Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98

Demonstration of Detuning and Wavebreaking Effects on Raman Amplification Effciency in Plasma

A plasma-based resonant backward Raman amplifier/compressor for high power amplification of short laser pulses might, under ideal conditions, convert as much as 90% of the pump energy to the seed pulse. While the theoretical highest possible efficiency of this scheme has not yet been achieved, larger efficiencies than ever before obtained experimentally (6.4%) are now being reported, and these efficiencies are accompanied by strong pulse compression. Based on these recent extensive experiments, it is now possible to deduce that the experimentally realized efficiency of the amplifier is likely constrained by two factors, namely the pump chirp and the plasma wavebreaking, and that these experimental observations may likely involve favorable compensation between the chirp of the laser and the density variation of the mediating plasma. Several methods for further improvement of the amplifier effciency in current experiments are suggested.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Sustainable Waste Tire Derived Carbon Material as a Potential Anode for Lithium-Ion Batteries

The rapidly growing automobile industry increases the accumulation of end-of-life tires each year throughout the world. Waste tires lead to increased environmental issues and lasting resource problems. Recycling hazardous wastes to produce value-added products is becoming essential for the sustainable progress of society. A patented sulfonation process followed by pyrolysis at 1100 °C in a nitrogen atmosphere was used to produce carbon material from these tires and utilized as an anode in lithium-ion batteries. The combustion of the volatiles released in waste tire pyrolysis produces lower fossil CO 2 emissions per unit of energy (136.51 gCO 2 /kW·h) compared to other conventional fossil fuels such as coal or fuel–oil, usually used in power generation. The strategy used in this research may be applied to other rechargeable batteries, supercapacitors, catalysts, and other electrochemical devices. The Raman vibrational spectra observed on these carbons show a graphitic carbon with significant disorder structure. Further, structural studies reveal a unique disordered carbon nanostructure with a higher interlayer distance of 4.5 Å compared to 3.43 Å in the commercial graphite. The carbon material derived from tires was used as an anode in lithium-ion batteries exhibited a reversible capacity of 360 mAh/g at C/3. However, the reversible capacity increased to 432 mAh/g at C/10 when this carbon particle was coated with a thin layer of carbon. In conclusion, a novel strategy of prelithiation applied for improving the first cycle efficiency to 94% is also presented.

25 ENERGY STORAGE↗

Ultra-high Information-content Chemical Imaging with Broadband Coherent Anti-Stokes Raman and Two-photon Fluorescence Lifetime Microscopy

Raman fingerprint spectroscopy and fluorescence lifetime imaging are emerging tools for studying metabolic profiles of biological specimens. While Raman fingerprint spectroscopy detects intrinsic molecular vibrations that reflect the molecular composition and chemical environment of a sample, fluorescence lifetime imaging measures changes in the excited-state lifetime of fluorophores that are sensitive to their microenvironments. Here, we present a multimodal imaging platform combining broadband coherent anti-Stokes Raman scattering (BCARS) and two-photon fluorescence lifetime imaging (2p-FLIM) microscopy that can acquire biologically relevant Raman fingerprint spectra and fluorescence lifetime signals in vivo and simultaneously. The tremendous chemical information obtained from spatially co-registered BCARS and 2p-FLIM images allows us to characterize the subtle differences between sub-cellular compartments and verify the potential false-positive results generated by fluorescence imaging alone. This is demonstrated by directly comparing the BCARS, 2p-FLIM, and two-photon excitation fluorescence(TPEF) signals simultaneously obtained from the same dye-stained organelle in the live, intact C. elegans expressing a green fluorescent protein (GFP) marker. In this work, we introduce the BCARS/2p-FLIM/TPEF setup scheme, the image acquisition steps, data processing, and representative results showing that the cross-modality imaging method enables rigorous characterization and in vivo detection at sub-cellular resolution. Furthermore, this protocol provides a framework for simultaneous chemical and fluorescence lifetime imaging to improve the accuracy of biological interpretation in complex living systems.

