Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REFLECTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Temperature measurements behind reflected shock waves in air

A radiometric method for the measurement of gas temperature in self-absorbing gases has been applied in the study of shock tube generated flows. This method involves making two absolute intensity measurements at identical wavelengths, but for two different pathlengths in the same gas sample. Experimental results are presented for reflected shock waves in air at conditions corresponding to incident shock velocities from 7 to 10 km/s and an initial driven tube pressure of 1 torr. These results indicate that, with this technique, temperature measurements with an accuracy of + or - 5 percent can be carried out. The results also suggest certain facility related problems.

Bader, J. B.↗

Spectral reflectance of 72275 from Boulder 1, Station 2, Apollo 17

Spectral reflectance measurements were made of samples 72275,103 (chip) and 72275,98 (saw cuttings). Both the chips and the cuttings consist mainly of friable feldspathic breccia. Sample 72275,103, a chip taken from eastend piece 72275,27, is rich in gray polymict breccia. The saw cuttings were derived from the entire rock, but they are probably strongly biased toward the friable feldspathic matrix material that has been preferentially disaggregated. The spectra of both samples show two prominent absorption bands arising from Fe2(+) in pyroxene. The depths of these bands are large enough to preclude the presence of much glass or opaque material in the samples. From the spectral properties alone, it is clear that the samples are not soil breccias nor vitric breccias, as, of course, has been verified by petrography. The wavelengths of the principal absorption bands plot on the pyroxene trend, indicating that orthopyroxene is spectrally dominant.

Adams, J. B.↗

Flutter tests (IS4) of the 0.0125-scale shuttle reflection plane model 30-OTS in the Langley Research Center 26-inch transonic blowdown tunnel test no. 547

A series of slab wing flutter models with rigid orbiter fuselage, external tank, and SRB models of the space shuttle were tested, in a reflection plane arrangement, in the NASA Langley Research Center's 26-inch Transonic Blowdown Tunnel. Model flutter boundaries were obtained for both a wing-alone configuration and a wing-with-orbiter, tank and SRB configuration. Additional test points were taken of the wing-with-orbiter configuration, as a correlation with the wing-alone condition. A description of the wind tunnel models and test procedures utilized in the experiment are provided.

Kotch, M. A.↗

Reflectance model of a plant leaf

A light ray, incident at 5 deg to the normal, is geometrically plotted through the drawing of the cross section of a soybean leaf using Fresnel's Equations and Snell's Law. The optical mediums of the leaf considered for ray tracing are: air, cell sap, chloroplast, and cell wall. The above ray is also drawn through the same leaf cross section considering cell wall and air as the only optical mediums. The values of the reflection and transmission found from ray tracing agree closely with the experimental results obtained using a Beckman DK-2A Spectroreflectometer. Similarly a light ray, incident at about 60 deg to the normal, is drawn through the palisade cells of a soybean leaf to illustrate the pathway of light, incident at an oblique angle, through the palisade cells.

Kumar, R.↗

Energy transfer in volume-reflecting heat shields

An approximate analytic solution is provided for the unsteady radiative heating of a highly scattering medium under constant heat flux boundary conditions. The accuracy of the method in representing the reflectance, radiative flux, and radiative flux divergence of the materials was also explored, as was the influence of anistropic scattering on these parameters.

Weston, K. C.↗

Reflectance of vegetation, soil, and water

The author has identified the following significant results. The majority of the rangelands of Hidalgo County, Texas are used in cow-calf operations. Continuous year-long grazing is practiced on about 60% of the acreage and some type of deferred system on the rest. Mechanical brush control is used more than chemical control. Ground surveys gave representative estimates for 15 vegetable crops produced in Hidalgo County. ERTS-1 data were used to estimate the acreage of citrus in the county. Combined Kubleka Munk and regression models, that included a term for shadow areas, gave a higher correlation of composite canopy reflectance with ground truth than either model alone.

Wiegand, C. L.↗

Method of applying a mirror reflecting layer to instrument parts

A method follows for applying a mirror reflecting layer to the surfaces of parts, instruments, apparatus, and so on. A brief analysis is presented of the existing methods of obtaining the mirror surface and the advantages of the new method of obtaining the mirror surface by polymer casting mold are indicated.

Alkhanov, L. G.↗

An experimental test of plant canopy reflectance models on cotton

Extensive data on the plant parameters necessary to evaluate any model are presented for a cotton crop. The variation of the bidirectional reflectance function with observer altitude, observer azimuth, and sun altitude angle is presented for a high density cotton crop having leaf index of 19. A comparison with the quantitative behavior obtained from the Suits model is accomplished in the wavelength region from 400 nm to 1050 nm.

Lemaster, E. W.↗

Spectral reflectance and emittance of particulate materials. I - Theory. II - Application and results

The sizes, shapes, and complex refractive indices of particles are calculated in a study of the IR spectral reflectance of a semiinfinite medium composed of irregular particles of different materials. Geometric optics techniques with corrections for additional absorption due to particle edges and asperities is used in scattering and absorption calculations for particles larger than the wavelength. A Lorentz-Lorenz model is used to derive the averaged complex index of the medium, assuming that its individual particles are ellipsoids. Experimental results obtained on a Michelson interferometer for the spectral emittance of particulate mineral materials are compared with theoretical results. Good agreement between the experimental and theoretical results suggests the applicability, in remote IR spectroscopy, of the theoretical concepts applied in this study.

