexibility, and providing energy on demand will further expand the market of durable cement solutions for applications in high-temperature underground reservoir thermal energy storage wells (HT RTES). The design challenges of special cement systems for such wells originate from chemistry limitations of currently used well cements, aggressive environments, temperature and repeated shock conditions associated with them, and very weak formations that are not uncommon in these wells. During the last 70 years the most common systems for thermal-well construction have been Ordinary Portland Cement (OPC) (absolute majority of the wells), silica-lime system, and high aluminum cement-containing formulations. The major issues of calcium-silicate hydrates, that form during the hydration of OPC resulting in hardened material, are their poor chemical resistance to acids due to the calcium interactions with acid anions followed by its eventual dissolution, even in mild acids, such as carbonic acid from CO 2 dissolution, and inadequate bonding to the steel causing serious casing corrosion problems (Sugama & Pyatina, 2019). Performance of OPC-based cement may be significantly improved with organic additives; however, those are limited by their temperature stability. An alternative to calcium-silicate cement was developed by BNL and commercialized by Halliburton as ThermaLock TM cement. Calcium-aluminate-phosphate-based chemistry of the material allowed overcoming acid-resistance problems of OPC, especially in CO 2 -rich geothermal environments. In 2012-2015, building upon this experience, BNL developed Thermal Shock Resistant Cement (TSRC) with the support of Geothermal Technology Office (GTO) of DOE. TSRC has high-temperature stable chemistry, superior properties of cement-metal casing bond and corrosion protection (4-times better than currently used OPC-based formulation), significantly outperforms common well-cements in thermal-shock tests, has self-healing properties, and like ThermaLock TM is CO 2 resistant incorporating carbonate ions into stable hydrates (Gill et al., 2012).
Under the Energy & Environmental Research Center’s (EERC’s) ~$\$$22 million Phase II Brine Extraction and Storage Test (BEST) Program, a multimillion-dollar brine treatment technology test bed facility was established in western North Dakota to provide a platform for evaluating developing technologies and approaches for brine treatment and volume reduction. The initial facility, and associated research effort, was funded by the U.S. Department of Energy (DOE), with in-kind contributions provided by several industry participants and the state of North Dakota. Since its opening, the Brine Technology Test Facility (BTTF) has supported performance evaluations of desalination technologies capable of treating high-salinity produced water (PW) and enabled data collection for multiple approaches of PW management and critical material recovery. As part of the decommissioning process for the original project, facility ownership and liability were transferred to Select Water, which is providing the EERC with a continuing site access option for state or federal research and/or commercial technology development. This report documents the findings from a design study conducted by the EERC and the engineering firm that was originally contracted to design and construct the facility (Advanced Engineering and Environmental Services, LLC [AE2S]) that evaluated the current status of BTTF and its systems and developed a retrofit design to increase the facility’s capabilities through automation and modularization of its PW treatment infrastructure. The proposed retrofit will provide DOE and industry with an expanded range of conditioned PW that can be produced at the facility for evaluating fit-for-purpose water treatment technologies, online instrumentation for brine chemistry determination, and systems that recover critical materials like lithium and magnesium. The current facility consists of an 9600-square-foot facility that includes a 40-foot by 65-foot Class 1, Division 2-rated demonstration area and associated control rooms and lab-ready space capable of sourcing oil and gas PW and wastewater from industrial sources or tailoring brine compositions up to 300,000 mg/L total dissolved solids (TDS) and supplying them at rates up to 25 gpm for extended-duration technology demonstrations. The colocation of the facility with Select Water’s water management facilities allows for access and unloading of more than 10,000 bbl/day of trucked water delivered to site and associated access to on-site Class I and Class II brine disposal wells and nearby hazardous waste landfills operated and/or contracted by Select Water to dispose of concentrate and/or effluents associated with the testing.
These slides present work jointly completed by Tasks in PrOMMiS. The first half of the presentation motivates the importance of critical materials for national security and how the recovery of critical minerals via membrane separations can be more cost effective than currently used technology. The second half of the presentation presents cost-optimal results for the custom cost model for diafiltration using the superstructure flowsheet developed by CMU. These results highlight how PSE can inform process targets (i.e., product purity targets) and suitable design strategies for scaled-up membrane cascades.
The increasing need for optimal and sustainable use of cryogenic resources to support Fermilab’s scientific mission has highlighted the necessity of improving the Laboratory’s helium management practices. An assessment of cryogenic test facilities identified the Technical Division’s Industrial Building 3a (IB3A) as a key site requiring upgrades to integrate a helium recovery system. The IB3A facility is essential for characterizing and testing superconductors, cables, and coils for various R&D projects, including the US High-Luminosity LHC Accelerator Upgrade Project (AUP), Mu2e, and other external collaborations. Currently, the facility relies on 500 L helium Dewars and vents the vaporized helium directly into the atmosphere, leading to significant helium loss. Given the non-renewable nature of helium, recovering and reusing this resource is critical for the sustainability of Fermilab’s operations. To address this challenge, a project has been initiated to connect IB3A to an existing helium purification station and refrigeration system located in another building via a dedicated pipeline pass over the roof of several buildings. This solution will enable the efficient capture of vented helium, its transfer to the purification station, and subsequent liquefaction for reuse in future operations. The project includes a detailed design phase, specifying the pipeline route, flow control mechanisms, and integration with the existing cryogenic infrastructure, followed by phased implementation and commissioning. By implementing this pipeline connection and upgrading IB3A, Fermilab aims to significantly reduce helium waste, lower operational costs, and align with its commitment to sustainability. This initiative provides a model for resource-efficient cryogenic operations and reinforces the Laboratory’s capacity to support its science mission for the long term.