Xu, Haoyu [Georgia Institute of Technology, Atlant↗

The development of a fiber optic Raman temperature measurement system for rocket flows

A fiber-optic Raman diagnostic system for H2/O2 rocket flows is currently under development. This system is designed for measurements of temperature and major species concentration in the combustion chamber and part of the nozzle of a 100 Newton thrust rocket currently undergoing tests. This paper describes a measurement system based on the spontaneous Raman scattering phenomenon. An analysis of the principles behind the technique is given. Software is developed to measure temperature and major species concentration by comparing theoretical Raman scattering spectra with experimentally obtained spectra. Equipment selection and experimental approach are summarized. This experimental effort is part of a program, which is in progress, to evaluate Navier-Stokes based analyses for this class of rockets.

De Groot, Wim A.↗

The Development of a Fiber Optic Raman Temperature Measurement System for Rocket Flows

A fiberoptic Raman diagnostic system for H2/O2 rocket flows is currently under development. This system is designed for measurement of temperature and major species concentration in the combustion chamber and part of the nozzle of a 100 Newton thrust rocket currently undergoing testing. This paper describes a measurement system based on the spontaneous Raman scattering phenomenon. An analysis of the principles behind the technique is given. Software is developed to measure temperature and major species concentrations by comparing theoretical Raman scattering spectra with experimentally obtained spectra. Equipment selection and experimental approach are summarized. This experimental program is part of a program, which is in progress, to evaluate Navier-Stokes based analyses for this class of rocket.

Degroot, Wim A.↗

In-SITU Raman Spectroscopy of Single Microparticle Li-Intercalation Electrodes

Modifications in the vibrational properties of a single microparticle of LiMn2O4 induced by extraction and subsequent injection of Li(+) into the lattice have been monitored in situ via simultaneous acquisition of Raman scattering spectra and cyclic voltammetry data in 1M LiC1O4 solutions in ethylene carbonate (EC):diethyl carbonate (DEC) mixtures (1:1 by volume). Statistical analyses of the spectra in the range 15 < SOD < 45%, where SOD represents the state of discharge (in percent) of the nominally fully charged material, i.e. lambda-MnO2, were found to be consistent with the coexistence of two distinct phases of lithiated metal oxide in agreement with information derived from in situ X-ray diffraction (XRD) measurements involving more conventional battery-type electrodes.

Dokko, Kaoru↗

Rational Reprogramming of the R2 Subunit of Escherichia coli Ribonucleotide Reductase into a Self-Hydroxylating Monooxygenase

The outcome of O{sub 2} activation at the diiron(II) cluster in the R2 subunit of Escherichia coli (class I) ribonucleotide reductase has been rationally altered from the normal tyrosyl radical (Y122) production to self-hydroxylation of a phenylalanine side-chain by two amino acid substitutions that leave intact the (histidine){sub 2}-(carboxylate){sub 4} ligand set characteristic of the diiron-carboxylate family. Iron ligand Asp (D) 84 was replaced with Glu (E), the amino acid found in the cognate position of the structurally similar diiron-carboxylate protein, methane monooxygenase hydroxylase (MMOH). We previously showed that this substitution allows accumulation of a {mu}-1,2-peroxodiiron(III) intermediate, which does not accumulate in the wild-type (wt) protein and is probably a structural homologue of intermediate P (H{sub peroxo}) in O{sub 2} activation by MMOH. In addition, the near-surface residue Trp (W) 48 was replaced with Phe (F), blocking transfer of the 'extra' electron that occurs in wt R2 during formation of the formally Fe(III)Fe(IV) cluster X. Decay of the {mu}-1,2-peroxodiiron(III) complex in R2-W48F/D84E gives an initial brown product, which contains very little Y122 and which converts very slowly (t{sub 1/2} {approx} 7 h) upon incubation at 0 C to an intensely purple final product. X-ray crystallographic analysis of the purple product indicates that F208 has undergone {epsilon}-hydroxylation and the resulting phenol has shifted significantly to become a ligand to Fe2 of the diiron cluster. Resonance Raman (RR) spectra of the purple product generated with {sup 16}O{sub 2} or {sub 18}O{sub 2} show appropriate isotopic sensitivity in bands assigned to O-phenyl and Fe-O-phenyl vibrational modes, confirming that the oxygen of the Fe(III)-phenolate species is derived from O{sub 2}. Chemical analysis, experiments involving interception of the hydroxylating intermediate with exogenous reductant, and Moessbauer and EXAFS characterization of the brown and purple species establish that F208 hydroxylation occurs during decay of the peroxo complex and formation of the initial brown product. The slow transition to the purple Fe(III)-phenolate species is ascribed to a ligand rearrangement in which {mu}-O{sup 2-} is lost and the F208-derived phenolate coordinates. The reprogramming to F208 monooxygenase requires both amino acid substitutions, as very little {epsilon}-hydroxyphenylalanine is formed and pathways leading to Y122 formation predominate in both R2-D84E and R2-W48F.