Emslie, A. G.↗

Reflection and refraction of hydromagnetic waves at the magnetopause

Reflection and transmission coefficients of MHD waves are obtained at a stable, plane interface which separates two compressible, perfectly conducting media in relative motion to each other. The coefficients are evaluated for representative conditions of the quiet-time, near-earth magnetopause. The transmission coefficient averaged over a hemispherical distribution of incident waves is found to be 1-2%. Yet the magnitude of the energy flux deposited into the magnetosphere in a day averaged over a hemispherical distribution of waves having amplitudes of say 2-3 gamma, is estimated to be of the order 10 to the 22-nd power erg. Therefore the energy input of MHD waves must contribute significantly to the energy budget of the magnetosphere. The assumption that the boundary surface is a tangential discontinuity with no curvature limits the present theory to hydromagnetic frequencies higher than about .1 Hz.

Verzariu, P.↗

Mathematical models for the reflection coefficients of dielectric half-spaces

The reflection coefficients at normal incidence are found for a large class of one-dimensionally inhomogeneous or stratified half-spaces, which contain a homogeneous half-space. The formulation of the problem involves a combination of the classical boundary value technique, and the nonclassical principle of invariant imbedding. Solutions are in closed form and expressible in terms of Bessel functions. All results are given in terms of the ratio of the distance between free space and the homogeneous half-space to the wavelength in vacuo. One special case is that of an arbitrary number of layers lying on a homogeneous half-space where the dielectric constant of each layer has a constant gradient. A number of other special cases, limiting cases, and generalizations are developed including one in which the thickness of the top layer obeys a probability distribution.

Evans, D. D.↗

A study of the reflection effect in close spectroscopic binary stars

Four W Ursae Majoris-type binaries were investigated using the simple model of blackbody solid spheres. Numerical computations were carried out for the rotationally broadened profiles of spectral lines Sr II (4077.7) and Ca I (4226.7) and the mean radial velocities. These mean velocities at different phases outside eclipses were compared with sinusoidal values of the radial velocity curve for point masses. Within the present accuracy of observations, the reflection effect is small and may be neglected in the analysis of radial velocity curves.

Chen, K.-Y.↗

Nonreciprocal reflection-beam isolators for far-infrared use

Magnetoplasma reflection-beam isolators for submillimeter-wave use are discussed in theory and experiment. The basic device uses the Kerr transverse magnetooptic effect (plane of polarization of the EM wave in the plane of incidence, which is perpendicular to a dc magnetic field) in InSb near room temperature. When the semiconductor slab is covered with a thin dielectric layer acting as a matching transformer, improved performance is predicted and observed at 337 microns, and very efficient isolator performance is predicted for 118 microns. Physical arguments are presented to explain the nonreciprocal phenomenon and lead to better device design.

Kanda, M.↗

Solar albedo and spectral reflectance for Apollo 15 and 16 lunar fines

The spectral directional reflectance of Apollo 15 and 16 fines was obtained for bulk densities of approximately 1000 and 1600 kg/cu m. The solar albedo as a function of illumination was calculated from these results. Comparison of solar albedos shows that Apollo 11, 12, and 15 soils fall into one group and the Apollo 14 and 16 soil results into a second group corresponding to mare or lunar highland materials.

Birkebak, R. C.↗

A reflection model for eclipsing binary stars

A highly accurate reflection model has been developed which emphasizes efficiency of computer calculation. It is assumed that the heating of the irradiated star must depend upon the following properties of the irradiating star: (1) effective temperature; (2) apparent area as seen from a point on the surface of the irradiated star; (3) limb darkening; and (4) zenith distance of the apparent centre as seen from a point on the surface of the irradiated star. The algorithm eliminates the need to integrate over the irradiating star while providing a highly accurate representation of the integrated bolometric flux, even for gravitationally distorted stars.

Wood, D. B.↗

Detection and elimination of reflections in beam-foil target chambers

Description of techniques for detecting and reducing to negligible values beam-radiation reflection and scattering in high vacuum target chambers used in beam foil experiments. It is suggested that all target chambers be checked in the manner described in order to discover and reduce intensity variations that may not be obvious on the usual beam-foil decay curves.

Bickel, W. S.↗

Volume reflecting heat shields for entry into the giant planet atmospheres

The performance of a volume reflecting or backscattering silica heat shield is examined for an entry probe into the severe radiative environments of Saturn, Uranus, and Jupiter. The governing equations for the material response are solved numerically and include the effects of temperature-dependent thermal properties, temperature- and wavelength-dependent radiative properties, and surface recession caused by thermochemical ablation. The influence of the scattering properties on backface temperature is examined, and results are presented which show the required heat-shield thickness for the entry trajectories selected.

Howe, J. T.↗

Reflective Schmidt corrector

A technique based on the use of an off-axis corrector in two orthogonal planes is presented for optimizing the reflective corrector that is to replace the refractive corrector plate of a Schmidt camera in high resolution space astronomy applications. The technique can easily be applied to any off-axis angle depending on configuration, field of view, and focal ratio of the instrument. It is pointed out, however, that the general performance degrades and the field of view shrinks with increasing off-axis angles.

Korsch, D.↗