Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Process Sample Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Lead Isotope Fingerprinting of Nanoscale Mineral Particles via Single Particle Inductively Coupled Plasma Mass Spectrometry

Determining lead (Pb) isotopic ratios is of broad interest across chemical disciplines for source tracing and age determinations, but the technique is inherently limited when multiple sources of Pb are present in a single sample. Single particle methods offer a solution to directly resolve multiple distinct isotopic ratios within individual samples. In this study, single particle inductively coupled plasma-mass spectrometry (spICP-MS) was performed using time-of-flight (TOF) and multicollector (MC)-based platforms to measure the Pb isotopic composition of individual nanoscale particles. Distinct Pb isotope ratios were measured in particles from four powdered galena samples of different origins (average single-particle 206Pb/207Pb ratios ranging from 0.91 to 1.28) using both the TOF and the MC-based platforms. Differentiation of galena particles in a mixture (liberated grains and those hosted in a silicate matrix) was possible due to detecting their unique multielemental fingerprints. The differing behavior of the two galena samples during digestion was investigated; undigested galena particles trapped within silicate minerals were detected using spICP-MS, which has implications for Pb recovery in bulk-scale isotopic analysis. The multinuclide detection capability of the ICP-TOF-MS instrument allowed for the simultaneous detection of secondary constituent elements within the nanoparticles and the identification of multiple populations of isotopically distinct Pb-bearing particles in a copper ore sample, whereas the increased sensitivity of the MC instrument enabled quantification of 204Pb, allowing differentiation using multiple isotopic ratios. A single particle isotope ratio analysis module was developed within an open-source spICP-TOF-MS data processing platform, enabling its adoption across chemical disciplines.

Goodman, Aaron J. [University of Montreal, Quebec,↗
DOE OSTI2014

Soft x-ray ionization induced fragmentation of glycine

X-ray absorption commonly involves dissociative core ionization producing not only momentum correlated charged fragments but also low- and high-energy electrons capable of inducing damage in living tissue. This gives a natural motivation for studying the core ionization induced fragmentation processes in biologically important molecules such as amino acids. Here the fragmentation of amino acid glycine following carbon 1s core ionization has been studied. Using photoelectron-photoion-photoion coincidence technique, a detailed analysis on fragmentation of the sample molecule into pairs of momentum correlated cations has been carried out. The main characteristics of core ionization induced fragmentation of glycine were found to be the rupture of the C–C{sub α} bond and the presence of the CNH{sub 2}{sup +} fragment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Synthesis and field emission behaviour of well faceted In{sub 2}Se{sub 3} micro-crystals

Here in, we report synthesis of crystalline Indium Selenide (In{sub 2}Se{sub 3}) elegant microcrystals on Au coated Si substrates using one-step facile thermal evaporation route and their field emission investigations. The as-synthesized In{sub 2}Se{sub 3} micro-crystals were subjected to structural and morphological analysis prior to the field emission studies. The XRD spectrum of the as-synthesized product reveals formation of crystalline hexagonal phase of In{sub 2}Se{sub 3} under the prevailing experimental conditions. Under optimized process variables, the morphology of the as-synthesized product is characterized by presence of well facetted micron size particles of In2Se3. Furthermore, the EDAX analysis confirms the presence of In and Se in the as-synthesized sample. The field emission characteristic of the In{sub 2}Se{sub 3} micro-crystal emitter is found to be superior to the other metal chalcogenides micro-crystal based emitters. The synthesized In{sub 2}Se{sub 3} micro-crystals emitter delivers current density of ∼ 225 µA/cm{sup 2} at an applied electric field of ∼ 7.44 V/µm. The emission current stability investigated at pre-set value of ∼ 3 µA is observed to be fairly good. These observed results demonstrate potential of the In{sub 2}Se{sub 3} cathode as an electron source for practical applications in vacuum microelectronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2018

The Physcomitrella patens gene atlas project: large-scale RNA-seq based expression data

High-throughput RNA sequencing (RNA-seq) has recently become the method of choice to define and analyze transcriptomes. For the model moss Physcomitrella patens, although this method has been used to help analyze specific perturbations, no overall reference dataset has yet been established. In the framework of the Gene Atlas project, the Joint Genome Institute selected P. patens as a flagship genome, opening the way to generate the first comprehensive transcriptome dataset for this moss. The first round of sequencing described here is composed of 99 independent libraries spanning 34 different developmental stages and conditions. Upon dataset quality control and processing through read mapping, 28 509 of the 34 361 v3.3 gene models (83%) were detected to be expressed across the samples. Differentially expressed genes (DEGs) were calculated across the dataset to permit perturbation comparisons between conditions. The analysis of the three most distinct and abundant P. patens growth stages - protonema, gametophore and sporophyte - allowed us to define both general transcriptional patterns and stage-specific transcripts. As an example of variation of physico-chemical growth conditions, we detail here the impact of ammonium supplementation under standard growth conditions on the protonemal transcriptome. Finally, the cooperative nature of this project allowed us to analyze inter-laboratory variation, as 13 different laboratories around the world provided samples. We compare differences in the replication of experiments in a single laboratory and between different laboratories.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