03 NATURAL GAS↗

Generalized large-scale synthesis of MTiO{sub 3} (M = Ba, Sr, Pb) nanocrystals

A general hydrothermal synthesis technique has been developed for the large-scale preparation of perovskite oxide nanocrystals of BaTiO{sub 3} (BT), SrTiO{sub 3} (ST) and PbTiO{sub 3} (PT). X-ray diffraction pattern (XRD) and Raman spectrum revealed that tetragonal BT was successfully synthesized. The obtained ST and PT were in cubic and tetragonal phase, respectively. Scanning electronic microscopy (SEM) and transmission electronic microscopy (TEM) images showed that all of the products were on nanometer scale. These nanocrystals should provide an ideal candidate for fundamental studies of nanoscale ferroelectricity, piezoelectricity, and paraelectricity. Meanwhile, the synthetic strategy may be easily extended to prepare other nearly monodispersed nanocrystals of perovskite oxides or solid solutions. The relative studies are in progress and will be reported later.

36 MATERIALS SCIENCE↗

Facile synthesis of iron oxide with wormlike morphology and their application in water treatment

A novel and facile synthesis route for the manufacture of transparent and uniform nanocrystalline {alpha}-Fe{sub 2}O{sub 3} (nc-Fe{sub 2}O{sub 3}) thin films and equivalent powders with wormlike morphology is reported, utilizing ferric nitrate as the inorganic source and triblock copolymer as the wormlike morphology-directing agent through the evaporation-induced assembly (EIA) method. X-ray powder diffraction (XRD), ellipsometry, thermogravimetry-differential scanning calorimetry (TG-DSC), Raman spectrum, N{sub 2}-sorption and scanning electron microscopy (SEM) were used to study the nc-Fe{sub 2}O{sub 3} thin films and powders obtained by calcination at different temperatures. The nc-Fe{sub 2}O{sub 3} powder samples showed an excellent ability to remove heavy metal ion (Cr(VI)) in water treatment. The possible formation mechanism of the nc-Fe{sub 2}O{sub 3} with wormlike morphology was discussed. - Graphical abstract: A novel and facile synthesis route for the manufacture of transparent and uniform nanocrystalline {alpha}-Fe{sub 2}O{sub 3} (nc-Fe{sub 2}O{sub 3}) thin films or powders with wormlike morphology is reported, utilizing ferric nitrate as the inorganic source and triblock copolymer as the wormlike morphology-structure-directing agent through evaporation-induced assembly (EIA)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physical Properties of Mn{sub 2}O{sub 3} Nanoparticles Synthesized by Co-precipitation Method at Different pH Values

Mn{sub 2}O{sub 3} nanoparticles were synthesized at different pH values ranging from 10 to 13 by co-precipitation technique. The characterization of all samples were completed by X-ray diffraction (XRD), transmission electron microscopy (TEM), energy-dispersive X-ray (EDX), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR), ultraviolet-absorption spectroscopy (UV), Raman spectroscopy, and M–H loop measurements. The XRD spectra show that the structure of Mn{sub 2}O{sub 3} is cubic, and the lattice parameter a decreases as pH increases. Crystalline size, determined from TEM and XRD analyses, decreases as pH increases. TGA curves show that a mass loss is significantly affected as pH increases, indicating the decomposition of organic species besides the oxidation of Mn{sub 2}O{sub 3} to Mn{sub 3}O{sub 4}. FTIR spectra indicate that the absorption peaks at 593.73 and 519.09 cm{sup − 11} referred to the stretching vibration of Mn–O and Mn–O–Mn bonds during the synthesis of Mn{sub 2}O{sub 3} nanoparticles. UV-visible spectroscopy is measured in the range 250–800 nm and showed a deviation to the lower wavelength in addition to an increase in the band-gap energy (E{sub g}) values from 1.012 to 1.370 eV is obtained. Raman spectra shows a slight deviation to the left which is conversely proportional to the crystalline size. M–H loops for the prepared samples were measured and the results of retentivity (M{sub s}) and coercivity (H{sub c}) were discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Optical Vibrational Spectroscopic Investigation of Natural and Synthetic Analogs of Uranyl Oxyhydroxyhydrate Minerals