This study models the transition of CO 2 -enhanced oil recovery (CO 2 -EOR) fields to dedicated carbon storage using a generalized reservoir model informed by real field data, SACROC. Through scenario-based simulations, the work evaluates how reservoir depletion levels, boundary conditions, fluid properties, and domain size affect pressure buildup, CO 2 plume migration, and long-term containment performance. The results inform practices for repurposing oil fields into reliable CO 2 storage sites.
• Neutralization and solidification is the last step in the Aqueous Recovery Process • All waste streams are acidic and must be neutralized before being combined with grout in a solidification drum • The neutralization tank is a 250 L, 24” diameter, 45” high tank • The batch tank is a 125 L tank • The solidification drum is a 55-gallon drum, pre-filled with grout & a sacrificial mixing paddle • Normal mass in neutralization tank: 50 g Pu • Normal mass in batch tank or drum: 25 g Pu
Microbes can be used for biomining rare earth elements (REEs) from abandoned coal-mine drainage (AMD) solids. Domestically Pennsylvania has ~11,000 abandoned mines, with ~500 AMD passive remediation systems (PRSs) that precipitate REE rich solids. In passive systems, REEs, co-precipitate with manganese (Mn), accumulating as a valuable leachate when resolubilized. REEs like lanthanum (La) are used in battery technology. Microbial metabolism that co-resolubilize Mn and REEs could result in an affordable release process that does not require the addition of hazardous chemical additives. Microbial sequestering of La can be used for selective purification from a mixed REE composition. Currently, the microbial mechanisms that contribute to mass REE resolubilization and selective sequestration are poorly understood. We have isolated bacteria (Bacillus mycoides JR07 and Bacillus pseudomycoides KB7) that solubilize Mn oxide, La oxide, and AMD solids by acidogenesis. Preliminary results show methylotrophic bacterial isolate B3 can take up soluble La, which may have a potential application in the purification of La from a mixed REE leachate. Determining the microbial metabolism and genes involved in the REE resolubilization and selective biomining of La is crucial to optimize the biomining of AMD solids. Our work addresses the growing need to develop novel REE recovery methods from domestic sources.
Microbunched electron Cooling (MBEC), a type of Coherent electron Cooling (CeC), is a possible way to cool high energy protons; such an electron cooler can be driven by an energy recovery linac (ERL). The beam parameters of this design are based on cooling 275 and 100 GeV protons at the Electron-Ion Collider (EIC), requiring 150 and 55\,MeV electrons, respectively. If implemented, a high energy cooler would serve to increase the average luminosity of the collider by mitigating the emittance growth caused by various processes. This ERL is designed to deliver a bunch charge of 1\,nC, an average current of 100\,mA, and strict requirements on the transverse emittance, slice energy spread, and longitudinal distribution profile. This paper covers the current state of the design.
Conference presentation at at 22nd European IOR+ Symposium, The Hague, Netherlands, October 2–4, 2023. This study explored the sensitivity of the net life cycle greenhouse gas (GHG) emissions of a CO 2 -enhanced oil recovery (CO 2 -EOR) system to three critical input parameters: i) CO 2 capture efficiency (70%, 80%, 90%, and 95%), ii) electricity grid mix emission factor (400, 500, 600, and 700 kgCO 2 e/MWh), and iii) net CO 2 utilization rate (315, 421, 526, 789, and 1052 kgCO 2 /bbl [6, 8, 10, 15, and 20 Mcf/bbl]).
This project explores the use of Wiener deconvolution to recover an original signal that has been distorted by a known transfer function and by noise. A simulated Gaussian pulse was used as the test signal, and a transfer function was applied in the frequency domain to model system distortion. Controlled noise was then introduced to approximate real-world signal degradation. A Wiener filter was implemented to reverse the effects of the transfer function while minimizing the influence of noise. The recovered signal was compared to the original pulse to evaluate the effectiveness of the filter. Results demonstrate that Wiener deconvolution offers a stable and effective approach to signal recovery, balancing complete transfer function inversion and noise suppression.
recovery of hydrogen from produced water waste stream
Oil and gas recovery increasingly relies on stimulation and production strategies that involve complex interactions between rock deformation, fractures, and fluid flow underground. Conventional modeling approaches often simplify or separate these effects, which can limit their ability to accurately predict performance in fractured or geologically complex reservoirs.
Presentation about cerium and manganese speciation in acid mine drainage treatment solids and the implications for recovery rare earth elements from unconventional feedstocks.
In this study, we present beam dynamics simulations of the Strong Hadron Cooling (SHC) Energy Recovery Linac (ERL) that incorporate a feedback (FB) system designed to mitigate Beam Breakup (BBU) instabilities. The FB effectively suppresses BBU and increases the threshold current by roughly an order of magnitude. Our analysis revealed the aliasing behavior of the dominant higher-order mode (HOM) and its suppression by the FB, as evident from the power spectral density (PSD) of the beam centroid’s horizontal motion at the exit of the final linac section. Although the FB system— even when affected by noise—successfully reduced the BBU peak, it also amplified the PSD at other frequencies. These results provide important insights into BBU suppression and threshold current enhancement in ERLs.