ESS-DIVE Reporting Format for Amplicon Abundance Table

While standardized sequencing data is available in public repositories and efforts such as MIxS for common sample collection and processing metadata are well established, the lack of common bioinformatic processing metadata has hindered the ability to do large-scale metaanalyses and the potential for data re-use by non-experts such as ecosystem, watershed, or earth system modelers. To address this need for Department of Energy researchers, we have developed an amplicon reporting format which captures both sample preparation and bioinformatic processing metadata and stores processed amplicon data as a paired abundance table and sequencing file to maximize the potential for re-use of these data. To aid in the adoption of accessible and reproducible analysis workflows, this reporting format was developed in concert with amplicon functionality within the Department of Energy’s Systems Biology Knowledgebase (KBase) to ensure common data and metadata requirements and facilitate seamless transfer between these platforms.This dataset contains support documentation for the amplicon reporting format (README.md and instructions.md), templates for both bioinformatic and sequencing metadata (amplicon_bioinformatic_metadata_template_2021_10_03.csv and amplicon_sequencing_metadata_template_2021_10_03.csv), a crosswalk indicating how this reporting format relates to the current MIxS format (ESSDIVE-MIxS_crosswalk.csv), a list of available instrument terms (amplicon_seq_instrument_terms_2021_10_03.csv), a map between QIIME2 parameter settings and metadata fields (amplicon_qiime2_plugin_metadata_map.csv), a data dictionary (amplicon_CSV_dd.csv), and file-level metadata (amplicon_FLMD.csv).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2013

NREL Invention Speeds Solar Cell Quality Testing for Industry [Fact Sheet]

A solid-state optical system, invented by the National Renewable Energy Laboratory (NREL), measures solar cell quantum efficiency (QE) in less than a second, enabling a suite of new capabilities for solar cell manufacturers. QE is a measurement of how cells respond to light across the solar spectrum, but traditional methods for measuring QE had been too slow, limiting its application to small samples pulled from the production line and analyzed in laboratories. NREL's technique, commercialized by Tau Science as the FlashQE(TM) system, uses a solid-state light source, synchronized electronics, and advanced mathematical analysis to parallel-process QE data in a tiny fraction of the time required by the current method, allowing its use on every solar cell passing through a production line.

14 SOLAR ENERGY↗
DOE OSTI2015

Campaign 1.7 Pu Aging. Development of Time of Flight Secondary Ion Mass Spectroscopy

The first application of Time-of-Flight Secondary Ion Mass Spectroscopy (ToF-SIMS) to an aged plutonium surface has resulted in a rich set of surface chemistry data, as well as some unexpected results. FY15 was highlighted by not only the first mapping of hydrogen-containing features within the metal, but also a prove-in series of experiments using the system’s Sieverts Reaction Cell. These experiments involved successfully heating the sample to ~450 oC for nearly 24 hours while the sample was dosed several times with hydrogen, followed by an in situ ToF-SIMS analysis. During this year, the data allowed for better and more consistent identification of the myriad peaks that result from the SIMS sputter process. In collaboration with the AWE (U.K), the system was also fully aligned for sputter depth profiling for future experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A Computed Tomography Automation Architecture Developed from a Comprehensive Literature Review

This paper presents a literature review on techniques related to the computed tomography procedure that incorporate automation elements in their research investigations or industrial applications. Computed tomography (CT) is a non-destructive testing (NDT) technique in that the imaging and inspection are performed without damaging the sample, allowing for additional or repeated analysis if necessary. The reviewed literature is organized based on the steps associated with a general NDT task in order to define an end-to-end computed tomography automation architecture. The process steps include activities prior to image collection, during the scan, and after the data are collected. It further reviews efforts related to repeating this process based on a previous scan result. By analyzing the multiple existing but disparate efforts found in the literature, we present a framework for fully automating NDT procedures and discuss the remaining technical gaps in the developed framework.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1972

Rebalance loop analysis

The analysis of the pulse rebalance loop where the pulses are of constant amplitude type is presented. Properties of such systems are discussed. Sensor errors caused by the distortion of the pulse shape, the dc bias, and the sampling process are analyzed.