Uranyl oxy-hydroxy-hydrate minerals are common alteration products of uraninite (UO2+x) which is chemically and structurally analogous to uranium dioxide nuclear fuel. Therefore, structural and spectroscopic investigations of these alteration minerals and their analogous anthropogenic counterparts can provide insight into the environmental behavior of nuclear fuel cycle materials. Previously, we compiled available vibrational spectroscopic data for uranyl minerals in the Compendium of Uranium Raman and Infrared Experimental Spectra (CURIES) and found that only 37% of known uranyl oxy-hydroxy-hydrate minerals had spectra readily available in the literature and existing databases for inclusion therein. Furthermore, no available infrared spectra for this mineral group were included in CURIES. To expand our understanding of the spectroscopic features of uranyl oxy-hydroxy-hydrates and the structural origins thereof, we collected, and now include in CURIES, Raman and infrared spectra for an additional 12 uranyl hydroxide phases. To better understand the impact of structural and compositional variations of these phases on their spectroscopic features, we compare Raman spectra of different anion sheet topological groups and of analogous phases hosting different counter cations. We identify spectroscopic variations related to differences in equatorial bonding and structural changes as a result of cation substitution. We also prepare a uranyl hydroxide phase via hydrolysis of uranyl fluoride (UO2F2) as an analog of hydrolysis reactions that occur in nuclear fuel cycle materials; and we find that the alteration product of UO2F2, despite chemical and structural similarities to uranyl oxy-hydroxy-hydrate minerals, is readily distinguishable from related mineral phases using Raman spectroscopy. In this work, we provide new insights into the structural origins of spectroscopic features in uranyl oxy-hydroxy-hydrate minerals, improve the average Raman spectrum for this group of minerals, and thereby improve capabilities for identifying these mineral species and related anthropogenic phases using Raman spectroscopy.

Barth, Brodie [ORNL] (ORCID:0000000256142601)↗

Raman and Infrared Spectroscopy of Pyridine under High Pressure

We report the structural transitions of pyridine as a function of pressure up to 26 GPa using in situ Raman spectroscopy and infrared absorption spectroscopy. By monitoring changes in the Raman shifts in the lattice region as well as the band profiles in both Raman and IR spectra, a liquid-to-solid transition at 1 GPa followed by solid-to-solid transitions at 2, 8, 11, and 16 GPa were observed upon compression. These transitions were found to be reversible upon decompression from 22 GPa. A further chemical transformation was observed when compressed beyond 22 GPa as evidenced by the substantial and irreversible changes in the Raman and infrared spectra, which could be attributed to the destruction of the ring structure. The observed transformations in pyridine were also compared to those for benzene. The similar transition sequence with well-aligned transition pressures suggests that these isoelectronic aromatics may have similar structures and stabilities under high pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Li Isotope Signatures using Optical Spectroscopies

The primary goal of this work is to investigate the detection capabilities of laser ablation molecular isotopic spectrometry (LAMIS) and Raman spectroscopy for lithium isotopic determination as related to Li enrichment activities. LAMIS is an emerging spectroscopic technique that takes advantage of the fact that molecules exhibit much larger isotopic wavelength shifts in molecular emission spectra than their atomic counterparts. Raman spectroscopy has been shown to exhibit isotopic shifts if a given molecular vibration involves the isotope of interest. Both techniques are comprised of the same basic hardware: a spectrometer, a laser system (pulsed for LAMIS, pulsed or CW for Raman), and an intensified charge-coupled device (ICCD). Shifts in Raman spectra due to lithium isotopes in Li 2 C0 3 and LiOH*H 2 0 were observed. LAMIS measurements of the same compounds have not been successful yet, as no lithium containing molecular emissions have been identified to this point. However, an isotopic shift of the self-reversal of an atomic lithium emission was observed, which is another optical technique used to measure isotopes.

07 ISOTOPE AND RADIATION SOURCES↗