Hung, J. C.↗
NASA NTRS1988

Fine-scale traverses in cumulate rocks, Stillwater Complex: A lunar analogue study

The objective was to document finite-scale compositional variations in cumulate rocks from the Stillwater Complex in Montana and to interpret these data in the context of planetary magma fractionation processes such as those operative during the formation of the Earth's Moon. This research problem involved collecting samples in the Stillwater Complex and analyzing them by electron microprobe, X-ray fluorescence (XRF), and instrumental neutron activation analysis (INAA). The electron microprobe is used to determine the compositions of cumulus and intercumulus phases in the rocks, the XRF is used to determine the bulk-rock major element and trace element (Y, Sr, Rb, Zr, Ni, and Cr) abundances, and the INAA lab. is used to determine the trace element (Sc, Co, Cr, Ni, Ta, Hf, U, Th, and the REE) abundances of mineral separates and bulk rocks.

Elthon, Donald↗
NASA NTRS1992

Utilization of biosensors and chemical sensors for space applications

There will be a need for a wide array of chemical sensors for biomedical experimentation and for the monitoring of water and air recycling processes on Space Station Freedom. The infrequent logistics flights of the Space Shuttle will necessitate onboard analysis. The advantages of biosensors and chemical sensors over conventional analysis onboard spacecraft are manifold. They require less crew time, space, and power. Sample treatment is not needed. Real time or near-real time monitoring is possible, in some cases on a continuous basis. Sensor signals in digitized form can be transmitted to the ground. Types and requirements for chemical sensors to be used in biomedical experimentation and monitoring of water recycling during long-term space missions are discussed.

Bonting, S. L.↗
NASA NTRS1997

Redox Energy and Sulfur Chemistry in Prebiotic Polymer Synthesis and Replication

In the past year we have made significant progress in three research areas: (1) Most importantly, we discovered a new pathway of prebiotic amino acid synthesis in which formaldehyde and glycolaldehyde (substrates of the formose reaction) react with ammonia yielding alanine and homoserine in the presence of thiol catalysts. This thiol-dependent synthesis of amino acids undoubtedly occurs via amino acid thioester intermediates capable of forming peptides. This 'one-pot' reaction system operates under mild aqueous conditions, and like modern amino acid biosynthesis, uses sugar intermediates which are converted to amino acids by energy-yielding redox disproportionation. (2) Finally, in preparation for the analysis of Martian meteorite samples, we upgraded our HPLC system and developed an improved method capable of detecting a I femtomole of amino acid enantiomers. (3) We completed our analysis of the energetics of metabolism that revealed that life depends on biosynthetic processes driven by chemical energy made available by the redox disproportionation of carbon groups of sugars. We established that the favorable energy of redox disproportionation is based on the universal reduction potentials of carbon groups. We concluded that it is hard to imagine any other organic molecule besides sugars (formaldehyde oligomers) having the energy and reactivity needed to drive either modem biosynthesis or the chemical processes behind its origin.

Weber, Arthur L.↗
NASA NTRS1998

Low-Cost Production of Composite Bushings for Jet Engine Applications

The objectives of this research program were to reduce the manufacturing costs of variable stator vane bushings by 1) eliminating the expensive carbon fiber braiding operation, 2) replacing the batch mode impregnation, B-stage, and cutting operations with a continuous process, and 3) reducing the molding cycle and machining operations with injection molding to achieve near-net shapes. Braided bushings were successfully fabricated with both AMB-17XLD and AMB-TPD resin systems. The composite bushings achieved high glass transition temperature after post-cure (+300 C) and comparable weight loss to the PNM-15 bushings. ANM-17XLD bushings made with "batch-mode" molding compound (at 0.5 in. fiber length) achieved a +300 lb-force flange break strength which was superior to the continuous braided-fiber reinforced bushing. The non-MDA resin technology developed in this contract appears attractive for bushing applications that do not exceed a 300 C use temperature. Two thermoplastic polyimide resins were synthesized in order to generate injection molding compound powders. Excellent processing results were obtained at injection temperatures in excess of 300 C. Micro-tensile specimens were produced from each resin type and the Tg measurements (by TMA) for these samples were equivalent to AURUM(R). Thermal Gravimetric Analysis (TGA) conducted at 10 C/min showed that the non-MDA AMB-type polyimide thermoplastics had comparable weight loss to PMR-15 up to 500 C.

Gray, Robert A.↗
NASA NTRS1997

Tailoring Silicon Oxycarbide Glasses for Oxidative Stability

Blackglas(Trademark) polysiloxane systems produce silicon oxycarbide glasses by pyrolysis in inert atmosphere. The silicon oxycarbides evidence oxidative degradation that limits their lifetime as composite matrices. The present study characterizes bonding rearrangements in the oxycarbide network accompanying increases in pyrolysis temperature. It also addresses the changes in susceptibility to oxidation due to variations in the distribution of Si bonded species obtained under different processing conditions. The study is carried out using Si-29 nuclear magnetic resonance (NMR) spectroscopy and a design of experiments approach to model the oxidation behavior. The NMR results are compared with those obtained by thermogravimetric analysis (TGA). Samples pyrolyzed under inert conditions are compared to those pyrolyzed in reactive ammonia environments.

Hurwitz, F. I.↗
NASA NTRS1999

The ISO-IRAS Faint Galaxy Survey

As part of the ISO-IRAS Faint Galaxy Survey ISO Satellite observations of over 600 IRAS sources have been obtained with the ISOCAM instrument. Because our survey strategy involved relatively short integrations, great care was required in developing analysis software including cosmic-ray and transient removal and calibration. These observations have now been through final pipeline processing at IPAC and ground-based follow-up is ongoing. The observations are for sources from two samples: a " Filler' sample selected to be at z greater than 0.1 and a fainter sample which selected for the highest redshift galaxies in the IRAS survey, with redshifts 0.2 less than z less than 1.0. I now have obtained ground-based follow-up spectrophotometry at Lick and Palomar observatories for 100 LFIRGs with 0.1 less than z less than 0.7. Our observations have confirmed that these systems are comparable to nearby LFIRGs such as Arp 220, with L (sub -)(fir) greater than 10(exp 11) L(sub -) sun and typically HII/Liner optical excitation. About 10% of the galaxies show true AGN (Sy2) excitation. Based on our work on a nearby complete sample of LFIRGS, we believe that the majority of these systems are luminous Starbursts, thus this project is tracing the luminous end of the galaxy star-forming luminosity function - the (infrared) star-formation history of the Universe to z approx. 1, a topic of some considerable recent interest. A by-product of these ISOCAM observations is approximately 1 square degree of deep 2 microns pointings outside the IRAS error boxes, allowing us an independent estimate of the mid-infrared log N - log S relation. Ground-based observations of this sample are continuing.

Smith, Harding E.↗
NASA NTRS2020

The Renazzo-like Carbonaceous Chondrites as Resources to Understand the Origin, Evolution, and Exploration of the Solar System

We present here a review of the characteristics of CR carbonaceous chondrite meteorites. Over the past three decades, our knowledge and understanding of the scientific value of the CR chondrites have increased dramatically, as more samples from cold and hot deserts have become available for analysis. Based on a variety of compositional, mineralogical, isotopic, and spectroscopic studies, we have come to understand that CR chondrites are excellent samples of asteroidal meteorites to look for virtually unaltered solar nebula material and to observe asteroidal processes in progress. This paper summarizes these investigations, their similarities, and differences with other chondritic groups, their relationships to asteroids, and the questions yet to be addressed

N. M. Abreu↗
DOE OSTI2013

ESTIMATING IMPURITIES IN SURPLUS PLUTONIUM FOR DISPOSITION

The United States holds at least 61.5 metric tons (MT) of plutonium that is permanently excess to use in nuclear weapons programs, including 47.2 MT of weapons-grade plutonium. Surplus inventories will be stored safely by the Department of Energy (DOE) and then transferred to facilities that will prepare the plutonium for permanent disposition. The Savannah River National Laboratory (SRNL) operates a Feed Characterization program for the Office of Fissile Materials Disposition of the National Nuclear Security Administration and the DOE Office of Environmental Management. Many of the items that require disposition are only partially characterized, and SRNL uses a variety of techniques to predict the isotopic and chemical properties that are important for processing through the Mixed Oxide Fuel Fabrication Facility and alternative disposition paths. Recent advances in laboratory tools, including Prompt Gamma Analysis and Peroxide Fusion treatment, provide data on the existing inventories that will enable disposition without additional, costly sampling and destructive analysis.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2015

Enhanced spot preparation for liquid extractive sampling and analysis

A method for performing surface sampling of an analyte, includes the step of placing the analyte on a stage with a material in molar excess to the analyte, such that analyte-analyte interactions are prevented and the analyte can be solubilized for further analysis. The material can be a matrix material that is mixed with the analyte. The material can be provided on a sample support. The analyte can then be contacted with a solvent to extract the analyte for further processing, such as by electrospray mass spectrometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